6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
267 lines
6.8 KiB
C
267 lines
6.8 KiB
C
/*
|
|
* linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002
|
|
*
|
|
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* This a look-a-like variation of the ICH0 PIIX4 Ultra-66,
|
|
* but this keeps the ISA-Bridge and slots alive.
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
static u8 slc90e66_ratemask (ide_drive_t *drive)
|
|
{
|
|
u8 mode = 2;
|
|
|
|
if (!eighty_ninty_three(drive))
|
|
mode = min(mode, (u8)1);
|
|
return mode;
|
|
}
|
|
|
|
static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
|
|
switch(xfer_rate) {
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_2:
|
|
case XFER_UDMA_1:
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2:
|
|
case XFER_PIO_4:
|
|
return 4;
|
|
case XFER_MW_DMA_1:
|
|
case XFER_PIO_3:
|
|
return 3;
|
|
case XFER_SW_DMA_2:
|
|
case XFER_PIO_2:
|
|
return 2;
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_1:
|
|
case XFER_SW_DMA_0:
|
|
case XFER_PIO_1:
|
|
case XFER_PIO_0:
|
|
case XFER_PIO_SLOW:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Based on settings done by AMI BIOS
|
|
* (might be useful if drive is not registered in CMOS for any reason).
|
|
*/
|
|
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
int is_slave = (&hwif->drives[1] == drive);
|
|
int master_port = hwif->channel ? 0x42 : 0x40;
|
|
int slave_port = 0x44;
|
|
unsigned long flags;
|
|
u16 master_data;
|
|
u8 slave_data;
|
|
/* ISP RTC */
|
|
static const u8 timings[][2]= {
|
|
{ 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
if (is_slave) {
|
|
master_data = master_data | 0x4000;
|
|
if (pio > 1)
|
|
/* enable PPE, IE and TIME */
|
|
master_data = master_data | 0x0070;
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
|
|
slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
|
|
} else {
|
|
master_data = master_data & 0xccf8;
|
|
if (pio > 1)
|
|
/* enable PPE, IE and TIME */
|
|
master_data = master_data | 0x0007;
|
|
master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
}
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
if (is_slave)
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
}
|
|
|
|
static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u8 maslave = hwif->channel ? 0x42 : 0x40;
|
|
u8 speed = ide_rate_filter(slc90e66_ratemask(drive), xferspeed);
|
|
int sitre = 0, a_speed = 7 << (drive->dn * 4);
|
|
int u_speed = 0, u_flag = 1 << drive->dn;
|
|
u16 reg4042, reg44, reg48, reg4a;
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
pci_read_config_word(dev, 0x44, ®44);
|
|
pci_read_config_word(dev, 0x48, ®48);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break;
|
|
case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break;
|
|
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
|
|
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
|
|
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
|
|
case XFER_MW_DMA_2:
|
|
case XFER_MW_DMA_1:
|
|
case XFER_SW_DMA_2: break;
|
|
case XFER_PIO_4:
|
|
case XFER_PIO_3:
|
|
case XFER_PIO_2:
|
|
case XFER_PIO_0: break;
|
|
default: return -1;
|
|
}
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
if (!(reg48 & u_flag))
|
|
pci_write_config_word(dev, 0x48, reg48|u_flag);
|
|
/* FIXME: (reg4a & a_speed) ? */
|
|
if ((reg4a & u_speed) != u_speed) {
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
pci_write_config_word(dev, 0x4a, reg4a|u_speed);
|
|
}
|
|
} else {
|
|
if (reg48 & u_flag)
|
|
pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
|
|
if (reg4a & a_speed)
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
}
|
|
|
|
slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed));
|
|
return (ide_config_drive_speed(drive, speed));
|
|
}
|
|
|
|
static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
|
|
{
|
|
u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive));
|
|
|
|
if (!(speed)) {
|
|
u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
|
|
speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed);
|
|
}
|
|
|
|
(void) slc90e66_tune_chipset(drive, speed);
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
drive->init_speed = 0;
|
|
|
|
if (id && (id->capability & 1) && drive->autodma) {
|
|
|
|
if (ide_use_dma(drive)) {
|
|
if (slc90e66_config_drive_for_dma(drive))
|
|
return hwif->ide_dma_on(drive);
|
|
}
|
|
|
|
goto fast_ata_pio;
|
|
|
|
} else if ((id->capability & 8) || (id->field_valid & 2)) {
|
|
fast_ata_pio:
|
|
hwif->tuneproc(drive, 5);
|
|
return hwif->ide_dma_off_quietly(drive);
|
|
}
|
|
/* IORDY not supported */
|
|
return 0;
|
|
}
|
|
|
|
static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
|
|
{
|
|
u8 reg47 = 0;
|
|
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
|
|
|
|
hwif->autodma = 0;
|
|
|
|
if (!hwif->irq)
|
|
hwif->irq = hwif->channel ? 15 : 14;
|
|
|
|
hwif->speedproc = &slc90e66_tune_chipset;
|
|
hwif->tuneproc = &slc90e66_tune_drive;
|
|
|
|
pci_read_config_byte(hwif->pci_dev, 0x47, ®47);
|
|
|
|
if (!hwif->dma_base) {
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
return;
|
|
}
|
|
|
|
hwif->atapi_dma = 1;
|
|
hwif->ultra_mask = 0x1f;
|
|
hwif->mwdma_mask = 0x07;
|
|
hwif->swdma_mask = 0x07;
|
|
|
|
if (!(hwif->udma_four))
|
|
/* bit[0(1)]: 0:80, 1:40 */
|
|
hwif->udma_four = (reg47 & mask) ? 0 : 1;
|
|
|
|
hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t slc90e66_chipset __devinitdata = {
|
|
.name = "SLC90E66",
|
|
.init_hwif = init_hwif_slc90e66,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
|
|
.bootable = ON_BOARD,
|
|
};
|
|
|
|
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_setup_pci_device(dev, &slc90e66_chipset);
|
|
}
|
|
|
|
static struct pci_device_id slc90e66_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "SLC90e66_IDE",
|
|
.id_table = slc90e66_pci_tbl,
|
|
.probe = slc90e66_init_one,
|
|
};
|
|
|
|
static int slc90e66_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(slc90e66_ide_init);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
|
|
MODULE_LICENSE("GPL");
|