566 lines
14 KiB
C
566 lines
14 KiB
C
/*
|
|
* arch/arm/mach-pxa/pcm990-baseboard.c
|
|
* Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
|
|
*
|
|
* Refer
|
|
* http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
|
|
* for additional hardware info
|
|
*
|
|
* Author: Juergen Kilb
|
|
* Created: April 05, 2005
|
|
* Copyright: Phytec Messtechnik GmbH
|
|
* e-Mail: armlinux@phytec.de
|
|
*
|
|
* based on Intel Mainstone Board
|
|
*
|
|
* Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/pxa-i2c.h>
|
|
#include <linux/pwm_backlight.h>
|
|
|
|
#include <media/mt9v022.h>
|
|
#include <media/soc_camera.h>
|
|
|
|
#include <linux/platform_data/camera-pxa.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/pxa27x.h>
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <mach/pcm990_baseboard.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
|
|
#include "devices.h"
|
|
#include "generic.h"
|
|
|
|
static unsigned long pcm990_pin_config[] __initdata = {
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
/* USB */
|
|
GPIO88_USBH1_PWR,
|
|
GPIO89_USBH1_PEN,
|
|
/* PWM0 */
|
|
GPIO16_PWM0_OUT,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
};
|
|
|
|
static void __iomem *pcm990_cpld_base;
|
|
|
|
static u8 pcm990_cpld_readb(unsigned int reg)
|
|
{
|
|
return readb(pcm990_cpld_base + reg);
|
|
}
|
|
|
|
static void pcm990_cpld_writeb(u8 value, unsigned int reg)
|
|
{
|
|
writeb(value, pcm990_cpld_base + reg);
|
|
}
|
|
|
|
/*
|
|
* pcm990_lcd_power - control power supply to the LCD
|
|
* @on: 0 = switch off, 1 = switch on
|
|
*
|
|
* Called by the pxafb driver
|
|
*/
|
|
#ifndef CONFIG_PCM990_DISPLAY_NONE
|
|
static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
|
|
{
|
|
if (on) {
|
|
/* enable LCD-Latches
|
|
* power on LCD
|
|
*/
|
|
pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
|
|
PCM990_CTRL_REG3);
|
|
} else {
|
|
/* disable LCD-Latches
|
|
* power off LCD
|
|
*/
|
|
pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCM990_DISPLAY_SHARP)
|
|
static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
|
|
.pixclock = 28000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 20,
|
|
.left_margin = 103,
|
|
.right_margin = 47,
|
|
.vsync_len = 6,
|
|
.upper_margin = 28,
|
|
.lower_margin = 5,
|
|
.sync = 0,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info pcm990_fbinfo __initdata = {
|
|
.modes = &fb_info_sharp_lq084v1dg21,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
.pxafb_lcd_power = pcm990_lcd_power,
|
|
};
|
|
#elif defined(CONFIG_PCM990_DISPLAY_NEC)
|
|
struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
|
|
.pixclock = 39720,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 32,
|
|
.left_margin = 16,
|
|
.right_margin = 48,
|
|
.vsync_len = 2,
|
|
.upper_margin = 12,
|
|
.lower_margin = 17,
|
|
.sync = 0,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info pcm990_fbinfo __initdata = {
|
|
.modes = &fb_info_nec_nl6448bc20_18d,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
.pxafb_lcd_power = pcm990_lcd_power,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_pwm_backlight_data pcm990_backlight_data = {
|
|
.pwm_id = 0,
|
|
.max_brightness = 1023,
|
|
.dft_brightness = 1023,
|
|
.pwm_period_ns = 78770,
|
|
.enable_gpio = -1,
|
|
};
|
|
|
|
static struct platform_device pcm990_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &pcm990_backlight_data,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* The PCM-990 development baseboard uses PCM-027's hardware in the
|
|
* following way:
|
|
*
|
|
* - LCD support is in use
|
|
* - GPIO16 is output for back light on/off with PWM
|
|
* - GPIO58 ... GPIO73 are outputs for display data
|
|
* - GPIO74 is output output for LCDFCLK
|
|
* - GPIO75 is output for LCDLCLK
|
|
* - GPIO76 is output for LCDPCLK
|
|
* - GPIO77 is output for LCDBIAS
|
|
* - MMC support is in use
|
|
* - GPIO32 is output for MMCCLK
|
|
* - GPIO92 is MMDAT0
|
|
* - GPIO109 is MMDAT1
|
|
* - GPIO110 is MMCS0
|
|
* - GPIO111 is MMCS1
|
|
* - GPIO112 is MMCMD
|
|
* - IDE/CF card is in use
|
|
* - GPIO48 is output /POE
|
|
* - GPIO49 is output /PWE
|
|
* - GPIO50 is output /PIOR
|
|
* - GPIO51 is output /PIOW
|
|
* - GPIO54 is output /PCE2
|
|
* - GPIO55 is output /PREG
|
|
* - GPIO56 is input /PWAIT
|
|
* - GPIO57 is output /PIOS16
|
|
* - GPIO79 is output PSKTSEL
|
|
* - GPIO85 is output /PCE1
|
|
* - FFUART is in use
|
|
* - GPIO34 is input FFRXD
|
|
* - GPIO35 is input FFCTS
|
|
* - GPIO36 is input FFDCD
|
|
* - GPIO37 is input FFDSR
|
|
* - GPIO38 is input FFRI
|
|
* - GPIO39 is output FFTXD
|
|
* - GPIO40 is output FFDTR
|
|
* - GPIO41 is output FFRTS
|
|
* - BTUART is in use
|
|
* - GPIO42 is input BTRXD
|
|
* - GPIO43 is output BTTXD
|
|
* - GPIO44 is input BTCTS
|
|
* - GPIO45 is output BTRTS
|
|
* - IRUART is in use
|
|
* - GPIO46 is input STDRXD
|
|
* - GPIO47 is output STDTXD
|
|
* - AC97 is in use*)
|
|
* - GPIO28 is input AC97CLK
|
|
* - GPIO29 is input AC97DatIn
|
|
* - GPIO30 is output AC97DatO
|
|
* - GPIO31 is output AC97SYNC
|
|
* - GPIO113 is output AC97_RESET
|
|
* - SSP is in use
|
|
* - GPIO23 is output SSPSCLK
|
|
* - GPIO24 is output chip select to Max7301
|
|
* - GPIO25 is output SSPTXD
|
|
* - GPIO26 is input SSPRXD
|
|
* - GPIO27 is input for Max7301 IRQ
|
|
* - GPIO53 is input SSPSYSCLK
|
|
* - SSP3 is in use
|
|
* - GPIO81 is output SSPTXD3
|
|
* - GPIO82 is input SSPRXD3
|
|
* - GPIO83 is output SSPSFRM
|
|
* - GPIO84 is output SSPCLK3
|
|
*
|
|
* Otherwise claimed GPIOs:
|
|
* GPIO1 -> IRQ from user switch
|
|
* GPIO9 -> IRQ from power management
|
|
* GPIO10 -> IRQ from WML9712 AC97 controller
|
|
* GPIO11 -> IRQ from IDE controller
|
|
* GPIO12 -> IRQ from CF controller
|
|
* GPIO13 -> IRQ from CF controller
|
|
* GPIO14 -> GPIO free
|
|
* GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
|
|
* GPIO19 -> GPIO free
|
|
* GPIO20 -> /SDCS2
|
|
* GPIO21 -> /CS3 PC card socket select
|
|
* GPIO33 -> /CS5 network controller select
|
|
* GPIO78 -> /CS2 (16 bit wide data path)
|
|
* GPIO80 -> /CS4 (16 bit wide data path)
|
|
* GPIO86 -> GPIO free
|
|
* GPIO87 -> GPIO free
|
|
* GPIO90 -> LED0 on CPU module
|
|
* GPIO91 -> LED1 on CPI module
|
|
* GPIO117 -> SCL
|
|
* GPIO118 -> SDA
|
|
*/
|
|
|
|
static unsigned long pcm990_irq_enabled;
|
|
|
|
static void pcm990_mask_ack_irq(struct irq_data *d)
|
|
{
|
|
int pcm990_irq = (d->irq - PCM027_IRQ(0));
|
|
|
|
pcm990_irq_enabled &= ~(1 << pcm990_irq);
|
|
|
|
pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
|
|
}
|
|
|
|
static void pcm990_unmask_irq(struct irq_data *d)
|
|
{
|
|
int pcm990_irq = (d->irq - PCM027_IRQ(0));
|
|
u8 val;
|
|
|
|
/* the irq can be acknowledged only if deasserted, so it's done here */
|
|
|
|
pcm990_irq_enabled |= (1 << pcm990_irq);
|
|
|
|
val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
|
|
val |= 1 << pcm990_irq;
|
|
pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
|
|
|
|
pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
|
|
}
|
|
|
|
static struct irq_chip pcm990_irq_chip = {
|
|
.irq_mask_ack = pcm990_mask_ack_irq,
|
|
.irq_unmask = pcm990_unmask_irq,
|
|
};
|
|
|
|
static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned long pending;
|
|
|
|
pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
|
|
pending &= pcm990_irq_enabled;
|
|
|
|
do {
|
|
/* clear our parent IRQ */
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
if (likely(pending)) {
|
|
irq = PCM027_IRQ(0) + __ffs(pending);
|
|
generic_handle_irq(irq);
|
|
}
|
|
pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
|
|
pending &= pcm990_irq_enabled;
|
|
} while (pending);
|
|
}
|
|
|
|
static void __init pcm990_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
/* setup extra PCM990 irqs */
|
|
for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
|
|
irq_set_chip_and_handler(irq, &pcm990_irq_chip,
|
|
handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
|
|
/* disable all Interrupts */
|
|
pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
|
|
pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
|
|
|
|
irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
|
|
irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
|
|
}
|
|
|
|
static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, 0,
|
|
"MMC card detect", data);
|
|
if (err)
|
|
printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
|
|
"card detect IRQ\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data *p_d = dev->platform_data;
|
|
u8 val;
|
|
|
|
val = pcm990_cpld_readb(PCM990_CTRL_REG5);
|
|
|
|
if ((1 << vdd) & p_d->ocr_mask)
|
|
val |= PCM990_CTRL_MMC2PWR;
|
|
else
|
|
val &= ~PCM990_CTRL_MMC2PWR;
|
|
|
|
pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
|
|
return 0;
|
|
}
|
|
|
|
static void pcm990_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(PCM027_MMCDET_IRQ, data);
|
|
}
|
|
|
|
#define MSECS_PER_JIFFY (1000/HZ)
|
|
|
|
static struct pxamci_platform_data pcm990_mci_platform_data = {
|
|
.detect_delay_ms = 250,
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.init = pcm990_mci_init,
|
|
.setpower = pcm990_mci_setpower,
|
|
.exit = pcm990_mci_exit,
|
|
.gpio_card_detect = -1,
|
|
.gpio_card_ro = -1,
|
|
.gpio_power = -1,
|
|
};
|
|
|
|
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
.power_on_delay = 10,
|
|
};
|
|
|
|
/*
|
|
* PXA27x Camera specific stuff
|
|
*/
|
|
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
|
|
static unsigned long pcm990_camera_pin_config[] = {
|
|
/* CIF */
|
|
GPIO98_CIF_DD_0,
|
|
GPIO105_CIF_DD_1,
|
|
GPIO104_CIF_DD_2,
|
|
GPIO103_CIF_DD_3,
|
|
GPIO95_CIF_DD_4,
|
|
GPIO94_CIF_DD_5,
|
|
GPIO93_CIF_DD_6,
|
|
GPIO108_CIF_DD_7,
|
|
GPIO107_CIF_DD_8,
|
|
GPIO106_CIF_DD_9,
|
|
GPIO42_CIF_MCLK,
|
|
GPIO45_CIF_PCLK,
|
|
GPIO43_CIF_FV,
|
|
GPIO44_CIF_LV,
|
|
};
|
|
|
|
/*
|
|
* CICR4: PCLK_EN: Pixel clock is supplied by the sensor
|
|
* MCLK_EN: Master clock is generated by PXA
|
|
* PCP: Data sampled on the falling edge of pixel clock
|
|
*/
|
|
struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
|
|
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
|
|
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
|
|
.mclk_10khz = 1000,
|
|
};
|
|
|
|
#include <linux/platform_data/pca953x.h>
|
|
|
|
static struct pca953x_platform_data pca9536_data = {
|
|
.gpio_base = PXA_NR_BUILTIN_GPIO,
|
|
};
|
|
|
|
static int gpio_bus_switch = -EINVAL;
|
|
|
|
static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
|
|
unsigned long flags)
|
|
{
|
|
if (gpio_bus_switch < 0) {
|
|
if (flags == SOCAM_DATAWIDTH_10)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flags & SOCAM_DATAWIDTH_8)
|
|
gpio_set_value_cansleep(gpio_bus_switch, 1);
|
|
else
|
|
gpio_set_value_cansleep(gpio_bus_switch, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
|
|
{
|
|
int ret;
|
|
|
|
if (gpio_bus_switch < 0) {
|
|
ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
|
|
if (!ret) {
|
|
gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
|
|
gpio_direction_output(gpio_bus_switch, 0);
|
|
}
|
|
}
|
|
|
|
if (gpio_bus_switch >= 0)
|
|
return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
|
|
else
|
|
return SOCAM_DATAWIDTH_10;
|
|
}
|
|
|
|
static void pcm990_camera_free_bus(struct soc_camera_link *link)
|
|
{
|
|
if (gpio_bus_switch < 0)
|
|
return;
|
|
|
|
gpio_free(gpio_bus_switch);
|
|
gpio_bus_switch = -EINVAL;
|
|
}
|
|
|
|
/* Board I2C devices. */
|
|
static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
|
|
{
|
|
/* Must initialize before the camera(s) */
|
|
I2C_BOARD_INFO("pca9536", 0x41),
|
|
.platform_data = &pca9536_data,
|
|
},
|
|
};
|
|
|
|
static struct mt9v022_platform_data mt9v022_pdata = {
|
|
.y_skip_top = 1,
|
|
};
|
|
|
|
static struct i2c_board_info pcm990_camera_i2c[] = {
|
|
{
|
|
I2C_BOARD_INFO("mt9v022", 0x48),
|
|
}, {
|
|
I2C_BOARD_INFO("mt9m001", 0x5d),
|
|
},
|
|
};
|
|
|
|
static struct soc_camera_link iclink[] = {
|
|
{
|
|
.bus_id = 0, /* Must match with the camera ID */
|
|
.board_info = &pcm990_camera_i2c[0],
|
|
.priv = &mt9v022_pdata,
|
|
.i2c_adapter_id = 0,
|
|
.query_bus_param = pcm990_camera_query_bus_param,
|
|
.set_bus_param = pcm990_camera_set_bus_param,
|
|
.free_bus = pcm990_camera_free_bus,
|
|
}, {
|
|
.bus_id = 0, /* Must match with the camera ID */
|
|
.board_info = &pcm990_camera_i2c[1],
|
|
.i2c_adapter_id = 0,
|
|
.query_bus_param = pcm990_camera_query_bus_param,
|
|
.set_bus_param = pcm990_camera_set_bus_param,
|
|
.free_bus = pcm990_camera_free_bus,
|
|
},
|
|
};
|
|
|
|
static struct platform_device pcm990_camera[] = {
|
|
{
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &iclink[0],
|
|
},
|
|
}, {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &iclink[1],
|
|
},
|
|
},
|
|
};
|
|
#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
|
|
|
|
/*
|
|
* system init for baseboard usage. Will be called by pcm027 init.
|
|
*
|
|
* Add platform devices present on this baseboard and init
|
|
* them from CPU side as far as required to use them later on
|
|
*/
|
|
void __init pcm990_baseboard_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
|
|
|
|
pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
|
|
if (!pcm990_cpld_base) {
|
|
pr_err("pcm990: failed to ioremap cpld\n");
|
|
return;
|
|
}
|
|
|
|
/* register CPLD's IRQ controller */
|
|
pcm990_init_irq();
|
|
|
|
#ifndef CONFIG_PCM990_DISPLAY_NONE
|
|
pxa_set_fb_info(NULL, &pcm990_fbinfo);
|
|
#endif
|
|
platform_device_register(&pcm990_backlight_device);
|
|
|
|
/* MMC */
|
|
pxa_set_mci_info(&pcm990_mci_platform_data);
|
|
|
|
/* USB host */
|
|
pxa_set_ohci_info(&pcm990_ohci_platform_data);
|
|
|
|
pxa_set_i2c_info(NULL);
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
|
|
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
|
|
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
|
|
|
|
platform_device_register(&pcm990_camera[0]);
|
|
platform_device_register(&pcm990_camera[1]);
|
|
#endif
|
|
|
|
printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
|
|
}
|