/* * OMAP4+ Power Management Routines * * Copyright (C) 2010-2013 Texas Instruments, Inc. * Rajendra Nayak * Santosh Shilimkar * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" #include "pm.h" u16 pm44xx_errata; struct power_state { struct powerdomain *pwrdm; u32 next_state; u32 next_logic_state; #ifdef CONFIG_SUSPEND u32 saved_state; u32 saved_logic_state; #endif struct list_head node; }; static u32 cpu_suspend_state = PWRDM_POWER_OFF; static LIST_HEAD(pwrst_list); #ifdef CONFIG_SUSPEND static int omap4_pm_suspend(void) { struct power_state *pwrst; int state, ret = 0; u32 cpu_id = smp_processor_id(); /* Save current powerdomain state */ list_for_each_entry(pwrst, &pwrst_list, node) { pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm); } /* Set targeted power domain states by suspend */ list_for_each_entry(pwrst, &pwrst_list, node) { omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state); } /* * For MPUSS to hit power domain retention(CSWR or OSWR), * CPU0 and CPU1 power domains need to be in OFF or DORMANT state, * since CPU power domain CSWR is not supported by hardware * Only master CPU follows suspend path. All other CPUs follow * CPU hotplug path in system wide suspend. On OMAP4, CPU power * domain CSWR is not supported by hardware. * More details can be found in OMAP4430 TRM section 4.3.4.2. */ omap4_enter_lowpower(cpu_id, cpu_suspend_state); /* Restore next powerdomain state */ list_for_each_entry(pwrst, &pwrst_list, node) { state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { pr_info("Powerdomain (%s) didn't enter target state %d\n", pwrst->pwrdm->name, pwrst->next_state); ret = -1; } omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state); } if (ret) { pr_crit("Could not enter target state in pm_suspend\n"); /* * OMAP4 chip PM currently works only with certain (newer) * versions of bootloaders. This is due to missing code in the * kernel to properly reset and initialize some devices. * Warn the user about the bootloader version being one of the * possible causes. * http://www.spinics.net/lists/arm-kernel/msg218641.html */ pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n"); } else { pr_info("Successfully put all powerdomains to target state\n"); } return 0; } #else #define omap4_pm_suspend NULL #endif /* CONFIG_SUSPEND */ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) { struct power_state *pwrst; if (!pwrdm->pwrsts) return 0; /* * Skip CPU0 and CPU1 power domains. CPU1 is programmed * through hotplug path and CPU0 explicitly programmed * further down in the code path */ if (!strncmp(pwrdm->name, "cpu", 3)) { if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) cpu_suspend_state = PWRDM_POWER_RET; return 0; } pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) return -ENOMEM; pwrst->pwrdm = pwrdm; pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false, PWRDM_POWER_RET); pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true, PWRDM_POWER_OFF); list_add(&pwrst->node, &pwrst_list); return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); } /** * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and * by secondary CPU with CONFIG_CPU_IDLE. */ static void omap_default_idle(void) { omap_do_wfi(); } /** * omap4_init_static_deps - Add OMAP4 static dependencies * * Add needed static clockdomain dependencies on OMAP4 devices. * Return: 0 on success or 'err' on failures */ static inline int omap4_init_static_deps(void) { struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; struct clockdomain *ducati_clkdm, *l3_2_clkdm; int ret = 0; /* * The dynamic dependency between MPUSS -> MEMIF and * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. * The L4 wakeup depedency is added to workaround the OCP sync hardware * BUG with 32K synctimer which lead to incorrect timer value read * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l3_2_clkdm) || (!ducati_clkdm)) return -EINVAL; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); return -EINVAL; } return ret; } /** * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and * DRA7 * * The dynamic dependency between MPUSS -> EMIF is broken and has * not worked as expected. The hardware recommendation is to * enable static dependencies for these to avoid system * lock ups or random crashes. */ static inline int omap5_dra7_init_static_deps(void) { struct clockdomain *mpuss_clkdm, *emif_clkdm; int ret; mpuss_clkdm = clkdm_lookup("mpu_clkdm"); emif_clkdm = clkdm_lookup("emif_clkdm"); if (!mpuss_clkdm || !emif_clkdm) return -EINVAL; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); if (ret) pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n"); return ret; } /** * omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices * * Initializes basic stuff for power management functionality. */ int __init omap4_pm_init_early(void) { if (cpu_is_omap446x()) pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; if (soc_is_omap54xx() || soc_is_dra7xx()) pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE; return 0; } /** * omap4_pm_init - Init routine for OMAP4+ devices * * Initializes all powerdomain and clockdomain target states * and all PRCM settings. * Return: Returns the error code returned by called functions. */ int __init omap4_pm_init(void) { int ret = 0; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); return -ENODEV; } pr_info("Power Management for TI OMAP4+ devices.\n"); /* * OMAP4 chip PM currently works only with certain (newer) * versions of bootloaders. This is due to missing code in the * kernel to properly reset and initialize some devices. * http://www.spinics.net/lists/arm-kernel/msg218641.html */ if (cpu_is_omap44xx()) pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains.\n"); goto err2; } if (cpu_is_omap44xx()) ret = omap4_init_static_deps(); else if (soc_is_omap54xx() || soc_is_dra7xx()) ret = omap5_dra7_init_static_deps(); if (ret) { pr_err("Failed to initialise static dependencies.\n"); goto err2; } ret = omap4_mpuss_init(); if (ret) { pr_err("Failed to initialise OMAP4 MPUSS\n"); goto err2; } (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); omap_common_suspend_init(omap4_pm_suspend); /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; if (cpu_is_omap44xx()) omap4_idle_init(); err2: return ret; }