284 lines
6.9 KiB
C
284 lines
6.9 KiB
C
/*
|
|
* i8259 interrupt controller driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/i8259.h>
|
|
#include <asm/prom.h>
|
|
|
|
static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
|
|
|
|
static unsigned char cached_8259[2] = { 0xff, 0xff };
|
|
#define cached_A1 (cached_8259[0])
|
|
#define cached_21 (cached_8259[1])
|
|
|
|
static DEFINE_RAW_SPINLOCK(i8259_lock);
|
|
|
|
static struct irq_domain *i8259_host;
|
|
|
|
/*
|
|
* Acknowledge the IRQ using either the PCI host bridge's interrupt
|
|
* acknowledge feature or poll. How i8259_init() is called determines
|
|
* which is called. It should be noted that polling is broken on some
|
|
* IBM and Motorola PReP boxes so we must use the int-ack feature on them.
|
|
*/
|
|
unsigned int i8259_irq(void)
|
|
{
|
|
int irq;
|
|
int lock = 0;
|
|
|
|
/* Either int-ack or poll for the IRQ */
|
|
if (pci_intack)
|
|
irq = readb(pci_intack);
|
|
else {
|
|
raw_spin_lock(&i8259_lock);
|
|
lock = 1;
|
|
|
|
/* Perform an interrupt acknowledge cycle on controller 1. */
|
|
outb(0x0C, 0x20); /* prepare for poll */
|
|
irq = inb(0x20) & 7;
|
|
if (irq == 2 ) {
|
|
/*
|
|
* Interrupt is cascaded so perform interrupt
|
|
* acknowledge on controller 2.
|
|
*/
|
|
outb(0x0C, 0xA0); /* prepare for poll */
|
|
irq = (inb(0xA0) & 7) + 8;
|
|
}
|
|
}
|
|
|
|
if (irq == 7) {
|
|
/*
|
|
* This may be a spurious interrupt.
|
|
*
|
|
* Read the interrupt status register (ISR). If the most
|
|
* significant bit is not set then there is no valid
|
|
* interrupt.
|
|
*/
|
|
if (!pci_intack)
|
|
outb(0x0B, 0x20); /* ISR register */
|
|
if(~inb(0x20) & 0x80)
|
|
irq = NO_IRQ;
|
|
} else if (irq == 0xff)
|
|
irq = NO_IRQ;
|
|
|
|
if (lock)
|
|
raw_spin_unlock(&i8259_lock);
|
|
return irq;
|
|
}
|
|
|
|
static void i8259_mask_and_ack_irq(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&i8259_lock, flags);
|
|
if (d->irq > 7) {
|
|
cached_A1 |= 1 << (d->irq-8);
|
|
inb(0xA1); /* DUMMY */
|
|
outb(cached_A1, 0xA1);
|
|
outb(0x20, 0xA0); /* Non-specific EOI */
|
|
outb(0x20, 0x20); /* Non-specific EOI to cascade */
|
|
} else {
|
|
cached_21 |= 1 << d->irq;
|
|
inb(0x21); /* DUMMY */
|
|
outb(cached_21, 0x21);
|
|
outb(0x20, 0x20); /* Non-specific EOI */
|
|
}
|
|
raw_spin_unlock_irqrestore(&i8259_lock, flags);
|
|
}
|
|
|
|
static void i8259_set_irq_mask(int irq_nr)
|
|
{
|
|
outb(cached_A1,0xA1);
|
|
outb(cached_21,0x21);
|
|
}
|
|
|
|
static void i8259_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
pr_debug("i8259_mask_irq(%d)\n", d->irq);
|
|
|
|
raw_spin_lock_irqsave(&i8259_lock, flags);
|
|
if (d->irq < 8)
|
|
cached_21 |= 1 << d->irq;
|
|
else
|
|
cached_A1 |= 1 << (d->irq-8);
|
|
i8259_set_irq_mask(d->irq);
|
|
raw_spin_unlock_irqrestore(&i8259_lock, flags);
|
|
}
|
|
|
|
static void i8259_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
pr_debug("i8259_unmask_irq(%d)\n", d->irq);
|
|
|
|
raw_spin_lock_irqsave(&i8259_lock, flags);
|
|
if (d->irq < 8)
|
|
cached_21 &= ~(1 << d->irq);
|
|
else
|
|
cached_A1 &= ~(1 << (d->irq-8));
|
|
i8259_set_irq_mask(d->irq);
|
|
raw_spin_unlock_irqrestore(&i8259_lock, flags);
|
|
}
|
|
|
|
static struct irq_chip i8259_pic = {
|
|
.name = "i8259",
|
|
.irq_mask = i8259_mask_irq,
|
|
.irq_disable = i8259_mask_irq,
|
|
.irq_unmask = i8259_unmask_irq,
|
|
.irq_mask_ack = i8259_mask_and_ack_irq,
|
|
};
|
|
|
|
static struct resource pic1_iores = {
|
|
.name = "8259 (master)",
|
|
.start = 0x20,
|
|
.end = 0x21,
|
|
.flags = IORESOURCE_BUSY,
|
|
};
|
|
|
|
static struct resource pic2_iores = {
|
|
.name = "8259 (slave)",
|
|
.start = 0xa0,
|
|
.end = 0xa1,
|
|
.flags = IORESOURCE_BUSY,
|
|
};
|
|
|
|
static struct resource pic_edgectrl_iores = {
|
|
.name = "8259 edge control",
|
|
.start = 0x4d0,
|
|
.end = 0x4d1,
|
|
.flags = IORESOURCE_BUSY,
|
|
};
|
|
|
|
static int i8259_host_match(struct irq_domain *h, struct device_node *node)
|
|
{
|
|
return h->of_node == NULL || h->of_node == node;
|
|
}
|
|
|
|
static int i8259_host_map(struct irq_domain *h, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
|
|
|
|
/* We block the internal cascade */
|
|
if (hw == 2)
|
|
irq_set_status_flags(virq, IRQ_NOREQUEST);
|
|
|
|
/* We use the level handler only for now, we might want to
|
|
* be more cautious here but that works for now
|
|
*/
|
|
irq_set_status_flags(virq, IRQ_LEVEL);
|
|
irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq);
|
|
return 0;
|
|
}
|
|
|
|
static int i8259_host_xlate(struct irq_domain *h, struct device_node *ct,
|
|
const u32 *intspec, unsigned int intsize,
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
|
|
{
|
|
static unsigned char map_isa_senses[4] = {
|
|
IRQ_TYPE_LEVEL_LOW,
|
|
IRQ_TYPE_LEVEL_HIGH,
|
|
IRQ_TYPE_EDGE_FALLING,
|
|
IRQ_TYPE_EDGE_RISING,
|
|
};
|
|
|
|
*out_hwirq = intspec[0];
|
|
if (intsize > 1 && intspec[1] < 4)
|
|
*out_flags = map_isa_senses[intspec[1]];
|
|
else
|
|
*out_flags = IRQ_TYPE_NONE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops i8259_host_ops = {
|
|
.match = i8259_host_match,
|
|
.map = i8259_host_map,
|
|
.xlate = i8259_host_xlate,
|
|
};
|
|
|
|
struct irq_domain *i8259_get_host(void)
|
|
{
|
|
return i8259_host;
|
|
}
|
|
|
|
/**
|
|
* i8259_init - Initialize the legacy controller
|
|
* @node: device node of the legacy PIC (can be NULL, but then, it will match
|
|
* all interrupts, so beware)
|
|
* @intack_addr: PCI interrupt acknowledge (real) address which will return
|
|
* the active irq from the 8259
|
|
*/
|
|
void i8259_init(struct device_node *node, unsigned long intack_addr)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* initialize the controller */
|
|
raw_spin_lock_irqsave(&i8259_lock, flags);
|
|
|
|
/* Mask all first */
|
|
outb(0xff, 0xA1);
|
|
outb(0xff, 0x21);
|
|
|
|
/* init master interrupt controller */
|
|
outb(0x11, 0x20); /* Start init sequence */
|
|
outb(0x00, 0x21); /* Vector base */
|
|
outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
|
|
outb(0x01, 0x21); /* Select 8086 mode */
|
|
|
|
/* init slave interrupt controller */
|
|
outb(0x11, 0xA0); /* Start init sequence */
|
|
outb(0x08, 0xA1); /* Vector base */
|
|
outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
|
|
outb(0x01, 0xA1); /* Select 8086 mode */
|
|
|
|
/* That thing is slow */
|
|
udelay(100);
|
|
|
|
/* always read ISR */
|
|
outb(0x0B, 0x20);
|
|
outb(0x0B, 0xA0);
|
|
|
|
/* Unmask the internal cascade */
|
|
cached_21 &= ~(1 << 2);
|
|
|
|
/* Set interrupt masks */
|
|
outb(cached_A1, 0xA1);
|
|
outb(cached_21, 0x21);
|
|
|
|
raw_spin_unlock_irqrestore(&i8259_lock, flags);
|
|
|
|
/* create a legacy host */
|
|
i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
|
|
if (i8259_host == NULL) {
|
|
printk(KERN_ERR "i8259: failed to allocate irq host !\n");
|
|
return;
|
|
}
|
|
|
|
/* reserve our resources */
|
|
/* XXX should we continue doing that ? it seems to cause problems
|
|
* with further requesting of PCI IO resources for that range...
|
|
* need to look into it.
|
|
*/
|
|
request_resource(&ioport_resource, &pic1_iores);
|
|
request_resource(&ioport_resource, &pic2_iores);
|
|
request_resource(&ioport_resource, &pic_edgectrl_iores);
|
|
|
|
if (intack_addr != 0)
|
|
pci_intack = ioremap(intack_addr, 1);
|
|
|
|
printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
|
|
}
|