# # Multimedia device configuration # menuconfig MEDIA_SUPPORT tristate "Multimedia support" depends on HAS_IOMEM help If you want to use Webcams, Video grabber devices and/or TV devices enable this option and other options below. Additional info and docs are available on the web at if MEDIA_SUPPORT comment "Multimedia core support" # # Multimedia support - automatically enable V4L2 and DVB core # config MEDIA_CAMERA_SUPPORT bool "Cameras/video grabbers support" ---help--- Enable support for webcams and video grabbers. Say Y when you have a webcam or a video capture grabber board. config MEDIA_ANALOG_TV_SUPPORT bool "Analog TV support" ---help--- Enable analog TV support. Say Y when you have a TV board with analog support or with a hybrid analog/digital TV chipset. Note: There are several DVB cards that are based on chips that support both analog and digital TV. Disabling this option will disable support for them. config MEDIA_DIGITAL_TV_SUPPORT bool "Digital TV support" ---help--- Enable digital TV support. Say Y when you have a board with digital support or a board with hybrid digital TV and analog TV. config MEDIA_RADIO_SUPPORT bool "AM/FM radio receivers/transmitters support" ---help--- Enable AM/FM radio support. Additional info and docs are available on the web at Say Y when you have a board with radio support. Note: There are several TV cards that are based on chips that support radio reception. Disabling this option will disable support for them. config MEDIA_SDR_SUPPORT bool "Software defined radio support" ---help--- Enable software defined radio support. Say Y when you have a software defined radio device. config MEDIA_RC_SUPPORT bool "Remote Controller support" depends on INPUT ---help--- Enable support for Remote Controllers on Linux. This is needed in order to support several video capture adapters, standalone IR receivers/transmitters, and RF receivers. Enable this option if you have a video capture board even if you don't need IR, as otherwise, you may not be able to compile the driver for your adapter. Say Y when you have a TV or an IR device. # # Media controller # Selectable only for webcam/grabbers, as other drivers don't use it # config MEDIA_CONTROLLER bool "Media Controller API" depends on MEDIA_CAMERA_SUPPORT ---help--- Enable the media controller API used to query media devices internal topology and configure it dynamically. This API is mostly used by camera interfaces in embedded platforms. # # Video4Linux support # Only enables if one of the V4L2 types (ATV, webcam, radio) is selected # config VIDEO_DEV tristate depends on MEDIA_SUPPORT depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT default y config VIDEO_V4L2_SUBDEV_API bool "V4L2 sub-device userspace API" depends on VIDEO_DEV && MEDIA_CONTROLLER ---help--- Enables the V4L2 sub-device pad-level userspace API used to configure video format, size and frame rate between hardware blocks. This API is mostly used by camera interfaces in embedded platforms. source "drivers/media/v4l2-core/Kconfig" # # DVB Core # Only enables if one of DTV is selected # config DVB_CORE tristate depends on MEDIA_SUPPORT depends on MEDIA_DIGITAL_TV_SUPPORT default y select CRC32 config DVB_NET bool "DVB Network Support" default (NET && INET) depends on NET && INET && DVB_CORE help This option enables DVB Network Support which is a part of the DVB standard. It is used, for example, by automatic firmware updates used on Set-Top-Boxes. It can also be used to access the Internet via the DVB card, if the network provider supports it. You may want to disable the network support on embedded devices. If unsure say Y. # This Kconfig option is used by both PCI and USB drivers config TTPCI_EEPROM tristate depends on I2C default n source "drivers/media/dvb-core/Kconfig" comment "Media drivers" source "drivers/media/rc/Kconfig" # # V4L platform/mem2mem drivers # source "drivers/media/usb/Kconfig" source "drivers/media/pci/Kconfig" source "drivers/media/platform/Kconfig" source "drivers/media/mmc/Kconfig" source "drivers/media/parport/Kconfig" source "drivers/media/radio/Kconfig" comment "Supported FireWire (IEEE 1394) Adapters" depends on DVB_CORE && FIREWIRE source "drivers/media/firewire/Kconfig" # Common driver options source "drivers/media/common/Kconfig" comment "Media ancillary drivers (tuners, sensors, i2c, frontends)" # # Ancillary drivers (tuners, i2c, frontends) # config MEDIA_SUBDRV_AUTOSELECT bool "Autoselect ancillary drivers (tuners, sensors, i2c, frontends)" depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT depends on HAS_IOMEM select I2C select I2C_MUX default y help By default, a media driver auto-selects all possible ancillary devices such as tuners, sensors, video encoders/decoders and frontends, that are used by any of the supported devices. This is generally the right thing to do, except when there are strict constraints with regards to the kernel size, like on embedded systems. Use this option with care, as deselecting ancillary drivers which are, in fact, necessary will result in the lack of the needed functionality for your device (it may not tune or may not have the needed demodulators). If unsure say Y. config MEDIA_ATTACH bool depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT depends on MODULES default MODULES source "drivers/media/i2c/Kconfig" source "drivers/media/tuners/Kconfig" source "drivers/media/dvb-frontends/Kconfig" source "drivers/media/isdbt/Kconfig" endif # MEDIA_SUPPORT