1083 lines
27 KiB
C
1083 lines
27 KiB
C
/*
|
|
* MUSB OTG peripheral driver ep0 handling
|
|
*
|
|
* Copyright 2005 Mentor Graphics Corporation
|
|
* Copyright (C) 2005-2006 by Texas Instruments
|
|
* Copyright (C) 2006-2007 Nokia Corporation
|
|
* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
/* ep0 is always musb->endpoints[0].ep_in */
|
|
#define next_ep0_request(musb) next_in_request(&(musb)->endpoints[0])
|
|
|
|
/*
|
|
* locking note: we use only the controller lock, for simpler correctness.
|
|
* It's always held with IRQs blocked.
|
|
*
|
|
* It protects the ep0 request queue as well as ep0_state, not just the
|
|
* controller and indexed registers. And that lock stays held unless it
|
|
* needs to be dropped to allow reentering this driver ... like upcalls to
|
|
* the gadget driver, or adjusting endpoint halt status.
|
|
*/
|
|
|
|
static char *decode_ep0stage(u8 stage)
|
|
{
|
|
switch (stage) {
|
|
case MUSB_EP0_STAGE_IDLE: return "idle";
|
|
case MUSB_EP0_STAGE_SETUP: return "setup";
|
|
case MUSB_EP0_STAGE_TX: return "in";
|
|
case MUSB_EP0_STAGE_RX: return "out";
|
|
case MUSB_EP0_STAGE_ACKWAIT: return "wait";
|
|
case MUSB_EP0_STAGE_STATUSIN: return "in/status";
|
|
case MUSB_EP0_STAGE_STATUSOUT: return "out/status";
|
|
default: return "?";
|
|
}
|
|
}
|
|
|
|
/* handle a standard GET_STATUS request
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static int service_tx_status_request(
|
|
struct musb *musb,
|
|
const struct usb_ctrlrequest *ctrlrequest)
|
|
{
|
|
void __iomem *mbase = musb->mregs;
|
|
int handled = 1;
|
|
u8 result[2], epnum = 0;
|
|
const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
|
|
|
|
result[1] = 0;
|
|
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
|
|
result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
|
|
if (musb->g.is_otg) {
|
|
result[0] |= musb->g.b_hnp_enable
|
|
<< USB_DEVICE_B_HNP_ENABLE;
|
|
result[0] |= musb->g.a_alt_hnp_support
|
|
<< USB_DEVICE_A_ALT_HNP_SUPPORT;
|
|
result[0] |= musb->g.a_hnp_support
|
|
<< USB_DEVICE_A_HNP_SUPPORT;
|
|
}
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
result[0] = 0;
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT: {
|
|
int is_in;
|
|
struct musb_ep *ep;
|
|
u16 tmp;
|
|
void __iomem *regs;
|
|
|
|
epnum = (u8) ctrlrequest->wIndex;
|
|
if (!epnum) {
|
|
result[0] = 0;
|
|
break;
|
|
}
|
|
|
|
is_in = epnum & USB_DIR_IN;
|
|
if (is_in) {
|
|
epnum &= 0x0f;
|
|
ep = &musb->endpoints[epnum].ep_in;
|
|
} else {
|
|
ep = &musb->endpoints[epnum].ep_out;
|
|
}
|
|
regs = musb->endpoints[epnum].regs;
|
|
|
|
if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
|
|
handled = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
musb_ep_select(mbase, epnum);
|
|
if (is_in)
|
|
tmp = musb_readw(regs, MUSB_TXCSR)
|
|
& MUSB_TXCSR_P_SENDSTALL;
|
|
else
|
|
tmp = musb_readw(regs, MUSB_RXCSR)
|
|
& MUSB_RXCSR_P_SENDSTALL;
|
|
musb_ep_select(mbase, 0);
|
|
|
|
result[0] = tmp ? 1 : 0;
|
|
} break;
|
|
|
|
default:
|
|
/* class, vendor, etc ... delegate */
|
|
handled = 0;
|
|
break;
|
|
}
|
|
|
|
/* fill up the fifo; caller updates csr0 */
|
|
if (handled > 0) {
|
|
u16 len = le16_to_cpu(ctrlrequest->wLength);
|
|
|
|
if (len > 2)
|
|
len = 2;
|
|
musb_write_fifo(&musb->endpoints[0], len, result);
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
/*
|
|
* handle a control-IN request, the end0 buffer contains the current request
|
|
* that is supposed to be a standard control request. Assumes the fifo to
|
|
* be at least 2 bytes long.
|
|
*
|
|
* @return 0 if the request was NOT HANDLED,
|
|
* < 0 when error
|
|
* > 0 when the request is processed
|
|
*
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static int
|
|
service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
|
|
{
|
|
int handled = 0; /* not handled */
|
|
|
|
if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
|
|
== USB_TYPE_STANDARD) {
|
|
switch (ctrlrequest->bRequest) {
|
|
case USB_REQ_GET_STATUS:
|
|
handled = service_tx_status_request(musb,
|
|
ctrlrequest);
|
|
break;
|
|
|
|
/* case USB_REQ_SYNC_FRAME: */
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
/*
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
|
|
{
|
|
musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
|
|
}
|
|
|
|
/*
|
|
* Tries to start B-device HNP negotiation if enabled via sysfs
|
|
*/
|
|
static inline void musb_try_b_hnp_enable(struct musb *musb)
|
|
{
|
|
void __iomem *mbase = musb->mregs;
|
|
u8 devctl;
|
|
|
|
dev_dbg(musb->controller, "HNP: Setting HR\n");
|
|
devctl = musb_readb(mbase, MUSB_DEVCTL);
|
|
musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
|
|
}
|
|
|
|
/*
|
|
* Handle all control requests with no DATA stage, including standard
|
|
* requests such as:
|
|
* USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
|
|
* always delegated to the gadget driver
|
|
* USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
|
|
* always handled here, except for class/vendor/... features
|
|
*
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static int
|
|
service_zero_data_request(struct musb *musb,
|
|
struct usb_ctrlrequest *ctrlrequest)
|
|
__releases(musb->lock)
|
|
__acquires(musb->lock)
|
|
{
|
|
int handled = -EINVAL;
|
|
void __iomem *mbase = musb->mregs;
|
|
const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
|
|
|
|
/* the gadget driver handles everything except what we MUST handle */
|
|
if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
|
|
== USB_TYPE_STANDARD) {
|
|
switch (ctrlrequest->bRequest) {
|
|
case USB_REQ_SET_ADDRESS:
|
|
/* change it after the status stage */
|
|
musb->set_address = true;
|
|
musb->address = (u8) (ctrlrequest->wValue & 0x7f);
|
|
handled = 1;
|
|
break;
|
|
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
if (ctrlrequest->wValue
|
|
!= USB_DEVICE_REMOTE_WAKEUP)
|
|
break;
|
|
musb->may_wakeup = 0;
|
|
handled = 1;
|
|
break;
|
|
case USB_RECIP_INTERFACE:
|
|
break;
|
|
case USB_RECIP_ENDPOINT:{
|
|
const u8 epnum =
|
|
ctrlrequest->wIndex & 0x0f;
|
|
struct musb_ep *musb_ep;
|
|
struct musb_hw_ep *ep;
|
|
struct musb_request *request;
|
|
void __iomem *regs;
|
|
int is_in;
|
|
u16 csr;
|
|
|
|
if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
|
|
ctrlrequest->wValue != USB_ENDPOINT_HALT)
|
|
break;
|
|
|
|
ep = musb->endpoints + epnum;
|
|
regs = ep->regs;
|
|
is_in = ctrlrequest->wIndex & USB_DIR_IN;
|
|
if (is_in)
|
|
musb_ep = &ep->ep_in;
|
|
else
|
|
musb_ep = &ep->ep_out;
|
|
if (!musb_ep->desc)
|
|
break;
|
|
|
|
handled = 1;
|
|
/* Ignore request if endpoint is wedged */
|
|
if (musb_ep->wedged)
|
|
break;
|
|
|
|
musb_ep_select(mbase, epnum);
|
|
if (is_in) {
|
|
csr = musb_readw(regs, MUSB_TXCSR);
|
|
csr |= MUSB_TXCSR_CLRDATATOG |
|
|
MUSB_TXCSR_P_WZC_BITS;
|
|
csr &= ~(MUSB_TXCSR_P_SENDSTALL |
|
|
MUSB_TXCSR_P_SENTSTALL |
|
|
MUSB_TXCSR_TXPKTRDY);
|
|
musb_writew(regs, MUSB_TXCSR, csr);
|
|
} else {
|
|
csr = musb_readw(regs, MUSB_RXCSR);
|
|
csr |= MUSB_RXCSR_CLRDATATOG |
|
|
MUSB_RXCSR_P_WZC_BITS;
|
|
csr &= ~(MUSB_RXCSR_P_SENDSTALL |
|
|
MUSB_RXCSR_P_SENTSTALL);
|
|
musb_writew(regs, MUSB_RXCSR, csr);
|
|
}
|
|
|
|
/* Maybe start the first request in the queue */
|
|
request = next_request(musb_ep);
|
|
if (!musb_ep->busy && request) {
|
|
dev_dbg(musb->controller, "restarting the request\n");
|
|
musb_ep_restart(musb, request);
|
|
}
|
|
|
|
/* select ep0 again */
|
|
musb_ep_select(mbase, 0);
|
|
} break;
|
|
default:
|
|
/* class, vendor, etc ... delegate */
|
|
handled = 0;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case USB_REQ_SET_FEATURE:
|
|
switch (recip) {
|
|
case USB_RECIP_DEVICE:
|
|
handled = 1;
|
|
switch (ctrlrequest->wValue) {
|
|
case USB_DEVICE_REMOTE_WAKEUP:
|
|
musb->may_wakeup = 1;
|
|
break;
|
|
case USB_DEVICE_TEST_MODE:
|
|
if (musb->g.speed != USB_SPEED_HIGH)
|
|
goto stall;
|
|
if (ctrlrequest->wIndex & 0xff)
|
|
goto stall;
|
|
|
|
switch (ctrlrequest->wIndex >> 8) {
|
|
case 1:
|
|
pr_debug("TEST_J\n");
|
|
/* TEST_J */
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_J;
|
|
break;
|
|
case 2:
|
|
/* TEST_K */
|
|
pr_debug("TEST_K\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_K;
|
|
break;
|
|
case 3:
|
|
/* TEST_SE0_NAK */
|
|
pr_debug("TEST_SE0_NAK\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_SE0_NAK;
|
|
break;
|
|
case 4:
|
|
/* TEST_PACKET */
|
|
pr_debug("TEST_PACKET\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_PACKET;
|
|
break;
|
|
|
|
case 0xc0:
|
|
/* TEST_FORCE_HS */
|
|
pr_debug("TEST_FORCE_HS\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_FORCE_HS;
|
|
break;
|
|
case 0xc1:
|
|
/* TEST_FORCE_FS */
|
|
pr_debug("TEST_FORCE_FS\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_FORCE_FS;
|
|
break;
|
|
case 0xc2:
|
|
/* TEST_FIFO_ACCESS */
|
|
pr_debug("TEST_FIFO_ACCESS\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_FIFO_ACCESS;
|
|
break;
|
|
case 0xc3:
|
|
/* TEST_FORCE_HOST */
|
|
pr_debug("TEST_FORCE_HOST\n");
|
|
musb->test_mode_nr =
|
|
MUSB_TEST_FORCE_HOST;
|
|
break;
|
|
default:
|
|
goto stall;
|
|
}
|
|
|
|
/* enter test mode after irq */
|
|
if (handled > 0)
|
|
musb->test_mode = true;
|
|
break;
|
|
case USB_DEVICE_B_HNP_ENABLE:
|
|
if (!musb->g.is_otg)
|
|
goto stall;
|
|
musb->g.b_hnp_enable = 1;
|
|
musb_try_b_hnp_enable(musb);
|
|
break;
|
|
case USB_DEVICE_A_HNP_SUPPORT:
|
|
if (!musb->g.is_otg)
|
|
goto stall;
|
|
musb->g.a_hnp_support = 1;
|
|
break;
|
|
case USB_DEVICE_A_ALT_HNP_SUPPORT:
|
|
if (!musb->g.is_otg)
|
|
goto stall;
|
|
musb->g.a_alt_hnp_support = 1;
|
|
break;
|
|
case USB_DEVICE_DEBUG_MODE:
|
|
handled = 0;
|
|
break;
|
|
stall:
|
|
default:
|
|
handled = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:{
|
|
const u8 epnum =
|
|
ctrlrequest->wIndex & 0x0f;
|
|
struct musb_ep *musb_ep;
|
|
struct musb_hw_ep *ep;
|
|
void __iomem *regs;
|
|
int is_in;
|
|
u16 csr;
|
|
|
|
if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
|
|
ctrlrequest->wValue != USB_ENDPOINT_HALT)
|
|
break;
|
|
|
|
ep = musb->endpoints + epnum;
|
|
regs = ep->regs;
|
|
is_in = ctrlrequest->wIndex & USB_DIR_IN;
|
|
if (is_in)
|
|
musb_ep = &ep->ep_in;
|
|
else
|
|
musb_ep = &ep->ep_out;
|
|
if (!musb_ep->desc)
|
|
break;
|
|
|
|
musb_ep_select(mbase, epnum);
|
|
if (is_in) {
|
|
csr = musb_readw(regs, MUSB_TXCSR);
|
|
if (csr & MUSB_TXCSR_FIFONOTEMPTY)
|
|
csr |= MUSB_TXCSR_FLUSHFIFO;
|
|
csr |= MUSB_TXCSR_P_SENDSTALL
|
|
| MUSB_TXCSR_CLRDATATOG
|
|
| MUSB_TXCSR_P_WZC_BITS;
|
|
musb_writew(regs, MUSB_TXCSR, csr);
|
|
} else {
|
|
csr = musb_readw(regs, MUSB_RXCSR);
|
|
csr |= MUSB_RXCSR_P_SENDSTALL
|
|
| MUSB_RXCSR_FLUSHFIFO
|
|
| MUSB_RXCSR_CLRDATATOG
|
|
| MUSB_RXCSR_P_WZC_BITS;
|
|
musb_writew(regs, MUSB_RXCSR, csr);
|
|
}
|
|
|
|
/* select ep0 again */
|
|
musb_ep_select(mbase, 0);
|
|
handled = 1;
|
|
} break;
|
|
|
|
default:
|
|
/* class, vendor, etc ... delegate */
|
|
handled = 0;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
/* delegate SET_CONFIGURATION, etc */
|
|
handled = 0;
|
|
}
|
|
} else
|
|
handled = 0;
|
|
return handled;
|
|
}
|
|
|
|
/* we have an ep0out data packet
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static void ep0_rxstate(struct musb *musb)
|
|
{
|
|
void __iomem *regs = musb->control_ep->regs;
|
|
struct musb_request *request;
|
|
struct usb_request *req;
|
|
u16 count, csr;
|
|
|
|
request = next_ep0_request(musb);
|
|
req = &request->request;
|
|
|
|
/* read packet and ack; or stall because of gadget driver bug:
|
|
* should have provided the rx buffer before setup() returned.
|
|
*/
|
|
if (req) {
|
|
void *buf = req->buf + req->actual;
|
|
unsigned len = req->length - req->actual;
|
|
|
|
/* read the buffer */
|
|
count = musb_readb(regs, MUSB_COUNT0);
|
|
if (count > len) {
|
|
req->status = -EOVERFLOW;
|
|
count = len;
|
|
}
|
|
if (count > 0) {
|
|
musb_read_fifo(&musb->endpoints[0], count, buf);
|
|
req->actual += count;
|
|
}
|
|
csr = MUSB_CSR0_P_SVDRXPKTRDY;
|
|
if (count < 64 || req->actual == req->length) {
|
|
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
|
|
csr |= MUSB_CSR0_P_DATAEND;
|
|
} else
|
|
req = NULL;
|
|
} else
|
|
csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
|
|
|
|
|
|
/* Completion handler may choose to stall, e.g. because the
|
|
* message just received holds invalid data.
|
|
*/
|
|
if (req) {
|
|
musb->ackpend = csr;
|
|
musb_g_ep0_giveback(musb, req);
|
|
if (!musb->ackpend)
|
|
return;
|
|
musb->ackpend = 0;
|
|
}
|
|
musb_ep_select(musb->mregs, 0);
|
|
musb_writew(regs, MUSB_CSR0, csr);
|
|
}
|
|
|
|
/*
|
|
* transmitting to the host (IN), this code might be called from IRQ
|
|
* and from kernel thread.
|
|
*
|
|
* Context: caller holds controller lock
|
|
*/
|
|
static void ep0_txstate(struct musb *musb)
|
|
{
|
|
void __iomem *regs = musb->control_ep->regs;
|
|
struct musb_request *req = next_ep0_request(musb);
|
|
struct usb_request *request;
|
|
u16 csr = MUSB_CSR0_TXPKTRDY;
|
|
u8 *fifo_src;
|
|
u8 fifo_count;
|
|
|
|
if (!req) {
|
|
/* WARN_ON(1); */
|
|
dev_dbg(musb->controller, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
|
|
return;
|
|
}
|
|
|
|
request = &req->request;
|
|
|
|
/* load the data */
|
|
fifo_src = (u8 *) request->buf + request->actual;
|
|
fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
|
|
request->length - request->actual);
|
|
musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
|
|
request->actual += fifo_count;
|
|
|
|
/* update the flags */
|
|
if (fifo_count < MUSB_MAX_END0_PACKET
|
|
|| (request->actual == request->length
|
|
&& !request->zero)) {
|
|
musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
|
|
csr |= MUSB_CSR0_P_DATAEND;
|
|
} else
|
|
request = NULL;
|
|
|
|
/* report completions as soon as the fifo's loaded; there's no
|
|
* win in waiting till this last packet gets acked. (other than
|
|
* very precise fault reporting, needed by USB TMC; possible with
|
|
* this hardware, but not usable from portable gadget drivers.)
|
|
*/
|
|
if (request) {
|
|
musb->ackpend = csr;
|
|
musb_g_ep0_giveback(musb, request);
|
|
if (!musb->ackpend)
|
|
return;
|
|
musb->ackpend = 0;
|
|
}
|
|
|
|
/* send it out, triggering a "txpktrdy cleared" irq */
|
|
musb_ep_select(musb->mregs, 0);
|
|
musb_writew(regs, MUSB_CSR0, csr);
|
|
}
|
|
|
|
/*
|
|
* Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
|
|
* Fields are left in USB byte-order.
|
|
*
|
|
* Context: caller holds controller lock.
|
|
*/
|
|
static void
|
|
musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
|
|
{
|
|
struct musb_request *r;
|
|
void __iomem *regs = musb->control_ep->regs;
|
|
|
|
musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
|
|
|
|
/* NOTE: earlier 2.6 versions changed setup packets to host
|
|
* order, but now USB packets always stay in USB byte order.
|
|
*/
|
|
dev_dbg(musb->controller, "SETUP req%02x.%02x v%04x i%04x l%d\n",
|
|
req->bRequestType,
|
|
req->bRequest,
|
|
le16_to_cpu(req->wValue),
|
|
le16_to_cpu(req->wIndex),
|
|
le16_to_cpu(req->wLength));
|
|
|
|
/* clean up any leftover transfers */
|
|
r = next_ep0_request(musb);
|
|
if (r)
|
|
musb_g_ep0_giveback(musb, &r->request);
|
|
|
|
/* For zero-data requests we want to delay the STATUS stage to
|
|
* avoid SETUPEND errors. If we read data (OUT), delay accepting
|
|
* packets until there's a buffer to store them in.
|
|
*
|
|
* If we write data, the controller acts happier if we enable
|
|
* the TX FIFO right away, and give the controller a moment
|
|
* to switch modes...
|
|
*/
|
|
musb->set_address = false;
|
|
musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
|
|
if (req->wLength == 0) {
|
|
if (req->bRequestType & USB_DIR_IN)
|
|
musb->ackpend |= MUSB_CSR0_TXPKTRDY;
|
|
musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
|
|
} else if (req->bRequestType & USB_DIR_IN) {
|
|
musb->ep0_state = MUSB_EP0_STAGE_TX;
|
|
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
|
|
while ((musb_readw(regs, MUSB_CSR0)
|
|
& MUSB_CSR0_RXPKTRDY) != 0)
|
|
cpu_relax();
|
|
musb->ackpend = 0;
|
|
} else
|
|
musb->ep0_state = MUSB_EP0_STAGE_RX;
|
|
}
|
|
|
|
static int
|
|
forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
|
|
__releases(musb->lock)
|
|
__acquires(musb->lock)
|
|
{
|
|
int retval;
|
|
if (!musb->gadget_driver)
|
|
return -EOPNOTSUPP;
|
|
spin_unlock(&musb->lock);
|
|
retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
|
|
spin_lock(&musb->lock);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Handle peripheral ep0 interrupt
|
|
*
|
|
* Context: irq handler; we won't re-enter the driver that way.
|
|
*/
|
|
irqreturn_t musb_g_ep0_irq(struct musb *musb)
|
|
{
|
|
u16 csr;
|
|
u16 len;
|
|
void __iomem *mbase = musb->mregs;
|
|
void __iomem *regs = musb->endpoints[0].regs;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
|
|
musb_ep_select(mbase, 0); /* select ep0 */
|
|
csr = musb_readw(regs, MUSB_CSR0);
|
|
len = musb_readb(regs, MUSB_COUNT0);
|
|
|
|
dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n",
|
|
csr, len, decode_ep0stage(musb->ep0_state));
|
|
|
|
if (csr & MUSB_CSR0_P_DATAEND) {
|
|
/*
|
|
* If DATAEND is set we should not call the callback,
|
|
* hence the status stage is not complete.
|
|
*/
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* I sent a stall.. need to acknowledge it now.. */
|
|
if (csr & MUSB_CSR0_P_SENTSTALL) {
|
|
musb_writew(regs, MUSB_CSR0,
|
|
csr & ~MUSB_CSR0_P_SENTSTALL);
|
|
retval = IRQ_HANDLED;
|
|
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
|
|
csr = musb_readw(regs, MUSB_CSR0);
|
|
}
|
|
|
|
/* request ended "early" */
|
|
if (csr & MUSB_CSR0_P_SETUPEND) {
|
|
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
|
|
retval = IRQ_HANDLED;
|
|
/* Transition into the early status phase */
|
|
switch (musb->ep0_state) {
|
|
case MUSB_EP0_STAGE_TX:
|
|
musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
|
|
break;
|
|
case MUSB_EP0_STAGE_RX:
|
|
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
|
|
break;
|
|
default:
|
|
ERR("SetupEnd came in a wrong ep0stage %s\n",
|
|
decode_ep0stage(musb->ep0_state));
|
|
}
|
|
csr = musb_readw(regs, MUSB_CSR0);
|
|
/* NOTE: request may need completion */
|
|
}
|
|
|
|
/* docs from Mentor only describe tx, rx, and idle/setup states.
|
|
* we need to handle nuances around status stages, and also the
|
|
* case where status and setup stages come back-to-back ...
|
|
*/
|
|
switch (musb->ep0_state) {
|
|
|
|
case MUSB_EP0_STAGE_TX:
|
|
/* irq on clearing txpktrdy */
|
|
if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
|
|
ep0_txstate(musb);
|
|
retval = IRQ_HANDLED;
|
|
}
|
|
break;
|
|
|
|
case MUSB_EP0_STAGE_RX:
|
|
/* irq on set rxpktrdy */
|
|
if (csr & MUSB_CSR0_RXPKTRDY) {
|
|
ep0_rxstate(musb);
|
|
retval = IRQ_HANDLED;
|
|
}
|
|
break;
|
|
|
|
case MUSB_EP0_STAGE_STATUSIN:
|
|
/* end of sequence #2 (OUT/RX state) or #3 (no data) */
|
|
|
|
/* update address (if needed) only @ the end of the
|
|
* status phase per usb spec, which also guarantees
|
|
* we get 10 msec to receive this irq... until this
|
|
* is done we won't see the next packet.
|
|
*/
|
|
if (musb->set_address) {
|
|
musb->set_address = false;
|
|
musb_writeb(mbase, MUSB_FADDR, musb->address);
|
|
}
|
|
|
|
/* enter test mode if needed (exit by reset) */
|
|
else if (musb->test_mode) {
|
|
dev_dbg(musb->controller, "entering TESTMODE\n");
|
|
|
|
if (MUSB_TEST_PACKET == musb->test_mode_nr)
|
|
musb_load_testpacket(musb);
|
|
|
|
musb_writeb(mbase, MUSB_TESTMODE,
|
|
musb->test_mode_nr);
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
case MUSB_EP0_STAGE_STATUSOUT:
|
|
/* end of sequence #1: write to host (TX state) */
|
|
{
|
|
struct musb_request *req;
|
|
|
|
req = next_ep0_request(musb);
|
|
if (req)
|
|
musb_g_ep0_giveback(musb, &req->request);
|
|
}
|
|
|
|
/*
|
|
* In case when several interrupts can get coalesced,
|
|
* check to see if we've already received a SETUP packet...
|
|
*/
|
|
if (csr & MUSB_CSR0_RXPKTRDY)
|
|
goto setup;
|
|
|
|
retval = IRQ_HANDLED;
|
|
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
|
|
break;
|
|
|
|
case MUSB_EP0_STAGE_IDLE:
|
|
/*
|
|
* This state is typically (but not always) indiscernible
|
|
* from the status states since the corresponding interrupts
|
|
* tend to happen within too little period of time (with only
|
|
* a zero-length packet in between) and so get coalesced...
|
|
*/
|
|
retval = IRQ_HANDLED;
|
|
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
|
|
/* FALLTHROUGH */
|
|
|
|
case MUSB_EP0_STAGE_SETUP:
|
|
setup:
|
|
if (csr & MUSB_CSR0_RXPKTRDY) {
|
|
struct usb_ctrlrequest setup;
|
|
int handled = 0;
|
|
|
|
if (len != 8) {
|
|
ERR("SETUP packet len %d != 8 ?\n", len);
|
|
break;
|
|
}
|
|
musb_read_setup(musb, &setup);
|
|
retval = IRQ_HANDLED;
|
|
|
|
/* sometimes the RESET won't be reported */
|
|
if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
|
|
u8 power;
|
|
|
|
printk(KERN_NOTICE "%s: peripheral reset "
|
|
"irq lost!\n",
|
|
musb_driver_name);
|
|
power = musb_readb(mbase, MUSB_POWER);
|
|
musb->g.speed = (power & MUSB_POWER_HSMODE)
|
|
? USB_SPEED_HIGH : USB_SPEED_FULL;
|
|
|
|
}
|
|
|
|
switch (musb->ep0_state) {
|
|
|
|
/* sequence #3 (no data stage), includes requests
|
|
* we can't forward (notably SET_ADDRESS and the
|
|
* device/endpoint feature set/clear operations)
|
|
* plus SET_CONFIGURATION and others we must
|
|
*/
|
|
case MUSB_EP0_STAGE_ACKWAIT:
|
|
handled = service_zero_data_request(
|
|
musb, &setup);
|
|
|
|
/*
|
|
* We're expecting no data in any case, so
|
|
* always set the DATAEND bit -- doing this
|
|
* here helps avoid SetupEnd interrupt coming
|
|
* in the idle stage when we're stalling...
|
|
*/
|
|
musb->ackpend |= MUSB_CSR0_P_DATAEND;
|
|
|
|
/* status stage might be immediate */
|
|
if (handled > 0)
|
|
musb->ep0_state =
|
|
MUSB_EP0_STAGE_STATUSIN;
|
|
break;
|
|
|
|
/* sequence #1 (IN to host), includes GET_STATUS
|
|
* requests that we can't forward, GET_DESCRIPTOR
|
|
* and others that we must
|
|
*/
|
|
case MUSB_EP0_STAGE_TX:
|
|
handled = service_in_request(musb, &setup);
|
|
if (handled > 0) {
|
|
musb->ackpend = MUSB_CSR0_TXPKTRDY
|
|
| MUSB_CSR0_P_DATAEND;
|
|
musb->ep0_state =
|
|
MUSB_EP0_STAGE_STATUSOUT;
|
|
}
|
|
break;
|
|
|
|
/* sequence #2 (OUT from host), always forward */
|
|
default: /* MUSB_EP0_STAGE_RX */
|
|
break;
|
|
}
|
|
|
|
dev_dbg(musb->controller, "handled %d, csr %04x, ep0stage %s\n",
|
|
handled, csr,
|
|
decode_ep0stage(musb->ep0_state));
|
|
|
|
/* unless we need to delegate this to the gadget
|
|
* driver, we know how to wrap this up: csr0 has
|
|
* not yet been written.
|
|
*/
|
|
if (handled < 0)
|
|
goto stall;
|
|
else if (handled > 0)
|
|
goto finish;
|
|
|
|
handled = forward_to_driver(musb, &setup);
|
|
if (handled < 0) {
|
|
musb_ep_select(mbase, 0);
|
|
stall:
|
|
dev_dbg(musb->controller, "stall (%d)\n", handled);
|
|
musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
|
|
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
|
|
finish:
|
|
musb_writew(regs, MUSB_CSR0,
|
|
musb->ackpend);
|
|
musb->ackpend = 0;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case MUSB_EP0_STAGE_ACKWAIT:
|
|
/* This should not happen. But happens with tusb6010 with
|
|
* g_file_storage and high speed. Do nothing.
|
|
*/
|
|
retval = IRQ_HANDLED;
|
|
break;
|
|
|
|
default:
|
|
/* "can't happen" */
|
|
WARN_ON(1);
|
|
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
|
|
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
static int
|
|
musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
/* always enabled */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int musb_g_ep0_disable(struct usb_ep *e)
|
|
{
|
|
/* always enabled */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int
|
|
musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
|
|
{
|
|
struct musb_ep *ep;
|
|
struct musb_request *req;
|
|
struct musb *musb;
|
|
int status;
|
|
unsigned long lockflags;
|
|
void __iomem *regs;
|
|
|
|
if (!e || !r)
|
|
return -EINVAL;
|
|
|
|
ep = to_musb_ep(e);
|
|
musb = ep->musb;
|
|
regs = musb->control_ep->regs;
|
|
|
|
req = to_musb_request(r);
|
|
req->musb = musb;
|
|
req->request.actual = 0;
|
|
req->request.status = -EINPROGRESS;
|
|
req->tx = ep->is_in;
|
|
|
|
spin_lock_irqsave(&musb->lock, lockflags);
|
|
|
|
if (!list_empty(&ep->req_list)) {
|
|
status = -EBUSY;
|
|
goto cleanup;
|
|
}
|
|
|
|
switch (musb->ep0_state) {
|
|
case MUSB_EP0_STAGE_RX: /* control-OUT data */
|
|
case MUSB_EP0_STAGE_TX: /* control-IN data */
|
|
case MUSB_EP0_STAGE_ACKWAIT: /* zero-length data */
|
|
status = 0;
|
|
break;
|
|
default:
|
|
dev_dbg(musb->controller, "ep0 request queued in state %d\n",
|
|
musb->ep0_state);
|
|
status = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
|
|
/* add request to the list */
|
|
list_add_tail(&req->list, &ep->req_list);
|
|
|
|
dev_dbg(musb->controller, "queue to %s (%s), length=%d\n",
|
|
ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
|
|
req->request.length);
|
|
|
|
musb_ep_select(musb->mregs, 0);
|
|
|
|
/* sequence #1, IN ... start writing the data */
|
|
if (musb->ep0_state == MUSB_EP0_STAGE_TX)
|
|
ep0_txstate(musb);
|
|
|
|
/* sequence #3, no-data ... issue IN status */
|
|
else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
|
|
if (req->request.length)
|
|
status = -EINVAL;
|
|
else {
|
|
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
|
|
musb_writew(regs, MUSB_CSR0,
|
|
musb->ackpend | MUSB_CSR0_P_DATAEND);
|
|
musb->ackpend = 0;
|
|
musb_g_ep0_giveback(ep->musb, r);
|
|
}
|
|
|
|
/* else for sequence #2 (OUT), caller provides a buffer
|
|
* before the next packet arrives. deferred responses
|
|
* (after SETUP is acked) are racey.
|
|
*/
|
|
} else if (musb->ackpend) {
|
|
musb_writew(regs, MUSB_CSR0, musb->ackpend);
|
|
musb->ackpend = 0;
|
|
}
|
|
|
|
cleanup:
|
|
spin_unlock_irqrestore(&musb->lock, lockflags);
|
|
return status;
|
|
}
|
|
|
|
static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
/* we just won't support this */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int musb_g_ep0_halt(struct usb_ep *e, int value)
|
|
{
|
|
struct musb_ep *ep;
|
|
struct musb *musb;
|
|
void __iomem *base, *regs;
|
|
unsigned long flags;
|
|
int status;
|
|
u16 csr;
|
|
|
|
if (!e || !value)
|
|
return -EINVAL;
|
|
|
|
ep = to_musb_ep(e);
|
|
musb = ep->musb;
|
|
base = musb->mregs;
|
|
regs = musb->control_ep->regs;
|
|
status = 0;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
if (!list_empty(&ep->req_list)) {
|
|
status = -EBUSY;
|
|
goto cleanup;
|
|
}
|
|
|
|
musb_ep_select(base, 0);
|
|
csr = musb->ackpend;
|
|
|
|
switch (musb->ep0_state) {
|
|
|
|
/* Stalls are usually issued after parsing SETUP packet, either
|
|
* directly in irq context from setup() or else later.
|
|
*/
|
|
case MUSB_EP0_STAGE_TX: /* control-IN data */
|
|
case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */
|
|
case MUSB_EP0_STAGE_RX: /* control-OUT data */
|
|
csr = musb_readw(regs, MUSB_CSR0);
|
|
/* FALLTHROUGH */
|
|
|
|
/* It's also OK to issue stalls during callbacks when a non-empty
|
|
* DATA stage buffer has been read (or even written).
|
|
*/
|
|
case MUSB_EP0_STAGE_STATUSIN: /* control-OUT status */
|
|
case MUSB_EP0_STAGE_STATUSOUT: /* control-IN status */
|
|
|
|
csr |= MUSB_CSR0_P_SENDSTALL;
|
|
musb_writew(regs, MUSB_CSR0, csr);
|
|
musb->ep0_state = MUSB_EP0_STAGE_IDLE;
|
|
musb->ackpend = 0;
|
|
break;
|
|
default:
|
|
dev_dbg(musb->controller, "ep0 can't halt in state %d\n", musb->ep0_state);
|
|
status = -EINVAL;
|
|
}
|
|
|
|
cleanup:
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
return status;
|
|
}
|
|
|
|
const struct usb_ep_ops musb_g_ep0_ops = {
|
|
.enable = musb_g_ep0_enable,
|
|
.disable = musb_g_ep0_disable,
|
|
.alloc_request = musb_alloc_request,
|
|
.free_request = musb_free_request,
|
|
.queue = musb_g_ep0_queue,
|
|
.dequeue = musb_g_ep0_dequeue,
|
|
.set_halt = musb_g_ep0_halt,
|
|
};
|