851 lines
19 KiB
Text
851 lines
19 KiB
Text
|
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 and
|
||
|
|
* only version 2 as published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "msm8996-pinctrl.dtsi"
|
||
|
|
#include "apq8096-camera-sensor-dragonboard.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
bluetooth: bt_qca6174 {
|
||
|
|
compatible = "qca,qca6174";
|
||
|
|
qca,bt-reset-gpio = <&pm8994_gpios 19 0>; /* BT_EN */
|
||
|
|
qca,bt-vdd-core-supply = <&vph_pwr_vreg>;
|
||
|
|
qca,bt-vdd-pa-supply = <&vph_pwr_vreg>;
|
||
|
|
qca,bt-vdd-io-supply = <&pm8994_s4>;
|
||
|
|
qca,bt-vdd-xtal-supply = <&vph_pwr_vreg>;
|
||
|
|
qca,bt-chip-pwd-voltage-level = <1300000 1300000>;
|
||
|
|
qca,bt-vdd-io-voltage-level = <1800000 1800000>;
|
||
|
|
qca,bt-vdd-xtal-voltage-level = <1800000 1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs_ice {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdcc1_ice {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufsphy1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uartblsp2dm1 {
|
||
|
|
status = "ok";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart_console_active>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_1 {
|
||
|
|
vdd-supply = <&pm8994_l20>;
|
||
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
||
|
|
qcom,vdd-current-level = <200 570000>;
|
||
|
|
|
||
|
|
vdd-io-supply = <&pm8994_s4>;
|
||
|
|
qcom,vdd-io-always-on;
|
||
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||
|
|
qcom,vdd-io-current-level = <110 325000>;
|
||
|
|
|
||
|
|
pinctrl-names = "active", "sleep";
|
||
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
|
||
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
|
||
|
|
|
||
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000
|
||
|
|
96000000 192000000 384000000>;
|
||
|
|
qcom,ice-clk-rates = <300000000 150000000>;
|
||
|
|
qcom,nonremovable;
|
||
|
|
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
|
||
|
|
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhc_2 {
|
||
|
|
vdd-supply = <&pm8994_l21>;
|
||
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
||
|
|
qcom,vdd-current-level = <200 800000>;
|
||
|
|
|
||
|
|
vdd-io-supply = <&pm8994_l13>;
|
||
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
||
|
|
qcom,vdd-io-current-level = <200 22000>;
|
||
|
|
|
||
|
|
pinctrl-names = "active", "sleep";
|
||
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||
|
|
|
||
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000
|
||
|
|
100000000 200000000>;
|
||
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
||
|
|
|
||
|
|
cd-gpios = <&tlmm 95 0x1>;
|
||
|
|
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_vadc {
|
||
|
|
chan@5 {
|
||
|
|
label = "vcoin";
|
||
|
|
reg = <5>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7 {
|
||
|
|
label = "vph_pwr";
|
||
|
|
reg = <7>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@73 {
|
||
|
|
label = "msm_therm";
|
||
|
|
reg = <0x73>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@74 {
|
||
|
|
label = "emmc_therm";
|
||
|
|
reg = <0x74>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@75 {
|
||
|
|
label = "pa_therm0";
|
||
|
|
reg = <0x75>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@77 {
|
||
|
|
label = "pa_therm1";
|
||
|
|
reg = <0x77>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@78 {
|
||
|
|
label = "quiet_therm";
|
||
|
|
reg = <0x78>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7c {
|
||
|
|
label = "xo_therm_buf";
|
||
|
|
reg = <0x7c>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <4>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_adc_tm {
|
||
|
|
chan@73 {
|
||
|
|
label = "msm_therm";
|
||
|
|
reg = <0x73>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x48>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@74 {
|
||
|
|
label = "emmc_therm";
|
||
|
|
reg = <0x74>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x68>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@75 {
|
||
|
|
label = "pa_therm0";
|
||
|
|
reg = <0x75>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x70>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@77 {
|
||
|
|
label = "pa_therm1";
|
||
|
|
reg = <0x77>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x78>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@78 {
|
||
|
|
label = "quiet_therm";
|
||
|
|
reg = <0x78>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <2>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x80>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@7c {
|
||
|
|
label = "xo_therm_buf";
|
||
|
|
reg = <0x7c>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <0>;
|
||
|
|
qcom,calibration-type = "ratiometric";
|
||
|
|
qcom,scale-function = <4>;
|
||
|
|
qcom,hw-settle-time = <2>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
qcom,btm-channel-number = <0x88>;
|
||
|
|
qcom,thermal-node;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_hdmi_tx {
|
||
|
|
pinctrl-names = "hdmi_hpd_active", "hdmi_ddc_active", "hdmi_cec_active",
|
||
|
|
"hdmi_active", "hdmi_sleep";
|
||
|
|
pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_suspend
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
pinctrl-1 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
pinctrl-2 = <&mdss_hdmi_hpd_active &mdss_hdmi_cec_active
|
||
|
|
&mdss_hdmi_ddc_suspend>;
|
||
|
|
pinctrl-3 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
||
|
|
&mdss_hdmi_cec_active>;
|
||
|
|
pinctrl-4 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend
|
||
|
|
&mdss_hdmi_cec_suspend>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_vadc {
|
||
|
|
chan@0 {
|
||
|
|
label = "usbin";
|
||
|
|
reg = <0>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <4>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@1 {
|
||
|
|
label = "dcin";
|
||
|
|
reg = <1>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <4>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@43 {
|
||
|
|
label = "usb_dp";
|
||
|
|
reg = <0x43>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
chan@44 {
|
||
|
|
label = "usb_dm";
|
||
|
|
reg = <0x44>;
|
||
|
|
qcom,decimation = <0>;
|
||
|
|
qcom,pre-div-channel-scaling = <1>;
|
||
|
|
qcom,calibration-type = "absolute";
|
||
|
|
qcom,scale-function = <0>;
|
||
|
|
qcom,hw-settle-time = <0>;
|
||
|
|
qcom,fast-avg-setup = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "msm8996-mdss-panels.dtsi"
|
||
|
|
|
||
|
|
&dsi_hx8379a_fwvga_truly_vid {
|
||
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
||
|
|
qcom,mdss-dsi-bl-max-level = <255>;
|
||
|
|
qcom,mdss-dsi-bl-pmic-pwm-frequency = <50>;
|
||
|
|
qcom,mdss-dsi-bl-pmic-bank-select = <0>;
|
||
|
|
qcom,mdss-dsi-pwm-gpio = <&pm8994_gpios 5 0>;
|
||
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_mdp {
|
||
|
|
qcom,mdss-pref-prim-intf = "dsi";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi {
|
||
|
|
hw-config = "single_dsi";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi0 {
|
||
|
|
qcom,dsi-pref-prim-pan = <&dsi_hx8379a_fwvga_truly_vid>;
|
||
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
||
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active &mdss_disp_bkl_active>;
|
||
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend &mdss_disp_bkl_suspend>;
|
||
|
|
qcom,platform-te-gpio = <&tlmm 10 0>;
|
||
|
|
qcom,platform-reset-gpio = <&tlmm 8 0>;
|
||
|
|
qcom,platform-bklight-en-gpio = <&tlmm 135 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss_dsi1 {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&labibb {
|
||
|
|
status = "ok";
|
||
|
|
qpnp,qpnp-labibb-mode = "lcd";
|
||
|
|
};
|
||
|
|
|
||
|
|
&rpm_bus {
|
||
|
|
rpm-regulator-bstb {
|
||
|
|
status = "disabled";
|
||
|
|
regulator-bst {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rpm-regulator-ldoa22 {
|
||
|
|
pm8994_l22: regulator-l22 {
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
qcom,init-voltage = <3000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_charger {
|
||
|
|
/delete-property/ otg-parent-supply;
|
||
|
|
qcom,charging-disabled;
|
||
|
|
smbcharger_charger_otg {
|
||
|
|
parent-supply = <&pmi8994_boost_5v>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_fg {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_charger {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_otg_switch {
|
||
|
|
gpio = <&pm8994_gpios 11 0>;
|
||
|
|
enable-active-high;
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb3 {
|
||
|
|
qcom,charging-disabled;
|
||
|
|
vbus_dwc3-supply = <&usb_otg_switch>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb2s {
|
||
|
|
status = "ok";
|
||
|
|
pinctrl-0 = <&usb_hub_reset_active>;
|
||
|
|
pinctrl-1 = <&usb_hub_reset_suspend>;
|
||
|
|
qcom,ext-hub-reset-gpio = <&tlmm 103 0>;
|
||
|
|
qcom,disable-host-mode-pm;
|
||
|
|
dwc3@7600000 {
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_nop_phy {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&qusb_phy1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&rome_vreg {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_mpps {
|
||
|
|
mpp@a100 { /* MPP 2 */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
qcom,invert = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
mpp@a200 { /* MPP 3 */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
qcom,invert = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
mpp@a300 { /* MPP 4 */
|
||
|
|
/* HDMI_5v_vreg regulator enable */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
qcom,invert = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
mpp@a500 { /* MPP 6 */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
||
|
|
qcom,src-sel = <0>; /* Constant */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
qcom,invert = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
&pmi8994_gpios {
|
||
|
|
gpio@c100 { /* GPIO 2 SPKR_SD_N */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,pull = <5>; /* No Pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c200 { /* GPIO 3 SPKR_SD_N */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,pull = <5>; /* No Pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c300 { /* GPIO 4 USB2_ID */
|
||
|
|
qcom,mode = <0>; /* DIGITAL INPUT */
|
||
|
|
qcom,pull = <5>; /* No Pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c500 { /* GPIO 6 USB2_VBUS_DET*/
|
||
|
|
qcom,mode = <0>; /* DIGITAL INPUT */
|
||
|
|
qcom,pull = <5>; /* No Pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_mpps {
|
||
|
|
mpp@a300 { /* MPP 4 */
|
||
|
|
/* WLED FET */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,vin-sel = <0>; /* VIN0 */
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&soc {
|
||
|
|
qcom,cnss {
|
||
|
|
wlan-bootstrap-gpio = <&tlmm 46 0>;
|
||
|
|
wlan-en-gpio = <&pm8994_gpios 8 0>;
|
||
|
|
vdd-wlan-io-supply = <&pm8994_s4>;
|
||
|
|
// removing unneeded regulators
|
||
|
|
/delete-property/ vdd-wlan-supply;
|
||
|
|
/delete-property/ vdd-wlan-xtal-supply;
|
||
|
|
/delete-property/ vdd-wlan-core-supply;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@75ba000 {
|
||
|
|
synaptics@20 {
|
||
|
|
compatible = "synaptics,dsx";
|
||
|
|
reg = <0x20>;
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <125 0x2008>;
|
||
|
|
vdd-supply = <&pm8994_l14>;
|
||
|
|
avdd-supply = <&pm8994_l22>;
|
||
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
|
||
|
|
pinctrl-0 = <&ts_active>;
|
||
|
|
pinctrl-1 = <&ts_suspend>;
|
||
|
|
synaptics,display-coords = <0 0 480 854>;
|
||
|
|
synaptics,panel-coords = <0 0 480 854>;
|
||
|
|
synaptics,reset-gpio = <&tlmm 89 0x00>;
|
||
|
|
synaptics,irq-gpio = <&tlmm 125 0x2008>;
|
||
|
|
synaptics,button-map = <139 102 158>;
|
||
|
|
synaptics,disable-gpios;
|
||
|
|
/* Underlying clocks used by secure touch */
|
||
|
|
clock-names = "iface_clk", "core_clk";
|
||
|
|
clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,
|
||
|
|
<&clock_gcc clk_gcc_blsp2_qup6_i2c_apps_clk>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
input-name = "gpio-keys";
|
||
|
|
|
||
|
|
vol_up {
|
||
|
|
label = "volume_up";
|
||
|
|
gpios = <&pm8994_gpios 2 0x1>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <115>;
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
gp_switch_gpio {
|
||
|
|
label = "gp_switch_gpio";
|
||
|
|
pinctrl-0 = <&gp_switch_active>;
|
||
|
|
pinctrl-1 = <&gp_switch_suspend>;
|
||
|
|
gpios = <&tlmm 127 0x1>;
|
||
|
|
linux,input-type = <1>;
|
||
|
|
linux,code = <158>; /* By default mapped to BACK */
|
||
|
|
gpio-key,wakeup;
|
||
|
|
debounce-interval = <15>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* vph_pwr_vreg represents the unregulated battery voltage supply
|
||
|
|
* VPH_PWR that is present whenever the device is powered on.
|
||
|
|
*/
|
||
|
|
vph_pwr_vreg: vph_pwr_vreg {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vph_pwr";
|
||
|
|
status = "ok";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
sound {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
sound-9335 {
|
||
|
|
qcom,model = "msm8996-tasha-db-snd-card";
|
||
|
|
|
||
|
|
qcom,audio-routing =
|
||
|
|
"RX_BIAS", "MCLK",
|
||
|
|
"AMIC1", "MIC BIAS3",
|
||
|
|
"MIC BIAS3", "Analog Mic4",
|
||
|
|
"AMIC2", "MIC BIAS2",
|
||
|
|
"MIC BIAS2", "Headset Mic",
|
||
|
|
"AMIC3", "MIC BIAS2",
|
||
|
|
"MIC BIAS2", "ANCLeft Headset Mic",
|
||
|
|
"AMIC4", "MIC BIAS2",
|
||
|
|
"MIC BIAS2", "ANCRight Headset Mic",
|
||
|
|
"AMIC5", "MIC BIAS3",
|
||
|
|
"MIC BIAS3", "Analog Mic6",
|
||
|
|
"AMIC6", "MIC BIAS4",
|
||
|
|
"MIC BIAS4", "Analog Mic7",
|
||
|
|
"DMIC0", "MIC BIAS1",
|
||
|
|
"MIC BIAS1", "Digital Mic0",
|
||
|
|
"DMIC1", "MIC BIAS3",
|
||
|
|
"MIC BIAS3", "Digital Mic1",
|
||
|
|
"DMIC2", "MIC BIAS4",
|
||
|
|
"MIC BIAS4", "Digital Mic2",
|
||
|
|
"DMIC3", "MIC BIAS1",
|
||
|
|
"MIC BIAS1", "Digital Mic3",
|
||
|
|
"DMIC4", "MIC BIAS3",
|
||
|
|
"MIC BIAS3", "Digital Mic4",
|
||
|
|
"DMIC5", "MIC BIAS4",
|
||
|
|
"MIC BIAS4", "Digital Mic5";
|
||
|
|
|
||
|
|
qcom,hdmi-audio-rx;
|
||
|
|
asoc-codec = <&stub_codec>, <&hdmi_audio>;
|
||
|
|
asoc-codec-names = "msm-stub-codec.1",
|
||
|
|
"msm-hdmi-audio-codec-rx";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_detect {
|
||
|
|
compatible = "qcom,gpio-usbdetect";
|
||
|
|
interrupt-parent = <&spmi_bus>;
|
||
|
|
interrupts = <0x0 0xd5 0x0>; /* PM8994 GPIO22 */
|
||
|
|
interrupt-names = "vbus_det_irq";
|
||
|
|
vin-supply = <&vph_pwr_vreg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi@7575000 { /* BLSP1 QUP1 */
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&spmi_bus {
|
||
|
|
qcom,pm8994@1 {
|
||
|
|
pwm@b100 {
|
||
|
|
qcom,lpg-dtest-line = <4>;
|
||
|
|
qcom,dtest-output = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pm8994_gpios {
|
||
|
|
gpio@c100 { /* GPIO 2 - KYPD_VOLP_N */
|
||
|
|
qcom,mode = <0>;
|
||
|
|
qcom,pull = <0>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c300 { /* GPIO 4 - BL1_PWM */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,pull = <1>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,src-sel = <4>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c400 { /* GPIO 5 - BL0_PWM */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,pull = <1>; /* PULL DOWN */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <7>; /* LPG4 */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c600 { /* GPIO 7 */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c700 { /* GPIO 8 - WLAN_EN */
|
||
|
|
qcom,mode = <1>; /* Digital output*/
|
||
|
|
qcom,out-strength = <2>;/* QPNP_PIN_OUT_STRENGTH_MED */
|
||
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
||
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,invert = <0>; /* Invert */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@c900 { /* GPIO 10 */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@ca00 { /* GPIO 11 - USB enb1 (otg switch) */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,pull = <1>; /* PULL DOWN */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@cc00 { /* GPIO 13 */
|
||
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@ce00 { /* GPIO 15 - DIVCLK1 */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <1>;
|
||
|
|
qcom,src-sel = <2>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@cf00 { /* GPIO 16 - DIVCLK2 */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <1>;
|
||
|
|
qcom,src-sel = <2>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d000 { /* GPIO 17 - DIVCLK3 */
|
||
|
|
qcom,mode = <1>;
|
||
|
|
qcom,output-type = <0>;
|
||
|
|
qcom,pull = <5>;
|
||
|
|
qcom,vin-sel = <2>;
|
||
|
|
qcom,out-strength = <1>;
|
||
|
|
qcom,src-sel = <2>;
|
||
|
|
qcom,master-en = <1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d100 { /* GPIO 18 - Rome Sleep Clock */
|
||
|
|
qcom,mode = <1>; /* Digital output */
|
||
|
|
qcom,output-type = <0>; /* CMOS logic */
|
||
|
|
qcom,invert = <0>; /* Output low initially */
|
||
|
|
qcom,vin-sel = <2>; /* VIN 2 */
|
||
|
|
qcom,src-sel = <3>; /* Function 2 */
|
||
|
|
qcom,out-strength = <2>; /* Medium */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d200 { /* GPIO 19 - Rome BT Reset */
|
||
|
|
qcom,mode = <1>; /* Digital output*/
|
||
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
||
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
||
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,invert = <0>; /* Invert */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio@d500 { /* GPIO 22 - USB1 VBUS detect */
|
||
|
|
qcom,mode = <0>; /* Digital Input*/
|
||
|
|
qcom,pull = <5>; /* No pull */
|
||
|
|
qcom,vin-sel = <2>; /* 1.8 V */
|
||
|
|
qcom,src-sel = <0>; /* GPIO */
|
||
|
|
qcom,invert = <0>; /* Invert */
|
||
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pmi8994_haptics {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&blsp1_uart2 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
&slim_msm {
|
||
|
|
tasha_codec {
|
||
|
|
qcom,cdc-micbias2-headset-only;
|
||
|
|
qcom,cdc-micbias1-ext-cap;
|
||
|
|
qcom,cdc-micbias2-ext-cap;
|
||
|
|
qcom,cdc-micbias3-ext-cap;
|
||
|
|
qcom,cdc-micbias4-ext-cap;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk0_active { /* MCLK0 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk0_suspend { /* MCLK0 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk1_active { /* MCLK1 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk1_suspend { /* MCLK1 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk2_active { /* MCLK2 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cam_sensor_mclk2_suspend { /* MCLK2 */
|
||
|
|
config {
|
||
|
|
drive-strength = <8>; /* 8 MA */
|
||
|
|
};
|
||
|
|
};
|