android_kernel_motorola_sm6225/drivers/usb
Sarah Sharp f217c980ca xhci: Don't enable/disable RWE on bus suspend/resume.
The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable
remote wakeup for devices in the lower power link state L1.  It has
nothing to do with the device suspend remote wakeup from L2.  The RWE
bit is designed to be set once (when USB 2.0 LPM is enabled for the
port) and cleared only when USB 2.0 LPM is disabled for the port.

The xHCI bus suspend method was setting the RWE bit erroneously, and the
bus resume method was clearing it.  The xHCI 1.0 specification with
errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware
Controlled LPM":

"While Hardware USB2 LPM is enabled, software shall not modify the
HIRDBESL or RWE fields of the USB2 PORTPMSC register..."

If we have previously enabled USB 2.0 LPM for a device, that means when
the USB 2.0 bus is resumed, we violate the xHCI specification by
clearing RWE.  It also means that after a bus resume, the host would
think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM
enabled, which is not what we want.

This patch should be backported to kernels as old as 3.2, that
contain the commit 65580b4321 "xHCI: set
USB2 hardware LPM".  That was the first kernel that supported USB 2.0
Link PM.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
2013-10-09 16:26:55 -07:00
..
atm usb: atm: speedtch: be careful with bInterval 2013-07-25 11:49:30 -07:00
c67x00 USB: c67x00: use dev_get_platdata() 2013-07-31 17:28:44 -07:00
chipidea usb: chipidea: add Intel Clovertrail pci id 2013-10-03 15:41:54 -07:00
class USB: usbtmc: fix up attribute permissions 2013-08-25 15:12:03 -07:00
core usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit 2013-09-25 17:30:39 -07:00
dwc3 usb: dwc3: add support for Merrifield 2013-09-26 16:22:29 -07:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: fixes for v3.12-rc4 2013-10-01 14:22:05 -07:00
host xhci: Don't enable/disable RWE on bus suspend/resume. 2013-10-09 16:26:55 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc Merge 3.11-rc6 into usb-next 2013-08-18 20:33:01 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: dsps: do not bind to "musb-hdrc" 2013-10-01 09:02:09 -05:00
phy usb: phy: gpio-vbus: fix deferred probe from __init 2013-09-23 14:29:50 -05:00
renesas_usbhs Remove GENERIC_HARDIRQ config option 2013-09-13 15:09:52 +02:00
serial USB: serial: option: Ignore card reader interface on Huawei E1750 2013-09-30 19:00:35 -07:00
storage USB storage: audit sysfs attribute permissions 2013-08-27 13:13:07 -07:00
wusbcore Merge 3.11-rc6 into usb-next 2013-08-18 20:33:01 -07:00
Kconfig usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs. 2013-08-12 12:18:38 -07:00
Makefile usb: patches for v3.12 merge window 2013-08-13 15:28:01 -07:00
README
usb-common.c usb: common: introduce of_usb_get_maximum_speed() 2013-07-29 13:56:46 +03:00
usb-skeleton.c USB: usb-skeleton.c: add retry for nonblocking read 2013-07-25 12:01:13 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.