1947 lines
48 KiB
C
1947 lines
48 KiB
C
/*
|
|
* USB Host Controller Driver for IMX21
|
|
*
|
|
* Copyright (C) 2006 Loping Dog Embedded Systems
|
|
* Copyright (C) 2009 Martin Fuzzey
|
|
* Originally written by Jay Monkman <jtm@lopingdog.com>
|
|
* Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
|
|
/*
|
|
* The i.MX21 USB hardware contains
|
|
* * 32 transfer descriptors (called ETDs)
|
|
* * 4Kb of Data memory
|
|
*
|
|
* The data memory is shared between the host and function controllers
|
|
* (but this driver only supports the host controller)
|
|
*
|
|
* So setting up a transfer involves:
|
|
* * Allocating a ETD
|
|
* * Fill in ETD with appropriate information
|
|
* * Allocating data memory (and putting the offset in the ETD)
|
|
* * Activate the ETD
|
|
* * Get interrupt when done.
|
|
*
|
|
* An ETD is assigned to each active endpoint.
|
|
*
|
|
* Low resource (ETD and Data memory) situations are handled differently for
|
|
* isochronous and non insosynchronous transactions :
|
|
*
|
|
* Non ISOC transfers are queued if either ETDs or Data memory are unavailable
|
|
*
|
|
* ISOC transfers use 2 ETDs per endpoint to achieve double buffering.
|
|
* They allocate both ETDs and Data memory during URB submission
|
|
* (and fail if unavailable).
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "imx21-hcd.h"
|
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
#define DEBUG_LOG_FRAME(imx21, etd, event) \
|
|
(etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB)
|
|
#else
|
|
#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0)
|
|
#endif
|
|
|
|
static const char hcd_name[] = "imx21-hcd";
|
|
|
|
static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd)
|
|
{
|
|
return (struct imx21 *)hcd->hcd_priv;
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* Hardware access helpers */
|
|
/* =========================================== */
|
|
|
|
static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
writel(readl(reg) | mask, reg);
|
|
}
|
|
|
|
static inline void clear_register_bits(struct imx21 *imx21,
|
|
u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
writel(readl(reg) & ~mask, reg);
|
|
}
|
|
|
|
static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
|
|
if (readl(reg) & mask)
|
|
writel(mask, reg);
|
|
}
|
|
|
|
static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
|
|
{
|
|
void __iomem *reg = imx21->regs + offset;
|
|
|
|
if (!(readl(reg) & mask))
|
|
writel(mask, reg);
|
|
}
|
|
|
|
static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value)
|
|
{
|
|
writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword));
|
|
}
|
|
|
|
static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword)
|
|
{
|
|
return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword));
|
|
}
|
|
|
|
static inline int wrap_frame(int counter)
|
|
{
|
|
return counter & 0xFFFF;
|
|
}
|
|
|
|
static inline int frame_after(int frame, int after)
|
|
{
|
|
/* handle wrapping like jiffies time_afer */
|
|
return (s16)((s16)after - (s16)frame) < 0;
|
|
}
|
|
|
|
static int imx21_hc_get_frame(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
|
|
return wrap_frame(readl(imx21->regs + USBH_FRMNUB));
|
|
}
|
|
|
|
static inline bool unsuitable_for_dma(dma_addr_t addr)
|
|
{
|
|
return (addr & 3) != 0;
|
|
}
|
|
|
|
#include "imx21-dbg.c"
|
|
|
|
static void nonisoc_urb_completed_for_etd(
|
|
struct imx21 *imx21, struct etd_priv *etd, int status);
|
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb);
|
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd);
|
|
|
|
/* =========================================== */
|
|
/* ETD management */
|
|
/* =========================================== */
|
|
|
|
static int alloc_etd(struct imx21 *imx21)
|
|
{
|
|
int i;
|
|
struct etd_priv *etd = imx21->etd;
|
|
|
|
for (i = 0; i < USB_NUM_ETD; i++, etd++) {
|
|
if (etd->alloc == 0) {
|
|
memset(etd, 0, sizeof(imx21->etd[0]));
|
|
etd->alloc = 1;
|
|
debug_etd_allocated(imx21);
|
|
return i;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void disactivate_etd(struct imx21 *imx21, int num)
|
|
{
|
|
int etd_mask = (1 << num);
|
|
struct etd_priv *etd = &imx21->etd[num];
|
|
|
|
writel(etd_mask, imx21->regs + USBH_ETDENCLR);
|
|
clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
|
|
writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR);
|
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
|
|
|
|
etd->active_count = 0;
|
|
|
|
DEBUG_LOG_FRAME(imx21, etd, disactivated);
|
|
}
|
|
|
|
static void reset_etd(struct imx21 *imx21, int num)
|
|
{
|
|
struct etd_priv *etd = imx21->etd + num;
|
|
int i;
|
|
|
|
disactivate_etd(imx21, num);
|
|
|
|
for (i = 0; i < 4; i++)
|
|
etd_writel(imx21, num, i, 0);
|
|
etd->urb = NULL;
|
|
etd->ep = NULL;
|
|
etd->td = NULL;
|
|
etd->bounce_buffer = NULL;
|
|
}
|
|
|
|
static void free_etd(struct imx21 *imx21, int num)
|
|
{
|
|
if (num < 0)
|
|
return;
|
|
|
|
if (num >= USB_NUM_ETD) {
|
|
dev_err(imx21->dev, "BAD etd=%d!\n", num);
|
|
return;
|
|
}
|
|
if (imx21->etd[num].alloc == 0) {
|
|
dev_err(imx21->dev, "ETD %d already free!\n", num);
|
|
return;
|
|
}
|
|
|
|
debug_etd_freed(imx21);
|
|
reset_etd(imx21, num);
|
|
memset(&imx21->etd[num], 0, sizeof(imx21->etd[0]));
|
|
}
|
|
|
|
|
|
static void setup_etd_dword0(struct imx21 *imx21,
|
|
int etd_num, struct urb *urb, u8 dir, u16 maxpacket)
|
|
{
|
|
etd_writel(imx21, etd_num, 0,
|
|
((u32) usb_pipedevice(urb->pipe)) << DW0_ADDRESS |
|
|
((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) |
|
|
((u32) dir << DW0_DIRECT) |
|
|
((u32) ((urb->dev->speed == USB_SPEED_LOW) ?
|
|
1 : 0) << DW0_SPEED) |
|
|
((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) |
|
|
((u32) maxpacket << DW0_MAXPKTSIZ));
|
|
}
|
|
|
|
/**
|
|
* Copy buffer to data controller data memory.
|
|
* We cannot use memcpy_toio() because the hardware requires 32bit writes
|
|
*/
|
|
static void copy_to_dmem(
|
|
struct imx21 *imx21, int dmem_offset, void *src, int count)
|
|
{
|
|
void __iomem *dmem = imx21->regs + USBOTG_DMEM + dmem_offset;
|
|
u32 word = 0;
|
|
u8 *p = src;
|
|
int byte = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
byte = i % 4;
|
|
word += (*p++ << (byte * 8));
|
|
if (byte == 3) {
|
|
writel(word, dmem);
|
|
dmem += 4;
|
|
word = 0;
|
|
}
|
|
}
|
|
|
|
if (count && byte != 3)
|
|
writel(word, dmem);
|
|
}
|
|
|
|
static void activate_etd(struct imx21 *imx21, int etd_num, u8 dir)
|
|
{
|
|
u32 etd_mask = 1 << etd_num;
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
if (etd->dma_handle && unsuitable_for_dma(etd->dma_handle)) {
|
|
/* For non aligned isoc the condition below is always true */
|
|
if (etd->len <= etd->dmem_size) {
|
|
/* Fits into data memory, use PIO */
|
|
if (dir != TD_DIR_IN) {
|
|
copy_to_dmem(imx21,
|
|
etd->dmem_offset,
|
|
etd->cpu_buffer, etd->len);
|
|
}
|
|
etd->dma_handle = 0;
|
|
|
|
} else {
|
|
/* Too big for data memory, use bounce buffer */
|
|
enum dma_data_direction dmadir;
|
|
|
|
if (dir == TD_DIR_IN) {
|
|
dmadir = DMA_FROM_DEVICE;
|
|
etd->bounce_buffer = kmalloc(etd->len,
|
|
GFP_ATOMIC);
|
|
} else {
|
|
dmadir = DMA_TO_DEVICE;
|
|
etd->bounce_buffer = kmemdup(etd->cpu_buffer,
|
|
etd->len,
|
|
GFP_ATOMIC);
|
|
}
|
|
if (!etd->bounce_buffer) {
|
|
dev_err(imx21->dev, "failed bounce alloc\n");
|
|
goto err_bounce_alloc;
|
|
}
|
|
|
|
etd->dma_handle =
|
|
dma_map_single(imx21->dev,
|
|
etd->bounce_buffer,
|
|
etd->len,
|
|
dmadir);
|
|
if (dma_mapping_error(imx21->dev, etd->dma_handle)) {
|
|
dev_err(imx21->dev, "failed bounce map\n");
|
|
goto err_bounce_map;
|
|
}
|
|
}
|
|
}
|
|
|
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
|
|
set_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
|
|
if (etd->dma_handle) {
|
|
set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask);
|
|
writel(etd->dma_handle, imx21->regs + USB_ETDSMSA(etd_num));
|
|
set_register_bits(imx21, USB_ETDDMAEN, etd_mask);
|
|
} else {
|
|
if (dir != TD_DIR_IN) {
|
|
/* need to set for ZLP and PIO */
|
|
set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
}
|
|
}
|
|
|
|
DEBUG_LOG_FRAME(imx21, etd, activated);
|
|
|
|
#ifdef DEBUG
|
|
if (!etd->active_count) {
|
|
int i;
|
|
etd->activated_frame = readl(imx21->regs + USBH_FRMNUB);
|
|
etd->disactivated_frame = -1;
|
|
etd->last_int_frame = -1;
|
|
etd->last_req_frame = -1;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i);
|
|
}
|
|
#endif
|
|
|
|
etd->active_count = 1;
|
|
writel(etd_mask, imx21->regs + USBH_ETDENSET);
|
|
return;
|
|
|
|
err_bounce_map:
|
|
kfree(etd->bounce_buffer);
|
|
|
|
err_bounce_alloc:
|
|
free_dmem(imx21, etd);
|
|
nonisoc_urb_completed_for_etd(imx21, etd, -ENOMEM);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Data memory management */
|
|
/* =========================================== */
|
|
|
|
static int alloc_dmem(struct imx21 *imx21, unsigned int size,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
unsigned int offset = 0;
|
|
struct imx21_dmem_area *area;
|
|
struct imx21_dmem_area *tmp;
|
|
|
|
size += (~size + 1) & 0x3; /* Round to 4 byte multiple */
|
|
|
|
if (size > DMEM_SIZE) {
|
|
dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n",
|
|
size, DMEM_SIZE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
list_for_each_entry(tmp, &imx21->dmem_list, list) {
|
|
if ((size + offset) < offset)
|
|
goto fail;
|
|
if ((size + offset) <= tmp->offset)
|
|
break;
|
|
offset = tmp->size + tmp->offset;
|
|
if ((offset + size) > DMEM_SIZE)
|
|
goto fail;
|
|
}
|
|
|
|
area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC);
|
|
if (area == NULL)
|
|
return -ENOMEM;
|
|
|
|
area->ep = ep;
|
|
area->offset = offset;
|
|
area->size = size;
|
|
list_add_tail(&area->list, &tmp->list);
|
|
debug_dmem_allocated(imx21, size);
|
|
return offset;
|
|
|
|
fail:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Memory now available for a queued ETD - activate it */
|
|
static void activate_queued_etd(struct imx21 *imx21,
|
|
struct etd_priv *etd, u32 dmem_offset)
|
|
{
|
|
struct urb_priv *urb_priv = etd->urb->hcpriv;
|
|
int etd_num = etd - &imx21->etd[0];
|
|
u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD;
|
|
u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03;
|
|
|
|
dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n",
|
|
etd_num);
|
|
etd_writel(imx21, etd_num, 1,
|
|
((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset);
|
|
|
|
etd->dmem_offset = dmem_offset;
|
|
urb_priv->active = 1;
|
|
activate_etd(imx21, etd_num, dir);
|
|
}
|
|
|
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd)
|
|
{
|
|
struct imx21_dmem_area *area;
|
|
struct etd_priv *tmp;
|
|
int found = 0;
|
|
int offset;
|
|
|
|
if (!etd->dmem_size)
|
|
return;
|
|
etd->dmem_size = 0;
|
|
|
|
offset = etd->dmem_offset;
|
|
list_for_each_entry(area, &imx21->dmem_list, list) {
|
|
if (area->offset == offset) {
|
|
debug_dmem_freed(imx21, area->size);
|
|
list_del(&area->list);
|
|
kfree(area);
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
dev_err(imx21->dev,
|
|
"Trying to free unallocated DMEM %d\n", offset);
|
|
return;
|
|
}
|
|
|
|
/* Try again to allocate memory for anything we've queued */
|
|
list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) {
|
|
offset = alloc_dmem(imx21, etd->dmem_size, etd->ep);
|
|
if (offset >= 0) {
|
|
list_del(&etd->queue);
|
|
activate_queued_etd(imx21, etd, (u32)offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21_dmem_area *area, *tmp;
|
|
|
|
list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) {
|
|
if (area->ep == ep) {
|
|
dev_err(imx21->dev,
|
|
"Active DMEM %d for disabled ep=%p\n",
|
|
area->offset, ep);
|
|
list_del(&area->list);
|
|
kfree(area);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* End handling */
|
|
/* =========================================== */
|
|
|
|
/* Endpoint now idle - release its ETD(s) or assign to queued request */
|
|
static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
int etd_num = ep_priv->etd[i];
|
|
struct etd_priv *etd;
|
|
if (etd_num < 0)
|
|
continue;
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
ep_priv->etd[i] = -1;
|
|
|
|
free_dmem(imx21, etd); /* for isoc */
|
|
|
|
if (list_empty(&imx21->queue_for_etd)) {
|
|
free_etd(imx21, etd_num);
|
|
continue;
|
|
}
|
|
|
|
dev_dbg(imx21->dev,
|
|
"assigning idle etd %d for queued request\n", etd_num);
|
|
ep_priv = list_first_entry(&imx21->queue_for_etd,
|
|
struct ep_priv, queue);
|
|
list_del(&ep_priv->queue);
|
|
reset_etd(imx21, etd_num);
|
|
ep_priv->waiting_etd = 0;
|
|
ep_priv->etd[i] = etd_num;
|
|
|
|
if (list_empty(&ep_priv->ep->urb_list)) {
|
|
dev_err(imx21->dev, "No urb for queued ep!\n");
|
|
continue;
|
|
}
|
|
schedule_nonisoc_etd(imx21, list_first_entry(
|
|
&ep_priv->ep->urb_list, struct urb, urb_list));
|
|
}
|
|
}
|
|
|
|
static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
__releases(imx21->lock)
|
|
__acquires(imx21->lock)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct ep_priv *ep_priv = urb->ep->hcpriv;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
|
|
debug_urb_completed(imx21, urb, status);
|
|
dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status);
|
|
|
|
kfree(urb_priv->isoc_td);
|
|
kfree(urb->hcpriv);
|
|
urb->hcpriv = NULL;
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
spin_unlock(&imx21->lock);
|
|
usb_hcd_giveback_urb(hcd, urb, status);
|
|
spin_lock(&imx21->lock);
|
|
if (list_empty(&ep_priv->ep->urb_list))
|
|
ep_idle(imx21, ep_priv);
|
|
}
|
|
|
|
static void nonisoc_urb_completed_for_etd(
|
|
struct imx21 *imx21, struct etd_priv *etd, int status)
|
|
{
|
|
struct usb_host_endpoint *ep = etd->ep;
|
|
|
|
urb_done(imx21->hcd, etd->urb, status);
|
|
etd->urb = NULL;
|
|
|
|
if (!list_empty(&ep->urb_list)) {
|
|
struct urb *urb = list_first_entry(
|
|
&ep->urb_list, struct urb, urb_list);
|
|
|
|
dev_vdbg(imx21->dev, "next URB %p\n", urb);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
}
|
|
|
|
|
|
/* =========================================== */
|
|
/* ISOC Handling ... */
|
|
/* =========================================== */
|
|
|
|
static void schedule_isoc_etds(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct ep_priv *ep_priv = ep->hcpriv;
|
|
struct etd_priv *etd;
|
|
struct urb_priv *urb_priv;
|
|
struct td *td;
|
|
int etd_num;
|
|
int i;
|
|
int cur_frame;
|
|
u8 dir;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
too_late:
|
|
if (list_empty(&ep_priv->td_list))
|
|
break;
|
|
|
|
etd_num = ep_priv->etd[i];
|
|
if (etd_num < 0)
|
|
break;
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
if (etd->urb)
|
|
continue;
|
|
|
|
td = list_entry(ep_priv->td_list.next, struct td, list);
|
|
list_del(&td->list);
|
|
urb_priv = td->urb->hcpriv;
|
|
|
|
cur_frame = imx21_hc_get_frame(hcd);
|
|
if (frame_after(cur_frame, td->frame)) {
|
|
dev_dbg(imx21->dev, "isoc too late frame %d > %d\n",
|
|
cur_frame, td->frame);
|
|
urb_priv->isoc_status = -EXDEV;
|
|
td->urb->iso_frame_desc[
|
|
td->isoc_index].actual_length = 0;
|
|
td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV;
|
|
if (--urb_priv->isoc_remaining == 0)
|
|
urb_done(hcd, td->urb, urb_priv->isoc_status);
|
|
goto too_late;
|
|
}
|
|
|
|
urb_priv->active = 1;
|
|
etd->td = td;
|
|
etd->ep = td->ep;
|
|
etd->urb = td->urb;
|
|
etd->len = td->len;
|
|
etd->dma_handle = td->dma_handle;
|
|
etd->cpu_buffer = td->cpu_buffer;
|
|
|
|
debug_isoc_submitted(imx21, cur_frame, td);
|
|
|
|
dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN;
|
|
setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size);
|
|
etd_writel(imx21, etd_num, 1, etd->dmem_offset);
|
|
etd_writel(imx21, etd_num, 2,
|
|
(TD_NOTACCESSED << DW2_COMPCODE) |
|
|
((td->frame & 0xFFFF) << DW2_STARTFRM));
|
|
etd_writel(imx21, etd_num, 3,
|
|
(TD_NOTACCESSED << DW3_COMPCODE0) |
|
|
(td->len << DW3_PKTLEN0));
|
|
|
|
activate_etd(imx21, etd_num, dir);
|
|
}
|
|
}
|
|
|
|
static void isoc_etd_done(struct usb_hcd *hcd, int etd_num)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int etd_mask = 1 << etd_num;
|
|
struct etd_priv *etd = imx21->etd + etd_num;
|
|
struct urb *urb = etd->urb;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct td *td = etd->td;
|
|
struct usb_host_endpoint *ep = etd->ep;
|
|
int isoc_index = td->isoc_index;
|
|
unsigned int pipe = urb->pipe;
|
|
int dir_in = usb_pipein(pipe);
|
|
int cc;
|
|
int bytes_xfrd;
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
|
|
cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf;
|
|
bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff;
|
|
|
|
/* Input doesn't always fill the buffer, don't generate an error
|
|
* when this happens.
|
|
*/
|
|
if (dir_in && (cc == TD_DATAUNDERRUN))
|
|
cc = TD_CC_NOERROR;
|
|
|
|
if (cc == TD_NOTACCESSED)
|
|
bytes_xfrd = 0;
|
|
|
|
debug_isoc_completed(imx21,
|
|
imx21_hc_get_frame(hcd), td, cc, bytes_xfrd);
|
|
if (cc) {
|
|
urb_priv->isoc_status = -EXDEV;
|
|
dev_dbg(imx21->dev,
|
|
"bad iso cc=0x%X frame=%d sched frame=%d "
|
|
"cnt=%d len=%d urb=%p etd=%d index=%d\n",
|
|
cc, imx21_hc_get_frame(hcd), td->frame,
|
|
bytes_xfrd, td->len, urb, etd_num, isoc_index);
|
|
}
|
|
|
|
if (dir_in) {
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
if (!etd->dma_handle)
|
|
memcpy_fromio(etd->cpu_buffer,
|
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset,
|
|
bytes_xfrd);
|
|
}
|
|
|
|
urb->actual_length += bytes_xfrd;
|
|
urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd;
|
|
urb->iso_frame_desc[isoc_index].status = cc_to_error[cc];
|
|
|
|
etd->td = NULL;
|
|
etd->urb = NULL;
|
|
etd->ep = NULL;
|
|
|
|
if (--urb_priv->isoc_remaining == 0)
|
|
urb_done(hcd, urb, urb_priv->isoc_status);
|
|
|
|
schedule_isoc_etds(hcd, ep);
|
|
}
|
|
|
|
static struct ep_priv *alloc_isoc_ep(
|
|
struct imx21 *imx21, struct usb_host_endpoint *ep)
|
|
{
|
|
struct ep_priv *ep_priv;
|
|
int i;
|
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
|
|
if (!ep_priv)
|
|
return NULL;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++)
|
|
ep_priv->etd[i] = -1;
|
|
|
|
INIT_LIST_HEAD(&ep_priv->td_list);
|
|
ep_priv->ep = ep;
|
|
ep->hcpriv = ep_priv;
|
|
return ep_priv;
|
|
}
|
|
|
|
static int alloc_isoc_etds(struct imx21 *imx21, struct ep_priv *ep_priv)
|
|
{
|
|
int i, j;
|
|
int etd_num;
|
|
|
|
/* Allocate the ETDs if required */
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
if (ep_priv->etd[i] < 0) {
|
|
etd_num = alloc_etd(imx21);
|
|
if (etd_num < 0)
|
|
goto alloc_etd_failed;
|
|
|
|
ep_priv->etd[i] = etd_num;
|
|
imx21->etd[etd_num].ep = ep_priv->ep;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
alloc_etd_failed:
|
|
dev_err(imx21->dev, "isoc: Couldn't allocate etd\n");
|
|
for (j = 0; j < i; j++) {
|
|
free_etd(imx21, ep_priv->etd[j]);
|
|
ep_priv->etd[j] = -1;
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep,
|
|
struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct urb_priv *urb_priv;
|
|
unsigned long flags;
|
|
struct ep_priv *ep_priv;
|
|
struct td *td = NULL;
|
|
int i;
|
|
int ret;
|
|
int cur_frame;
|
|
u16 maxpacket;
|
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
|
|
if (urb_priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
urb_priv->isoc_td = kzalloc(
|
|
sizeof(struct td) * urb->number_of_packets, mem_flags);
|
|
if (urb_priv->isoc_td == NULL) {
|
|
ret = -ENOMEM;
|
|
goto alloc_td_failed;
|
|
}
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
if (ep->hcpriv == NULL) {
|
|
ep_priv = alloc_isoc_ep(imx21, ep);
|
|
if (ep_priv == NULL) {
|
|
ret = -ENOMEM;
|
|
goto alloc_ep_failed;
|
|
}
|
|
} else {
|
|
ep_priv = ep->hcpriv;
|
|
}
|
|
|
|
ret = alloc_isoc_etds(imx21, ep_priv);
|
|
if (ret)
|
|
goto alloc_etd_failed;
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto link_failed;
|
|
|
|
urb->status = -EINPROGRESS;
|
|
urb->actual_length = 0;
|
|
urb->error_count = 0;
|
|
urb->hcpriv = urb_priv;
|
|
urb_priv->ep = ep;
|
|
|
|
/* allocate data memory for largest packets if not already done */
|
|
maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]];
|
|
|
|
if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) {
|
|
/* not sure if this can really occur.... */
|
|
dev_err(imx21->dev, "increasing isoc buffer %d->%d\n",
|
|
etd->dmem_size, maxpacket);
|
|
ret = -EMSGSIZE;
|
|
goto alloc_dmem_failed;
|
|
}
|
|
|
|
if (etd->dmem_size == 0) {
|
|
etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep);
|
|
if (etd->dmem_offset < 0) {
|
|
dev_dbg(imx21->dev, "failed alloc isoc dmem\n");
|
|
ret = -EAGAIN;
|
|
goto alloc_dmem_failed;
|
|
}
|
|
etd->dmem_size = maxpacket;
|
|
}
|
|
}
|
|
|
|
/* calculate frame */
|
|
cur_frame = imx21_hc_get_frame(hcd);
|
|
i = 0;
|
|
if (list_empty(&ep_priv->td_list)) {
|
|
urb->start_frame = wrap_frame(cur_frame + 5);
|
|
} else {
|
|
urb->start_frame = wrap_frame(list_entry(ep_priv->td_list.prev,
|
|
struct td, list)->frame + urb->interval);
|
|
|
|
if (frame_after(cur_frame, urb->start_frame)) {
|
|
dev_dbg(imx21->dev,
|
|
"enqueue: adjusting iso start %d (cur=%d) asap=%d\n",
|
|
urb->start_frame, cur_frame,
|
|
(urb->transfer_flags & URB_ISO_ASAP) != 0);
|
|
i = DIV_ROUND_UP(wrap_frame(
|
|
cur_frame - urb->start_frame),
|
|
urb->interval);
|
|
|
|
/* Treat underruns as if URB_ISO_ASAP was set */
|
|
if ((urb->transfer_flags & URB_ISO_ASAP) ||
|
|
i >= urb->number_of_packets) {
|
|
urb->start_frame = wrap_frame(urb->start_frame
|
|
+ i * urb->interval);
|
|
i = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* set up transfers */
|
|
urb_priv->isoc_remaining = urb->number_of_packets - i;
|
|
td = urb_priv->isoc_td;
|
|
for (; i < urb->number_of_packets; i++, td++) {
|
|
unsigned int offset = urb->iso_frame_desc[i].offset;
|
|
td->ep = ep;
|
|
td->urb = urb;
|
|
td->len = urb->iso_frame_desc[i].length;
|
|
td->isoc_index = i;
|
|
td->frame = wrap_frame(urb->start_frame + urb->interval * i);
|
|
td->dma_handle = urb->transfer_dma + offset;
|
|
td->cpu_buffer = urb->transfer_buffer + offset;
|
|
list_add_tail(&td->list, &ep_priv->td_list);
|
|
}
|
|
|
|
dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n",
|
|
urb->number_of_packets, urb->start_frame, td->frame);
|
|
|
|
debug_urb_submitted(imx21, urb);
|
|
schedule_isoc_etds(hcd, ep);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
alloc_dmem_failed:
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
|
|
link_failed:
|
|
alloc_etd_failed:
|
|
alloc_ep_failed:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
kfree(urb_priv->isoc_td);
|
|
|
|
alloc_td_failed:
|
|
kfree(urb_priv);
|
|
return ret;
|
|
}
|
|
|
|
static void dequeue_isoc_urb(struct imx21 *imx21,
|
|
struct urb *urb, struct ep_priv *ep_priv)
|
|
{
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct td *td, *tmp;
|
|
int i;
|
|
|
|
if (urb_priv->active) {
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
int etd_num = ep_priv->etd[i];
|
|
if (etd_num != -1 && imx21->etd[etd_num].urb == urb) {
|
|
struct etd_priv *etd = imx21->etd + etd_num;
|
|
|
|
reset_etd(imx21, etd_num);
|
|
free_dmem(imx21, etd);
|
|
}
|
|
}
|
|
}
|
|
|
|
list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) {
|
|
if (td->urb == urb) {
|
|
dev_vdbg(imx21->dev, "removing td %p\n", td);
|
|
list_del(&td->list);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* NON ISOC Handling ... */
|
|
/* =========================================== */
|
|
|
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb)
|
|
{
|
|
unsigned int pipe = urb->pipe;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct ep_priv *ep_priv = urb_priv->ep->hcpriv;
|
|
int state = urb_priv->state;
|
|
int etd_num = ep_priv->etd[0];
|
|
struct etd_priv *etd;
|
|
u32 count;
|
|
u16 etd_buf_size;
|
|
u16 maxpacket;
|
|
u8 dir;
|
|
u8 bufround;
|
|
u8 datatoggle;
|
|
u8 interval = 0;
|
|
u8 relpolpos = 0;
|
|
|
|
if (etd_num < 0) {
|
|
dev_err(imx21->dev, "No valid ETD\n");
|
|
return;
|
|
}
|
|
if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num))
|
|
dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num);
|
|
|
|
etd = &imx21->etd[etd_num];
|
|
maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe));
|
|
if (!maxpacket)
|
|
maxpacket = 8;
|
|
|
|
if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) {
|
|
if (state == US_CTRL_SETUP) {
|
|
dir = TD_DIR_SETUP;
|
|
if (unsuitable_for_dma(urb->setup_dma))
|
|
usb_hcd_unmap_urb_setup_for_dma(imx21->hcd,
|
|
urb);
|
|
etd->dma_handle = urb->setup_dma;
|
|
etd->cpu_buffer = urb->setup_packet;
|
|
bufround = 0;
|
|
count = 8;
|
|
datatoggle = TD_TOGGLE_DATA0;
|
|
} else { /* US_CTRL_ACK */
|
|
dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT;
|
|
bufround = 0;
|
|
count = 0;
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
}
|
|
} else {
|
|
dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN;
|
|
bufround = (dir == TD_DIR_IN) ? 1 : 0;
|
|
if (unsuitable_for_dma(urb->transfer_dma))
|
|
usb_hcd_unmap_urb_for_dma(imx21->hcd, urb);
|
|
|
|
etd->dma_handle = urb->transfer_dma;
|
|
etd->cpu_buffer = urb->transfer_buffer;
|
|
if (usb_pipebulk(pipe) && (state == US_BULK0))
|
|
count = 0;
|
|
else
|
|
count = urb->transfer_buffer_length;
|
|
|
|
if (usb_pipecontrol(pipe)) {
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
} else {
|
|
if (usb_gettoggle(
|
|
urb->dev,
|
|
usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe)))
|
|
datatoggle = TD_TOGGLE_DATA1;
|
|
else
|
|
datatoggle = TD_TOGGLE_DATA0;
|
|
}
|
|
}
|
|
|
|
etd->urb = urb;
|
|
etd->ep = urb_priv->ep;
|
|
etd->len = count;
|
|
|
|
if (usb_pipeint(pipe)) {
|
|
interval = urb->interval;
|
|
relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff;
|
|
}
|
|
|
|
/* Write ETD to device memory */
|
|
setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket);
|
|
|
|
etd_writel(imx21, etd_num, 2,
|
|
(u32) interval << DW2_POLINTERV |
|
|
((u32) relpolpos << DW2_RELPOLPOS) |
|
|
((u32) dir << DW2_DIRPID) |
|
|
((u32) bufround << DW2_BUFROUND) |
|
|
((u32) datatoggle << DW2_DATATOG) |
|
|
((u32) TD_NOTACCESSED << DW2_COMPCODE));
|
|
|
|
/* DMA will always transfer buffer size even if TOBYCNT in DWORD3
|
|
is smaller. Make sure we don't overrun the buffer!
|
|
*/
|
|
if (count && count < maxpacket)
|
|
etd_buf_size = count;
|
|
else
|
|
etd_buf_size = maxpacket;
|
|
|
|
etd_writel(imx21, etd_num, 3,
|
|
((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count);
|
|
|
|
if (!count)
|
|
etd->dma_handle = 0;
|
|
|
|
/* allocate x and y buffer space at once */
|
|
etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket;
|
|
etd->dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep);
|
|
if (etd->dmem_offset < 0) {
|
|
/* Setup everything we can in HW and update when we get DMEM */
|
|
etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16);
|
|
|
|
dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num);
|
|
debug_urb_queued_for_dmem(imx21, urb);
|
|
list_add_tail(&etd->queue, &imx21->queue_for_dmem);
|
|
return;
|
|
}
|
|
|
|
etd_writel(imx21, etd_num, 1,
|
|
(((u32) etd->dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) |
|
|
(u32) etd->dmem_offset);
|
|
|
|
urb_priv->active = 1;
|
|
|
|
/* enable the ETD to kick off transfer */
|
|
dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n",
|
|
etd_num, count, dir != TD_DIR_IN ? "out" : "in");
|
|
activate_etd(imx21, etd_num, dir);
|
|
|
|
}
|
|
|
|
static void nonisoc_etd_done(struct usb_hcd *hcd, int etd_num)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
struct urb *urb = etd->urb;
|
|
u32 etd_mask = 1 << etd_num;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
int dir;
|
|
int cc;
|
|
u32 bytes_xfrd;
|
|
int etd_done;
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
|
|
dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3;
|
|
cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf;
|
|
bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff);
|
|
|
|
/* save toggle carry */
|
|
usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe),
|
|
(etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1);
|
|
|
|
if (dir == TD_DIR_IN) {
|
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
|
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
|
|
|
|
if (etd->bounce_buffer) {
|
|
memcpy(etd->cpu_buffer, etd->bounce_buffer, bytes_xfrd);
|
|
dma_unmap_single(imx21->dev,
|
|
etd->dma_handle, etd->len, DMA_FROM_DEVICE);
|
|
} else if (!etd->dma_handle && bytes_xfrd) {/* PIO */
|
|
memcpy_fromio(etd->cpu_buffer,
|
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset,
|
|
bytes_xfrd);
|
|
}
|
|
}
|
|
|
|
kfree(etd->bounce_buffer);
|
|
etd->bounce_buffer = NULL;
|
|
free_dmem(imx21, etd);
|
|
|
|
urb->error_count = 0;
|
|
if (!(urb->transfer_flags & URB_SHORT_NOT_OK)
|
|
&& (cc == TD_DATAUNDERRUN))
|
|
cc = TD_CC_NOERROR;
|
|
|
|
if (cc != 0)
|
|
dev_vdbg(imx21->dev, "cc is 0x%x\n", cc);
|
|
|
|
etd_done = (cc_to_error[cc] != 0); /* stop if error */
|
|
|
|
switch (usb_pipetype(urb->pipe)) {
|
|
case PIPE_CONTROL:
|
|
switch (urb_priv->state) {
|
|
case US_CTRL_SETUP:
|
|
if (urb->transfer_buffer_length > 0)
|
|
urb_priv->state = US_CTRL_DATA;
|
|
else
|
|
urb_priv->state = US_CTRL_ACK;
|
|
break;
|
|
case US_CTRL_DATA:
|
|
urb->actual_length += bytes_xfrd;
|
|
urb_priv->state = US_CTRL_ACK;
|
|
break;
|
|
case US_CTRL_ACK:
|
|
etd_done = 1;
|
|
break;
|
|
default:
|
|
dev_err(imx21->dev,
|
|
"Invalid pipe state %d\n", urb_priv->state);
|
|
etd_done = 1;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case PIPE_BULK:
|
|
urb->actual_length += bytes_xfrd;
|
|
if ((urb_priv->state == US_BULK)
|
|
&& (urb->transfer_flags & URB_ZERO_PACKET)
|
|
&& urb->transfer_buffer_length > 0
|
|
&& ((urb->transfer_buffer_length %
|
|
usb_maxpacket(urb->dev, urb->pipe,
|
|
usb_pipeout(urb->pipe))) == 0)) {
|
|
/* need a 0-packet */
|
|
urb_priv->state = US_BULK0;
|
|
} else {
|
|
etd_done = 1;
|
|
}
|
|
break;
|
|
|
|
case PIPE_INTERRUPT:
|
|
urb->actual_length += bytes_xfrd;
|
|
etd_done = 1;
|
|
break;
|
|
}
|
|
|
|
if (etd_done)
|
|
nonisoc_urb_completed_for_etd(imx21, etd, cc_to_error[cc]);
|
|
else {
|
|
dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
}
|
|
|
|
|
|
static struct ep_priv *alloc_ep(void)
|
|
{
|
|
int i;
|
|
struct ep_priv *ep_priv;
|
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
|
|
if (!ep_priv)
|
|
return NULL;
|
|
|
|
for (i = 0; i < NUM_ISO_ETDS; ++i)
|
|
ep_priv->etd[i] = -1;
|
|
|
|
return ep_priv;
|
|
}
|
|
|
|
static int imx21_hc_urb_enqueue(struct usb_hcd *hcd,
|
|
struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct usb_host_endpoint *ep = urb->ep;
|
|
struct urb_priv *urb_priv;
|
|
struct ep_priv *ep_priv;
|
|
struct etd_priv *etd;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
dev_vdbg(imx21->dev,
|
|
"enqueue urb=%p ep=%p len=%d "
|
|
"buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n",
|
|
urb, ep,
|
|
urb->transfer_buffer_length,
|
|
urb->transfer_buffer, urb->transfer_dma,
|
|
urb->setup_packet, urb->setup_dma);
|
|
|
|
if (usb_pipeisoc(urb->pipe))
|
|
return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags);
|
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
|
|
if (!urb_priv)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
ep_priv = ep->hcpriv;
|
|
if (ep_priv == NULL) {
|
|
ep_priv = alloc_ep();
|
|
if (!ep_priv) {
|
|
ret = -ENOMEM;
|
|
goto failed_alloc_ep;
|
|
}
|
|
ep->hcpriv = ep_priv;
|
|
ep_priv->ep = ep;
|
|
}
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto failed_link;
|
|
|
|
urb->status = -EINPROGRESS;
|
|
urb->actual_length = 0;
|
|
urb->error_count = 0;
|
|
urb->hcpriv = urb_priv;
|
|
urb_priv->ep = ep;
|
|
|
|
switch (usb_pipetype(urb->pipe)) {
|
|
case PIPE_CONTROL:
|
|
urb_priv->state = US_CTRL_SETUP;
|
|
break;
|
|
case PIPE_BULK:
|
|
urb_priv->state = US_BULK;
|
|
break;
|
|
}
|
|
|
|
debug_urb_submitted(imx21, urb);
|
|
if (ep_priv->etd[0] < 0) {
|
|
if (ep_priv->waiting_etd) {
|
|
dev_dbg(imx21->dev,
|
|
"no ETD available already queued %p\n",
|
|
ep_priv);
|
|
debug_urb_queued_for_etd(imx21, urb);
|
|
goto out;
|
|
}
|
|
ep_priv->etd[0] = alloc_etd(imx21);
|
|
if (ep_priv->etd[0] < 0) {
|
|
dev_dbg(imx21->dev,
|
|
"no ETD available queueing %p\n", ep_priv);
|
|
debug_urb_queued_for_etd(imx21, urb);
|
|
list_add_tail(&ep_priv->queue, &imx21->queue_for_etd);
|
|
ep_priv->waiting_etd = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Schedule if no URB already active for this endpoint */
|
|
etd = &imx21->etd[ep_priv->etd[0]];
|
|
if (etd->urb == NULL) {
|
|
DEBUG_LOG_FRAME(imx21, etd, last_req);
|
|
schedule_nonisoc_etd(imx21, urb);
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
failed_link:
|
|
failed_alloc_ep:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
kfree(urb_priv);
|
|
return ret;
|
|
}
|
|
|
|
static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
|
|
int status)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
struct usb_host_endpoint *ep;
|
|
struct ep_priv *ep_priv;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
int ret = -EINVAL;
|
|
|
|
dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n",
|
|
urb, usb_pipeisoc(urb->pipe), status);
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (ret)
|
|
goto fail;
|
|
ep = urb_priv->ep;
|
|
ep_priv = ep->hcpriv;
|
|
|
|
debug_urb_unlinked(imx21, urb);
|
|
|
|
if (usb_pipeisoc(urb->pipe)) {
|
|
dequeue_isoc_urb(imx21, urb, ep_priv);
|
|
schedule_isoc_etds(hcd, ep);
|
|
} else if (urb_priv->active) {
|
|
int etd_num = ep_priv->etd[0];
|
|
if (etd_num != -1) {
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
disactivate_etd(imx21, etd_num);
|
|
free_dmem(imx21, etd);
|
|
etd->urb = NULL;
|
|
kfree(etd->bounce_buffer);
|
|
etd->bounce_buffer = NULL;
|
|
}
|
|
}
|
|
|
|
urb_done(hcd, urb, status);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
|
|
fail:
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Interrupt dispatch */
|
|
/* =========================================== */
|
|
|
|
static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
|
|
{
|
|
int etd_num;
|
|
int enable_sof_int = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) {
|
|
u32 etd_mask = 1 << etd_num;
|
|
u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask;
|
|
u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask;
|
|
struct etd_priv *etd = &imx21->etd[etd_num];
|
|
|
|
|
|
if (done) {
|
|
DEBUG_LOG_FRAME(imx21, etd, last_int);
|
|
} else {
|
|
/*
|
|
* Kludge warning!
|
|
*
|
|
* When multiple transfers are using the bus we sometimes get into a state
|
|
* where the transfer has completed (the CC field of the ETD is != 0x0F),
|
|
* the ETD has self disabled but the ETDDONESTAT flag is not set
|
|
* (and hence no interrupt occurs).
|
|
* This causes the transfer in question to hang.
|
|
* The kludge below checks for this condition at each SOF and processes any
|
|
* blocked ETDs (after an arbitrary 10 frame wait)
|
|
*
|
|
* With a single active transfer the usbtest test suite will run for days
|
|
* without the kludge.
|
|
* With other bus activity (eg mass storage) even just test1 will hang without
|
|
* the kludge.
|
|
*/
|
|
u32 dword0;
|
|
int cc;
|
|
|
|
if (etd->active_count && !enabled) /* suspicious... */
|
|
enable_sof_int = 1;
|
|
|
|
if (!sof || enabled || !etd->active_count)
|
|
continue;
|
|
|
|
cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE;
|
|
if (cc == TD_NOTACCESSED)
|
|
continue;
|
|
|
|
if (++etd->active_count < 10)
|
|
continue;
|
|
|
|
dword0 = etd_readl(imx21, etd_num, 0);
|
|
dev_dbg(imx21->dev,
|
|
"unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n",
|
|
etd_num, dword0 & 0x7F,
|
|
(dword0 >> DW0_ENDPNT) & 0x0F,
|
|
cc);
|
|
|
|
#ifdef DEBUG
|
|
dev_dbg(imx21->dev,
|
|
"frame: act=%d disact=%d"
|
|
" int=%d req=%d cur=%d\n",
|
|
etd->activated_frame,
|
|
etd->disactivated_frame,
|
|
etd->last_int_frame,
|
|
etd->last_req_frame,
|
|
readl(imx21->regs + USBH_FRMNUB));
|
|
imx21->debug_unblocks++;
|
|
#endif
|
|
etd->active_count = 0;
|
|
/* End of kludge */
|
|
}
|
|
|
|
if (etd->ep == NULL || etd->urb == NULL) {
|
|
dev_dbg(imx21->dev,
|
|
"Interrupt for unexpected etd %d"
|
|
" ep=%p urb=%p\n",
|
|
etd_num, etd->ep, etd->urb);
|
|
disactivate_etd(imx21, etd_num);
|
|
continue;
|
|
}
|
|
|
|
if (usb_pipeisoc(etd->urb->pipe))
|
|
isoc_etd_done(hcd, etd_num);
|
|
else
|
|
nonisoc_etd_done(hcd, etd_num);
|
|
}
|
|
|
|
/* only enable SOF interrupt if it may be needed for the kludge */
|
|
if (enable_sof_int)
|
|
set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
|
|
else
|
|
clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
|
|
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t imx21_irq(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
u32 ints = readl(imx21->regs + USBH_SYSISR);
|
|
|
|
if (ints & USBH_SYSIEN_HERRINT)
|
|
dev_dbg(imx21->dev, "Scheduling error\n");
|
|
|
|
if (ints & USBH_SYSIEN_SORINT)
|
|
dev_dbg(imx21->dev, "Scheduling overrun\n");
|
|
|
|
if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT))
|
|
process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT);
|
|
|
|
writel(ints, imx21->regs + USBH_SYSISR);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void imx21_hc_endpoint_disable(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
struct ep_priv *ep_priv;
|
|
int i;
|
|
|
|
if (ep == NULL)
|
|
return;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
ep_priv = ep->hcpriv;
|
|
dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv);
|
|
|
|
if (!list_empty(&ep->urb_list))
|
|
dev_dbg(imx21->dev, "ep's URB list is not empty\n");
|
|
|
|
if (ep_priv != NULL) {
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) {
|
|
if (ep_priv->etd[i] > -1)
|
|
dev_dbg(imx21->dev, "free etd %d for disable\n",
|
|
ep_priv->etd[i]);
|
|
|
|
free_etd(imx21, ep_priv->etd[i]);
|
|
}
|
|
kfree(ep_priv);
|
|
ep->hcpriv = NULL;
|
|
}
|
|
|
|
for (i = 0; i < USB_NUM_ETD; i++) {
|
|
if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) {
|
|
dev_err(imx21->dev,
|
|
"Active etd %d for disabled ep=%p!\n", i, ep);
|
|
free_etd(imx21, i);
|
|
}
|
|
}
|
|
free_epdmem(imx21, ep);
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Hub handling */
|
|
/* =========================================== */
|
|
|
|
static int get_hub_descriptor(struct usb_hcd *hcd,
|
|
struct usb_hub_descriptor *desc)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
desc->bDescriptorType = 0x29; /* HUB descriptor */
|
|
desc->bHubContrCurrent = 0;
|
|
|
|
desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA)
|
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK;
|
|
desc->bDescLength = 9;
|
|
desc->bPwrOn2PwrGood = 0;
|
|
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(
|
|
0x0002 | /* No power switching */
|
|
0x0010 | /* No over current protection */
|
|
0);
|
|
|
|
desc->u.hs.DeviceRemovable[0] = 1 << 1;
|
|
desc->u.hs.DeviceRemovable[1] = ~0;
|
|
return 0;
|
|
}
|
|
|
|
static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int ports;
|
|
int changed = 0;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
ports = readl(imx21->regs + USBH_ROOTHUBA)
|
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK;
|
|
if (ports > 7) {
|
|
ports = 7;
|
|
dev_err(imx21->dev, "ports %d > 7\n", ports);
|
|
}
|
|
for (i = 0; i < ports; i++) {
|
|
if (readl(imx21->regs + USBH_PORTSTAT(i)) &
|
|
(USBH_PORTSTAT_CONNECTSC |
|
|
USBH_PORTSTAT_PRTENBLSC |
|
|
USBH_PORTSTAT_PRTSTATSC |
|
|
USBH_PORTSTAT_OVRCURIC |
|
|
USBH_PORTSTAT_PRTRSTSC)) {
|
|
|
|
changed = 1;
|
|
buf[0] |= 1 << (i + 1);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
|
|
if (changed)
|
|
dev_info(imx21->dev, "Hub status changed\n");
|
|
return changed;
|
|
}
|
|
|
|
static int imx21_hc_hub_control(struct usb_hcd *hcd,
|
|
u16 typeReq,
|
|
u16 wValue, u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
int rc = 0;
|
|
u32 status_write = 0;
|
|
|
|
switch (typeReq) {
|
|
case ClearHubFeature:
|
|
dev_dbg(imx21->dev, "ClearHubFeature\n");
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " OVER_CURRENT\n");
|
|
break;
|
|
case C_HUB_LOCAL_POWER:
|
|
dev_dbg(imx21->dev, " LOCAL_POWER\n");
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case ClearPortFeature:
|
|
dev_dbg(imx21->dev, "ClearPortFeature\n");
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
dev_dbg(imx21->dev, " ENABLE\n");
|
|
status_write = USBH_PORTSTAT_CURCONST;
|
|
break;
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
dev_dbg(imx21->dev, " SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTOVRCURI;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
dev_dbg(imx21->dev, " POWER\n");
|
|
status_write = USBH_PORTSTAT_LSDEVCON;
|
|
break;
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
dev_dbg(imx21->dev, " C_ENABLE\n");
|
|
status_write = USBH_PORTSTAT_PRTENBLSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
dev_dbg(imx21->dev, " C_SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTSTATSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
dev_dbg(imx21->dev, " C_CONNECTION\n");
|
|
status_write = USBH_PORTSTAT_CONNECTSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " C_OVER_CURRENT\n");
|
|
status_write = USBH_PORTSTAT_OVRCURIC;
|
|
break;
|
|
case USB_PORT_FEAT_C_RESET:
|
|
dev_dbg(imx21->dev, " C_RESET\n");
|
|
status_write = USBH_PORTSTAT_PRTRSTSC;
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case GetHubDescriptor:
|
|
dev_dbg(imx21->dev, "GetHubDescriptor\n");
|
|
rc = get_hub_descriptor(hcd, (void *)buf);
|
|
break;
|
|
|
|
case GetHubStatus:
|
|
dev_dbg(imx21->dev, " GetHubStatus\n");
|
|
*(__le32 *) buf = 0;
|
|
break;
|
|
|
|
case GetPortStatus:
|
|
dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n",
|
|
wIndex, USBH_PORTSTAT(wIndex - 1));
|
|
*(__le32 *) buf = readl(imx21->regs +
|
|
USBH_PORTSTAT(wIndex - 1));
|
|
break;
|
|
|
|
case SetHubFeature:
|
|
dev_dbg(imx21->dev, "SetHubFeature\n");
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
dev_dbg(imx21->dev, " OVER_CURRENT\n");
|
|
break;
|
|
|
|
case C_HUB_LOCAL_POWER:
|
|
dev_dbg(imx21->dev, " LOCAL_POWER\n");
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case SetPortFeature:
|
|
dev_dbg(imx21->dev, "SetPortFeature\n");
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
dev_dbg(imx21->dev, " SUSPEND\n");
|
|
status_write = USBH_PORTSTAT_PRTSUSPST;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
dev_dbg(imx21->dev, " POWER\n");
|
|
status_write = USBH_PORTSTAT_PRTPWRST;
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
dev_dbg(imx21->dev, " RESET\n");
|
|
status_write = USBH_PORTSTAT_PRTRSTST;
|
|
break;
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_dbg(imx21->dev, " unknown\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (status_write)
|
|
writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1));
|
|
return rc;
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Host controller management */
|
|
/* =========================================== */
|
|
|
|
static int imx21_hc_reset(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long timeout;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
/* Reset the Host controller modules */
|
|
writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
|
|
USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
|
|
imx21->regs + USBOTG_RST_CTRL);
|
|
|
|
/* Wait for reset to finish */
|
|
timeout = jiffies + HZ;
|
|
while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) {
|
|
if (time_after(jiffies, timeout)) {
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
dev_err(imx21->dev, "timeout waiting for reset\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
spin_unlock_irq(&imx21->lock);
|
|
schedule_timeout_uninterruptible(1);
|
|
spin_lock_irq(&imx21->lock);
|
|
}
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int imx21_hc_start(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
int i, j;
|
|
u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST;
|
|
u32 usb_control = 0;
|
|
|
|
hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) &
|
|
USBOTG_HWMODE_HOSTXCVR_MASK);
|
|
hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) &
|
|
USBOTG_HWMODE_OTGXCVR_MASK);
|
|
|
|
if (imx21->pdata->host1_txenoe)
|
|
usb_control |= USBCTRL_HOST1_TXEN_OE;
|
|
|
|
if (!imx21->pdata->host1_xcverless)
|
|
usb_control |= USBCTRL_HOST1_BYP_TLL;
|
|
|
|
if (imx21->pdata->otg_ext_xcvr)
|
|
usb_control |= USBCTRL_OTC_RCV_RXDP;
|
|
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN),
|
|
imx21->regs + USBOTG_CLK_CTRL);
|
|
writel(hw_mode, imx21->regs + USBOTG_HWMODE);
|
|
writel(usb_control, imx21->regs + USBCTRL);
|
|
writel(USB_MISCCONTROL_SKPRTRY | USB_MISCCONTROL_ARBMODE,
|
|
imx21->regs + USB_MISCCONTROL);
|
|
|
|
/* Clear the ETDs */
|
|
for (i = 0; i < USB_NUM_ETD; i++)
|
|
for (j = 0; j < 4; j++)
|
|
etd_writel(imx21, i, j, 0);
|
|
|
|
/* Take the HC out of reset */
|
|
writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1,
|
|
imx21->regs + USBH_HOST_CTRL);
|
|
|
|
/* Enable ports */
|
|
if (imx21->pdata->enable_otg_host)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(0));
|
|
|
|
if (imx21->pdata->enable_host1)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(1));
|
|
|
|
if (imx21->pdata->enable_host2)
|
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
|
|
imx21->regs + USBH_PORTSTAT(2));
|
|
|
|
|
|
hcd->state = HC_STATE_RUNNING;
|
|
|
|
/* Enable host controller interrupts */
|
|
set_register_bits(imx21, USBH_SYSIEN,
|
|
USBH_SYSIEN_HERRINT |
|
|
USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT);
|
|
set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx21_hc_stop(struct usb_hcd *hcd)
|
|
{
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags);
|
|
|
|
writel(0, imx21->regs + USBH_SYSIEN);
|
|
clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
|
|
clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN,
|
|
USBOTG_CLK_CTRL);
|
|
spin_unlock_irqrestore(&imx21->lock, flags);
|
|
}
|
|
|
|
/* =========================================== */
|
|
/* Driver glue */
|
|
/* =========================================== */
|
|
|
|
static struct hc_driver imx21_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "IMX21 USB Host Controller",
|
|
.hcd_priv_size = sizeof(struct imx21),
|
|
|
|
.flags = HCD_USB11,
|
|
.irq = imx21_irq,
|
|
|
|
.reset = imx21_hc_reset,
|
|
.start = imx21_hc_start,
|
|
.stop = imx21_hc_stop,
|
|
|
|
/* I/O requests */
|
|
.urb_enqueue = imx21_hc_urb_enqueue,
|
|
.urb_dequeue = imx21_hc_urb_dequeue,
|
|
.endpoint_disable = imx21_hc_endpoint_disable,
|
|
|
|
/* scheduling support */
|
|
.get_frame_number = imx21_hc_get_frame,
|
|
|
|
/* Root hub support */
|
|
.hub_status_data = imx21_hc_hub_status_data,
|
|
.hub_control = imx21_hc_hub_control,
|
|
|
|
};
|
|
|
|
static struct mx21_usbh_platform_data default_pdata = {
|
|
.host_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
|
|
.otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
|
|
.enable_host1 = 1,
|
|
.enable_host2 = 1,
|
|
.enable_otg_host = 1,
|
|
|
|
};
|
|
|
|
static int imx21_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct imx21 *imx21 = hcd_to_imx21(hcd);
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
remove_debug_files(imx21);
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (res != NULL) {
|
|
clk_disable_unprepare(imx21->clk);
|
|
clk_put(imx21->clk);
|
|
iounmap(imx21->regs);
|
|
release_mem_region(res->start, resource_size(res));
|
|
}
|
|
|
|
kfree(hcd);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int imx21_probe(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
struct imx21 *imx21;
|
|
struct resource *res;
|
|
int ret;
|
|
int irq;
|
|
|
|
printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
hcd = usb_create_hcd(&imx21_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (hcd == NULL) {
|
|
dev_err(&pdev->dev, "Cannot create hcd (%s)\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
imx21 = hcd_to_imx21(hcd);
|
|
imx21->hcd = hcd;
|
|
imx21->dev = &pdev->dev;
|
|
imx21->pdata = dev_get_platdata(&pdev->dev);
|
|
if (!imx21->pdata)
|
|
imx21->pdata = &default_pdata;
|
|
|
|
spin_lock_init(&imx21->lock);
|
|
INIT_LIST_HEAD(&imx21->dmem_list);
|
|
INIT_LIST_HEAD(&imx21->queue_for_etd);
|
|
INIT_LIST_HEAD(&imx21->queue_for_dmem);
|
|
create_debug_files(imx21);
|
|
|
|
res = request_mem_region(res->start, resource_size(res), hcd_name);
|
|
if (!res) {
|
|
ret = -EBUSY;
|
|
goto failed_request_mem;
|
|
}
|
|
|
|
imx21->regs = ioremap(res->start, resource_size(res));
|
|
if (imx21->regs == NULL) {
|
|
dev_err(imx21->dev, "Cannot map registers\n");
|
|
ret = -ENOMEM;
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
/* Enable clocks source */
|
|
imx21->clk = clk_get(imx21->dev, NULL);
|
|
if (IS_ERR(imx21->clk)) {
|
|
dev_err(imx21->dev, "no clock found\n");
|
|
ret = PTR_ERR(imx21->clk);
|
|
goto failed_clock_get;
|
|
}
|
|
|
|
ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000));
|
|
if (ret)
|
|
goto failed_clock_set;
|
|
ret = clk_prepare_enable(imx21->clk);
|
|
if (ret)
|
|
goto failed_clock_enable;
|
|
|
|
dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n",
|
|
(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF);
|
|
|
|
ret = usb_add_hcd(hcd, irq, 0);
|
|
if (ret != 0) {
|
|
dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret);
|
|
goto failed_add_hcd;
|
|
}
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
return 0;
|
|
|
|
failed_add_hcd:
|
|
clk_disable_unprepare(imx21->clk);
|
|
failed_clock_enable:
|
|
failed_clock_set:
|
|
clk_put(imx21->clk);
|
|
failed_clock_get:
|
|
iounmap(imx21->regs);
|
|
failed_ioremap:
|
|
release_mem_region(res->start, resource_size(res));
|
|
failed_request_mem:
|
|
remove_debug_files(imx21);
|
|
usb_put_hcd(hcd);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver imx21_hcd_driver = {
|
|
.driver = {
|
|
.name = hcd_name,
|
|
},
|
|
.probe = imx21_probe,
|
|
.remove = imx21_remove,
|
|
.suspend = NULL,
|
|
.resume = NULL,
|
|
};
|
|
|
|
module_platform_driver(imx21_hcd_driver);
|
|
|
|
MODULE_DESCRIPTION("i.MX21 USB Host controller");
|
|
MODULE_AUTHOR("Martin Fuzzey");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx21-hcd");
|