64 lines
2.4 KiB
Text
64 lines
2.4 KiB
Text
|
|
FORE Systems PCA-200E/SBA-200E ATM NIC driver
|
|
---------------------------------------------
|
|
|
|
This driver adds support for the FORE Systems 200E-series ATM adapters
|
|
to the Linux operating system. It is based on the earlier PCA-200E driver
|
|
written by Uwe Dannowski.
|
|
|
|
The driver simultaneously supports PCA-200E and SBA-200E adapters on
|
|
i386, alpha (untested), powerpc, sparc and sparc64 archs.
|
|
|
|
The intent is to enable the use of different models of FORE adapters at the
|
|
same time, by hosts that have several bus interfaces (such as PCI+SBUS,
|
|
or PCI+EISA).
|
|
|
|
Only PCI and SBUS devices are currently supported by the driver, but support
|
|
for other bus interfaces such as EISA should not be too hard to add.
|
|
|
|
|
|
Firmware Copyright Notice
|
|
-------------------------
|
|
|
|
Please read the fore200e_firmware_copyright file present
|
|
in the linux/drivers/atm directory for details and restrictions.
|
|
|
|
|
|
Firmware Updates
|
|
----------------
|
|
|
|
The FORE Systems 200E-series driver is shipped with firmware data being
|
|
uploaded to the ATM adapters at system boot time or at module loading time.
|
|
The supplied firmware images should work with all adapters.
|
|
|
|
However, if you encounter problems (the firmware doesn't start or the driver
|
|
is unable to read the PROM data), you may consider trying another firmware
|
|
version. Alternative binary firmware images can be found somewhere on the
|
|
ForeThought CD-ROM supplied with your adapter by FORE Systems.
|
|
|
|
You can also get the latest firmware images from FORE Systems at
|
|
http://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
|
|
the 'software updates' pages. The firmware binaries are part of
|
|
the various ForeThought software distributions.
|
|
|
|
Notice that different versions of the PCA-200E firmware exist, depending
|
|
on the endianness of the host architecture. The driver is shipped with
|
|
both little and big endian PCA firmware images.
|
|
|
|
Name and location of the new firmware images can be set at kernel
|
|
configuration time:
|
|
|
|
1. Copy the new firmware binary files (with .bin, .bin1 or .bin2 suffix)
|
|
to some directory, such as linux/drivers/atm.
|
|
|
|
2. Reconfigure your kernel to set the new firmware name and location.
|
|
Expected pathnames are absolute or relative to the drivers/atm directory.
|
|
|
|
3. Rebuild and re-install your kernel or your module.
|
|
|
|
|
|
Feedback
|
|
--------
|
|
|
|
Feedback is welcome. Please send success stories/bug reports/
|
|
patches/improvement/comments/flames to <lizzi@cnam.fr>.
|