2979 lines
88 KiB
C
2979 lines
88 KiB
C
/*
|
|
* adv7604 - Analog Devices ADV7604 video decoder driver
|
|
*
|
|
* Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
|
*
|
|
* This program is free software; you may redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* References (c = chapter, p = page):
|
|
* REF_01 - Analog devices, ADV7604, Register Settings Recommendations,
|
|
* Revision 2.5, June 2010
|
|
* REF_02 - Analog devices, Register map documentation, Documentation of
|
|
* the register maps, Software manual, Rev. F, June 2010
|
|
* REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <media/adv7604.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-of.h>
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "debug level (0-2)");
|
|
|
|
MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver");
|
|
MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
|
|
MODULE_AUTHOR("Mats Randgaard <mats.randgaard@cisco.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* ADV7604 system clock frequency */
|
|
#define ADV7604_fsc (28636360)
|
|
|
|
#define ADV7604_RGB_OUT (1 << 1)
|
|
|
|
#define ADV7604_OP_FORMAT_SEL_8BIT (0 << 0)
|
|
#define ADV7604_OP_FORMAT_SEL_10BIT (1 << 0)
|
|
#define ADV7604_OP_FORMAT_SEL_12BIT (2 << 0)
|
|
|
|
#define ADV7604_OP_MODE_SEL_SDR_422 (0 << 5)
|
|
#define ADV7604_OP_MODE_SEL_DDR_422 (1 << 5)
|
|
#define ADV7604_OP_MODE_SEL_SDR_444 (2 << 5)
|
|
#define ADV7604_OP_MODE_SEL_DDR_444 (3 << 5)
|
|
#define ADV7604_OP_MODE_SEL_SDR_422_2X (4 << 5)
|
|
#define ADV7604_OP_MODE_SEL_ADI_CM (5 << 5)
|
|
|
|
#define ADV7604_OP_CH_SEL_GBR (0 << 5)
|
|
#define ADV7604_OP_CH_SEL_GRB (1 << 5)
|
|
#define ADV7604_OP_CH_SEL_BGR (2 << 5)
|
|
#define ADV7604_OP_CH_SEL_RGB (3 << 5)
|
|
#define ADV7604_OP_CH_SEL_BRG (4 << 5)
|
|
#define ADV7604_OP_CH_SEL_RBG (5 << 5)
|
|
|
|
#define ADV7604_OP_SWAP_CB_CR (1 << 0)
|
|
|
|
enum adv7604_type {
|
|
ADV7604,
|
|
ADV7611,
|
|
};
|
|
|
|
struct adv7604_reg_seq {
|
|
unsigned int reg;
|
|
u8 val;
|
|
};
|
|
|
|
struct adv7604_format_info {
|
|
enum v4l2_mbus_pixelcode code;
|
|
u8 op_ch_sel;
|
|
bool rgb_out;
|
|
bool swap_cb_cr;
|
|
u8 op_format_sel;
|
|
};
|
|
|
|
struct adv7604_chip_info {
|
|
enum adv7604_type type;
|
|
|
|
bool has_afe;
|
|
unsigned int max_port;
|
|
unsigned int num_dv_ports;
|
|
|
|
unsigned int edid_enable_reg;
|
|
unsigned int edid_status_reg;
|
|
unsigned int lcf_reg;
|
|
|
|
unsigned int cable_det_mask;
|
|
unsigned int tdms_lock_mask;
|
|
unsigned int fmt_change_digital_mask;
|
|
|
|
const struct adv7604_format_info *formats;
|
|
unsigned int nformats;
|
|
|
|
void (*set_termination)(struct v4l2_subdev *sd, bool enable);
|
|
void (*setup_irqs)(struct v4l2_subdev *sd);
|
|
unsigned int (*read_hdmi_pixelclock)(struct v4l2_subdev *sd);
|
|
unsigned int (*read_cable_det)(struct v4l2_subdev *sd);
|
|
|
|
/* 0 = AFE, 1 = HDMI */
|
|
const struct adv7604_reg_seq *recommended_settings[2];
|
|
unsigned int num_recommended_settings[2];
|
|
|
|
unsigned long page_mask;
|
|
};
|
|
|
|
/*
|
|
**********************************************************************
|
|
*
|
|
* Arrays with configuration parameters for the ADV7604
|
|
*
|
|
**********************************************************************
|
|
*/
|
|
|
|
struct adv7604_state {
|
|
const struct adv7604_chip_info *info;
|
|
struct adv7604_platform_data pdata;
|
|
|
|
struct gpio_desc *hpd_gpio[4];
|
|
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pads[ADV7604_PAD_MAX];
|
|
unsigned int source_pad;
|
|
|
|
struct v4l2_ctrl_handler hdl;
|
|
|
|
enum adv7604_pad selected_input;
|
|
|
|
struct v4l2_dv_timings timings;
|
|
const struct adv7604_format_info *format;
|
|
|
|
struct {
|
|
u8 edid[256];
|
|
u32 present;
|
|
unsigned blocks;
|
|
} edid;
|
|
u16 spa_port_a[2];
|
|
struct v4l2_fract aspect_ratio;
|
|
u32 rgb_quantization_range;
|
|
struct workqueue_struct *work_queues;
|
|
struct delayed_work delayed_work_enable_hotplug;
|
|
bool restart_stdi_once;
|
|
|
|
/* i2c clients */
|
|
struct i2c_client *i2c_clients[ADV7604_PAGE_MAX];
|
|
|
|
/* controls */
|
|
struct v4l2_ctrl *detect_tx_5v_ctrl;
|
|
struct v4l2_ctrl *analog_sampling_phase_ctrl;
|
|
struct v4l2_ctrl *free_run_color_manual_ctrl;
|
|
struct v4l2_ctrl *free_run_color_ctrl;
|
|
struct v4l2_ctrl *rgb_quantization_range_ctrl;
|
|
};
|
|
|
|
static bool adv7604_has_afe(struct adv7604_state *state)
|
|
{
|
|
return state->info->has_afe;
|
|
}
|
|
|
|
/* Supported CEA and DMT timings */
|
|
static const struct v4l2_dv_timings adv7604_timings[] = {
|
|
V4L2_DV_BT_CEA_720X480P59_94,
|
|
V4L2_DV_BT_CEA_720X576P50,
|
|
V4L2_DV_BT_CEA_1280X720P24,
|
|
V4L2_DV_BT_CEA_1280X720P25,
|
|
V4L2_DV_BT_CEA_1280X720P50,
|
|
V4L2_DV_BT_CEA_1280X720P60,
|
|
V4L2_DV_BT_CEA_1920X1080P24,
|
|
V4L2_DV_BT_CEA_1920X1080P25,
|
|
V4L2_DV_BT_CEA_1920X1080P30,
|
|
V4L2_DV_BT_CEA_1920X1080P50,
|
|
V4L2_DV_BT_CEA_1920X1080P60,
|
|
|
|
/* sorted by DMT ID */
|
|
V4L2_DV_BT_DMT_640X350P85,
|
|
V4L2_DV_BT_DMT_640X400P85,
|
|
V4L2_DV_BT_DMT_720X400P85,
|
|
V4L2_DV_BT_DMT_640X480P60,
|
|
V4L2_DV_BT_DMT_640X480P72,
|
|
V4L2_DV_BT_DMT_640X480P75,
|
|
V4L2_DV_BT_DMT_640X480P85,
|
|
V4L2_DV_BT_DMT_800X600P56,
|
|
V4L2_DV_BT_DMT_800X600P60,
|
|
V4L2_DV_BT_DMT_800X600P72,
|
|
V4L2_DV_BT_DMT_800X600P75,
|
|
V4L2_DV_BT_DMT_800X600P85,
|
|
V4L2_DV_BT_DMT_848X480P60,
|
|
V4L2_DV_BT_DMT_1024X768P60,
|
|
V4L2_DV_BT_DMT_1024X768P70,
|
|
V4L2_DV_BT_DMT_1024X768P75,
|
|
V4L2_DV_BT_DMT_1024X768P85,
|
|
V4L2_DV_BT_DMT_1152X864P75,
|
|
V4L2_DV_BT_DMT_1280X768P60_RB,
|
|
V4L2_DV_BT_DMT_1280X768P60,
|
|
V4L2_DV_BT_DMT_1280X768P75,
|
|
V4L2_DV_BT_DMT_1280X768P85,
|
|
V4L2_DV_BT_DMT_1280X800P60_RB,
|
|
V4L2_DV_BT_DMT_1280X800P60,
|
|
V4L2_DV_BT_DMT_1280X800P75,
|
|
V4L2_DV_BT_DMT_1280X800P85,
|
|
V4L2_DV_BT_DMT_1280X960P60,
|
|
V4L2_DV_BT_DMT_1280X960P85,
|
|
V4L2_DV_BT_DMT_1280X1024P60,
|
|
V4L2_DV_BT_DMT_1280X1024P75,
|
|
V4L2_DV_BT_DMT_1280X1024P85,
|
|
V4L2_DV_BT_DMT_1360X768P60,
|
|
V4L2_DV_BT_DMT_1400X1050P60_RB,
|
|
V4L2_DV_BT_DMT_1400X1050P60,
|
|
V4L2_DV_BT_DMT_1400X1050P75,
|
|
V4L2_DV_BT_DMT_1400X1050P85,
|
|
V4L2_DV_BT_DMT_1440X900P60_RB,
|
|
V4L2_DV_BT_DMT_1440X900P60,
|
|
V4L2_DV_BT_DMT_1600X1200P60,
|
|
V4L2_DV_BT_DMT_1680X1050P60_RB,
|
|
V4L2_DV_BT_DMT_1680X1050P60,
|
|
V4L2_DV_BT_DMT_1792X1344P60,
|
|
V4L2_DV_BT_DMT_1856X1392P60,
|
|
V4L2_DV_BT_DMT_1920X1200P60_RB,
|
|
V4L2_DV_BT_DMT_1366X768P60_RB,
|
|
V4L2_DV_BT_DMT_1366X768P60,
|
|
V4L2_DV_BT_DMT_1920X1080P60,
|
|
{ },
|
|
};
|
|
|
|
struct adv7604_video_standards {
|
|
struct v4l2_dv_timings timings;
|
|
u8 vid_std;
|
|
u8 v_freq;
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv7604_video_standards adv7604_prim_mode_comp[] = {
|
|
/* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
|
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
|
/* TODO add 1920x1080P60_RB (CVT timing) */
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv7604_video_standards adv7604_prim_mode_gr[] = {
|
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */
|
|
/* TODO add 1600X1200P60_RB (not a DMT timing) */
|
|
{ V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = {
|
|
{ V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = {
|
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
|
{ },
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline struct adv7604_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct adv7604_state, sd);
|
|
}
|
|
|
|
static inline unsigned hblanking(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_BLANKING_WIDTH(t);
|
|
}
|
|
|
|
static inline unsigned htotal(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_FRAME_WIDTH(t);
|
|
}
|
|
|
|
static inline unsigned vblanking(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_BLANKING_HEIGHT(t);
|
|
}
|
|
|
|
static inline unsigned vtotal(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_FRAME_HEIGHT(t);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
|
|
u8 command, bool check)
|
|
{
|
|
union i2c_smbus_data data;
|
|
|
|
if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
|
|
I2C_SMBUS_READ, command,
|
|
I2C_SMBUS_BYTE_DATA, &data))
|
|
return data.byte;
|
|
if (check)
|
|
v4l_err(client, "error reading %02x, %02x\n",
|
|
client->addr, command);
|
|
return -EIO;
|
|
}
|
|
|
|
static s32 adv_smbus_read_byte_data(struct adv7604_state *state,
|
|
enum adv7604_page page, u8 command)
|
|
{
|
|
return adv_smbus_read_byte_data_check(state->i2c_clients[page],
|
|
command, true);
|
|
}
|
|
|
|
static s32 adv_smbus_write_byte_data(struct adv7604_state *state,
|
|
enum adv7604_page page, u8 command,
|
|
u8 value)
|
|
{
|
|
struct i2c_client *client = state->i2c_clients[page];
|
|
union i2c_smbus_data data;
|
|
int err;
|
|
int i;
|
|
|
|
data.byte = value;
|
|
for (i = 0; i < 3; i++) {
|
|
err = i2c_smbus_xfer(client->adapter, client->addr,
|
|
client->flags,
|
|
I2C_SMBUS_WRITE, command,
|
|
I2C_SMBUS_BYTE_DATA, &data);
|
|
if (!err)
|
|
break;
|
|
}
|
|
if (err < 0)
|
|
v4l_err(client, "error writing %02x, %02x, %02x\n",
|
|
client->addr, command, value);
|
|
return err;
|
|
}
|
|
|
|
static s32 adv_smbus_write_i2c_block_data(struct adv7604_state *state,
|
|
enum adv7604_page page, u8 command,
|
|
unsigned length, const u8 *values)
|
|
{
|
|
struct i2c_client *client = state->i2c_clients[page];
|
|
union i2c_smbus_data data;
|
|
|
|
if (length > I2C_SMBUS_BLOCK_MAX)
|
|
length = I2C_SMBUS_BLOCK_MAX;
|
|
data.block[0] = length;
|
|
memcpy(data.block + 1, values, length);
|
|
return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
|
|
I2C_SMBUS_WRITE, command,
|
|
I2C_SMBUS_I2C_BLOCK_DATA, &data);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline int io_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_IO, reg);
|
|
}
|
|
|
|
static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_IO, reg, val);
|
|
}
|
|
|
|
static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int avlink_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_AVLINK, reg);
|
|
}
|
|
|
|
static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_AVLINK, reg, val);
|
|
}
|
|
|
|
static inline int cec_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_CEC, reg);
|
|
}
|
|
|
|
static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_CEC, reg, val);
|
|
}
|
|
|
|
static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_INFOFRAME, reg);
|
|
}
|
|
|
|
static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_INFOFRAME,
|
|
reg, val);
|
|
}
|
|
|
|
static inline int esdp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_ESDP, reg);
|
|
}
|
|
|
|
static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_ESDP, reg, val);
|
|
}
|
|
|
|
static inline int dpp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_DPP, reg);
|
|
}
|
|
|
|
static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_DPP, reg, val);
|
|
}
|
|
|
|
static inline int afe_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_AFE, reg);
|
|
}
|
|
|
|
static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_AFE, reg, val);
|
|
}
|
|
|
|
static inline int rep_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_REP, reg);
|
|
}
|
|
|
|
static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_REP, reg, val);
|
|
}
|
|
|
|
static inline int rep_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return rep_write(sd, reg, (rep_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int edid_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_EDID, reg);
|
|
}
|
|
|
|
static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_EDID, reg, val);
|
|
}
|
|
|
|
static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
struct i2c_client *client = state->i2c_clients[ADV7604_PAGE_EDID];
|
|
u8 msgbuf0[1] = { 0 };
|
|
u8 msgbuf1[256];
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.len = 1,
|
|
.buf = msgbuf0
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = msgbuf1
|
|
},
|
|
};
|
|
|
|
if (i2c_transfer(client->adapter, msg, 2) < 0)
|
|
return -EIO;
|
|
memcpy(val, msgbuf1, len);
|
|
return 0;
|
|
}
|
|
|
|
static inline int edid_write_block(struct v4l2_subdev *sd,
|
|
unsigned len, const u8 *val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
int err = 0;
|
|
int i;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len);
|
|
|
|
for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
|
|
err = adv_smbus_write_i2c_block_data(state, ADV7604_PAGE_EDID,
|
|
i, I2C_SMBUS_BLOCK_MAX, val + i);
|
|
return err;
|
|
}
|
|
|
|
static void adv7604_set_hpd(struct adv7604_state *state, unsigned int hpd)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < state->info->num_dv_ports; ++i) {
|
|
if (IS_ERR(state->hpd_gpio[i]))
|
|
continue;
|
|
|
|
gpiod_set_value_cansleep(state->hpd_gpio[i], hpd & BIT(i));
|
|
}
|
|
|
|
v4l2_subdev_notify(&state->sd, ADV7604_HOTPLUG, &hpd);
|
|
}
|
|
|
|
static void adv7604_delayed_work_enable_hotplug(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct adv7604_state *state = container_of(dwork, struct adv7604_state,
|
|
delayed_work_enable_hotplug);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__);
|
|
|
|
adv7604_set_hpd(state, state->edid.present);
|
|
}
|
|
|
|
static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_HDMI, reg);
|
|
}
|
|
|
|
static u16 hdmi_read16(struct v4l2_subdev *sd, u8 reg, u16 mask)
|
|
{
|
|
return ((hdmi_read(sd, reg) << 8) | hdmi_read(sd, reg + 1)) & mask;
|
|
}
|
|
|
|
static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_HDMI, reg, val);
|
|
}
|
|
|
|
static inline int hdmi_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return hdmi_write(sd, reg, (hdmi_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int test_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_TEST, reg);
|
|
}
|
|
|
|
static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_TEST, reg, val);
|
|
}
|
|
|
|
static inline int cp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_CP, reg);
|
|
}
|
|
|
|
static u16 cp_read16(struct v4l2_subdev *sd, u8 reg, u16 mask)
|
|
{
|
|
return ((cp_read(sd, reg) << 8) | cp_read(sd, reg + 1)) & mask;
|
|
}
|
|
|
|
static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_CP, reg, val);
|
|
}
|
|
|
|
static inline int cp_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return cp_write(sd, reg, (cp_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int vdp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_read_byte_data(state, ADV7604_PAGE_VDP, reg);
|
|
}
|
|
|
|
static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return adv_smbus_write_byte_data(state, ADV7604_PAGE_VDP, reg, val);
|
|
}
|
|
|
|
#define ADV7604_REG(page, offset) (((page) << 8) | (offset))
|
|
#define ADV7604_REG_SEQ_TERM 0xffff
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int adv7604_read_reg(struct v4l2_subdev *sd, unsigned int reg)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
unsigned int page = reg >> 8;
|
|
|
|
if (!(BIT(page) & state->info->page_mask))
|
|
return -EINVAL;
|
|
|
|
reg &= 0xff;
|
|
|
|
return adv_smbus_read_byte_data(state, page, reg);
|
|
}
|
|
#endif
|
|
|
|
static int adv7604_write_reg(struct v4l2_subdev *sd, unsigned int reg, u8 val)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
unsigned int page = reg >> 8;
|
|
|
|
if (!(BIT(page) & state->info->page_mask))
|
|
return -EINVAL;
|
|
|
|
reg &= 0xff;
|
|
|
|
return adv_smbus_write_byte_data(state, page, reg, val);
|
|
}
|
|
|
|
static void adv7604_write_reg_seq(struct v4l2_subdev *sd,
|
|
const struct adv7604_reg_seq *reg_seq)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; reg_seq[i].reg != ADV7604_REG_SEQ_TERM; i++)
|
|
adv7604_write_reg(sd, reg_seq[i].reg, reg_seq[i].val);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Format helpers
|
|
*/
|
|
|
|
static const struct adv7604_format_info adv7604_formats[] = {
|
|
{ V4L2_MBUS_FMT_RGB888_1X24, ADV7604_OP_CH_SEL_RGB, true, false,
|
|
ADV7604_OP_MODE_SEL_SDR_444 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV8_2X8, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YVYU8_2X8, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV10_2X10, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_YVYU10_2X10, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_YUYV12_2X12, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YVYU12_2X12, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_UYVY8_1X16, ADV7604_OP_CH_SEL_RBG, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_VYUY8_1X16, ADV7604_OP_CH_SEL_RBG, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV8_1X16, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YVYU8_1X16, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_UYVY10_1X20, ADV7604_OP_CH_SEL_RBG, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_VYUY10_1X20, ADV7604_OP_CH_SEL_RBG, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_YUYV10_1X20, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_YVYU10_1X20, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ V4L2_MBUS_FMT_UYVY12_1X24, ADV7604_OP_CH_SEL_RBG, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_VYUY12_1X24, ADV7604_OP_CH_SEL_RBG, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YUYV12_1X24, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YVYU12_1X24, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
};
|
|
|
|
static const struct adv7604_format_info adv7611_formats[] = {
|
|
{ V4L2_MBUS_FMT_RGB888_1X24, ADV7604_OP_CH_SEL_RGB, true, false,
|
|
ADV7604_OP_MODE_SEL_SDR_444 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV8_2X8, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YVYU8_2X8, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV12_2X12, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YVYU12_2X12, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_UYVY8_1X16, ADV7604_OP_CH_SEL_RBG, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_VYUY8_1X16, ADV7604_OP_CH_SEL_RBG, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YUYV8_1X16, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_YVYU8_1X16, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_8BIT },
|
|
{ V4L2_MBUS_FMT_UYVY12_1X24, ADV7604_OP_CH_SEL_RBG, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_VYUY12_1X24, ADV7604_OP_CH_SEL_RBG, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YUYV12_1X24, ADV7604_OP_CH_SEL_RGB, false, false,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
{ V4L2_MBUS_FMT_YVYU12_1X24, ADV7604_OP_CH_SEL_RGB, false, true,
|
|
ADV7604_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_12BIT },
|
|
};
|
|
|
|
static const struct adv7604_format_info *
|
|
adv7604_format_info(struct adv7604_state *state, enum v4l2_mbus_pixelcode code)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < state->info->nformats; ++i) {
|
|
if (state->info->formats[i].code == code)
|
|
return &state->info->formats[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline bool is_analog_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return state->selected_input == ADV7604_PAD_VGA_RGB ||
|
|
state->selected_input == ADV7604_PAD_VGA_COMP;
|
|
}
|
|
|
|
static inline bool is_digital_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return state->selected_input == ADV7604_PAD_HDMI_PORT_A ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_B ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_C ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_D;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static void adv7604_inv_register(struct v4l2_subdev *sd)
|
|
{
|
|
v4l2_info(sd, "0x000-0x0ff: IO Map\n");
|
|
v4l2_info(sd, "0x100-0x1ff: AVLink Map\n");
|
|
v4l2_info(sd, "0x200-0x2ff: CEC Map\n");
|
|
v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n");
|
|
v4l2_info(sd, "0x400-0x4ff: ESDP Map\n");
|
|
v4l2_info(sd, "0x500-0x5ff: DPP Map\n");
|
|
v4l2_info(sd, "0x600-0x6ff: AFE Map\n");
|
|
v4l2_info(sd, "0x700-0x7ff: Repeater Map\n");
|
|
v4l2_info(sd, "0x800-0x8ff: EDID Map\n");
|
|
v4l2_info(sd, "0x900-0x9ff: HDMI Map\n");
|
|
v4l2_info(sd, "0xa00-0xaff: Test Map\n");
|
|
v4l2_info(sd, "0xb00-0xbff: CP Map\n");
|
|
v4l2_info(sd, "0xc00-0xcff: VDP Map\n");
|
|
}
|
|
|
|
static int adv7604_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = adv7604_read_reg(sd, reg->reg);
|
|
if (ret < 0) {
|
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
|
adv7604_inv_register(sd);
|
|
return ret;
|
|
}
|
|
|
|
reg->size = 1;
|
|
reg->val = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = adv7604_write_reg(sd, reg->reg, reg->val);
|
|
if (ret < 0) {
|
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
|
adv7604_inv_register(sd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static unsigned int adv7604_read_cable_det(struct v4l2_subdev *sd)
|
|
{
|
|
u8 value = io_read(sd, 0x6f);
|
|
|
|
return ((value & 0x10) >> 4)
|
|
| ((value & 0x08) >> 2)
|
|
| ((value & 0x04) << 0)
|
|
| ((value & 0x02) << 2);
|
|
}
|
|
|
|
static unsigned int adv7611_read_cable_det(struct v4l2_subdev *sd)
|
|
{
|
|
u8 value = io_read(sd, 0x6f);
|
|
|
|
return value & 1;
|
|
}
|
|
|
|
static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
|
|
return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
|
|
info->read_cable_det(sd));
|
|
}
|
|
|
|
static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
|
|
u8 prim_mode,
|
|
const struct adv7604_video_standards *predef_vid_timings,
|
|
const struct v4l2_dv_timings *timings)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; predef_vid_timings[i].timings.bt.width; i++) {
|
|
if (!v4l2_match_dv_timings(timings, &predef_vid_timings[i].timings,
|
|
is_digital_input(sd) ? 250000 : 1000000))
|
|
continue;
|
|
io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */
|
|
io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) +
|
|
prim_mode); /* v_freq and prim mode */
|
|
return 0;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int configure_predefined_video_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
int err;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s", __func__);
|
|
|
|
if (adv7604_has_afe(state)) {
|
|
/* reset to default values */
|
|
io_write(sd, 0x16, 0x43);
|
|
io_write(sd, 0x17, 0x5a);
|
|
}
|
|
/* disable embedded syncs for auto graphics mode */
|
|
cp_write_clr_set(sd, 0x81, 0x10, 0x00);
|
|
cp_write(sd, 0x8f, 0x00);
|
|
cp_write(sd, 0x90, 0x00);
|
|
cp_write(sd, 0xa2, 0x00);
|
|
cp_write(sd, 0xa3, 0x00);
|
|
cp_write(sd, 0xa4, 0x00);
|
|
cp_write(sd, 0xa5, 0x00);
|
|
cp_write(sd, 0xa6, 0x00);
|
|
cp_write(sd, 0xa7, 0x00);
|
|
cp_write(sd, 0xab, 0x00);
|
|
cp_write(sd, 0xac, 0x00);
|
|
|
|
if (is_analog_input(sd)) {
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x01, adv7604_prim_mode_comp, timings);
|
|
if (err)
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x02, adv7604_prim_mode_gr, timings);
|
|
} else if (is_digital_input(sd)) {
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x05, adv7604_prim_mode_hdmi_comp, timings);
|
|
if (err)
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x06, adv7604_prim_mode_hdmi_gr, timings);
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
err = -1;
|
|
}
|
|
|
|
|
|
return err;
|
|
}
|
|
|
|
static void configure_custom_video_timings(struct v4l2_subdev *sd,
|
|
const struct v4l2_bt_timings *bt)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
u32 width = htotal(bt);
|
|
u32 height = vtotal(bt);
|
|
u16 cp_start_sav = bt->hsync + bt->hbackporch - 4;
|
|
u16 cp_start_eav = width - bt->hfrontporch;
|
|
u16 cp_start_vbi = height - bt->vfrontporch;
|
|
u16 cp_end_vbi = bt->vsync + bt->vbackporch;
|
|
u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ?
|
|
((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0;
|
|
const u8 pll[2] = {
|
|
0xc0 | ((width >> 8) & 0x1f),
|
|
width & 0xff
|
|
};
|
|
|
|
v4l2_dbg(2, debug, sd, "%s\n", __func__);
|
|
|
|
if (is_analog_input(sd)) {
|
|
/* auto graphics */
|
|
io_write(sd, 0x00, 0x07); /* video std */
|
|
io_write(sd, 0x01, 0x02); /* prim mode */
|
|
/* enable embedded syncs for auto graphics mode */
|
|
cp_write_clr_set(sd, 0x81, 0x10, 0x10);
|
|
|
|
/* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
|
|
/* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
|
|
/* IO-map reg. 0x16 and 0x17 should be written in sequence */
|
|
if (adv_smbus_write_i2c_block_data(state, ADV7604_PAGE_IO,
|
|
0x16, 2, pll))
|
|
v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n");
|
|
|
|
/* active video - horizontal timing */
|
|
cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff);
|
|
cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) |
|
|
((cp_start_eav >> 8) & 0x0f));
|
|
cp_write(sd, 0xa4, cp_start_eav & 0xff);
|
|
|
|
/* active video - vertical timing */
|
|
cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff);
|
|
cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) |
|
|
((cp_end_vbi >> 8) & 0xf));
|
|
cp_write(sd, 0xa7, cp_end_vbi & 0xff);
|
|
} else if (is_digital_input(sd)) {
|
|
/* set default prim_mode/vid_std for HDMI
|
|
according to [REF_03, c. 4.2] */
|
|
io_write(sd, 0x00, 0x02); /* video std */
|
|
io_write(sd, 0x01, 0x06); /* prim mode */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
|
|
cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);
|
|
cp_write(sd, 0x90, ch1_fr_ll & 0xff);
|
|
cp_write(sd, 0xab, (height >> 4) & 0xff);
|
|
cp_write(sd, 0xac, (height & 0x0f) << 4);
|
|
}
|
|
|
|
static void adv7604_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
u8 offset_buf[4];
|
|
|
|
if (auto_offset) {
|
|
offset_a = 0x3ff;
|
|
offset_b = 0x3ff;
|
|
offset_c = 0x3ff;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
|
__func__, auto_offset ? "Auto" : "Manual",
|
|
offset_a, offset_b, offset_c);
|
|
|
|
offset_buf[0] = (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
|
|
offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
|
|
offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
|
|
offset_buf[3] = offset_c & 0x0ff;
|
|
|
|
/* Registers must be written in this order with no i2c access in between */
|
|
if (adv_smbus_write_i2c_block_data(state, ADV7604_PAGE_CP,
|
|
0x77, 4, offset_buf))
|
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
|
|
}
|
|
|
|
static void adv7604_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
u8 gain_buf[4];
|
|
u8 gain_man = 1;
|
|
u8 agc_mode_man = 1;
|
|
|
|
if (auto_gain) {
|
|
gain_man = 0;
|
|
agc_mode_man = 0;
|
|
gain_a = 0x100;
|
|
gain_b = 0x100;
|
|
gain_c = 0x100;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
|
__func__, auto_gain ? "Auto" : "Manual",
|
|
gain_a, gain_b, gain_c);
|
|
|
|
gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
|
|
gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
|
|
gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
|
|
gain_buf[3] = ((gain_c & 0x0ff));
|
|
|
|
/* Registers must be written in this order with no i2c access in between */
|
|
if (adv_smbus_write_i2c_block_data(state, ADV7604_PAGE_CP,
|
|
0x73, 4, gain_buf))
|
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
|
|
}
|
|
|
|
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
bool rgb_output = io_read(sd, 0x02) & 0x02;
|
|
bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
|
|
__func__, state->rgb_quantization_range,
|
|
rgb_output, hdmi_signal);
|
|
|
|
adv7604_set_gain(sd, true, 0x0, 0x0, 0x0);
|
|
adv7604_set_offset(sd, true, 0x0, 0x0, 0x0);
|
|
|
|
switch (state->rgb_quantization_range) {
|
|
case V4L2_DV_RGB_RANGE_AUTO:
|
|
if (state->selected_input == ADV7604_PAD_VGA_RGB) {
|
|
/* Receiving analog RGB signal
|
|
* Set RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
break;
|
|
}
|
|
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* Receiving analog YPbPr signal
|
|
* Set automode */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0xf0);
|
|
break;
|
|
}
|
|
|
|
if (hdmi_signal) {
|
|
/* Receiving HDMI signal
|
|
* Set automode */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0xf0);
|
|
break;
|
|
}
|
|
|
|
/* Receiving DVI-D signal
|
|
* ADV7604 selects RGB limited range regardless of
|
|
* input format (CE/IT) in automatic mode */
|
|
if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
|
|
/* RGB limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x00);
|
|
} else {
|
|
/* RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
|
|
if (is_digital_input(sd) && rgb_output) {
|
|
adv7604_set_offset(sd, false, 0x40, 0x40, 0x40);
|
|
} else {
|
|
adv7604_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
|
adv7604_set_offset(sd, false, 0x70, 0x70, 0x70);
|
|
}
|
|
}
|
|
break;
|
|
case V4L2_DV_RGB_RANGE_LIMITED:
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* YCrCb limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x20);
|
|
break;
|
|
}
|
|
|
|
/* RGB limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x00);
|
|
|
|
break;
|
|
case V4L2_DV_RGB_RANGE_FULL:
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* YCrCb full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x60);
|
|
break;
|
|
}
|
|
|
|
/* RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
|
|
if (is_analog_input(sd) || hdmi_signal)
|
|
break;
|
|
|
|
/* Adjust gain/offset for DVI-D signals only */
|
|
if (rgb_output) {
|
|
adv7604_set_offset(sd, false, 0x40, 0x40, 0x40);
|
|
} else {
|
|
adv7604_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
|
adv7604_set_offset(sd, false, 0x70, 0x70, 0x70);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd =
|
|
&container_of(ctrl->handler, struct adv7604_state, hdl)->sd;
|
|
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
cp_write(sd, 0x3c, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_CONTRAST:
|
|
cp_write(sd, 0x3a, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_SATURATION:
|
|
cp_write(sd, 0x3b, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_HUE:
|
|
cp_write(sd, 0x3d, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_DV_RX_RGB_RANGE:
|
|
state->rgb_quantization_range = ctrl->val;
|
|
set_rgb_quantization_range(sd);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE:
|
|
if (!adv7604_has_afe(state))
|
|
return -EINVAL;
|
|
/* Set the analog sampling phase. This is needed to find the
|
|
best sampling phase for analog video: an application or
|
|
driver has to try a number of phases and analyze the picture
|
|
quality before settling on the best performing phase. */
|
|
afe_write(sd, 0xc8, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL:
|
|
/* Use the default blue color for free running mode,
|
|
or supply your own. */
|
|
cp_write_clr_set(sd, 0xbf, 0x04, ctrl->val << 2);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR:
|
|
cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16);
|
|
cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8);
|
|
cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff));
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline bool no_power(struct v4l2_subdev *sd)
|
|
{
|
|
/* Entire chip or CP powered off */
|
|
return io_read(sd, 0x0c) & 0x24;
|
|
}
|
|
|
|
static inline bool no_signal_tmds(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
return !(io_read(sd, 0x6a) & (0x10 >> state->selected_input));
|
|
}
|
|
|
|
static inline bool no_lock_tmds(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
|
|
return (io_read(sd, 0x6a) & info->tdms_lock_mask) != info->tdms_lock_mask;
|
|
}
|
|
|
|
static inline bool is_hdmi(struct v4l2_subdev *sd)
|
|
{
|
|
return hdmi_read(sd, 0x05) & 0x80;
|
|
}
|
|
|
|
static inline bool no_lock_sspd(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
/*
|
|
* Chips without a AFE don't expose registers for the SSPD, so just assume
|
|
* that we have a lock.
|
|
*/
|
|
if (adv7604_has_afe(state))
|
|
return false;
|
|
|
|
/* TODO channel 2 */
|
|
return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0);
|
|
}
|
|
|
|
static inline bool no_lock_stdi(struct v4l2_subdev *sd)
|
|
{
|
|
/* TODO channel 2 */
|
|
return !(cp_read(sd, 0xb1) & 0x80);
|
|
}
|
|
|
|
static inline bool no_signal(struct v4l2_subdev *sd)
|
|
{
|
|
bool ret;
|
|
|
|
ret = no_power(sd);
|
|
|
|
ret |= no_lock_stdi(sd);
|
|
ret |= no_lock_sspd(sd);
|
|
|
|
if (is_digital_input(sd)) {
|
|
ret |= no_lock_tmds(sd);
|
|
ret |= no_signal_tmds(sd);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline bool no_lock_cp(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (!adv7604_has_afe(state))
|
|
return false;
|
|
|
|
/* CP has detected a non standard number of lines on the incoming
|
|
video compared to what it is configured to receive by s_dv_timings */
|
|
return io_read(sd, 0x12) & 0x01;
|
|
}
|
|
|
|
static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
*status = 0;
|
|
*status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0;
|
|
*status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0;
|
|
if (no_lock_cp(sd))
|
|
*status |= is_digital_input(sd) ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
struct stdi_readback {
|
|
u16 bl, lcf, lcvs;
|
|
u8 hs_pol, vs_pol;
|
|
bool interlaced;
|
|
};
|
|
|
|
static int stdi2dv_timings(struct v4l2_subdev *sd,
|
|
struct stdi_readback *stdi,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
u32 hfreq = (ADV7604_fsc * 8) / stdi->bl;
|
|
u32 pix_clk;
|
|
int i;
|
|
|
|
for (i = 0; adv7604_timings[i].bt.height; i++) {
|
|
if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1)
|
|
continue;
|
|
if (adv7604_timings[i].bt.vsync != stdi->lcvs)
|
|
continue;
|
|
|
|
pix_clk = hfreq * htotal(&adv7604_timings[i].bt);
|
|
|
|
if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) &&
|
|
(pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) {
|
|
*timings = adv7604_timings[i];
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs,
|
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
|
timings))
|
|
return 0;
|
|
if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs,
|
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
|
state->aspect_ratio, timings))
|
|
return 0;
|
|
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
|
|
__func__, stdi->lcvs, stdi->lcf, stdi->bl,
|
|
stdi->hs_pol, stdi->vs_pol);
|
|
return -1;
|
|
}
|
|
|
|
|
|
static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
u8 polarity;
|
|
|
|
if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
|
|
v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* read STDI */
|
|
stdi->bl = cp_read16(sd, 0xb1, 0x3fff);
|
|
stdi->lcf = cp_read16(sd, info->lcf_reg, 0x7ff);
|
|
stdi->lcvs = cp_read(sd, 0xb3) >> 3;
|
|
stdi->interlaced = io_read(sd, 0x12) & 0x10;
|
|
|
|
if (adv7604_has_afe(state)) {
|
|
/* read SSPD */
|
|
polarity = cp_read(sd, 0xb5);
|
|
if ((polarity & 0x03) == 0x01) {
|
|
stdi->hs_pol = polarity & 0x10
|
|
? (polarity & 0x08 ? '+' : '-') : 'x';
|
|
stdi->vs_pol = polarity & 0x40
|
|
? (polarity & 0x20 ? '+' : '-') : 'x';
|
|
} else {
|
|
stdi->hs_pol = 'x';
|
|
stdi->vs_pol = 'x';
|
|
}
|
|
} else {
|
|
polarity = hdmi_read(sd, 0x05);
|
|
stdi->hs_pol = polarity & 0x20 ? '+' : '-';
|
|
stdi->vs_pol = polarity & 0x10 ? '+' : '-';
|
|
}
|
|
|
|
if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: signal lost during readout of STDI/SSPD\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) {
|
|
v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__);
|
|
memset(stdi, 0, sizeof(struct stdi_readback));
|
|
return -1;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n",
|
|
__func__, stdi->lcf, stdi->bl, stdi->lcvs,
|
|
stdi->hs_pol, stdi->vs_pol,
|
|
stdi->interlaced ? "interlaced" : "progressive");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_enum_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_enum_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1)
|
|
return -EINVAL;
|
|
|
|
if (timings->pad >= state->source_pad)
|
|
return -EINVAL;
|
|
|
|
memset(timings->reserved, 0, sizeof(timings->reserved));
|
|
timings->timings = adv7604_timings[timings->index];
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_dv_timings_cap(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings_cap *cap)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (cap->pad >= state->source_pad)
|
|
return -EINVAL;
|
|
|
|
cap->type = V4L2_DV_BT_656_1120;
|
|
cap->bt.max_width = 1920;
|
|
cap->bt.max_height = 1200;
|
|
cap->bt.min_pixelclock = 25000000;
|
|
|
|
switch (cap->pad) {
|
|
case ADV7604_PAD_HDMI_PORT_A:
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
cap->bt.max_pixelclock = 225000000;
|
|
break;
|
|
case ADV7604_PAD_VGA_RGB:
|
|
case ADV7604_PAD_VGA_COMP:
|
|
default:
|
|
cap->bt.max_pixelclock = 170000000;
|
|
break;
|
|
}
|
|
|
|
cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT;
|
|
cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
|
|
V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM;
|
|
return 0;
|
|
}
|
|
|
|
/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
|
|
if the format is listed in adv7604_timings[] */
|
|
static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; adv7604_timings[i].bt.width; i++) {
|
|
if (v4l2_match_dv_timings(timings, &adv7604_timings[i],
|
|
is_digital_input(sd) ? 250000 : 1000000)) {
|
|
*timings = adv7604_timings[i];
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static unsigned int adv7604_read_hdmi_pixelclock(struct v4l2_subdev *sd)
|
|
{
|
|
unsigned int freq;
|
|
int a, b;
|
|
|
|
a = hdmi_read(sd, 0x06);
|
|
b = hdmi_read(sd, 0x3b);
|
|
if (a < 0 || b < 0)
|
|
return 0;
|
|
freq = a * 1000000 + ((b & 0x30) >> 4) * 250000;
|
|
|
|
if (is_hdmi(sd)) {
|
|
/* adjust for deep color mode */
|
|
unsigned bits_per_channel = ((hdmi_read(sd, 0x0b) & 0x60) >> 4) + 8;
|
|
|
|
freq = freq * 8 / bits_per_channel;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
static unsigned int adv7611_read_hdmi_pixelclock(struct v4l2_subdev *sd)
|
|
{
|
|
int a, b;
|
|
|
|
a = hdmi_read(sd, 0x51);
|
|
b = hdmi_read(sd, 0x52);
|
|
if (a < 0 || b < 0)
|
|
return 0;
|
|
return ((a << 1) | (b >> 7)) * 1000000 + (b & 0x7f) * 1000000 / 128;
|
|
}
|
|
|
|
static int adv7604_query_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
struct v4l2_bt_timings *bt = &timings->bt;
|
|
struct stdi_readback stdi;
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
|
|
if (no_signal(sd)) {
|
|
state->restart_stdi_once = true;
|
|
v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
|
|
return -ENOLINK;
|
|
}
|
|
|
|
/* read STDI */
|
|
if (read_stdi(sd, &stdi)) {
|
|
v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__);
|
|
return -ENOLINK;
|
|
}
|
|
bt->interlaced = stdi.interlaced ?
|
|
V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE;
|
|
|
|
if (is_digital_input(sd)) {
|
|
timings->type = V4L2_DV_BT_656_1120;
|
|
|
|
/* FIXME: All masks are incorrect for ADV7611 */
|
|
bt->width = hdmi_read16(sd, 0x07, 0xfff);
|
|
bt->height = hdmi_read16(sd, 0x09, 0xfff);
|
|
bt->pixelclock = info->read_hdmi_pixelclock(sd);
|
|
bt->hfrontporch = hdmi_read16(sd, 0x20, 0x3ff);
|
|
bt->hsync = hdmi_read16(sd, 0x22, 0x3ff);
|
|
bt->hbackporch = hdmi_read16(sd, 0x24, 0x3ff);
|
|
bt->vfrontporch = hdmi_read16(sd, 0x2a, 0x1fff) / 2;
|
|
bt->vsync = hdmi_read16(sd, 0x2e, 0x1fff) / 2;
|
|
bt->vbackporch = hdmi_read16(sd, 0x32, 0x1fff) / 2;
|
|
bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) |
|
|
((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0);
|
|
if (bt->interlaced == V4L2_DV_INTERLACED) {
|
|
bt->height += hdmi_read16(sd, 0x0b, 0xfff);
|
|
bt->il_vfrontporch = hdmi_read16(sd, 0x2c, 0x1fff) / 2;
|
|
bt->il_vsync = hdmi_read16(sd, 0x30, 0x1fff) / 2;
|
|
bt->il_vbackporch = hdmi_read16(sd, 0x34, 0x1fff) / 2;
|
|
}
|
|
adv7604_fill_optional_dv_timings_fields(sd, timings);
|
|
} else {
|
|
/* find format
|
|
* Since LCVS values are inaccurate [REF_03, p. 275-276],
|
|
* stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
|
|
*/
|
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
|
goto found;
|
|
stdi.lcvs += 1;
|
|
v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs);
|
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
|
goto found;
|
|
stdi.lcvs -= 2;
|
|
v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs);
|
|
if (stdi2dv_timings(sd, &stdi, timings)) {
|
|
/*
|
|
* The STDI block may measure wrong values, especially
|
|
* for lcvs and lcf. If the driver can not find any
|
|
* valid timing, the STDI block is restarted to measure
|
|
* the video timings again. The function will return an
|
|
* error, but the restart of STDI will generate a new
|
|
* STDI interrupt and the format detection process will
|
|
* restart.
|
|
*/
|
|
if (state->restart_stdi_once) {
|
|
v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__);
|
|
/* TODO restart STDI for Sync Channel 2 */
|
|
/* enter one-shot mode */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x00);
|
|
/* trigger STDI restart */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x04);
|
|
/* reset to continuous mode */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x02);
|
|
state->restart_stdi_once = false;
|
|
return -ENOLINK;
|
|
}
|
|
v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__);
|
|
return -ERANGE;
|
|
}
|
|
state->restart_stdi_once = true;
|
|
}
|
|
found:
|
|
|
|
if (no_signal(sd)) {
|
|
v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__);
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
return -ENOLINK;
|
|
}
|
|
|
|
if ((is_analog_input(sd) && bt->pixelclock > 170000000) ||
|
|
(is_digital_input(sd) && bt->pixelclock > 225000000)) {
|
|
v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n",
|
|
__func__, (u32)bt->pixelclock);
|
|
return -ERANGE;
|
|
}
|
|
|
|
if (debug > 1)
|
|
v4l2_print_dv_timings(sd->name, "adv7604_query_dv_timings: ",
|
|
timings, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
struct v4l2_bt_timings *bt;
|
|
int err;
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
if (v4l2_match_dv_timings(&state->timings, timings, 0)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
bt = &timings->bt;
|
|
|
|
if ((is_analog_input(sd) && bt->pixelclock > 170000000) ||
|
|
(is_digital_input(sd) && bt->pixelclock > 225000000)) {
|
|
v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n",
|
|
__func__, (u32)bt->pixelclock);
|
|
return -ERANGE;
|
|
}
|
|
|
|
adv7604_fill_optional_dv_timings_fields(sd, timings);
|
|
|
|
state->timings = *timings;
|
|
|
|
cp_write_clr_set(sd, 0x91, 0x40, bt->interlaced ? 0x40 : 0x00);
|
|
|
|
/* Use prim_mode and vid_std when available */
|
|
err = configure_predefined_video_timings(sd, timings);
|
|
if (err) {
|
|
/* custom settings when the video format
|
|
does not have prim_mode/vid_std */
|
|
configure_custom_video_timings(sd, bt);
|
|
}
|
|
|
|
set_rgb_quantization_range(sd);
|
|
|
|
if (debug > 1)
|
|
v4l2_print_dv_timings(sd->name, "adv7604_s_dv_timings: ",
|
|
timings, true);
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_g_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
*timings = state->timings;
|
|
return 0;
|
|
}
|
|
|
|
static void adv7604_set_termination(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
hdmi_write(sd, 0x01, enable ? 0x00 : 0x78);
|
|
}
|
|
|
|
static void adv7611_set_termination(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
hdmi_write(sd, 0x83, enable ? 0xfe : 0xff);
|
|
}
|
|
|
|
static void enable_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (is_analog_input(sd)) {
|
|
io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */
|
|
} else if (is_digital_input(sd)) {
|
|
hdmi_write_clr_set(sd, 0x00, 0x03, state->selected_input);
|
|
state->info->set_termination(sd, true);
|
|
io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */
|
|
hdmi_write_clr_set(sd, 0x1a, 0x10, 0x00); /* Unmute audio */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
}
|
|
|
|
static void disable_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
hdmi_write_clr_set(sd, 0x1a, 0x10, 0x10); /* Mute audio */
|
|
msleep(16); /* 512 samples with >= 32 kHz sample rate [REF_03, c. 7.16.10] */
|
|
io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */
|
|
state->info->set_termination(sd, false);
|
|
}
|
|
|
|
static void select_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
|
|
if (is_analog_input(sd)) {
|
|
adv7604_write_reg_seq(sd, info->recommended_settings[0]);
|
|
|
|
afe_write(sd, 0x00, 0x08); /* power up ADC */
|
|
afe_write(sd, 0x01, 0x06); /* power up Analog Front End */
|
|
afe_write(sd, 0xc8, 0x00); /* phase control */
|
|
} else if (is_digital_input(sd)) {
|
|
hdmi_write(sd, 0x00, state->selected_input & 0x03);
|
|
|
|
adv7604_write_reg_seq(sd, info->recommended_settings[1]);
|
|
|
|
if (adv7604_has_afe(state)) {
|
|
afe_write(sd, 0x00, 0xff); /* power down ADC */
|
|
afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */
|
|
afe_write(sd, 0xc8, 0x40); /* phase control */
|
|
}
|
|
|
|
cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
|
|
cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */
|
|
cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
}
|
|
|
|
static int adv7604_s_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: input %d, selected input %d",
|
|
__func__, input, state->selected_input);
|
|
|
|
if (input == state->selected_input)
|
|
return 0;
|
|
|
|
if (input > state->info->max_port)
|
|
return -EINVAL;
|
|
|
|
state->selected_input = input;
|
|
|
|
disable_input(sd);
|
|
|
|
select_input(sd);
|
|
|
|
enable_input(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_fh *fh,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (code->index >= state->info->nformats)
|
|
return -EINVAL;
|
|
|
|
code->code = state->info->formats[code->index].code;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void adv7604_fill_format(struct adv7604_state *state,
|
|
struct v4l2_mbus_framefmt *format)
|
|
{
|
|
memset(format, 0, sizeof(*format));
|
|
|
|
format->width = state->timings.bt.width;
|
|
format->height = state->timings.bt.height;
|
|
format->field = V4L2_FIELD_NONE;
|
|
|
|
if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861)
|
|
format->colorspace = (state->timings.bt.height <= 576) ?
|
|
V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709;
|
|
}
|
|
|
|
/*
|
|
* Compute the op_ch_sel value required to obtain on the bus the component order
|
|
* corresponding to the selected format taking into account bus reordering
|
|
* applied by the board at the output of the device.
|
|
*
|
|
* The following table gives the op_ch_value from the format component order
|
|
* (expressed as op_ch_sel value in column) and the bus reordering (expressed as
|
|
* adv7604_bus_order value in row).
|
|
*
|
|
* | GBR(0) GRB(1) BGR(2) RGB(3) BRG(4) RBG(5)
|
|
* ----------+-------------------------------------------------
|
|
* RGB (NOP) | GBR GRB BGR RGB BRG RBG
|
|
* GRB (1-2) | BGR RGB GBR GRB RBG BRG
|
|
* RBG (2-3) | GRB GBR BRG RBG BGR RGB
|
|
* BGR (1-3) | RBG BRG RGB BGR GRB GBR
|
|
* BRG (ROR) | BRG RBG GRB GBR RGB BGR
|
|
* GBR (ROL) | RGB BGR RBG BRG GBR GRB
|
|
*/
|
|
static unsigned int adv7604_op_ch_sel(struct adv7604_state *state)
|
|
{
|
|
#define _SEL(a,b,c,d,e,f) { \
|
|
ADV7604_OP_CH_SEL_##a, ADV7604_OP_CH_SEL_##b, ADV7604_OP_CH_SEL_##c, \
|
|
ADV7604_OP_CH_SEL_##d, ADV7604_OP_CH_SEL_##e, ADV7604_OP_CH_SEL_##f }
|
|
#define _BUS(x) [ADV7604_BUS_ORDER_##x]
|
|
|
|
static const unsigned int op_ch_sel[6][6] = {
|
|
_BUS(RGB) /* NOP */ = _SEL(GBR, GRB, BGR, RGB, BRG, RBG),
|
|
_BUS(GRB) /* 1-2 */ = _SEL(BGR, RGB, GBR, GRB, RBG, BRG),
|
|
_BUS(RBG) /* 2-3 */ = _SEL(GRB, GBR, BRG, RBG, BGR, RGB),
|
|
_BUS(BGR) /* 1-3 */ = _SEL(RBG, BRG, RGB, BGR, GRB, GBR),
|
|
_BUS(BRG) /* ROR */ = _SEL(BRG, RBG, GRB, GBR, RGB, BGR),
|
|
_BUS(GBR) /* ROL */ = _SEL(RGB, BGR, RBG, BRG, GBR, GRB),
|
|
};
|
|
|
|
return op_ch_sel[state->pdata.bus_order][state->format->op_ch_sel >> 5];
|
|
}
|
|
|
|
static void adv7604_setup_format(struct adv7604_state *state)
|
|
{
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
io_write_clr_set(sd, 0x02, 0x02,
|
|
state->format->rgb_out ? ADV7604_RGB_OUT : 0);
|
|
io_write(sd, 0x03, state->format->op_format_sel |
|
|
state->pdata.op_format_mode_sel);
|
|
io_write_clr_set(sd, 0x04, 0xe0, adv7604_op_ch_sel(state));
|
|
io_write_clr_set(sd, 0x05, 0x01,
|
|
state->format->swap_cb_cr ? ADV7604_OP_SWAP_CB_CR : 0);
|
|
}
|
|
|
|
static int adv7604_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
if (format->pad != state->source_pad)
|
|
return -EINVAL;
|
|
|
|
adv7604_fill_format(state, &format->format);
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
fmt = v4l2_subdev_get_try_format(fh, format->pad);
|
|
format->format.code = fmt->code;
|
|
} else {
|
|
format->format.code = state->format->code;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_format_info *info;
|
|
|
|
if (format->pad != state->source_pad)
|
|
return -EINVAL;
|
|
|
|
info = adv7604_format_info(state, format->format.code);
|
|
if (info == NULL)
|
|
info = adv7604_format_info(state, V4L2_MBUS_FMT_YUYV8_2X8);
|
|
|
|
adv7604_fill_format(state, &format->format);
|
|
format->format.code = info->code;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
fmt = v4l2_subdev_get_try_format(fh, format->pad);
|
|
fmt->code = format->format.code;
|
|
} else {
|
|
state->format = info;
|
|
adv7604_setup_format(state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
const u8 irq_reg_0x43 = io_read(sd, 0x43);
|
|
const u8 irq_reg_0x6b = io_read(sd, 0x6b);
|
|
const u8 irq_reg_0x70 = io_read(sd, 0x70);
|
|
u8 fmt_change_digital;
|
|
u8 fmt_change;
|
|
u8 tx_5v;
|
|
|
|
if (irq_reg_0x43)
|
|
io_write(sd, 0x44, irq_reg_0x43);
|
|
if (irq_reg_0x70)
|
|
io_write(sd, 0x71, irq_reg_0x70);
|
|
if (irq_reg_0x6b)
|
|
io_write(sd, 0x6c, irq_reg_0x6b);
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: ", __func__);
|
|
|
|
/* format change */
|
|
fmt_change = irq_reg_0x43 & 0x98;
|
|
fmt_change_digital = is_digital_input(sd)
|
|
? irq_reg_0x6b & info->fmt_change_digital_mask
|
|
: 0;
|
|
|
|
if (fmt_change || fmt_change_digital) {
|
|
v4l2_dbg(1, debug, sd,
|
|
"%s: fmt_change = 0x%x, fmt_change_digital = 0x%x\n",
|
|
__func__, fmt_change, fmt_change_digital);
|
|
|
|
v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL);
|
|
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
/* HDMI/DVI mode */
|
|
if (irq_reg_0x6b & 0x01) {
|
|
v4l2_dbg(1, debug, sd, "%s: irq %s mode\n", __func__,
|
|
(io_read(sd, 0x6a) & 0x01) ? "HDMI" : "DVI");
|
|
set_rgb_quantization_range(sd);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
/* tx 5v detect */
|
|
tx_5v = io_read(sd, 0x70) & info->cable_det_mask;
|
|
if (tx_5v) {
|
|
v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v);
|
|
io_write(sd, 0x71, tx_5v);
|
|
adv7604_s_detect_tx_5v_ctrl(sd);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
u8 *data = NULL;
|
|
|
|
if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
|
|
return -EINVAL;
|
|
if (edid->blocks == 0)
|
|
return -EINVAL;
|
|
if (edid->blocks > 2)
|
|
return -EINVAL;
|
|
if (edid->start_block > 1)
|
|
return -EINVAL;
|
|
if (edid->start_block == 1)
|
|
edid->blocks = 1;
|
|
|
|
if (edid->blocks > state->edid.blocks)
|
|
edid->blocks = state->edid.blocks;
|
|
|
|
switch (edid->pad) {
|
|
case ADV7604_PAD_HDMI_PORT_A:
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
if (state->edid.present & (1 << edid->pad))
|
|
data = state->edid.edid;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
if (!data)
|
|
return -ENODATA;
|
|
|
|
memcpy(edid->edid,
|
|
data + edid->start_block * 128,
|
|
edid->blocks * 128);
|
|
return 0;
|
|
}
|
|
|
|
static int get_edid_spa_location(const u8 *edid)
|
|
{
|
|
u8 d;
|
|
|
|
if ((edid[0x7e] != 1) ||
|
|
(edid[0x80] != 0x02) ||
|
|
(edid[0x81] != 0x03)) {
|
|
return -1;
|
|
}
|
|
|
|
/* search Vendor Specific Data Block (tag 3) */
|
|
d = edid[0x82] & 0x7f;
|
|
if (d > 4) {
|
|
int i = 0x84;
|
|
int end = 0x80 + d;
|
|
|
|
do {
|
|
u8 tag = edid[i] >> 5;
|
|
u8 len = edid[i] & 0x1f;
|
|
|
|
if ((tag == 3) && (len >= 5))
|
|
return i + 4;
|
|
i += len + 1;
|
|
} while (i < end);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
int spa_loc;
|
|
int err;
|
|
int i;
|
|
|
|
if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
|
|
return -EINVAL;
|
|
if (edid->start_block != 0)
|
|
return -EINVAL;
|
|
if (edid->blocks == 0) {
|
|
/* Disable hotplug and I2C access to EDID RAM from DDC port */
|
|
state->edid.present &= ~(1 << edid->pad);
|
|
adv7604_set_hpd(state, state->edid.present);
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, state->edid.present);
|
|
|
|
/* Fall back to a 16:9 aspect ratio */
|
|
state->aspect_ratio.numerator = 16;
|
|
state->aspect_ratio.denominator = 9;
|
|
|
|
if (!state->edid.present)
|
|
state->edid.blocks = 0;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: clear EDID pad %d, edid.present = 0x%x\n",
|
|
__func__, edid->pad, state->edid.present);
|
|
return 0;
|
|
}
|
|
if (edid->blocks > 2) {
|
|
edid->blocks = 2;
|
|
return -E2BIG;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: write EDID pad %d, edid.present = 0x%x\n",
|
|
__func__, edid->pad, state->edid.present);
|
|
|
|
/* Disable hotplug and I2C access to EDID RAM from DDC port */
|
|
cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
|
|
adv7604_set_hpd(state, 0);
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 0x00);
|
|
|
|
spa_loc = get_edid_spa_location(edid->edid);
|
|
if (spa_loc < 0)
|
|
spa_loc = 0xc0; /* Default value [REF_02, p. 116] */
|
|
|
|
switch (edid->pad) {
|
|
case ADV7604_PAD_HDMI_PORT_A:
|
|
state->spa_port_a[0] = edid->edid[spa_loc];
|
|
state->spa_port_a[1] = edid->edid[spa_loc + 1];
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
rep_write(sd, 0x70, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x71, edid->edid[spa_loc + 1]);
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
rep_write(sd, 0x72, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x73, edid->edid[spa_loc + 1]);
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
rep_write(sd, 0x74, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x75, edid->edid[spa_loc + 1]);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (info->type == ADV7604) {
|
|
rep_write(sd, 0x76, spa_loc & 0xff);
|
|
rep_write_clr_set(sd, 0x77, 0x40, (spa_loc & 0x100) >> 2);
|
|
} else {
|
|
/* FIXME: Where is the SPA location LSB register ? */
|
|
rep_write_clr_set(sd, 0x71, 0x01, (spa_loc & 0x100) >> 8);
|
|
}
|
|
|
|
edid->edid[spa_loc] = state->spa_port_a[0];
|
|
edid->edid[spa_loc + 1] = state->spa_port_a[1];
|
|
|
|
memcpy(state->edid.edid, edid->edid, 128 * edid->blocks);
|
|
state->edid.blocks = edid->blocks;
|
|
state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15],
|
|
edid->edid[0x16]);
|
|
state->edid.present |= 1 << edid->pad;
|
|
|
|
err = edid_write_block(sd, 128 * edid->blocks, state->edid.edid);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "error %d writing edid pad %d\n", err, edid->pad);
|
|
return err;
|
|
}
|
|
|
|
/* adv7604 calculates the checksums and enables I2C access to internal
|
|
EDID RAM from DDC port. */
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, state->edid.present);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
if (rep_read(sd, info->edid_status_reg) & state->edid.present)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (i == 1000) {
|
|
v4l2_err(sd, "error enabling edid (0x%x)\n", state->edid.present);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/* enable hotplug after 100 ms */
|
|
queue_delayed_work(state->work_queues,
|
|
&state->delayed_work_enable_hotplug, HZ / 10);
|
|
return 0;
|
|
}
|
|
|
|
/*********** avi info frame CEA-861-E **************/
|
|
|
|
static void print_avi_infoframe(struct v4l2_subdev *sd)
|
|
{
|
|
int i;
|
|
u8 buf[14];
|
|
u8 avi_len;
|
|
u8 avi_ver;
|
|
|
|
if (!is_hdmi(sd)) {
|
|
v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n");
|
|
return;
|
|
}
|
|
if (!(io_read(sd, 0x60) & 0x01)) {
|
|
v4l2_info(sd, "AVI infoframe not received\n");
|
|
return;
|
|
}
|
|
|
|
if (io_read(sd, 0x83) & 0x01) {
|
|
v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n");
|
|
io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */
|
|
if (io_read(sd, 0x83) & 0x01) {
|
|
v4l2_info(sd, "AVI infoframe checksum error still present\n");
|
|
io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */
|
|
}
|
|
}
|
|
|
|
avi_len = infoframe_read(sd, 0xe2);
|
|
avi_ver = infoframe_read(sd, 0xe1);
|
|
v4l2_info(sd, "AVI infoframe version %d (%d byte)\n",
|
|
avi_ver, avi_len);
|
|
|
|
if (avi_ver != 0x02)
|
|
return;
|
|
|
|
for (i = 0; i < 14; i++)
|
|
buf[i] = infoframe_read(sd, i);
|
|
|
|
v4l2_info(sd,
|
|
"\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7],
|
|
buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]);
|
|
}
|
|
|
|
static int adv7604_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
struct v4l2_dv_timings timings;
|
|
struct stdi_readback stdi;
|
|
u8 reg_io_0x02 = io_read(sd, 0x02);
|
|
u8 edid_enabled;
|
|
u8 cable_det;
|
|
|
|
static const char * const csc_coeff_sel_rb[16] = {
|
|
"bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
|
|
"reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709",
|
|
"reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709",
|
|
"reserved", "reserved", "reserved", "reserved", "manual"
|
|
};
|
|
static const char * const input_color_space_txt[16] = {
|
|
"RGB limited range (16-235)", "RGB full range (0-255)",
|
|
"YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)",
|
|
"xvYCC Bt.601", "xvYCC Bt.709",
|
|
"YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)",
|
|
"invalid", "invalid", "invalid", "invalid", "invalid",
|
|
"invalid", "invalid", "automatic"
|
|
};
|
|
static const char * const rgb_quantization_range_txt[] = {
|
|
"Automatic",
|
|
"RGB limited range (16-235)",
|
|
"RGB full range (0-255)",
|
|
};
|
|
static const char * const deep_color_mode_txt[4] = {
|
|
"8-bits per channel",
|
|
"10-bits per channel",
|
|
"12-bits per channel",
|
|
"16-bits per channel (not supported)"
|
|
};
|
|
|
|
v4l2_info(sd, "-----Chip status-----\n");
|
|
v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
|
|
edid_enabled = rep_read(sd, info->edid_status_reg);
|
|
v4l2_info(sd, "EDID enabled port A: %s, B: %s, C: %s, D: %s\n",
|
|
((edid_enabled & 0x01) ? "Yes" : "No"),
|
|
((edid_enabled & 0x02) ? "Yes" : "No"),
|
|
((edid_enabled & 0x04) ? "Yes" : "No"),
|
|
((edid_enabled & 0x08) ? "Yes" : "No"));
|
|
v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
|
|
"enabled" : "disabled");
|
|
|
|
v4l2_info(sd, "-----Signal status-----\n");
|
|
cable_det = info->read_cable_det(sd);
|
|
v4l2_info(sd, "Cable detected (+5V power) port A: %s, B: %s, C: %s, D: %s\n",
|
|
((cable_det & 0x01) ? "Yes" : "No"),
|
|
((cable_det & 0x02) ? "Yes" : "No"),
|
|
((cable_det & 0x04) ? "Yes" : "No"),
|
|
((cable_det & 0x08) ? "Yes" : "No"));
|
|
v4l2_info(sd, "TMDS signal detected: %s\n",
|
|
no_signal_tmds(sd) ? "false" : "true");
|
|
v4l2_info(sd, "TMDS signal locked: %s\n",
|
|
no_lock_tmds(sd) ? "false" : "true");
|
|
v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true");
|
|
v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true");
|
|
v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true");
|
|
v4l2_info(sd, "CP free run: %s\n",
|
|
(!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off"));
|
|
v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
|
|
io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f,
|
|
(io_read(sd, 0x01) & 0x70) >> 4);
|
|
|
|
v4l2_info(sd, "-----Video Timings-----\n");
|
|
if (read_stdi(sd, &stdi))
|
|
v4l2_info(sd, "STDI: not locked\n");
|
|
else
|
|
v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n",
|
|
stdi.lcf, stdi.bl, stdi.lcvs,
|
|
stdi.interlaced ? "interlaced" : "progressive",
|
|
stdi.hs_pol, stdi.vs_pol);
|
|
if (adv7604_query_dv_timings(sd, &timings))
|
|
v4l2_info(sd, "No video detected\n");
|
|
else
|
|
v4l2_print_dv_timings(sd->name, "Detected format: ",
|
|
&timings, true);
|
|
v4l2_print_dv_timings(sd->name, "Configured format: ",
|
|
&state->timings, true);
|
|
|
|
if (no_signal(sd))
|
|
return 0;
|
|
|
|
v4l2_info(sd, "-----Color space-----\n");
|
|
v4l2_info(sd, "RGB quantization range ctrl: %s\n",
|
|
rgb_quantization_range_txt[state->rgb_quantization_range]);
|
|
v4l2_info(sd, "Input color space: %s\n",
|
|
input_color_space_txt[reg_io_0x02 >> 4]);
|
|
v4l2_info(sd, "Output color space: %s %s, saturator %s\n",
|
|
(reg_io_0x02 & 0x02) ? "RGB" : "YCbCr",
|
|
(reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)",
|
|
((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ?
|
|
"enabled" : "disabled");
|
|
v4l2_info(sd, "Color space conversion: %s\n",
|
|
csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]);
|
|
|
|
if (!is_digital_input(sd))
|
|
return 0;
|
|
|
|
v4l2_info(sd, "-----%s status-----\n", is_hdmi(sd) ? "HDMI" : "DVI-D");
|
|
v4l2_info(sd, "Digital video port selected: %c\n",
|
|
(hdmi_read(sd, 0x00) & 0x03) + 'A');
|
|
v4l2_info(sd, "HDCP encrypted content: %s\n",
|
|
(hdmi_read(sd, 0x05) & 0x40) ? "true" : "false");
|
|
v4l2_info(sd, "HDCP keys read: %s%s\n",
|
|
(hdmi_read(sd, 0x04) & 0x20) ? "yes" : "no",
|
|
(hdmi_read(sd, 0x04) & 0x10) ? "ERROR" : "");
|
|
if (is_hdmi(sd)) {
|
|
bool audio_pll_locked = hdmi_read(sd, 0x04) & 0x01;
|
|
bool audio_sample_packet_detect = hdmi_read(sd, 0x18) & 0x01;
|
|
bool audio_mute = io_read(sd, 0x65) & 0x40;
|
|
|
|
v4l2_info(sd, "Audio: pll %s, samples %s, %s\n",
|
|
audio_pll_locked ? "locked" : "not locked",
|
|
audio_sample_packet_detect ? "detected" : "not detected",
|
|
audio_mute ? "muted" : "enabled");
|
|
if (audio_pll_locked && audio_sample_packet_detect) {
|
|
v4l2_info(sd, "Audio format: %s\n",
|
|
(hdmi_read(sd, 0x07) & 0x20) ? "multi-channel" : "stereo");
|
|
}
|
|
v4l2_info(sd, "Audio CTS: %u\n", (hdmi_read(sd, 0x5b) << 12) +
|
|
(hdmi_read(sd, 0x5c) << 8) +
|
|
(hdmi_read(sd, 0x5d) & 0xf0));
|
|
v4l2_info(sd, "Audio N: %u\n", ((hdmi_read(sd, 0x5d) & 0x0f) << 16) +
|
|
(hdmi_read(sd, 0x5e) << 8) +
|
|
hdmi_read(sd, 0x5f));
|
|
v4l2_info(sd, "AV Mute: %s\n", (hdmi_read(sd, 0x04) & 0x40) ? "on" : "off");
|
|
|
|
v4l2_info(sd, "Deep color mode: %s\n", deep_color_mode_txt[(hdmi_read(sd, 0x0b) & 0x60) >> 5]);
|
|
|
|
print_avi_infoframe(sd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_ctrl_ops adv7604_ctrl_ops = {
|
|
.s_ctrl = adv7604_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops adv7604_core_ops = {
|
|
.log_status = adv7604_log_status,
|
|
.interrupt_service_routine = adv7604_isr,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = adv7604_g_register,
|
|
.s_register = adv7604_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops adv7604_video_ops = {
|
|
.s_routing = adv7604_s_routing,
|
|
.g_input_status = adv7604_g_input_status,
|
|
.s_dv_timings = adv7604_s_dv_timings,
|
|
.g_dv_timings = adv7604_g_dv_timings,
|
|
.query_dv_timings = adv7604_query_dv_timings,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops adv7604_pad_ops = {
|
|
.enum_mbus_code = adv7604_enum_mbus_code,
|
|
.get_fmt = adv7604_get_format,
|
|
.set_fmt = adv7604_set_format,
|
|
.get_edid = adv7604_get_edid,
|
|
.set_edid = adv7604_set_edid,
|
|
.dv_timings_cap = adv7604_dv_timings_cap,
|
|
.enum_dv_timings = adv7604_enum_dv_timings,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops adv7604_ops = {
|
|
.core = &adv7604_core_ops,
|
|
.video = &adv7604_video_ops,
|
|
.pad = &adv7604_pad_ops,
|
|
};
|
|
|
|
/* -------------------------- custom ctrls ---------------------------------- */
|
|
|
|
static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = {
|
|
.ops = &adv7604_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE,
|
|
.name = "Analog Sampling Phase",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0,
|
|
.max = 0x1f,
|
|
.step = 1,
|
|
.def = 0,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = {
|
|
.ops = &adv7604_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL,
|
|
.name = "Free Running Color, Manual",
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.min = false,
|
|
.max = true,
|
|
.step = 1,
|
|
.def = false,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = {
|
|
.ops = &adv7604_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR,
|
|
.name = "Free Running Color",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0x0,
|
|
.max = 0xffffff,
|
|
.step = 0x1,
|
|
.def = 0x0,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int adv7604_core_init(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7604_state *state = to_state(sd);
|
|
const struct adv7604_chip_info *info = state->info;
|
|
struct adv7604_platform_data *pdata = &state->pdata;
|
|
|
|
hdmi_write(sd, 0x48,
|
|
(pdata->disable_pwrdnb ? 0x80 : 0) |
|
|
(pdata->disable_cable_det_rst ? 0x40 : 0));
|
|
|
|
disable_input(sd);
|
|
|
|
if (pdata->default_input >= 0 &&
|
|
pdata->default_input < state->source_pad) {
|
|
state->selected_input = pdata->default_input;
|
|
select_input(sd);
|
|
enable_input(sd);
|
|
}
|
|
|
|
/* power */
|
|
io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */
|
|
io_write(sd, 0x0b, 0x44); /* Power down ESDP block */
|
|
cp_write(sd, 0xcf, 0x01); /* Power down macrovision */
|
|
|
|
/* video format */
|
|
io_write_clr_set(sd, 0x02, 0x0f,
|
|
pdata->alt_gamma << 3 |
|
|
pdata->op_656_range << 2 |
|
|
pdata->alt_data_sat << 0);
|
|
io_write_clr_set(sd, 0x05, 0x0e, pdata->blank_data << 3 |
|
|
pdata->insert_av_codes << 2 |
|
|
pdata->replicate_av_codes << 1);
|
|
adv7604_setup_format(state);
|
|
|
|
cp_write(sd, 0x69, 0x30); /* Enable CP CSC */
|
|
|
|
/* VS, HS polarities */
|
|
io_write(sd, 0x06, 0xa0 | pdata->inv_vs_pol << 2 |
|
|
pdata->inv_hs_pol << 1 | pdata->inv_llc_pol);
|
|
|
|
/* Adjust drive strength */
|
|
io_write(sd, 0x14, 0x40 | pdata->dr_str_data << 4 |
|
|
pdata->dr_str_clk << 2 |
|
|
pdata->dr_str_sync);
|
|
|
|
cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */
|
|
cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
|
|
cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold -
|
|
ADI recommended setting [REF_01, c. 2.3.3] */
|
|
cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold -
|
|
ADI recommended setting [REF_01, c. 2.3.3] */
|
|
cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution
|
|
for digital formats */
|
|
|
|
/* HDMI audio */
|
|
hdmi_write_clr_set(sd, 0x15, 0x03, 0x03); /* Mute on FIFO over-/underflow [REF_01, c. 1.2.18] */
|
|
hdmi_write_clr_set(sd, 0x1a, 0x0e, 0x08); /* Wait 1 s before unmute */
|
|
hdmi_write_clr_set(sd, 0x68, 0x06, 0x06); /* FIFO reset on over-/underflow [REF_01, c. 1.2.19] */
|
|
|
|
/* TODO from platform data */
|
|
afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */
|
|
|
|
if (adv7604_has_afe(state)) {
|
|
afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */
|
|
io_write_clr_set(sd, 0x30, 1 << 4, pdata->output_bus_lsb_to_msb << 4);
|
|
}
|
|
|
|
/* interrupts */
|
|
io_write(sd, 0x40, 0xc0 | pdata->int1_config); /* Configure INT1 */
|
|
io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */
|
|
io_write(sd, 0x6e, info->fmt_change_digital_mask); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */
|
|
io_write(sd, 0x73, info->cable_det_mask); /* Enable cable detection (+5v) interrupts */
|
|
info->setup_irqs(sd);
|
|
|
|
return v4l2_ctrl_handler_setup(sd->ctrl_handler);
|
|
}
|
|
|
|
static void adv7604_setup_irqs(struct v4l2_subdev *sd)
|
|
{
|
|
io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */
|
|
}
|
|
|
|
static void adv7611_setup_irqs(struct v4l2_subdev *sd)
|
|
{
|
|
io_write(sd, 0x41, 0xd0); /* STDI irq for any change, disable INT2 */
|
|
}
|
|
|
|
static void adv7604_unregister_clients(struct adv7604_state *state)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i) {
|
|
if (state->i2c_clients[i])
|
|
i2c_unregister_device(state->i2c_clients[i]);
|
|
}
|
|
}
|
|
|
|
static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd,
|
|
u8 addr, u8 io_reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (addr)
|
|
io_write(sd, io_reg, addr << 1);
|
|
return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1);
|
|
}
|
|
|
|
static const struct adv7604_reg_seq adv7604_recommended_settings_afe[] = {
|
|
/* reset ADI recommended settings for HDMI: */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x0d), 0x04 }, /* HDMI filter optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x0d), 0x04 }, /* HDMI filter optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x3d), 0x00 }, /* DDC bus active pull-up control */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x3e), 0x74 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x4e), 0x3b }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x57), 0x74 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x58), 0x63 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8d), 0x18 }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8e), 0x34 }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x93), 0x88 }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x94), 0x2e }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x96), 0x00 }, /* enable automatic EQ changing */
|
|
|
|
/* set ADI recommended settings for digitizer */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */
|
|
{ ADV7604_REG(ADV7604_PAGE_AFE, 0x12), 0x7b }, /* ADC noise shaping filter controls */
|
|
{ ADV7604_REG(ADV7604_PAGE_AFE, 0x0c), 0x1f }, /* CP core gain controls */
|
|
{ ADV7604_REG(ADV7604_PAGE_CP, 0x3e), 0x04 }, /* CP core pre-gain control */
|
|
{ ADV7604_REG(ADV7604_PAGE_CP, 0xc3), 0x39 }, /* CP coast control. Graphics mode */
|
|
{ ADV7604_REG(ADV7604_PAGE_CP, 0x40), 0x5c }, /* CP core pre-gain control. Graphics mode */
|
|
|
|
{ ADV7604_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv7604_reg_seq adv7604_recommended_settings_hdmi[] = {
|
|
/* set ADI recommended settings for HDMI: */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x0d), 0x84 }, /* HDMI filter optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x3d), 0x10 }, /* DDC bus active pull-up control */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x3e), 0x39 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x4e), 0x3b }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x57), 0xb6 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x58), 0x03 }, /* TMDS PLL optimization */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8d), 0x18 }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8e), 0x34 }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x93), 0x8b }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x94), 0x2d }, /* equaliser */
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x96), 0x01 }, /* enable automatic EQ changing */
|
|
|
|
/* reset ADI recommended settings for digitizer */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */
|
|
{ ADV7604_REG(ADV7604_PAGE_AFE, 0x12), 0xfb }, /* ADC noise shaping filter controls */
|
|
{ ADV7604_REG(ADV7604_PAGE_AFE, 0x0c), 0x0d }, /* CP core gain controls */
|
|
|
|
{ ADV7604_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv7604_reg_seq adv7611_recommended_settings_hdmi[] = {
|
|
/* ADV7611 Register Settings Recommendations Rev 1.5, May 2014 */
|
|
{ ADV7604_REG(ADV7604_PAGE_CP, 0x6c), 0x00 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x9b), 0x03 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x6f), 0x08 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x85), 0x1f },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x87), 0x70 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x57), 0xda },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x58), 0x01 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x03), 0x98 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x4c), 0x44 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8d), 0x04 },
|
|
{ ADV7604_REG(ADV7604_PAGE_HDMI, 0x8e), 0x1e },
|
|
|
|
{ ADV7604_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv7604_chip_info adv7604_chip_info[] = {
|
|
[ADV7604] = {
|
|
.type = ADV7604,
|
|
.has_afe = true,
|
|
.max_port = ADV7604_PAD_VGA_COMP,
|
|
.num_dv_ports = 4,
|
|
.edid_enable_reg = 0x77,
|
|
.edid_status_reg = 0x7d,
|
|
.lcf_reg = 0xb3,
|
|
.tdms_lock_mask = 0xe0,
|
|
.cable_det_mask = 0x1e,
|
|
.fmt_change_digital_mask = 0xc1,
|
|
.formats = adv7604_formats,
|
|
.nformats = ARRAY_SIZE(adv7604_formats),
|
|
.set_termination = adv7604_set_termination,
|
|
.setup_irqs = adv7604_setup_irqs,
|
|
.read_hdmi_pixelclock = adv7604_read_hdmi_pixelclock,
|
|
.read_cable_det = adv7604_read_cable_det,
|
|
.recommended_settings = {
|
|
[0] = adv7604_recommended_settings_afe,
|
|
[1] = adv7604_recommended_settings_hdmi,
|
|
},
|
|
.num_recommended_settings = {
|
|
[0] = ARRAY_SIZE(adv7604_recommended_settings_afe),
|
|
[1] = ARRAY_SIZE(adv7604_recommended_settings_hdmi),
|
|
},
|
|
.page_mask = BIT(ADV7604_PAGE_IO) | BIT(ADV7604_PAGE_AVLINK) |
|
|
BIT(ADV7604_PAGE_CEC) | BIT(ADV7604_PAGE_INFOFRAME) |
|
|
BIT(ADV7604_PAGE_ESDP) | BIT(ADV7604_PAGE_DPP) |
|
|
BIT(ADV7604_PAGE_AFE) | BIT(ADV7604_PAGE_REP) |
|
|
BIT(ADV7604_PAGE_EDID) | BIT(ADV7604_PAGE_HDMI) |
|
|
BIT(ADV7604_PAGE_TEST) | BIT(ADV7604_PAGE_CP) |
|
|
BIT(ADV7604_PAGE_VDP),
|
|
},
|
|
[ADV7611] = {
|
|
.type = ADV7611,
|
|
.has_afe = false,
|
|
.max_port = ADV7604_PAD_HDMI_PORT_A,
|
|
.num_dv_ports = 1,
|
|
.edid_enable_reg = 0x74,
|
|
.edid_status_reg = 0x76,
|
|
.lcf_reg = 0xa3,
|
|
.tdms_lock_mask = 0x43,
|
|
.cable_det_mask = 0x01,
|
|
.fmt_change_digital_mask = 0x03,
|
|
.formats = adv7611_formats,
|
|
.nformats = ARRAY_SIZE(adv7611_formats),
|
|
.set_termination = adv7611_set_termination,
|
|
.setup_irqs = adv7611_setup_irqs,
|
|
.read_hdmi_pixelclock = adv7611_read_hdmi_pixelclock,
|
|
.read_cable_det = adv7611_read_cable_det,
|
|
.recommended_settings = {
|
|
[1] = adv7611_recommended_settings_hdmi,
|
|
},
|
|
.num_recommended_settings = {
|
|
[1] = ARRAY_SIZE(adv7611_recommended_settings_hdmi),
|
|
},
|
|
.page_mask = BIT(ADV7604_PAGE_IO) | BIT(ADV7604_PAGE_CEC) |
|
|
BIT(ADV7604_PAGE_INFOFRAME) | BIT(ADV7604_PAGE_AFE) |
|
|
BIT(ADV7604_PAGE_REP) | BIT(ADV7604_PAGE_EDID) |
|
|
BIT(ADV7604_PAGE_HDMI) | BIT(ADV7604_PAGE_CP),
|
|
},
|
|
};
|
|
|
|
static struct i2c_device_id adv7604_i2c_id[] = {
|
|
{ "adv7604", (kernel_ulong_t)&adv7604_chip_info[ADV7604] },
|
|
{ "adv7611", (kernel_ulong_t)&adv7604_chip_info[ADV7611] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adv7604_i2c_id);
|
|
|
|
static struct of_device_id adv7604_of_id[] __maybe_unused = {
|
|
{ .compatible = "adi,adv7611", .data = &adv7604_chip_info[ADV7611] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adv7604_of_id);
|
|
|
|
static int adv7604_parse_dt(struct adv7604_state *state)
|
|
{
|
|
struct v4l2_of_endpoint bus_cfg;
|
|
struct device_node *endpoint;
|
|
struct device_node *np;
|
|
unsigned int flags;
|
|
|
|
np = state->i2c_clients[ADV7604_PAGE_IO]->dev.of_node;
|
|
|
|
/* Parse the endpoint. */
|
|
endpoint = of_graph_get_next_endpoint(np, NULL);
|
|
if (!endpoint)
|
|
return -EINVAL;
|
|
|
|
v4l2_of_parse_endpoint(endpoint, &bus_cfg);
|
|
of_node_put(endpoint);
|
|
|
|
flags = bus_cfg.bus.parallel.flags;
|
|
|
|
if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
|
|
state->pdata.inv_hs_pol = 1;
|
|
|
|
if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
|
|
state->pdata.inv_vs_pol = 1;
|
|
|
|
if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
|
|
state->pdata.inv_llc_pol = 1;
|
|
|
|
if (bus_cfg.bus_type == V4L2_MBUS_BT656) {
|
|
state->pdata.insert_av_codes = 1;
|
|
state->pdata.op_656_range = 1;
|
|
}
|
|
|
|
/* Disable the interrupt for now as no DT-based board uses it. */
|
|
state->pdata.int1_config = ADV7604_INT1_CONFIG_DISABLED;
|
|
|
|
/* Use the default I2C addresses. */
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_CEC] = 0x40;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_INFOFRAME] = 0x3e;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_AFE] = 0x26;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_REP] = 0x32;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_EDID] = 0x36;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_HDMI] = 0x34;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_TEST] = 0x30;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_CP] = 0x22;
|
|
state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24;
|
|
|
|
/* Hardcode the remaining platform data fields. */
|
|
state->pdata.disable_pwrdnb = 0;
|
|
state->pdata.disable_cable_det_rst = 0;
|
|
state->pdata.default_input = -1;
|
|
state->pdata.blank_data = 1;
|
|
state->pdata.alt_data_sat = 1;
|
|
state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;
|
|
state->pdata.bus_order = ADV7604_BUS_ORDER_RGB;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv7604_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
static const struct v4l2_dv_timings cea640x480 =
|
|
V4L2_DV_BT_CEA_640X480P59_94;
|
|
struct adv7604_state *state;
|
|
struct v4l2_ctrl_handler *hdl;
|
|
struct v4l2_subdev *sd;
|
|
unsigned int i;
|
|
u16 val;
|
|
int err;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n",
|
|
client->addr << 1);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
|
if (!state) {
|
|
v4l_err(client, "Could not allocate adv7604_state memory!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
state->i2c_clients[ADV7604_PAGE_IO] = client;
|
|
|
|
/* initialize variables */
|
|
state->restart_stdi_once = true;
|
|
state->selected_input = ~0;
|
|
|
|
if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) {
|
|
const struct of_device_id *oid;
|
|
|
|
oid = of_match_node(adv7604_of_id, client->dev.of_node);
|
|
state->info = oid->data;
|
|
|
|
err = adv7604_parse_dt(state);
|
|
if (err < 0) {
|
|
v4l_err(client, "DT parsing error\n");
|
|
return err;
|
|
}
|
|
} else if (client->dev.platform_data) {
|
|
struct adv7604_platform_data *pdata = client->dev.platform_data;
|
|
|
|
state->info = (const struct adv7604_chip_info *)id->driver_data;
|
|
state->pdata = *pdata;
|
|
} else {
|
|
v4l_err(client, "No platform data!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Request GPIOs. */
|
|
for (i = 0; i < state->info->num_dv_ports; ++i) {
|
|
state->hpd_gpio[i] =
|
|
devm_gpiod_get_index(&client->dev, "hpd", i);
|
|
if (IS_ERR(state->hpd_gpio[i]))
|
|
continue;
|
|
|
|
gpiod_direction_output(state->hpd_gpio[i], 0);
|
|
|
|
v4l_info(client, "Handling HPD %u GPIO\n", i);
|
|
}
|
|
|
|
state->timings = cea640x480;
|
|
state->format = adv7604_format_info(state, V4L2_MBUS_FMT_YUYV8_2X8);
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &adv7604_ops);
|
|
snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
|
|
id->name, i2c_adapter_id(client->adapter),
|
|
client->addr);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
|
|
/*
|
|
* Verify that the chip is present. On ADV7604 the RD_INFO register only
|
|
* identifies the revision, while on ADV7611 it identifies the model as
|
|
* well. Use the HDMI slave address on ADV7604 and RD_INFO on ADV7611.
|
|
*/
|
|
if (state->info->type == ADV7604) {
|
|
val = adv_smbus_read_byte_data_check(client, 0xfb, false);
|
|
if (val != 0x68) {
|
|
v4l2_info(sd, "not an adv7604 on address 0x%x\n",
|
|
client->addr << 1);
|
|
return -ENODEV;
|
|
}
|
|
} else {
|
|
val = (adv_smbus_read_byte_data_check(client, 0xea, false) << 8)
|
|
| (adv_smbus_read_byte_data_check(client, 0xeb, false) << 0);
|
|
if (val != 0x2051) {
|
|
v4l2_info(sd, "not an adv7611 on address 0x%x\n",
|
|
client->addr << 1);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* control handlers */
|
|
hdl = &state->hdl;
|
|
v4l2_ctrl_handler_init(hdl, adv7604_has_afe(state) ? 9 : 8);
|
|
|
|
v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
|
|
v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops,
|
|
V4L2_CID_CONTRAST, 0, 255, 1, 128);
|
|
v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 255, 1, 128);
|
|
v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops,
|
|
V4L2_CID_HUE, 0, 128, 1, 0);
|
|
|
|
/* private controls */
|
|
state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
|
|
V4L2_CID_DV_RX_POWER_PRESENT, 0,
|
|
(1 << state->info->num_dv_ports) - 1, 0, 0);
|
|
state->rgb_quantization_range_ctrl =
|
|
v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops,
|
|
V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
|
|
0, V4L2_DV_RGB_RANGE_AUTO);
|
|
|
|
/* custom controls */
|
|
if (adv7604_has_afe(state))
|
|
state->analog_sampling_phase_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL);
|
|
state->free_run_color_manual_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL);
|
|
state->free_run_color_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL);
|
|
|
|
sd->ctrl_handler = hdl;
|
|
if (hdl->error) {
|
|
err = hdl->error;
|
|
goto err_hdl;
|
|
}
|
|
state->detect_tx_5v_ctrl->is_private = true;
|
|
state->rgb_quantization_range_ctrl->is_private = true;
|
|
if (adv7604_has_afe(state))
|
|
state->analog_sampling_phase_ctrl->is_private = true;
|
|
state->free_run_color_manual_ctrl->is_private = true;
|
|
state->free_run_color_ctrl->is_private = true;
|
|
|
|
if (adv7604_s_detect_tx_5v_ctrl(sd)) {
|
|
err = -ENODEV;
|
|
goto err_hdl;
|
|
}
|
|
|
|
for (i = 1; i < ADV7604_PAGE_MAX; ++i) {
|
|
if (!(BIT(i) & state->info->page_mask))
|
|
continue;
|
|
|
|
state->i2c_clients[i] =
|
|
adv7604_dummy_client(sd, state->pdata.i2c_addresses[i],
|
|
0xf2 + i);
|
|
if (state->i2c_clients[i] == NULL) {
|
|
err = -ENOMEM;
|
|
v4l2_err(sd, "failed to create i2c client %u\n", i);
|
|
goto err_i2c;
|
|
}
|
|
}
|
|
|
|
/* work queues */
|
|
state->work_queues = create_singlethread_workqueue(client->name);
|
|
if (!state->work_queues) {
|
|
v4l2_err(sd, "Could not create work queue\n");
|
|
err = -ENOMEM;
|
|
goto err_i2c;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
|
|
adv7604_delayed_work_enable_hotplug);
|
|
|
|
state->source_pad = state->info->num_dv_ports
|
|
+ (state->info->has_afe ? 2 : 0);
|
|
for (i = 0; i < state->source_pad; ++i)
|
|
state->pads[i].flags = MEDIA_PAD_FL_SINK;
|
|
state->pads[state->source_pad].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
err = media_entity_init(&sd->entity, state->source_pad + 1,
|
|
state->pads, 0);
|
|
if (err)
|
|
goto err_work_queues;
|
|
|
|
err = adv7604_core_init(sd);
|
|
if (err)
|
|
goto err_entity;
|
|
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
err = v4l2_async_register_subdev(sd);
|
|
if (err)
|
|
goto err_entity;
|
|
|
|
return 0;
|
|
|
|
err_entity:
|
|
media_entity_cleanup(&sd->entity);
|
|
err_work_queues:
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
destroy_workqueue(state->work_queues);
|
|
err_i2c:
|
|
adv7604_unregister_clients(state);
|
|
err_hdl:
|
|
v4l2_ctrl_handler_free(hdl);
|
|
return err;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int adv7604_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct adv7604_state *state = to_state(sd);
|
|
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
destroy_workqueue(state->work_queues);
|
|
v4l2_async_unregister_subdev(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
adv7604_unregister_clients(to_state(sd));
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver adv7604_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "adv7604",
|
|
.of_match_table = of_match_ptr(adv7604_of_id),
|
|
},
|
|
.probe = adv7604_probe,
|
|
.remove = adv7604_remove,
|
|
.id_table = adv7604_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(adv7604_driver);
|