419 lines
11 KiB
C
419 lines
11 KiB
C
/*
|
|
* Universal Host Controller Interface driver for USB.
|
|
*
|
|
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
|
|
*
|
|
* (C) Copyright 1999 Linus Torvalds
|
|
* (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
|
|
* (C) Copyright 1999 Randy Dunlap
|
|
* (C) Copyright 1999 Georg Acher, acher@in.tum.de
|
|
* (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
|
|
* (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
|
|
* (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
|
|
*/
|
|
|
|
static const __u8 root_hub_hub_des[] =
|
|
{
|
|
0x09, /* __u8 bLength; */
|
|
0x29, /* __u8 bDescriptorType; Hub-descriptor */
|
|
0x02, /* __u8 bNbrPorts; */
|
|
0x0a, /* __u16 wHubCharacteristics; */
|
|
0x00, /* (per-port OC, no power switching) */
|
|
0x01, /* __u8 bPwrOn2pwrGood; 2ms */
|
|
0x00, /* __u8 bHubContrCurrent; 0 mA */
|
|
0x00, /* __u8 DeviceRemovable; *** 7 Ports max */
|
|
0xff /* __u8 PortPwrCtrlMask; *** 7 ports max */
|
|
};
|
|
|
|
#define UHCI_RH_MAXCHILD 7
|
|
|
|
/* must write as zeroes */
|
|
#define WZ_BITS (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
|
|
|
|
/* status change bits: nonzero writes will clear */
|
|
#define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
|
|
|
|
/* suspend/resume bits: port suspended or port resuming */
|
|
#define SUSPEND_BITS (USBPORTSC_SUSP | USBPORTSC_RD)
|
|
|
|
/* A port that either is connected or has a changed-bit set will prevent
|
|
* us from AUTO_STOPPING.
|
|
*/
|
|
static int any_ports_active(struct uhci_hcd *uhci)
|
|
{
|
|
int port;
|
|
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
if ((uhci_readw(uhci, USBPORTSC1 + port * 2) &
|
|
(USBPORTSC_CCS | RWC_BITS)) ||
|
|
test_bit(port, &uhci->port_c_suspend))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
|
|
{
|
|
int port;
|
|
int mask = RWC_BITS;
|
|
|
|
/* Some boards (both VIA and Intel apparently) report bogus
|
|
* overcurrent indications, causing massive log spam unless
|
|
* we completely ignore them. This doesn't seem to be a problem
|
|
* with the chipset so much as with the way it is connected on
|
|
* the motherboard; if the overcurrent input is left to float
|
|
* then it may constantly register false positives. */
|
|
if (ignore_oc)
|
|
mask &= ~USBPORTSC_OCC;
|
|
|
|
*buf = 0;
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) ||
|
|
test_bit(port, &uhci->port_c_suspend))
|
|
*buf |= (1 << (port + 1));
|
|
}
|
|
return !!*buf;
|
|
}
|
|
|
|
#define CLR_RH_PORTSTAT(x) \
|
|
status = uhci_readw(uhci, port_addr); \
|
|
status &= ~(RWC_BITS|WZ_BITS); \
|
|
status &= ~(x); \
|
|
status |= RWC_BITS & (x); \
|
|
uhci_writew(uhci, status, port_addr)
|
|
|
|
#define SET_RH_PORTSTAT(x) \
|
|
status = uhci_readw(uhci, port_addr); \
|
|
status |= (x); \
|
|
status &= ~(RWC_BITS|WZ_BITS); \
|
|
uhci_writew(uhci, status, port_addr)
|
|
|
|
/* UHCI controllers don't automatically stop resume signalling after 20 msec,
|
|
* so we have to poll and check timeouts in order to take care of it.
|
|
*/
|
|
static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
|
|
unsigned long port_addr)
|
|
{
|
|
int status;
|
|
int i;
|
|
|
|
if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) {
|
|
CLR_RH_PORTSTAT(SUSPEND_BITS);
|
|
if (test_bit(port, &uhci->resuming_ports))
|
|
set_bit(port, &uhci->port_c_suspend);
|
|
|
|
/* The controller won't actually turn off the RD bit until
|
|
* it has had a chance to send a low-speed EOP sequence,
|
|
* which is supposed to take 3 bit times (= 2 microseconds).
|
|
* Experiments show that some controllers take longer, so
|
|
* we'll poll for completion. */
|
|
for (i = 0; i < 10; ++i) {
|
|
if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
}
|
|
clear_bit(port, &uhci->resuming_ports);
|
|
usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port);
|
|
}
|
|
|
|
/* Wait for the UHCI controller in HP's iLO2 server management chip.
|
|
* It can take up to 250 us to finish a reset and set the CSC bit.
|
|
*/
|
|
static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr)
|
|
{
|
|
int i;
|
|
|
|
for (i = 10; i < 250; i += 10) {
|
|
if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC)
|
|
return;
|
|
udelay(10);
|
|
}
|
|
/* Log a warning? */
|
|
}
|
|
|
|
static void uhci_check_ports(struct uhci_hcd *uhci)
|
|
{
|
|
unsigned int port;
|
|
unsigned long port_addr;
|
|
int status;
|
|
|
|
for (port = 0; port < uhci->rh_numports; ++port) {
|
|
port_addr = USBPORTSC1 + 2 * port;
|
|
status = uhci_readw(uhci, port_addr);
|
|
if (unlikely(status & USBPORTSC_PR)) {
|
|
if (time_after_eq(jiffies, uhci->ports_timeout)) {
|
|
CLR_RH_PORTSTAT(USBPORTSC_PR);
|
|
udelay(10);
|
|
|
|
/* HP's server management chip requires
|
|
* a longer delay. */
|
|
if (uhci->wait_for_hp)
|
|
wait_for_HP(uhci, port_addr);
|
|
|
|
/* If the port was enabled before, turning
|
|
* reset on caused a port enable change.
|
|
* Turning reset off causes a port connect
|
|
* status change. Clear these changes. */
|
|
CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
|
|
SET_RH_PORTSTAT(USBPORTSC_PE);
|
|
}
|
|
}
|
|
if (unlikely(status & USBPORTSC_RD)) {
|
|
if (!test_bit(port, &uhci->resuming_ports)) {
|
|
|
|
/* Port received a wakeup request */
|
|
set_bit(port, &uhci->resuming_ports);
|
|
uhci->ports_timeout = jiffies +
|
|
msecs_to_jiffies(USB_RESUME_TIMEOUT);
|
|
usb_hcd_start_port_resume(
|
|
&uhci_to_hcd(uhci)->self, port);
|
|
|
|
/* Make sure we see the port again
|
|
* after the resuming period is over. */
|
|
mod_timer(&uhci_to_hcd(uhci)->rh_timer,
|
|
uhci->ports_timeout);
|
|
} else if (time_after_eq(jiffies,
|
|
uhci->ports_timeout)) {
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
|
|
unsigned long flags;
|
|
int status = 0;
|
|
|
|
spin_lock_irqsave(&uhci->lock, flags);
|
|
|
|
uhci_scan_schedule(uhci);
|
|
if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
|
|
goto done;
|
|
uhci_check_ports(uhci);
|
|
|
|
status = get_hub_status_data(uhci, buf);
|
|
|
|
switch (uhci->rh_state) {
|
|
case UHCI_RH_SUSPENDED:
|
|
/* if port change, ask to be resumed */
|
|
if (status || uhci->resuming_ports) {
|
|
status = 1;
|
|
usb_hcd_resume_root_hub(hcd);
|
|
}
|
|
break;
|
|
|
|
case UHCI_RH_AUTO_STOPPED:
|
|
/* if port change, auto start */
|
|
if (status)
|
|
wakeup_rh(uhci);
|
|
break;
|
|
|
|
case UHCI_RH_RUNNING:
|
|
/* are any devices attached? */
|
|
if (!any_ports_active(uhci)) {
|
|
uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
|
|
uhci->auto_stop_time = jiffies + HZ;
|
|
}
|
|
break;
|
|
|
|
case UHCI_RH_RUNNING_NODEVS:
|
|
/* auto-stop if nothing connected for 1 second */
|
|
if (any_ports_active(uhci))
|
|
uhci->rh_state = UHCI_RH_RUNNING;
|
|
else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
|
|
!uhci->wait_for_hp)
|
|
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&uhci->lock, flags);
|
|
return status;
|
|
}
|
|
|
|
/* size of returned buffer is part of USB spec */
|
|
static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
|
|
int status, lstatus, retval = 0;
|
|
unsigned int port = wIndex - 1;
|
|
unsigned long port_addr = USBPORTSC1 + 2 * port;
|
|
u16 wPortChange, wPortStatus;
|
|
unsigned long flags;
|
|
|
|
if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
|
|
return -ETIMEDOUT;
|
|
|
|
spin_lock_irqsave(&uhci->lock, flags);
|
|
switch (typeReq) {
|
|
|
|
case GetHubStatus:
|
|
*(__le32 *)buf = cpu_to_le32(0);
|
|
retval = 4; /* hub power */
|
|
break;
|
|
case GetPortStatus:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
uhci_check_ports(uhci);
|
|
status = uhci_readw(uhci, port_addr);
|
|
|
|
/* Intel controllers report the OverCurrent bit active on.
|
|
* VIA controllers report it active off, so we'll adjust the
|
|
* bit value. (It's not standardized in the UHCI spec.)
|
|
*/
|
|
if (uhci->oc_low)
|
|
status ^= USBPORTSC_OC;
|
|
|
|
/* UHCI doesn't support C_RESET (always false) */
|
|
wPortChange = lstatus = 0;
|
|
if (status & USBPORTSC_CSC)
|
|
wPortChange |= USB_PORT_STAT_C_CONNECTION;
|
|
if (status & USBPORTSC_PEC)
|
|
wPortChange |= USB_PORT_STAT_C_ENABLE;
|
|
if ((status & USBPORTSC_OCC) && !ignore_oc)
|
|
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
|
|
|
|
if (test_bit(port, &uhci->port_c_suspend)) {
|
|
wPortChange |= USB_PORT_STAT_C_SUSPEND;
|
|
lstatus |= 1;
|
|
}
|
|
if (test_bit(port, &uhci->resuming_ports))
|
|
lstatus |= 4;
|
|
|
|
/* UHCI has no power switching (always on) */
|
|
wPortStatus = USB_PORT_STAT_POWER;
|
|
if (status & USBPORTSC_CCS)
|
|
wPortStatus |= USB_PORT_STAT_CONNECTION;
|
|
if (status & USBPORTSC_PE) {
|
|
wPortStatus |= USB_PORT_STAT_ENABLE;
|
|
if (status & SUSPEND_BITS)
|
|
wPortStatus |= USB_PORT_STAT_SUSPEND;
|
|
}
|
|
if (status & USBPORTSC_OC)
|
|
wPortStatus |= USB_PORT_STAT_OVERCURRENT;
|
|
if (status & USBPORTSC_PR)
|
|
wPortStatus |= USB_PORT_STAT_RESET;
|
|
if (status & USBPORTSC_LSDA)
|
|
wPortStatus |= USB_PORT_STAT_LOW_SPEED;
|
|
|
|
if (wPortChange)
|
|
dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
|
|
wIndex, status, lstatus);
|
|
|
|
*(__le16 *)buf = cpu_to_le16(wPortStatus);
|
|
*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
|
|
retval = 4;
|
|
break;
|
|
case SetHubFeature: /* We don't implement these */
|
|
case ClearHubFeature:
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
case C_HUB_LOCAL_POWER:
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case SetPortFeature:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
SET_RH_PORTSTAT(USBPORTSC_SUSP);
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
SET_RH_PORTSTAT(USBPORTSC_PR);
|
|
|
|
/* Reset terminates Resume signalling */
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
|
|
/* USB v2.0 7.1.7.5 */
|
|
uhci->ports_timeout = jiffies +
|
|
msecs_to_jiffies(USB_RESUME_TIMEOUT);
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
/* UHCI has no power switching */
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case ClearPortFeature:
|
|
if (port >= uhci->rh_numports)
|
|
goto err;
|
|
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
CLR_RH_PORTSTAT(USBPORTSC_PE);
|
|
|
|
/* Disable terminates Resume signalling */
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
break;
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
CLR_RH_PORTSTAT(USBPORTSC_PEC);
|
|
break;
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) {
|
|
|
|
/* Make certain the port isn't suspended */
|
|
uhci_finish_suspend(uhci, port, port_addr);
|
|
} else if (!test_and_set_bit(port,
|
|
&uhci->resuming_ports)) {
|
|
SET_RH_PORTSTAT(USBPORTSC_RD);
|
|
|
|
/* The controller won't allow RD to be set
|
|
* if the port is disabled. When this happens
|
|
* just skip the Resume signalling.
|
|
*/
|
|
if (!(uhci_readw(uhci, port_addr) &
|
|
USBPORTSC_RD))
|
|
uhci_finish_suspend(uhci, port,
|
|
port_addr);
|
|
else
|
|
/* USB v2.0 7.1.7.7 */
|
|
uhci->ports_timeout = jiffies +
|
|
msecs_to_jiffies(20);
|
|
}
|
|
break;
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
clear_bit(port, &uhci->port_c_suspend);
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
/* UHCI has no power switching */
|
|
goto err;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
CLR_RH_PORTSTAT(USBPORTSC_CSC);
|
|
break;
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
CLR_RH_PORTSTAT(USBPORTSC_OCC);
|
|
break;
|
|
case USB_PORT_FEAT_C_RESET:
|
|
/* this driver won't report these */
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
break;
|
|
case GetHubDescriptor:
|
|
retval = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
|
|
memcpy(buf, root_hub_hub_des, retval);
|
|
if (retval > 2)
|
|
buf[2] = uhci->rh_numports;
|
|
break;
|
|
default:
|
|
err:
|
|
retval = -EPIPE;
|
|
}
|
|
spin_unlock_irqrestore(&uhci->lock, flags);
|
|
|
|
return retval;
|
|
}
|