672 lines
19 KiB
C
672 lines
19 KiB
C
/*
|
|
* Copyright © 2009 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include "framebuffer.h"
|
|
#include "psb_drv.h"
|
|
#include "psb_intel_drv.h"
|
|
#include "psb_intel_reg.h"
|
|
#include "gma_display.h"
|
|
#include "power.h"
|
|
|
|
#define MRST_LIMIT_LVDS_100L 0
|
|
#define MRST_LIMIT_LVDS_83 1
|
|
#define MRST_LIMIT_LVDS_100 2
|
|
#define MRST_LIMIT_SDVO 3
|
|
|
|
#define MRST_DOT_MIN 19750
|
|
#define MRST_DOT_MAX 120000
|
|
#define MRST_M_MIN_100L 20
|
|
#define MRST_M_MIN_100 10
|
|
#define MRST_M_MIN_83 12
|
|
#define MRST_M_MAX_100L 34
|
|
#define MRST_M_MAX_100 17
|
|
#define MRST_M_MAX_83 20
|
|
#define MRST_P1_MIN 2
|
|
#define MRST_P1_MAX_0 7
|
|
#define MRST_P1_MAX_1 8
|
|
|
|
static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
|
|
struct drm_crtc *crtc, int target,
|
|
int refclk, struct gma_clock_t *best_clock);
|
|
|
|
static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
|
|
struct drm_crtc *crtc, int target,
|
|
int refclk, struct gma_clock_t *best_clock);
|
|
|
|
static const struct gma_limit_t mrst_limits[] = {
|
|
{ /* MRST_LIMIT_LVDS_100L */
|
|
.dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
|
|
.m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
|
|
.p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
|
|
.find_pll = mrst_lvds_find_best_pll,
|
|
},
|
|
{ /* MRST_LIMIT_LVDS_83L */
|
|
.dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
|
|
.m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
|
|
.p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
|
|
.find_pll = mrst_lvds_find_best_pll,
|
|
},
|
|
{ /* MRST_LIMIT_LVDS_100 */
|
|
.dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
|
|
.m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
|
|
.p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
|
|
.find_pll = mrst_lvds_find_best_pll,
|
|
},
|
|
{ /* MRST_LIMIT_SDVO */
|
|
.vco = {.min = 1400000, .max = 2800000},
|
|
.n = {.min = 3, .max = 7},
|
|
.m = {.min = 80, .max = 137},
|
|
.p1 = {.min = 1, .max = 2},
|
|
.p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10},
|
|
.find_pll = mrst_sdvo_find_best_pll,
|
|
},
|
|
};
|
|
|
|
#define MRST_M_MIN 10
|
|
static const u32 oaktrail_m_converts[] = {
|
|
0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
|
|
0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
|
|
0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
|
|
};
|
|
|
|
static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc,
|
|
int refclk)
|
|
{
|
|
const struct gma_limit_t *limit = NULL;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_psb_private *dev_priv = dev->dev_private;
|
|
|
|
if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
|
|
|| gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
|
|
switch (dev_priv->core_freq) {
|
|
case 100:
|
|
limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
|
|
break;
|
|
case 166:
|
|
limit = &mrst_limits[MRST_LIMIT_LVDS_83];
|
|
break;
|
|
case 200:
|
|
limit = &mrst_limits[MRST_LIMIT_LVDS_100];
|
|
break;
|
|
}
|
|
} else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
|
|
limit = &mrst_limits[MRST_LIMIT_SDVO];
|
|
} else {
|
|
limit = NULL;
|
|
dev_err(dev->dev, "mrst_limit Wrong display type.\n");
|
|
}
|
|
|
|
return limit;
|
|
}
|
|
|
|
/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
|
|
static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock)
|
|
{
|
|
clock->dot = (refclk * clock->m) / (14 * clock->p1);
|
|
}
|
|
|
|
static void mrst_print_pll(struct gma_clock_t *clock)
|
|
{
|
|
DRM_DEBUG_DRIVER("dotclock=%d, m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n",
|
|
clock->dot, clock->m, clock->m1, clock->m2, clock->n,
|
|
clock->p1, clock->p2);
|
|
}
|
|
|
|
static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
|
|
struct drm_crtc *crtc, int target,
|
|
int refclk, struct gma_clock_t *best_clock)
|
|
{
|
|
struct gma_clock_t clock;
|
|
u32 target_vco, actual_freq;
|
|
s32 freq_error, min_error = 100000;
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
|
|
for (clock.n = limit->n.min; clock.n <= limit->n.max;
|
|
clock.n++) {
|
|
for (clock.p1 = limit->p1.min;
|
|
clock.p1 <= limit->p1.max; clock.p1++) {
|
|
/* p2 value always stored in p2_slow on SDVO */
|
|
clock.p = clock.p1 * limit->p2.p2_slow;
|
|
target_vco = target * clock.p;
|
|
|
|
/* VCO will increase at this point so break */
|
|
if (target_vco > limit->vco.max)
|
|
break;
|
|
|
|
if (target_vco < limit->vco.min)
|
|
continue;
|
|
|
|
actual_freq = (refclk * clock.m) /
|
|
(clock.n * clock.p);
|
|
freq_error = 10000 -
|
|
((target * 10000) / actual_freq);
|
|
|
|
if (freq_error < -min_error) {
|
|
/* freq_error will start to decrease at
|
|
this point so break */
|
|
break;
|
|
}
|
|
|
|
if (freq_error < 0)
|
|
freq_error = -freq_error;
|
|
|
|
if (freq_error < min_error) {
|
|
min_error = freq_error;
|
|
*best_clock = clock;
|
|
}
|
|
}
|
|
}
|
|
if (min_error == 0)
|
|
break;
|
|
}
|
|
|
|
return min_error == 0;
|
|
}
|
|
|
|
/**
|
|
* Returns a set of divisors for the desired target clock with the given refclk,
|
|
* or FALSE. Divisor values are the actual divisors for
|
|
*/
|
|
static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
|
|
struct drm_crtc *crtc, int target,
|
|
int refclk, struct gma_clock_t *best_clock)
|
|
{
|
|
struct gma_clock_t clock;
|
|
int err = target;
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
|
|
for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
|
|
clock.p1++) {
|
|
int this_err;
|
|
|
|
mrst_lvds_clock(refclk, &clock);
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err) {
|
|
*best_clock = clock;
|
|
err = this_err;
|
|
}
|
|
}
|
|
}
|
|
return err != target;
|
|
}
|
|
|
|
/**
|
|
* Sets the power management mode of the pipe and plane.
|
|
*
|
|
* This code should probably grow support for turning the cursor off and back
|
|
* on appropriately at the same time as we're turning the pipe off/on.
|
|
*/
|
|
static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_psb_private *dev_priv = dev->dev_private;
|
|
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
|
|
int pipe = gma_crtc->pipe;
|
|
const struct psb_offset *map = &dev_priv->regmap[pipe];
|
|
u32 temp;
|
|
int i;
|
|
int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
|
|
|
|
if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
|
|
oaktrail_crtc_hdmi_dpms(crtc, mode);
|
|
return;
|
|
}
|
|
|
|
if (!gma_power_begin(dev, true))
|
|
return;
|
|
|
|
/* XXX: When our outputs are all unaware of DPMS modes other than off
|
|
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
|
|
*/
|
|
switch (mode) {
|
|
case DRM_MODE_DPMS_ON:
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
for (i = 0; i <= need_aux; i++) {
|
|
/* Enable the DPLL */
|
|
temp = REG_READ_WITH_AUX(map->dpll, i);
|
|
if ((temp & DPLL_VCO_ENABLE) == 0) {
|
|
REG_WRITE_WITH_AUX(map->dpll, temp, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Wait for the clocks to stabilize. */
|
|
udelay(150);
|
|
REG_WRITE_WITH_AUX(map->dpll,
|
|
temp | DPLL_VCO_ENABLE, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Wait for the clocks to stabilize. */
|
|
udelay(150);
|
|
REG_WRITE_WITH_AUX(map->dpll,
|
|
temp | DPLL_VCO_ENABLE, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Wait for the clocks to stabilize. */
|
|
udelay(150);
|
|
}
|
|
|
|
/* Enable the pipe */
|
|
temp = REG_READ_WITH_AUX(map->conf, i);
|
|
if ((temp & PIPEACONF_ENABLE) == 0) {
|
|
REG_WRITE_WITH_AUX(map->conf,
|
|
temp | PIPEACONF_ENABLE, i);
|
|
}
|
|
|
|
/* Enable the plane */
|
|
temp = REG_READ_WITH_AUX(map->cntr, i);
|
|
if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
|
|
REG_WRITE_WITH_AUX(map->cntr,
|
|
temp | DISPLAY_PLANE_ENABLE,
|
|
i);
|
|
/* Flush the plane changes */
|
|
REG_WRITE_WITH_AUX(map->base,
|
|
REG_READ_WITH_AUX(map->base, i), i);
|
|
}
|
|
|
|
}
|
|
gma_crtc_load_lut(crtc);
|
|
|
|
/* Give the overlay scaler a chance to enable
|
|
if it's on this pipe */
|
|
/* psb_intel_crtc_dpms_video(crtc, true); TODO */
|
|
break;
|
|
case DRM_MODE_DPMS_OFF:
|
|
/* Give the overlay scaler a chance to disable
|
|
* if it's on this pipe */
|
|
/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
|
|
|
|
for (i = 0; i <= need_aux; i++) {
|
|
/* Disable the VGA plane that we never use */
|
|
REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
|
|
/* Disable display plane */
|
|
temp = REG_READ_WITH_AUX(map->cntr, i);
|
|
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
|
|
REG_WRITE_WITH_AUX(map->cntr,
|
|
temp & ~DISPLAY_PLANE_ENABLE, i);
|
|
/* Flush the plane changes */
|
|
REG_WRITE_WITH_AUX(map->base,
|
|
REG_READ(map->base), i);
|
|
REG_READ_WITH_AUX(map->base, i);
|
|
}
|
|
|
|
/* Next, disable display pipes */
|
|
temp = REG_READ_WITH_AUX(map->conf, i);
|
|
if ((temp & PIPEACONF_ENABLE) != 0) {
|
|
REG_WRITE_WITH_AUX(map->conf,
|
|
temp & ~PIPEACONF_ENABLE, i);
|
|
REG_READ_WITH_AUX(map->conf, i);
|
|
}
|
|
/* Wait for for the pipe disable to take effect. */
|
|
gma_wait_for_vblank(dev);
|
|
|
|
temp = REG_READ_WITH_AUX(map->dpll, i);
|
|
if ((temp & DPLL_VCO_ENABLE) != 0) {
|
|
REG_WRITE_WITH_AUX(map->dpll,
|
|
temp & ~DPLL_VCO_ENABLE, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
}
|
|
|
|
/* Wait for the clocks to turn off. */
|
|
udelay(150);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Set FIFO Watermarks (values taken from EMGD) */
|
|
REG_WRITE(DSPARB, 0x3f80);
|
|
REG_WRITE(DSPFW1, 0x3f8f0404);
|
|
REG_WRITE(DSPFW2, 0x04040f04);
|
|
REG_WRITE(DSPFW3, 0x0);
|
|
REG_WRITE(DSPFW4, 0x04040404);
|
|
REG_WRITE(DSPFW5, 0x04040404);
|
|
REG_WRITE(DSPFW6, 0x78);
|
|
REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040);
|
|
|
|
gma_power_end(dev);
|
|
}
|
|
|
|
/**
|
|
* Return the pipe currently connected to the panel fitter,
|
|
* or -1 if the panel fitter is not present or not in use
|
|
*/
|
|
static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
|
|
{
|
|
u32 pfit_control;
|
|
|
|
pfit_control = REG_READ(PFIT_CONTROL);
|
|
|
|
/* See if the panel fitter is in use */
|
|
if ((pfit_control & PFIT_ENABLE) == 0)
|
|
return -1;
|
|
return (pfit_control >> 29) & 3;
|
|
}
|
|
|
|
static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode,
|
|
int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
|
|
struct drm_psb_private *dev_priv = dev->dev_private;
|
|
int pipe = gma_crtc->pipe;
|
|
const struct psb_offset *map = &dev_priv->regmap[pipe];
|
|
int refclk = 0;
|
|
struct gma_clock_t clock;
|
|
const struct gma_limit_t *limit;
|
|
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
|
|
bool ok, is_sdvo = false;
|
|
bool is_lvds = false;
|
|
bool is_mipi = false;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct gma_encoder *gma_encoder = NULL;
|
|
uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
|
|
struct drm_connector *connector;
|
|
int i;
|
|
int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
|
|
|
|
if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
|
|
return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
|
|
|
|
if (!gma_power_begin(dev, true))
|
|
return 0;
|
|
|
|
memcpy(&gma_crtc->saved_mode,
|
|
mode,
|
|
sizeof(struct drm_display_mode));
|
|
memcpy(&gma_crtc->saved_adjusted_mode,
|
|
adjusted_mode,
|
|
sizeof(struct drm_display_mode));
|
|
|
|
list_for_each_entry(connector, &mode_config->connector_list, head) {
|
|
if (!connector->encoder || connector->encoder->crtc != crtc)
|
|
continue;
|
|
|
|
gma_encoder = gma_attached_encoder(connector);
|
|
|
|
switch (gma_encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_SDVO:
|
|
is_sdvo = true;
|
|
break;
|
|
case INTEL_OUTPUT_MIPI:
|
|
is_mipi = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Disable the VGA plane that we never use */
|
|
for (i = 0; i <= need_aux; i++)
|
|
REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
|
|
|
|
/* Disable the panel fitter if it was on our pipe */
|
|
if (oaktrail_panel_fitter_pipe(dev) == pipe)
|
|
REG_WRITE(PFIT_CONTROL, 0);
|
|
|
|
for (i = 0; i <= need_aux; i++) {
|
|
REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) |
|
|
(mode->crtc_vdisplay - 1), i);
|
|
}
|
|
|
|
if (gma_encoder)
|
|
drm_object_property_get_value(&connector->base,
|
|
dev->mode_config.scaling_mode_property, &scalingType);
|
|
|
|
if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
|
|
/* Moorestown doesn't have register support for centering so
|
|
* we need to mess with the h/vblank and h/vsync start and
|
|
* ends to get centering */
|
|
int offsetX = 0, offsetY = 0;
|
|
|
|
offsetX = (adjusted_mode->crtc_hdisplay -
|
|
mode->crtc_hdisplay) / 2;
|
|
offsetY = (adjusted_mode->crtc_vdisplay -
|
|
mode->crtc_vdisplay) / 2;
|
|
|
|
for (i = 0; i <= need_aux; i++) {
|
|
REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) |
|
|
((adjusted_mode->crtc_htotal - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) |
|
|
((adjusted_mode->crtc_vtotal - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->hblank,
|
|
(adjusted_mode->crtc_hblank_start - offsetX - 1) |
|
|
((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->hsync,
|
|
(adjusted_mode->crtc_hsync_start - offsetX - 1) |
|
|
((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vblank,
|
|
(adjusted_mode->crtc_vblank_start - offsetY - 1) |
|
|
((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vsync,
|
|
(adjusted_mode->crtc_vsync_start - offsetY - 1) |
|
|
((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i);
|
|
}
|
|
} else {
|
|
for (i = 0; i <= need_aux; i++) {
|
|
REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
|
|
((adjusted_mode->crtc_htotal - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
|
|
((adjusted_mode->crtc_vtotal - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
|
|
((adjusted_mode->crtc_hblank_end - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
|
|
((adjusted_mode->crtc_hsync_end - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
|
|
((adjusted_mode->crtc_vblank_end - 1) << 16), i);
|
|
REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
|
|
((adjusted_mode->crtc_vsync_end - 1) << 16), i);
|
|
}
|
|
}
|
|
|
|
/* Flush the plane changes */
|
|
{
|
|
struct drm_crtc_helper_funcs *crtc_funcs =
|
|
crtc->helper_private;
|
|
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
|
|
}
|
|
|
|
/* setup pipeconf */
|
|
pipeconf = REG_READ(map->conf);
|
|
|
|
/* Set up the display plane register */
|
|
dspcntr = REG_READ(map->cntr);
|
|
dspcntr |= DISPPLANE_GAMMA_ENABLE;
|
|
|
|
if (pipe == 0)
|
|
dspcntr |= DISPPLANE_SEL_PIPE_A;
|
|
else
|
|
dspcntr |= DISPPLANE_SEL_PIPE_B;
|
|
|
|
if (is_mipi)
|
|
goto oaktrail_crtc_mode_set_exit;
|
|
|
|
|
|
dpll = 0; /*BIT16 = 0 for 100MHz reference */
|
|
|
|
refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000;
|
|
limit = mrst_limit(crtc, refclk);
|
|
ok = limit->find_pll(limit, crtc, adjusted_mode->clock,
|
|
refclk, &clock);
|
|
|
|
if (is_sdvo) {
|
|
/* Convert calculated values to register values */
|
|
clock.p1 = (1L << (clock.p1 - 1));
|
|
clock.m -= 2;
|
|
clock.n = (1L << (clock.n - 1));
|
|
}
|
|
|
|
if (!ok)
|
|
DRM_ERROR("Failed to find proper PLL settings");
|
|
|
|
mrst_print_pll(&clock);
|
|
|
|
if (is_sdvo)
|
|
fp = clock.n << 16 | clock.m;
|
|
else
|
|
fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
|
|
|
|
dpll |= DPLL_VGA_MODE_DIS;
|
|
|
|
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
|
|
if (is_lvds)
|
|
dpll |= DPLLA_MODE_LVDS;
|
|
else
|
|
dpll |= DPLLB_MODE_DAC_SERIAL;
|
|
|
|
if (is_sdvo) {
|
|
int sdvo_pixel_multiply =
|
|
adjusted_mode->clock / mode->clock;
|
|
|
|
dpll |= DPLL_DVO_HIGH_SPEED;
|
|
dpll |=
|
|
(sdvo_pixel_multiply -
|
|
1) << SDVO_MULTIPLIER_SHIFT_HIRES;
|
|
}
|
|
|
|
|
|
/* compute bitmask from p1 value */
|
|
if (is_sdvo)
|
|
dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16;
|
|
else
|
|
dpll |= (1 << (clock.p1 - 2)) << 17;
|
|
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
|
|
if (dpll & DPLL_VCO_ENABLE) {
|
|
for (i = 0; i <= need_aux; i++) {
|
|
REG_WRITE_WITH_AUX(map->fp0, fp, i);
|
|
REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Check the DPLLA lock bit PIPEACONF[29] */
|
|
udelay(150);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i <= need_aux; i++) {
|
|
REG_WRITE_WITH_AUX(map->fp0, fp, i);
|
|
REG_WRITE_WITH_AUX(map->dpll, dpll, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Wait for the clocks to stabilize. */
|
|
udelay(150);
|
|
|
|
/* write it again -- the BIOS does, after all */
|
|
REG_WRITE_WITH_AUX(map->dpll, dpll, i);
|
|
REG_READ_WITH_AUX(map->dpll, i);
|
|
/* Wait for the clocks to stabilize. */
|
|
udelay(150);
|
|
|
|
REG_WRITE_WITH_AUX(map->conf, pipeconf, i);
|
|
REG_READ_WITH_AUX(map->conf, i);
|
|
gma_wait_for_vblank(dev);
|
|
|
|
REG_WRITE_WITH_AUX(map->cntr, dspcntr, i);
|
|
gma_wait_for_vblank(dev);
|
|
}
|
|
|
|
oaktrail_crtc_mode_set_exit:
|
|
gma_power_end(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int oaktrail_pipe_set_base(struct drm_crtc *crtc,
|
|
int x, int y, struct drm_framebuffer *old_fb)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_psb_private *dev_priv = dev->dev_private;
|
|
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
|
|
struct psb_framebuffer *psbfb = to_psb_fb(crtc->primary->fb);
|
|
int pipe = gma_crtc->pipe;
|
|
const struct psb_offset *map = &dev_priv->regmap[pipe];
|
|
unsigned long start, offset;
|
|
|
|
u32 dspcntr;
|
|
int ret = 0;
|
|
|
|
/* no fb bound */
|
|
if (!crtc->primary->fb) {
|
|
dev_dbg(dev->dev, "No FB bound\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!gma_power_begin(dev, true))
|
|
return 0;
|
|
|
|
start = psbfb->gtt->offset;
|
|
offset = y * crtc->primary->fb->pitches[0] + x * (crtc->primary->fb->bits_per_pixel / 8);
|
|
|
|
REG_WRITE(map->stride, crtc->primary->fb->pitches[0]);
|
|
|
|
dspcntr = REG_READ(map->cntr);
|
|
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
|
|
|
|
switch (crtc->primary->fb->bits_per_pixel) {
|
|
case 8:
|
|
dspcntr |= DISPPLANE_8BPP;
|
|
break;
|
|
case 16:
|
|
if (crtc->primary->fb->depth == 15)
|
|
dspcntr |= DISPPLANE_15_16BPP;
|
|
else
|
|
dspcntr |= DISPPLANE_16BPP;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "Unknown color depth\n");
|
|
ret = -EINVAL;
|
|
goto pipe_set_base_exit;
|
|
}
|
|
REG_WRITE(map->cntr, dspcntr);
|
|
|
|
REG_WRITE(map->base, offset);
|
|
REG_READ(map->base);
|
|
REG_WRITE(map->surf, start);
|
|
REG_READ(map->surf);
|
|
|
|
pipe_set_base_exit:
|
|
gma_power_end(dev);
|
|
return ret;
|
|
}
|
|
|
|
const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
|
|
.dpms = oaktrail_crtc_dpms,
|
|
.mode_fixup = gma_crtc_mode_fixup,
|
|
.mode_set = oaktrail_crtc_mode_set,
|
|
.mode_set_base = oaktrail_pipe_set_base,
|
|
.prepare = gma_crtc_prepare,
|
|
.commit = gma_crtc_commit,
|
|
};
|
|
|
|
/* Not used yet */
|
|
const struct gma_clock_funcs mrst_clock_funcs = {
|
|
.clock = mrst_lvds_clock,
|
|
.limit = mrst_limit,
|
|
.pll_is_valid = gma_pll_is_valid,
|
|
};
|