/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&spmi_bus {
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <3>;

	qcom,pmi8994@2 {
		spmi-slave-container;
		reg = <0x2>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmi8994_revid: qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800 0x100>;
			qcom,secondary-pon-reset;
			pon_perph_reg: qcom,pon_perph_reg {
				regulator-name = "pon_spare_reg";
				qcom,pon-spare-reg-addr = <0x8c>;
				qcom,pon-spare-reg-bit = <1>;
			};
		};

		pmi8994_gpios: gpios {
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";
			gpio-controller;
			#gpio-cells = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			label = "pmi8994-gpio";

			gpio@c000 {
				reg = <0xc000 0x100>;
				qcom,pin-num = <1>;
				status = "disabled";
			};

			gpio@c100 {
				reg = <0xc100 0x100>;
				qcom,pin-num = <2>;
				status = "disabled";
			};

			gpio@c200 {
				reg = <0xc200 0x100>;
				qcom,pin-num = <3>;
				status = "disabled";
			};

			gpio@c300 {
				reg = <0xc300 0x100>;
				qcom,pin-num = <4>;
				status = "disabled";
			};

			gpio@c400 {
				reg = <0xc400 0x100>;
				qcom,pin-num = <5>;
				status = "disabled";
			};

			gpio@c500 {
				reg = <0xc500 0x100>;
				qcom,pin-num = <6>;
				status = "disabled";
			};

			gpio@c600 {
				reg = <0xc600 0x100>;
				qcom,pin-num = <7>;
				status = "disabled";
			};

			gpio@c700 {
				reg = <0xc700 0x100>;
				qcom,pin-num = <8>;
				status = "disabled";
			};

			gpio@c800 {
				reg = <0xc800 0x100>;
				qcom,pin-num = <9>;
				status = "disabled";
			};

			gpio@c900 {
				reg = <0xc900 0x100>;
				qcom,pin-num = <10>;
				status = "disabled";
			};
		};

		pmi8994_mpps: mpps {
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";
			gpio-controller;
			#gpio-cells = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			label = "pmi8994-mpp";

			mpp@a000 {
				reg = <0xa000 0x100>;
				qcom,pin-num = <1>;
				status = "disabled";
			};

			mpp@a100 {
				reg = <0xa100 0x100>;
				qcom,pin-num = <2>;
				status = "disabled";
			};

			mpp@a200 {
				reg = <0xa200 0x100>;
				qcom,pin-num = <3>;
				status = "disabled";
			};

			mpp@a300 {
				reg = <0xa300 0x100>;
				qcom,pin-num = <4>;
				status = "disabled";
			};
		};

		bcl@4200 {
			compatible = "qcom,msm-bcl";
			reg = <0x4200 0xFF 0x88E 0x2>;
			reg-names = "fg_user_adc", "pon_spare";
			interrupts = <0x2 0x42 0x0>,
					<0x2 0x42 0x1>;
			interrupt-names = "bcl-high-ibat-int",
					"bcl-low-vbat-int";
			qcom,vbat-scaling-factor = <39000>;
			qcom,vbat-gain-numerator = <1>;
			qcom,vbat-gain-denominator = <128>;
			qcom,vbat-polling-delay-ms = <100>;
			qcom,ibat-scaling-factor = <39000>;
			qcom,ibat-gain-numerator = <1>;
			qcom,ibat-gain-denominator = <128>;
			qcom,ibat-offset-numerator = <1200>;
			qcom,ibat-offset-denominator = <1>;
			qcom,ibat-polling-delay-ms = <100>;
			qcom,inhibit-derating-ua = <550000>;
		};

		pmi8994_vadc: vadc@3100 {
			compatible = "qcom,qpnp-vadc";
			reg = <0x3100 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x2 0x31 0x0>,
					<0x2 0x31 0x3>,
				     <0x2 0x31 0x4>;
			interrupt-names =	"eoc-int-en-set",
						"high-thr-en-set",
						"low-thr-en-set";
			qcom,adc-bit-resolution = <15>;
			qcom,adc-vdd-reference = <1800>;
			qcom,vadc-poll-eoc;
			qcom,vadc-meas-int-mode;
			qcom,pmic-revid = <&pmi8994_revid>;

			chan@d {
				label = "chg_temp";
				reg = <0xd>;
				qcom,decimation = <0>;
				qcom,pre-div-channel-scaling = <0>;
				qcom,calibration-type = "absolute";
				qcom,scale-function = <16>;
				qcom,hw-settle-time = <0>;
				qcom,fast-avg-setup = <0>;
			};
		};

		pmi8994_charger: qcom,qpnp-smbcharger {
			spmi-dev-container;
			compatible = "qcom,qpnp-smbcharger";
			#address-cells = <1>;
			#size-cells = <1>;

			qcom,iterm-ma = <100>;
			qcom,fastchg-current-ma = <2000>;
			qcom,float-voltage-mv = <4350>;
			qcom,resume-delta-mv = <200>;
			qcom,chg-inhibit-fg;
			qcom,dc-psy-type = "Mains";
			qcom,dc-psy-ma = <1500>;
			qcom,rparasitic-uohm = <100000>;
			qcom,bms-psy-name = "bms";
			qcom,thermal-mitigation = <1500 700 600 0>;
			qcom,parallel-usb-min-current-ma = <1400>;
			qcom,parallel-usb-9v-min-current-ma = <900>;
			qcom,parallel-allowed-lowering-ma = <500>;
			qcom,autoadjust-vfloat;
			qcom,pmic-revid = <&pmi8994_revid>;
			qcom,force-aicl-rerun;
			qcom,aicl-rerun-period-s = <180>;

			qcom,chgr@1000 {
				reg = <0x1000 0x100>;
				interrupts =	<0x2 0x10 0x0>,
						<0x2 0x10 0x1>,
						<0x2 0x10 0x2>,
						<0x2 0x10 0x3>,
						<0x2 0x10 0x4>,
						<0x2 0x10 0x5>,
						<0x2 0x10 0x6>,
						<0x2 0x10 0x7>;

				interrupt-names =	"chg-error",
							"chg-inhibit",
							"chg-prechg-sft",
							"chg-complete-chg-sft",
							"chg-p2f-thr",
							"chg-rechg-thr",
							"chg-taper-thr",
							"chg-tcc-thr";
			};

			qcom,otg@1100 {
				reg = <0x1100 0x100>;
			};

			qcom,bat-if@1200 {
				reg = <0x1200 0x100>;
				interrupts =	<0x2 0x12 0x0>,
						<0x2 0x12 0x1>,
						<0x2 0x12 0x2>,
						<0x2 0x12 0x3>,
						<0x2 0x12 0x4>,
						<0x2 0x12 0x5>,
						<0x2 0x12 0x6>,
						<0x2 0x12 0x7>;

				interrupt-names =	"batt-hot",
							"batt-warm",
							"batt-cold",
							"batt-cool",
							"batt-ov",
							"batt-low",
							"batt-missing",
							"batt-term-missing";
			};

			qcom,usb-chgpth@1300 {
				reg = <0x1300 0x100>;
				interrupts =	<0x2 0x13 0x0>,
						<0x2 0x13 0x1>,
						<0x2 0x13 0x2>,
						<0x2 0x13 0x3>,
						<0x2 0x13 0x4>,
						<0x2 0x13 0x5>,
						<0x2 0x13 0x6>;

				interrupt-names =	"usbin-uv",
							"usbin-ov",
							"usbin-src-det",
							"otg-fail",
							"otg-oc",
							"aicl-done",
							"usbid-change";
			};

			qcom,dc-chgpth@1400 {
				reg = <0x1400 0x100>;
				interrupts =	<0x2 0x14 0x0>,
						<0x2 0x14 0x1>;

				interrupt-names =	"dcin-uv",
							"dcin-ov";
			};

			qcom,chgr-misc@1600 {
				reg = <0x1600 0x100>;
				interrupts =	<0x2 0x16 0x0>,
						<0x2 0x16 0x1>,
						<0x2 0x16 0x2>,
						<0x2 0x16 0x3>,
						<0x2 0x16 0x4>,
						<0x2 0x16 0x5>;

				interrupt-names =	"power-ok",
							"temp-shutdown",
							"wdog-timeout",
							"flash-fail",
							"otst2",
							"otst3";
			};
		};

		pmi8994_fg: qcom,fg {
			spmi-dev-container;
			compatible = "qcom,qpnp-fg";
			#address-cells = <1>;
			#size-cells = <1>;
			qcom,resume-soc = <95>;
			status = "okay";
			qcom,bcl-lm-threshold-ma = <127>;
			qcom,bcl-mh-threshold-ma = <405>;
			qcom,fg-iterm-ma = <125>;
			qcom,fg-chg-iterm-ma = <100>;
			qcom,cycle-counter-en;
			qcom,capacity-learning-on;
			qcom,fg-cc-cv-threshold-mv = <4340>;
			qcom,pmic-revid = <&pmi8994_revid>;

			qcom,fg-soc@4000 {
				status = "okay";
				reg = <0x4000 0x100>;
				interrupts =	<0x2 0x40 0x0>,
						<0x2 0x40 0x1>,
						<0x2 0x40 0x2>,
						<0x2 0x40 0x3>,
						<0x2 0x40 0x4>,
						<0x2 0x40 0x5>,
						<0x2 0x40 0x6>,
						<0x2 0x40 0x7>;

				interrupt-names =	"high-soc",
							"low-soc",
							"full-soc",
							"empty-soc",
							"delta-soc",
							"first-est-done",
							"sw-fallbk-ocv",
							"sw-fallbk-new-battrt-sts",
							"fg-soc-irq-count";
			};

			qcom,fg-batt@4100 {
				reg = <0x4100 0x100>;
				interrupts =	<0x2 0x41 0x0>,
						<0x2 0x41 0x1>,
						<0x2 0x41 0x2>,
						<0x2 0x41 0x3>,
						<0x2 0x41 0x4>,
						<0x2 0x41 0x5>,
						<0x2 0x41 0x6>,
						<0x2 0x41 0x7>;

				interrupt-names =	"soft-cold",
							"soft-hot",
							"vbatt-low",
							"batt-ided",
							"batt-id-req",
							"batt-unknown",
							"batt-missing",
							"batt-match";
			};

			qcom,fg-adc-vbat@4254 {
				reg = <0x4254 0x1>;
			};

			qcom,fg-adc-ibat@4255 {
				reg = <0x4255 0x1>;
			};

			qcom,revid-tp-rev@1f1 {
				reg = <0x1f1 0x1>;
			};

			qcom,fg-memif@4400 {
				status = "okay";
				reg = <0x4400 0x100>;
				interrupts =	<0x2 0x44 0x0>,
						<0x2 0x44 0x1>;

				interrupt-names =	"mem-avail",
							"data-rcvry-sug";
			};
		};
	};

	qcom,pmi8994@3 {
		spmi-slave-container;
		reg = <0x3>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmi8994_pwm_1: pwm@b100 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb100 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <0>;
			qcom,supported-sizes = <6>, <9>;
			qcom,ramp-index = <0>;
			#pwm-cells = <2>;
		};

		pmi8994_pwm_2: pwm@b200 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb200 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <1>;
			qcom,supported-sizes = <6>, <9>;
			qcom,ramp-index = <1>;
			#pwm-cells = <2>;
		};

		pmi8994_pwm_3: pwm@b300 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb300 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <2>;
			qcom,supported-sizes = <6>, <9>;
			qcom,ramp-index = <2>;
			#pwm-cells = <2>;
		};

		pmi8994_pwm_4: pwm@b400 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb400 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <3>;
			qcom,supported-sizes = <6>, <9>;
			qcom,ramp-index = <3>;
			#pwm-cells = <2>;
		};

		labibb: qpnp-labibb-regulator {
			status = "disabled";
			spmi-dev-container;
			compatible = "qcom,qpnp-labibb-regulator";
			#address-cells = <1>;
			#size-cells = <1>;

			ibb_regulator: qcom,ibb@dc00 {
				reg = <0xdc00 0x100>;
				reg-names = "ibb_reg";
				regulator-name = "ibb_reg";

				regulator-min-microvolt = <4600000>;
				regulator-max-microvolt = <6000000>;

				qcom,qpnp-ibb-min-voltage = <1400000>;
				qcom,qpnp-ibb-step-size = <100000>;
				qcom,qpnp-ibb-slew-rate = <2000000>;
				qcom,qpnp-ibb-use-default-voltage;
				qcom,qpnp-ibb-init-voltage = <5500000>;
				qcom,qpnp-ibb-init-amoled-voltage = <4000000>;
				qcom,qpnp-ibb-init-lcd-voltage = <5500000>;

				qcom,qpnp-ibb-soft-start = <1000>;

				qcom,qpnp-ibb-discharge-resistor = <32>;
				qcom,qpnp-ibb-lab-pwrup-delay = <8000>;
				qcom,qpnp-ibb-lab-pwrdn-delay = <8000>;
				qcom,qpnp-ibb-en-discharge;

				qcom,qpnp-ibb-full-pull-down;
				qcom,qpnp-ibb-pull-down-enable;
				qcom,qpnp-ibb-switching-clock-frequency = <1480>;
				qcom,qpnp-ibb-limit-maximum-current = <1550>;
				qcom,qpnp-ibb-debounce-cycle = <16>;
				qcom,qpnp-ibb-limit-max-current-enable;
				qcom,qpnp-ibb-ps-enable;
			};

			lab_regulator: qcom,lab@de00 {
				reg = <0xde00 0x100>;
				reg-names = "lab";
				regulator-name = "lab_reg";

				regulator-min-microvolt = <4600000>;
				regulator-max-microvolt = <6000000>;

				qcom,qpnp-lab-min-voltage = <4600000>;
				qcom,qpnp-lab-step-size = <100000>;
				qcom,qpnp-lab-slew-rate = <5000>;
				qcom,qpnp-lab-use-default-voltage;
				qcom,qpnp-lab-init-voltage = <5500000>;
				qcom,qpnp-lab-init-amoled-voltage = <4600000>;
				qcom,qpnp-lab-init-lcd-voltage = <5500000>;

				qcom,qpnp-lab-soft-start = <800>;

				qcom,qpnp-lab-full-pull-down;
				qcom,qpnp-lab-pull-down-enable;
				qcom,qpnp-lab-switching-clock-frequency =
									<1600>;
				qcom,qpnp-lab-limit-maximum-current = <800>;
				qcom,qpnp-lab-limit-max-current-enable;
				qcom,qpnp-lab-ps-threshold = <20>;
				qcom,qpnp-lab-ps-enable;
				qcom,qpnp-lab-nfet-size = <100>;
				qcom,qpnp-lab-pfet-size = <100>;
				qcom,qpnp-lab-max-precharge-time = <300>;
			};
		};

		pmi8994_wled: qcom,leds@d800 {
			compatible = "qcom,qpnp-wled";
			reg = <0xd800 0x100>,
				<0xd900 0x100>,
				<0xdc00 0x100>,
				<0xde00 0x100>;
			reg-names = "qpnp-wled-ctrl-base",
					"qpnp-wled-sink-base",
					"qpnp-wled-ibb-base",
					"qpnp-wled-lab-base";
			interrupts = <0x3 0xd8 0x2>;
			interrupt-names = "sc-irq";
			status = "okay";
			linux,name = "wled";
			linux,default-trigger = "bkl-trigger";
			qcom,fdbk-output = "auto";
			qcom,vref-mv = <350>;
			qcom,switch-freq-khz = <800>;
			qcom,ovp-mv = <29500>;
			qcom,ilim-ma = <980>;
			qcom,boost-duty-ns = <26>;
			qcom,mod-freq-khz = <9600>;
			qcom,dim-mode = "hybrid";
			qcom,hyb-thres = <625>;
			qcom,sync-dly-us = <800>;
			qcom,fs-curr-ua = <25000>;
			qcom,cons-sync-write-delay-us = <1000>;
			qcom,en-phase-stag;
			qcom,led-strings-list = [00 01 02 03];
			qcom,en-ext-pfet-sc-pro;
		};

		pmi8994_haptics: qcom,haptic@c000 {
			status = "disabled";
			compatible = "qcom,qpnp-haptic";
			reg = <0xc000 0x100>;
			interrupts = <0x3 0xc0 0x0>,
				     <0x3 0xc0 0x1>;
			interrupt-names = "sc-irq", "play-irq";
			vcc_pon-supply = <&pon_perph_reg>;
			qcom,play-mode = "direct";
			qcom,wave-play-rate-us = <5263>;
			qcom,actuator-type = "lra";
			qcom,wave-shape = "square";
			qcom,vmax-mv = <2000>;
			qcom,ilim-ma = <800>;
			qcom,sc-deb-cycles = <8>;
			qcom,int-pwm-freq-khz = <505>;
			qcom,en-brake;
			qcom,brake-pattern = [03 03 00 00];
			qcom,use-play-irq;
			qcom,use-sc-irq;
			qcom,wave-samples = [3e 3e 3e 3e 3e 3e 3e 3e];
			qcom,wave-rep-cnt = <1>;
			qcom,wave-samp-rep-cnt = <1>;
			qcom,lra-high-z = "opt1";
			qcom,lra-auto-res-mode = "qwd";
			qcom,lra-res-cal-period = <4>;
		};

		qcom,leds@d000 {
			compatible = "qcom,leds-qpnp";
			reg = <0xd000 0x100>;
			label = "rgb";
			status = "okay";

			red_led: qcom,rgb_0 {
				label = "rgb";
				qcom,id = <3>;
				qcom,mode = "pwm";
				pwms = <&pmi8994_pwm_3 0 0>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "red";
				linux,default-trigger =
					"battery-charging";
			};

			green_led: qcom,rgb_1 {
				label = "rgb";
				qcom,id = <4>;
				qcom,mode = "pwm";
				pwms = <&pmi8994_pwm_2 0 0>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "green";
				linux,default-trigger = "battery-full";
			};

			blue_led: qcom,rgb_2 {
				label = "rgb";
				qcom,id = <5>;
				qcom,mode = "pwm";
				pwms = <&pmi8994_pwm_1 0 0>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "blue";
				linux,default-trigger = "boot-indication";
			};
		};

		flash_led: qcom,leds@d300 {
			compatible = "qcom,qpnp-flash-led";
			status = "okay";
			reg = <0xd300 0x100>;
			label = "flash";
			qcom,headroom = <500>;
			qcom,startup-dly = <128>;
			qcom,clamp-curr = <200>;
			qcom,pmic-charger-support;
			qcom,self-check-enabled;
			qcom,thermal-derate-enabled;
			qcom,thermal-derate-threshold = <105>;
			qcom,thermal-derate-rate = "5_PERCENT";
			qcom,current-ramp-enabled;
			qcom,ramp_up_step = "6P7_US";
			qcom,ramp_dn_step = "6P7_US";
			qcom,vph-pwr-droop-enabled;
			qcom,vph-pwr-droop-threshold = <3000>;
			qcom,vph-pwr-droop-debounce-time = <10>;
			qcom,headroom-sense-ch0-enabled;
			qcom,headroom-sense-ch1-enabled;
			qcom,power-detect-enabled;

			pmi8994_flash0: qcom,flash_0 {
				label = "flash";
				qcom,led-name = "led:flash_0";
				qcom,default-led-trigger =
						"flash0_trigger";
				qcom,id = <0>;
				qcom,duration = <1280>;
				qcom,current = <625>;
				qcom,max-current = <1000>;
			};

			pmi8994_flash1: qcom,flash_1 {
				label = "flash";
				qcom,led-name = "led:flash_1";
				qcom,default-led-trigger =
						"flash1_trigger";
				qcom,id = <1>;
				qcom,duration = <1280>;
				qcom,current = <625>;
				qcom,max-current = <1000>;
			};

			pmi8994_torch0: qcom,torch_0 {
				label = "torch";
				qcom,led-name = "led:torch_0";
				qcom,default-led-trigger =
						"torch0_trigger";
				qcom,id = <0>;
				qcom,current = <120>;
				qcom,max-current = <200>;
			};

			pmi8994_torch1: qcom,torch_1 {
				label = "torch";
				qcom,led-name = "led:torch_1";
				qcom,default-led-trigger =
						"torch1_trigger";
				qcom,id = <1>;
				qcom,current = <120>;
				qcom,max-current = <200>;
			};

			pmi8994_switch: qcom,switch {
				label = "switch";
				qcom,led-name = "led:switch";
				qcom,default-led-trigger =
						"switch_trigger";
				qcom,id = <2>;
				qcom,current = <625>;
				qcom,max-current = <1000>;
				qcom,duration = <1280>;
				reg0 {
					regulator-name =
						"pmi8994_boostbypass";
					max-voltage = <3600000>;
				};
				reg1 {
					regulator-name = "pon_spare_reg";
				};
			};
		};
	};
};