439 lines
11 KiB
C
439 lines
11 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
|
|
* Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
|
|
*
|
|
* License terms:GNU General Public License (GPL) version 2
|
|
*
|
|
* Keypad controller driver for the SKE (Scroll Key Encoder) module used in
|
|
* the Nomadik 8815 and Ux500 platforms.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_data/keypad-nomadik-ske.h>
|
|
|
|
/* SKE_CR bits */
|
|
#define SKE_KPMLT (0x1 << 6)
|
|
#define SKE_KPCN (0x7 << 3)
|
|
#define SKE_KPASEN (0x1 << 2)
|
|
#define SKE_KPASON (0x1 << 7)
|
|
|
|
/* SKE_IMSC bits */
|
|
#define SKE_KPIMA (0x1 << 2)
|
|
|
|
/* SKE_ICR bits */
|
|
#define SKE_KPICS (0x1 << 3)
|
|
#define SKE_KPICA (0x1 << 2)
|
|
|
|
/* SKE_RIS bits */
|
|
#define SKE_KPRISA (0x1 << 2)
|
|
|
|
#define SKE_KEYPAD_ROW_SHIFT 3
|
|
#define SKE_KPD_NUM_ROWS 8
|
|
#define SKE_KPD_NUM_COLS 8
|
|
|
|
/* keypad auto scan registers */
|
|
#define SKE_ASR0 0x20
|
|
#define SKE_ASR1 0x24
|
|
#define SKE_ASR2 0x28
|
|
#define SKE_ASR3 0x2C
|
|
|
|
#define SKE_NUM_ASRX_REGISTERS (4)
|
|
#define KEY_PRESSED_DELAY 10
|
|
|
|
/**
|
|
* struct ske_keypad - data structure used by keypad driver
|
|
* @irq: irq no
|
|
* @reg_base: ske regsiters base address
|
|
* @input: pointer to input device object
|
|
* @board: keypad platform device
|
|
* @keymap: matrix scan code table for keycodes
|
|
* @clk: clock structure pointer
|
|
*/
|
|
struct ske_keypad {
|
|
int irq;
|
|
void __iomem *reg_base;
|
|
struct input_dev *input;
|
|
const struct ske_keypad_platform_data *board;
|
|
unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
|
|
struct clk *clk;
|
|
struct clk *pclk;
|
|
spinlock_t ske_keypad_lock;
|
|
};
|
|
|
|
static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
|
|
u8 mask, u8 data)
|
|
{
|
|
u32 ret;
|
|
|
|
spin_lock(&keypad->ske_keypad_lock);
|
|
|
|
ret = readl(keypad->reg_base + addr);
|
|
ret &= ~mask;
|
|
ret |= data;
|
|
writel(ret, keypad->reg_base + addr);
|
|
|
|
spin_unlock(&keypad->ske_keypad_lock);
|
|
}
|
|
|
|
/*
|
|
* ske_keypad_chip_init: init keypad controller configuration
|
|
*
|
|
* Enable Multi key press detection, auto scan mode
|
|
*/
|
|
static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
|
|
{
|
|
u32 value;
|
|
int timeout = keypad->board->debounce_ms;
|
|
|
|
/* check SKE_RIS to be 0 */
|
|
while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
|
|
cpu_relax();
|
|
|
|
if (!timeout)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* set debounce value
|
|
* keypad dbounce is configured in DBCR[15:8]
|
|
* dbounce value in steps of 32/32.768 ms
|
|
*/
|
|
spin_lock(&keypad->ske_keypad_lock);
|
|
value = readl(keypad->reg_base + SKE_DBCR);
|
|
value = value & 0xff;
|
|
value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
|
|
writel(value, keypad->reg_base + SKE_DBCR);
|
|
spin_unlock(&keypad->ske_keypad_lock);
|
|
|
|
/* enable multi key detection */
|
|
ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
|
|
|
|
/*
|
|
* set up the number of columns
|
|
* KPCN[5:3] defines no. of keypad columns to be auto scanned
|
|
*/
|
|
value = (keypad->board->kcol - 1) << 3;
|
|
ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
|
|
|
|
/* clear keypad interrupt for auto(and pending SW) scans */
|
|
ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
|
|
|
|
/* un-mask keypad interrupts */
|
|
ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
|
|
|
|
/* enable automatic scan */
|
|
ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
|
|
{
|
|
int row = 0, code, pos;
|
|
struct input_dev *input = keypad->input;
|
|
u32 ske_ris;
|
|
int key_pressed;
|
|
int num_of_rows;
|
|
|
|
/* find out the row */
|
|
num_of_rows = hweight8(status);
|
|
do {
|
|
pos = __ffs(status);
|
|
row = pos;
|
|
status &= ~(1 << pos);
|
|
|
|
code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
|
|
ske_ris = readl(keypad->reg_base + SKE_RIS);
|
|
key_pressed = ske_ris & SKE_KPRISA;
|
|
|
|
input_event(input, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(input, keypad->keymap[code], key_pressed);
|
|
input_sync(input);
|
|
num_of_rows--;
|
|
} while (num_of_rows);
|
|
}
|
|
|
|
static void ske_keypad_read_data(struct ske_keypad *keypad)
|
|
{
|
|
u8 status;
|
|
int col = 0;
|
|
int ske_asr, i;
|
|
|
|
/*
|
|
* Read the auto scan registers
|
|
*
|
|
* Each SKE_ASRx (x=0 to x=3) contains two row values.
|
|
* lower byte contains row value for column 2*x,
|
|
* upper byte contains row value for column 2*x + 1
|
|
*/
|
|
for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
|
|
ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
|
|
if (!ske_asr)
|
|
continue;
|
|
|
|
/* now that ASRx is zero, find out the coloumn x and row y */
|
|
status = ske_asr & 0xff;
|
|
if (status) {
|
|
col = i * 2;
|
|
ske_keypad_report(keypad, status, col);
|
|
}
|
|
status = (ske_asr & 0xff00) >> 8;
|
|
if (status) {
|
|
col = (i * 2) + 1;
|
|
ske_keypad_report(keypad, status, col);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
|
|
{
|
|
struct ske_keypad *keypad = dev_id;
|
|
int timeout = keypad->board->debounce_ms;
|
|
|
|
/* disable auto scan interrupt; mask the interrupt generated */
|
|
ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
|
|
ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
|
|
|
|
while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
|
|
cpu_relax();
|
|
|
|
/* SKEx registers are stable and can be read */
|
|
ske_keypad_read_data(keypad);
|
|
|
|
/* wait until raw interrupt is clear */
|
|
while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
|
|
msleep(KEY_PRESSED_DELAY);
|
|
|
|
/* enable auto scan interrupts */
|
|
ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init ske_keypad_probe(struct platform_device *pdev)
|
|
{
|
|
const struct ske_keypad_platform_data *plat =
|
|
dev_get_platdata(&pdev->dev);
|
|
struct ske_keypad *keypad;
|
|
struct input_dev *input;
|
|
struct resource *res;
|
|
int irq;
|
|
int error;
|
|
|
|
if (!plat) {
|
|
dev_err(&pdev->dev, "invalid keypad platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get keypad irq\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "missing platform resources\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
|
|
input = input_allocate_device();
|
|
if (!keypad || !input) {
|
|
dev_err(&pdev->dev, "failed to allocate keypad memory\n");
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
keypad->irq = irq;
|
|
keypad->board = plat;
|
|
keypad->input = input;
|
|
spin_lock_init(&keypad->ske_keypad_lock);
|
|
|
|
if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
|
|
dev_err(&pdev->dev, "failed to request I/O memory\n");
|
|
error = -EBUSY;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
keypad->reg_base = ioremap(res->start, resource_size(res));
|
|
if (!keypad->reg_base) {
|
|
dev_err(&pdev->dev, "failed to remap I/O memory\n");
|
|
error = -ENXIO;
|
|
goto err_free_mem_region;
|
|
}
|
|
|
|
keypad->pclk = clk_get(&pdev->dev, "apb_pclk");
|
|
if (IS_ERR(keypad->pclk)) {
|
|
dev_err(&pdev->dev, "failed to get pclk\n");
|
|
error = PTR_ERR(keypad->pclk);
|
|
goto err_iounmap;
|
|
}
|
|
|
|
keypad->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(keypad->clk)) {
|
|
dev_err(&pdev->dev, "failed to get clk\n");
|
|
error = PTR_ERR(keypad->clk);
|
|
goto err_pclk;
|
|
}
|
|
|
|
input->id.bustype = BUS_HOST;
|
|
input->name = "ux500-ske-keypad";
|
|
input->dev.parent = &pdev->dev;
|
|
|
|
error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
|
|
SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
|
|
keypad->keymap, input);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "Failed to build keymap\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
input_set_capability(input, EV_MSC, MSC_SCAN);
|
|
if (!plat->no_autorepeat)
|
|
__set_bit(EV_REP, input->evbit);
|
|
|
|
error = clk_prepare_enable(keypad->pclk);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "Failed to prepare/enable pclk\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
error = clk_prepare_enable(keypad->clk);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "Failed to prepare/enable clk\n");
|
|
goto err_pclk_disable;
|
|
}
|
|
|
|
|
|
/* go through board initialization helpers */
|
|
if (keypad->board->init)
|
|
keypad->board->init();
|
|
|
|
error = ske_keypad_chip_init(keypad);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "unable to init keypad hardware\n");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
|
|
IRQF_ONESHOT, "ske-keypad", keypad);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"unable to register input device: %d\n", error);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
if (plat->wakeup_enable)
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
platform_set_drvdata(pdev, keypad);
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(keypad->irq, keypad);
|
|
err_clk_disable:
|
|
clk_disable_unprepare(keypad->clk);
|
|
err_pclk_disable:
|
|
clk_disable_unprepare(keypad->pclk);
|
|
err_clk:
|
|
clk_put(keypad->clk);
|
|
err_pclk:
|
|
clk_put(keypad->pclk);
|
|
err_iounmap:
|
|
iounmap(keypad->reg_base);
|
|
err_free_mem_region:
|
|
release_mem_region(res->start, resource_size(res));
|
|
err_free_mem:
|
|
input_free_device(input);
|
|
kfree(keypad);
|
|
return error;
|
|
}
|
|
|
|
static int ske_keypad_remove(struct platform_device *pdev)
|
|
{
|
|
struct ske_keypad *keypad = platform_get_drvdata(pdev);
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
free_irq(keypad->irq, keypad);
|
|
|
|
input_unregister_device(keypad->input);
|
|
|
|
clk_disable_unprepare(keypad->clk);
|
|
clk_put(keypad->clk);
|
|
|
|
if (keypad->board->exit)
|
|
keypad->board->exit();
|
|
|
|
iounmap(keypad->reg_base);
|
|
release_mem_region(res->start, resource_size(res));
|
|
kfree(keypad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ske_keypad_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct ske_keypad *keypad = platform_get_drvdata(pdev);
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(irq);
|
|
else
|
|
ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ske_keypad_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct ske_keypad *keypad = platform_get_drvdata(pdev);
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(irq);
|
|
else
|
|
ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops,
|
|
ske_keypad_suspend, ske_keypad_resume);
|
|
|
|
static struct platform_driver ske_keypad_driver = {
|
|
.driver = {
|
|
.name = "nmk-ske-keypad",
|
|
.owner = THIS_MODULE,
|
|
.pm = &ske_keypad_dev_pm_ops,
|
|
},
|
|
.remove = ske_keypad_remove,
|
|
};
|
|
|
|
module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
|
|
MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
|
|
MODULE_ALIAS("platform:nomadik-ske-keypad");
|