/* * Copyright (c) 2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "msm8952-qrd.dtsi" &spmi_bus { qcom,pmi8950@2 { qcom,leds@a100 { status = "okay"; qcom,led_mpp_2 { label = "mpp"; linux,name = "green"; linux,default-trigger = "none"; qcom,default-state = "off"; qcom,max-current = <40>; qcom,current-setting = <5>; qcom,id = <6>; qcom,mode = "manual"; qcom,source-sel = <1>; qcom,mode-ctrl = <0x60>; }; }; }; }; &i2c_3 { /* BLSP1 QUP3 */ synaptics@20 { compatible = "synaptics,rmi4"; reg = <0x20>; interrupt-parent = <&msm_gpio>; interrupts = <65 0x2008>; vdd-supply = <&pm8950_l17>; vcc_i2c-supply = <&pm8950_l6>; /* pins used by touchscreen */ pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; pinctrl-2 = <&ts_release>; synaptics,display-coords = <0 0 1079 1919>; synaptics,panel-coords = <0 0 1079 2084>; synaptics,irq-gpio = <&msm_gpio 65 0x2008>; synaptics,reset-gpio = <&msm_gpio 64 0x0>; synaptics,i2c-pull-up; synaptics,power-down; synaptics,disable-gpios; synaptics,bypass-packrat-id-check; synaptics,button-map = <139 172 158>; }; }; &soc { gpio_keys { compatible = "gpio-keys"; input-name = "gpio-keys"; pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend"; pinctrl-0 = <&gpio_key_active>; pinctrl-1 = <&gpio_key_suspend>; vol_up { label = "volume_up"; gpios = <&msm_gpio 85 0x1>; linux,input-type = <1>; linux,code = <115>; gpio-key,wakeup; debounce-interval = <15>; }; home { label = "home"; gpios = <&msm_gpio 93 0x1>; linux,input-type = <1>; linux,code = <102>; gpio-key,wakeup; debounce-interval = <15>; }; }; sound { compatible = "qcom,msm8952-audio-codec"; qcom,model = "msm8952-skum-snd-card"; reg = <0xc051000 0x4>, <0xc051004 0x4>, <0xc055000 0x4>; reg-names = "csr_gp_io_mux_mic_ctl", "csr_gp_io_mux_spkr_ctl", "csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel"; qcom,msm-ext-pa = "primary"; qcom,msm-mclk-freq = <9600000>; qcom,msm-mbhc-hphl-swh = <1>; qcom,msm-mbhc-gnd-swh = <0>; qcom,msm-hs-micbias-type = "internal"; qcom,msm-micbias1-ext-cap; qcom,msm-micbias2-ext-cap; qcom,audio-routing = "RX_BIAS", "MCLK", "SPK_RX_BIAS", "MCLK", "INT_LDO_H", "MCLK", "MIC BIAS External", "Handset Mic", "MIC BIAS Internal2", "Headset Mic", "MIC BIAS External", "Secondary Mic", "AMIC1", "MIC BIAS External", "AMIC2", "MIC BIAS Internal2", "AMIC3", "MIC BIAS External", "SpkrMono WSA_IN", "WSA_SPK OUT"; qcom,msm-gpios = "pri_i2s"; qcom,pinctrl-names = "all_off", "pri_i2s_act"; pinctrl-names = "all_off", "pri_i2s_act"; pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus>; pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act>; asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>, <&loopback>, <&compress>, <&hostless>, <&afe>, <&lsm>, <&routing>, <&lpa>, <&voice_svc>; asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1", "msm-pcm-dsp.2", "msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback", "msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe", "msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa", "msm-voice-svc"; asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>, <&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>, <&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>, <&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>, <&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>, <&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>, <&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>, <&incall_music_2_rx>; asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8", "msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1", "msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3", "msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385", "msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387", "msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391", "msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393", "msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289", "msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293", "msm-dai-q6-dev.224", "msm-dai-q6-dev.225", "msm-dai-q6-dev.241", "msm-dai-q6-dev.240", "msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770"; asoc-codec = <&stub_codec>, <&pm8950_cajon_dig>; asoc-codec-names = "msm-stub-codec.1", "cajon_codec"; }; }; &msm_gpio { tlmm_gpio_key { gpio_key_active: gpio_key_active { mux { pins = "gpio85", "gpio93"; function = "gpio"; }; config { pins = "gpio85", "gpios93"; }; }; gpio_key_suspend: gpio_key_suspend { mux { pins = "gpio85", "gpio93"; function = "gpio"; }; config { pins = "gpio85", "gpios93"; }; }; }; }; &pmi8950_haptic { qcom,vmax-mv = <3300>; }; &labibb { status = "ok"; qpnp,qpnp-labibb-mode = "lcd"; }; &pmi8950_charger { qcom,float-voltage-mv = <4400>; qcom,chg-led-sw-controls; qcom,chg-led-support; status = "okay"; }; / { qrd_batterydata: qcom,battery-data { qcom,batt-id-range-pct = <15>; #include "batterydata-qrd-skum-4v4-2920mah.dtsi" }; }; &pmi8950_fg { qcom,battery-data = <&qrd_batterydata>; }; &mdss_mdp { qcom,mdss-pref-prim-intf = "dsi"; }; &msm_gpio { pmx_mdss { mdss_dsi_active: mdss_dsi_active { mux { pins = "gpio0"; }; config { pins = "gpio0"; }; }; mdss_dsi_suspend: mdss_dsi_suspend { mux { pins = "gpio0"; }; config { pins = "gpio0"; }; }; }; pmx_mdss_te { mdss_te_active: mdss_te_active { mux { qcom,pins = "gpio24"; }; config { qcom,pins = "gpio24"; }; }; mdss_te_suspend: mdss_te_suspend { mux { qcom,pins = "gpio24"; }; config { qcom,pins = "gpio24"; }; }; }; }; &mdss_dsi0 { pinctrl-names = "mdss_default", "mdss_sleep"; pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; qcom,dsi-pref-prim-pan = <&dsi_otm1906c_1080p_cmd>; qcom,dsi-panel-bias-vreg; qcom,platform-reset-gpio = <&msm_gpio 0 0>; }; &sdc2_cd_on { /delete-property/ bias-pull-up; bias-disable; }; &dsi_otm1906c_1080p_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; };