246 lines
6.2 KiB
C
246 lines
6.2 KiB
C
/*
|
|
* Hardware monitoring driver for UCD90xxx Sequencer and System Health
|
|
* Controller series
|
|
*
|
|
* Copyright (C) 2011 Ericsson AB.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/pmbus.h>
|
|
#include "pmbus.h"
|
|
|
|
enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 };
|
|
|
|
#define UCD9000_MONITOR_CONFIG 0xd5
|
|
#define UCD9000_NUM_PAGES 0xd6
|
|
#define UCD9000_FAN_CONFIG_INDEX 0xe7
|
|
#define UCD9000_FAN_CONFIG 0xe8
|
|
#define UCD9000_DEVICE_ID 0xfd
|
|
|
|
#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
|
|
#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
|
|
|
|
#define UCD9000_MON_VOLTAGE 1
|
|
#define UCD9000_MON_TEMPERATURE 2
|
|
#define UCD9000_MON_CURRENT 3
|
|
#define UCD9000_MON_VOLTAGE_HW 4
|
|
|
|
#define UCD9000_NUM_FAN 4
|
|
|
|
struct ucd9000_data {
|
|
u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
|
|
struct pmbus_driver_info info;
|
|
};
|
|
#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
|
|
|
|
static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
|
|
{
|
|
int fan_config = 0;
|
|
struct ucd9000_data *data
|
|
= to_ucd9000_data(pmbus_get_driver_info(client));
|
|
|
|
if (data->fan_data[fan][3] & 1)
|
|
fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */
|
|
|
|
/* Pulses/revolution */
|
|
fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
|
|
|
|
return fan_config;
|
|
}
|
|
|
|
static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
|
|
{
|
|
int ret = 0;
|
|
int fan_config;
|
|
|
|
switch (reg) {
|
|
case PMBUS_FAN_CONFIG_12:
|
|
if (page > 0)
|
|
return -ENXIO;
|
|
|
|
ret = ucd9000_get_fan_config(client, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
fan_config = ret << 4;
|
|
ret = ucd9000_get_fan_config(client, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
fan_config |= ret;
|
|
ret = fan_config;
|
|
break;
|
|
case PMBUS_FAN_CONFIG_34:
|
|
if (page > 0)
|
|
return -ENXIO;
|
|
|
|
ret = ucd9000_get_fan_config(client, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
fan_config = ret << 4;
|
|
ret = ucd9000_get_fan_config(client, 3);
|
|
if (ret < 0)
|
|
return ret;
|
|
fan_config |= ret;
|
|
ret = fan_config;
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id ucd9000_id[] = {
|
|
{"ucd9000", ucd9000},
|
|
{"ucd90120", ucd90120},
|
|
{"ucd90124", ucd90124},
|
|
{"ucd9090", ucd9090},
|
|
{"ucd90910", ucd90910},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ucd9000_id);
|
|
|
|
static int ucd9000_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
|
|
struct ucd9000_data *data;
|
|
struct pmbus_driver_info *info;
|
|
const struct i2c_device_id *mid;
|
|
int i, ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA))
|
|
return -ENODEV;
|
|
|
|
ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
|
|
block_buffer);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed to read device ID\n");
|
|
return ret;
|
|
}
|
|
block_buffer[ret] = '\0';
|
|
dev_info(&client->dev, "Device ID %s\n", block_buffer);
|
|
|
|
for (mid = ucd9000_id; mid->name[0]; mid++) {
|
|
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
|
|
break;
|
|
}
|
|
if (!mid->name[0]) {
|
|
dev_err(&client->dev, "Unsupported device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data)
|
|
dev_notice(&client->dev,
|
|
"Device mismatch: Configured %s, detected %s\n",
|
|
id->name, mid->name);
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct ucd9000_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
info = &data->info;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Failed to read number of active pages\n");
|
|
return ret;
|
|
}
|
|
info->pages = ret;
|
|
if (!info->pages) {
|
|
dev_err(&client->dev, "No pages configured\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* The internal temperature sensor is always active */
|
|
info->func[0] = PMBUS_HAVE_TEMP;
|
|
|
|
/* Everything else is configurable */
|
|
ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
|
|
block_buffer);
|
|
if (ret <= 0) {
|
|
dev_err(&client->dev, "Failed to read configuration data\n");
|
|
return -ENODEV;
|
|
}
|
|
for (i = 0; i < ret; i++) {
|
|
int page = UCD9000_MON_PAGE(block_buffer[i]);
|
|
|
|
if (page >= info->pages)
|
|
continue;
|
|
|
|
switch (UCD9000_MON_TYPE(block_buffer[i])) {
|
|
case UCD9000_MON_VOLTAGE:
|
|
case UCD9000_MON_VOLTAGE_HW:
|
|
info->func[page] |= PMBUS_HAVE_VOUT
|
|
| PMBUS_HAVE_STATUS_VOUT;
|
|
break;
|
|
case UCD9000_MON_TEMPERATURE:
|
|
info->func[page] |= PMBUS_HAVE_TEMP2
|
|
| PMBUS_HAVE_STATUS_TEMP;
|
|
break;
|
|
case UCD9000_MON_CURRENT:
|
|
info->func[page] |= PMBUS_HAVE_IOUT
|
|
| PMBUS_HAVE_STATUS_IOUT;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Fan configuration */
|
|
if (mid->driver_data == ucd90124) {
|
|
for (i = 0; i < UCD9000_NUM_FAN; i++) {
|
|
i2c_smbus_write_byte_data(client,
|
|
UCD9000_FAN_CONFIG_INDEX, i);
|
|
ret = i2c_smbus_read_block_data(client,
|
|
UCD9000_FAN_CONFIG,
|
|
data->fan_data[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
|
|
|
|
info->read_byte_data = ucd9000_read_byte_data;
|
|
info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
|
|
| PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
|
|
}
|
|
|
|
return pmbus_do_probe(client, mid, info);
|
|
}
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ucd9000_driver = {
|
|
.driver = {
|
|
.name = "ucd9000",
|
|
},
|
|
.probe = ucd9000_probe,
|
|
.remove = pmbus_do_remove,
|
|
.id_table = ucd9000_id,
|
|
};
|
|
|
|
module_i2c_driver(ucd9000_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck");
|
|
MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
|
|
MODULE_LICENSE("GPL");
|