590 lines
14 KiB
C
590 lines
14 KiB
C
/*
|
|
*
|
|
* Copyright (c) 2003 Gerd Knorr
|
|
* Copyright (c) 2003 Pavel Machek
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "bttv.h"
|
|
#include "bttvp.h"
|
|
|
|
|
|
static int ir_debug;
|
|
module_param(ir_debug, int, 0644);
|
|
|
|
static int ir_rc5_remote_gap = 885;
|
|
module_param(ir_rc5_remote_gap, int, 0644);
|
|
|
|
#undef dprintk
|
|
#define dprintk(fmt, ...) \
|
|
do { \
|
|
if (ir_debug >= 1) \
|
|
pr_info(fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define DEVNAME "bttv-input"
|
|
|
|
#define MODULE_NAME "bttv"
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static void ir_handle_key(struct bttv *btv)
|
|
{
|
|
struct bttv_ir *ir = btv->remote;
|
|
u32 gpio,data;
|
|
|
|
/* read gpio value */
|
|
gpio = bttv_gpio_read(&btv->c);
|
|
if (ir->polling) {
|
|
if (ir->last_gpio == gpio)
|
|
return;
|
|
ir->last_gpio = gpio;
|
|
}
|
|
|
|
/* extract data */
|
|
data = ir_extract_bits(gpio, ir->mask_keycode);
|
|
dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
|
|
gpio, data,
|
|
ir->polling ? "poll" : "irq",
|
|
(gpio & ir->mask_keydown) ? " down" : "",
|
|
(gpio & ir->mask_keyup) ? " up" : "");
|
|
|
|
if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
|
|
(ir->mask_keyup && !(gpio & ir->mask_keyup))) {
|
|
rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
|
|
} else {
|
|
/* HACK: Probably, ir->mask_keydown is missing
|
|
for this board */
|
|
if (btv->c.type == BTTV_BOARD_WINFAST2000)
|
|
rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
|
|
|
|
rc_keyup(ir->dev);
|
|
}
|
|
}
|
|
|
|
static void ir_enltv_handle_key(struct bttv *btv)
|
|
{
|
|
struct bttv_ir *ir = btv->remote;
|
|
u32 gpio, data, keyup;
|
|
|
|
/* read gpio value */
|
|
gpio = bttv_gpio_read(&btv->c);
|
|
|
|
/* extract data */
|
|
data = ir_extract_bits(gpio, ir->mask_keycode);
|
|
|
|
/* Check if it is keyup */
|
|
keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;
|
|
|
|
if ((ir->last_gpio & 0x7f) != data) {
|
|
dprintk("gpio=0x%x code=%d | %s\n",
|
|
gpio, data,
|
|
(gpio & ir->mask_keyup) ? " up" : "up/down");
|
|
|
|
rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
|
|
if (keyup)
|
|
rc_keyup(ir->dev);
|
|
} else {
|
|
if ((ir->last_gpio & 1 << 31) == keyup)
|
|
return;
|
|
|
|
dprintk("(cnt) gpio=0x%x code=%d | %s\n",
|
|
gpio, data,
|
|
(gpio & ir->mask_keyup) ? " up" : "down");
|
|
|
|
if (keyup)
|
|
rc_keyup(ir->dev);
|
|
else
|
|
rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
|
|
}
|
|
|
|
ir->last_gpio = data | keyup;
|
|
}
|
|
|
|
static int bttv_rc5_irq(struct bttv *btv);
|
|
|
|
void bttv_input_irq(struct bttv *btv)
|
|
{
|
|
struct bttv_ir *ir = btv->remote;
|
|
|
|
if (ir->rc5_gpio)
|
|
bttv_rc5_irq(btv);
|
|
else if (!ir->polling)
|
|
ir_handle_key(btv);
|
|
}
|
|
|
|
static void bttv_input_timer(unsigned long data)
|
|
{
|
|
struct bttv *btv = (struct bttv*)data;
|
|
struct bttv_ir *ir = btv->remote;
|
|
|
|
if (btv->c.type == BTTV_BOARD_ENLTV_FM_2)
|
|
ir_enltv_handle_key(btv);
|
|
else
|
|
ir_handle_key(btv);
|
|
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
|
|
}
|
|
|
|
/*
|
|
* FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
|
|
* on the rc-core way. As we need to be sure that both IRQ transitions are
|
|
* properly triggered, Better to touch it only with this hardware for
|
|
* testing.
|
|
*/
|
|
|
|
#define RC5_START(x) (((x) >> 12) & 0x03)
|
|
#define RC5_TOGGLE(x) (((x) >> 11) & 0x01)
|
|
#define RC5_ADDR(x) (((x) >> 6) & 0x1f)
|
|
#define RC5_INSTR(x) (((x) >> 0) & 0x3f)
|
|
|
|
/* decode raw bit pattern to RC5 code */
|
|
static u32 bttv_rc5_decode(unsigned int code)
|
|
{
|
|
unsigned int org_code = code;
|
|
unsigned int pair;
|
|
unsigned int rc5 = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 14; ++i) {
|
|
pair = code & 0x3;
|
|
code >>= 2;
|
|
|
|
rc5 <<= 1;
|
|
switch (pair) {
|
|
case 0:
|
|
case 2:
|
|
break;
|
|
case 1:
|
|
rc5 |= 1;
|
|
break;
|
|
case 3:
|
|
dprintk("rc5_decode(%x) bad code\n",
|
|
org_code);
|
|
return 0;
|
|
}
|
|
}
|
|
dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
|
|
"instr=%x\n", rc5, org_code, RC5_START(rc5),
|
|
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
|
|
return rc5;
|
|
}
|
|
|
|
static void bttv_rc5_timer_end(unsigned long data)
|
|
{
|
|
struct bttv_ir *ir = (struct bttv_ir *)data;
|
|
struct timeval tv;
|
|
u32 gap, rc5, scancode;
|
|
u8 toggle, command, system;
|
|
|
|
/* get time */
|
|
do_gettimeofday(&tv);
|
|
|
|
/* avoid overflow with gap >1s */
|
|
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
|
|
gap = 200000;
|
|
} else {
|
|
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
|
|
tv.tv_usec - ir->base_time.tv_usec;
|
|
}
|
|
|
|
/* signal we're ready to start a new code */
|
|
ir->active = false;
|
|
|
|
/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
|
|
if (gap < 28000) {
|
|
dprintk("spurious timer_end\n");
|
|
return;
|
|
}
|
|
|
|
if (ir->last_bit < 20) {
|
|
/* ignore spurious codes (caused by light/other remotes) */
|
|
dprintk("short code: %x\n", ir->code);
|
|
return;
|
|
}
|
|
|
|
ir->code = (ir->code << ir->shift_by) | 1;
|
|
rc5 = bttv_rc5_decode(ir->code);
|
|
|
|
toggle = RC5_TOGGLE(rc5);
|
|
system = RC5_ADDR(rc5);
|
|
command = RC5_INSTR(rc5);
|
|
|
|
switch (RC5_START(rc5)) {
|
|
case 0x3:
|
|
break;
|
|
case 0x2:
|
|
command += 0x40;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
scancode = RC_SCANCODE_RC5(system, command);
|
|
rc_keydown(ir->dev, RC_TYPE_RC5, scancode, toggle);
|
|
dprintk("scancode %x, toggle %x\n", scancode, toggle);
|
|
}
|
|
|
|
static int bttv_rc5_irq(struct bttv *btv)
|
|
{
|
|
struct bttv_ir *ir = btv->remote;
|
|
struct timeval tv;
|
|
u32 gpio;
|
|
u32 gap;
|
|
unsigned long current_jiffies;
|
|
|
|
/* read gpio port */
|
|
gpio = bttv_gpio_read(&btv->c);
|
|
|
|
/* get time of bit */
|
|
current_jiffies = jiffies;
|
|
do_gettimeofday(&tv);
|
|
|
|
/* avoid overflow with gap >1s */
|
|
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
|
|
gap = 200000;
|
|
} else {
|
|
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
|
|
tv.tv_usec - ir->base_time.tv_usec;
|
|
}
|
|
|
|
dprintk("RC5 IRQ: gap %d us for %s\n",
|
|
gap, (gpio & 0x20) ? "mark" : "space");
|
|
|
|
/* remote IRQ? */
|
|
if (!(gpio & 0x20))
|
|
return 0;
|
|
|
|
/* active code => add bit */
|
|
if (ir->active) {
|
|
/* only if in the code (otherwise spurious IRQ or timer
|
|
late) */
|
|
if (ir->last_bit < 28) {
|
|
ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
|
|
ir_rc5_remote_gap;
|
|
ir->code |= 1 << ir->last_bit;
|
|
}
|
|
/* starting new code */
|
|
} else {
|
|
ir->active = true;
|
|
ir->code = 0;
|
|
ir->base_time = tv;
|
|
ir->last_bit = 0;
|
|
|
|
mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30));
|
|
}
|
|
|
|
/* toggle GPIO pin 4 to reset the irq */
|
|
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
|
|
bttv_gpio_write(&btv->c, gpio | (1 << 4));
|
|
return 1;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
|
|
{
|
|
if (ir->polling) {
|
|
setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
|
|
ir->timer.expires = jiffies + msecs_to_jiffies(1000);
|
|
add_timer(&ir->timer);
|
|
} else if (ir->rc5_gpio) {
|
|
/* set timer_end for code completion */
|
|
setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
|
|
ir->shift_by = 1;
|
|
ir->rc5_remote_gap = ir_rc5_remote_gap;
|
|
}
|
|
}
|
|
|
|
static void bttv_ir_stop(struct bttv *btv)
|
|
{
|
|
if (btv->remote->polling)
|
|
del_timer_sync(&btv->remote->timer);
|
|
|
|
if (btv->remote->rc5_gpio) {
|
|
u32 gpio;
|
|
|
|
del_timer_sync(&btv->remote->timer);
|
|
|
|
gpio = bttv_gpio_read(&btv->c);
|
|
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Get_key functions used by I2C remotes
|
|
*/
|
|
|
|
static int get_key_pv951(struct IR_i2c *ir, enum rc_type *protocol,
|
|
u32 *scancode, u8 *toggle)
|
|
{
|
|
unsigned char b;
|
|
|
|
/* poll IR chip */
|
|
if (1 != i2c_master_recv(ir->c, &b, 1)) {
|
|
dprintk("read error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* ignore 0xaa */
|
|
if (b==0xaa)
|
|
return 0;
|
|
dprintk("key %02x\n", b);
|
|
|
|
/*
|
|
* NOTE:
|
|
* lirc_i2c maps the pv951 code as:
|
|
* addr = 0x61D6
|
|
* cmd = bit_reverse (b)
|
|
* So, it seems that this device uses NEC extended
|
|
* I decided to not fix the table, due to two reasons:
|
|
* 1) Without the actual device, this is only a guess;
|
|
* 2) As the addr is not reported via I2C, nor can be changed,
|
|
* the device is bound to the vendor-provided RC.
|
|
*/
|
|
|
|
*protocol = RC_TYPE_UNKNOWN;
|
|
*scancode = b;
|
|
*toggle = 0;
|
|
return 1;
|
|
}
|
|
|
|
/* Instantiate the I2C IR receiver device, if present */
|
|
void init_bttv_i2c_ir(struct bttv *btv)
|
|
{
|
|
const unsigned short addr_list[] = {
|
|
0x1a, 0x18, 0x64, 0x30, 0x71,
|
|
I2C_CLIENT_END
|
|
};
|
|
struct i2c_board_info info;
|
|
struct i2c_client *i2c_dev;
|
|
|
|
if (0 != btv->i2c_rc)
|
|
return;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
memset(&btv->init_data, 0, sizeof(btv->init_data));
|
|
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
|
|
|
|
switch (btv->c.type) {
|
|
case BTTV_BOARD_PV951:
|
|
btv->init_data.name = "PV951";
|
|
btv->init_data.get_key = get_key_pv951;
|
|
btv->init_data.ir_codes = RC_MAP_PV951;
|
|
info.addr = 0x4b;
|
|
break;
|
|
}
|
|
|
|
if (btv->init_data.name) {
|
|
info.platform_data = &btv->init_data;
|
|
i2c_dev = i2c_new_device(&btv->c.i2c_adap, &info);
|
|
} else {
|
|
/*
|
|
* The external IR receiver is at i2c address 0x34 (0x35 for
|
|
* reads). Future Hauppauge cards will have an internal
|
|
* receiver at 0x30 (0x31 for reads). In theory, both can be
|
|
* fitted, and Hauppauge suggest an external overrides an
|
|
* internal.
|
|
* That's why we probe 0x1a (~0x34) first. CB
|
|
*/
|
|
i2c_dev = i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
|
|
}
|
|
if (NULL == i2c_dev)
|
|
return;
|
|
|
|
#if defined(CONFIG_MODULES) && defined(MODULE)
|
|
request_module("ir-kbd-i2c");
|
|
#endif
|
|
}
|
|
|
|
int bttv_input_init(struct bttv *btv)
|
|
{
|
|
struct bttv_ir *ir;
|
|
char *ir_codes = NULL;
|
|
struct rc_dev *rc;
|
|
int err = -ENOMEM;
|
|
|
|
if (!btv->has_remote)
|
|
return -ENODEV;
|
|
|
|
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
|
|
rc = rc_allocate_device();
|
|
if (!ir || !rc)
|
|
goto err_out_free;
|
|
|
|
/* detect & configure */
|
|
switch (btv->c.type) {
|
|
case BTTV_BOARD_AVERMEDIA:
|
|
case BTTV_BOARD_AVPHONE98:
|
|
case BTTV_BOARD_AVERMEDIA98:
|
|
ir_codes = RC_MAP_AVERMEDIA;
|
|
ir->mask_keycode = 0xf88000;
|
|
ir->mask_keydown = 0x010000;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
|
|
case BTTV_BOARD_AVDVBT_761:
|
|
case BTTV_BOARD_AVDVBT_771:
|
|
ir_codes = RC_MAP_AVERMEDIA_DVBT;
|
|
ir->mask_keycode = 0x0f00c0;
|
|
ir->mask_keydown = 0x000020;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
|
|
case BTTV_BOARD_PXELVWPLTVPAK:
|
|
ir_codes = RC_MAP_PIXELVIEW;
|
|
ir->mask_keycode = 0x003e00;
|
|
ir->mask_keyup = 0x010000;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
case BTTV_BOARD_PV_M4900:
|
|
case BTTV_BOARD_PV_BT878P_9B:
|
|
case BTTV_BOARD_PV_BT878P_PLUS:
|
|
ir_codes = RC_MAP_PIXELVIEW;
|
|
ir->mask_keycode = 0x001f00;
|
|
ir->mask_keyup = 0x008000;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
|
|
case BTTV_BOARD_WINFAST2000:
|
|
ir_codes = RC_MAP_WINFAST;
|
|
ir->mask_keycode = 0x1f8;
|
|
break;
|
|
case BTTV_BOARD_MAGICTVIEW061:
|
|
case BTTV_BOARD_MAGICTVIEW063:
|
|
ir_codes = RC_MAP_WINFAST;
|
|
ir->mask_keycode = 0x0008e000;
|
|
ir->mask_keydown = 0x00200000;
|
|
break;
|
|
case BTTV_BOARD_APAC_VIEWCOMP:
|
|
ir_codes = RC_MAP_APAC_VIEWCOMP;
|
|
ir->mask_keycode = 0x001f00;
|
|
ir->mask_keyup = 0x008000;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
case BTTV_BOARD_ASKEY_CPH03X:
|
|
case BTTV_BOARD_CONCEPTRONIC_CTVFMI2:
|
|
case BTTV_BOARD_CONTVFMI:
|
|
case BTTV_BOARD_KWORLD_VSTREAM_XPERT:
|
|
ir_codes = RC_MAP_PIXELVIEW;
|
|
ir->mask_keycode = 0x001F00;
|
|
ir->mask_keyup = 0x006000;
|
|
ir->polling = 50; // ms
|
|
break;
|
|
case BTTV_BOARD_NEBULA_DIGITV:
|
|
ir_codes = RC_MAP_NEBULA;
|
|
ir->rc5_gpio = true;
|
|
break;
|
|
case BTTV_BOARD_MACHTV_MAGICTV:
|
|
ir_codes = RC_MAP_APAC_VIEWCOMP;
|
|
ir->mask_keycode = 0x001F00;
|
|
ir->mask_keyup = 0x004000;
|
|
ir->polling = 50; /* ms */
|
|
break;
|
|
case BTTV_BOARD_KOZUMI_KTV_01C:
|
|
ir_codes = RC_MAP_PCTV_SEDNA;
|
|
ir->mask_keycode = 0x001f00;
|
|
ir->mask_keyup = 0x006000;
|
|
ir->polling = 50; /* ms */
|
|
break;
|
|
case BTTV_BOARD_ENLTV_FM_2:
|
|
ir_codes = RC_MAP_ENCORE_ENLTV2;
|
|
ir->mask_keycode = 0x00fd00;
|
|
ir->mask_keyup = 0x000080;
|
|
ir->polling = 1; /* ms */
|
|
ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c),
|
|
ir->mask_keycode);
|
|
break;
|
|
}
|
|
|
|
if (!ir_codes) {
|
|
dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
|
|
err = -ENODEV;
|
|
goto err_out_free;
|
|
}
|
|
|
|
if (ir->rc5_gpio) {
|
|
u32 gpio;
|
|
/* enable remote irq */
|
|
bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4);
|
|
gpio = bttv_gpio_read(&btv->c);
|
|
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
|
|
bttv_gpio_write(&btv->c, gpio | (1 << 4));
|
|
} else {
|
|
/* init hardware-specific stuff */
|
|
bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0);
|
|
}
|
|
|
|
/* init input device */
|
|
ir->dev = rc;
|
|
|
|
snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
|
|
btv->c.type);
|
|
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
|
|
pci_name(btv->c.pci));
|
|
|
|
rc->input_name = ir->name;
|
|
rc->input_phys = ir->phys;
|
|
rc->input_id.bustype = BUS_PCI;
|
|
rc->input_id.version = 1;
|
|
if (btv->c.pci->subsystem_vendor) {
|
|
rc->input_id.vendor = btv->c.pci->subsystem_vendor;
|
|
rc->input_id.product = btv->c.pci->subsystem_device;
|
|
} else {
|
|
rc->input_id.vendor = btv->c.pci->vendor;
|
|
rc->input_id.product = btv->c.pci->device;
|
|
}
|
|
rc->dev.parent = &btv->c.pci->dev;
|
|
rc->map_name = ir_codes;
|
|
rc->driver_name = MODULE_NAME;
|
|
|
|
btv->remote = ir;
|
|
bttv_ir_start(btv, ir);
|
|
|
|
/* all done */
|
|
err = rc_register_device(rc);
|
|
if (err)
|
|
goto err_out_stop;
|
|
|
|
return 0;
|
|
|
|
err_out_stop:
|
|
bttv_ir_stop(btv);
|
|
btv->remote = NULL;
|
|
err_out_free:
|
|
rc_free_device(rc);
|
|
kfree(ir);
|
|
return err;
|
|
}
|
|
|
|
void bttv_input_fini(struct bttv *btv)
|
|
{
|
|
if (btv->remote == NULL)
|
|
return;
|
|
|
|
bttv_ir_stop(btv);
|
|
rc_unregister_device(btv->remote->dev);
|
|
kfree(btv->remote);
|
|
btv->remote = NULL;
|
|
}
|