560 lines
16 KiB
C
560 lines
16 KiB
C
/* Driver for Freecom USB/IDE adaptor
|
|
*
|
|
* Freecom v0.1:
|
|
*
|
|
* First release
|
|
*
|
|
* Current development and maintenance by:
|
|
* (C) 2000 David Brown <usb-storage@davidb.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* This driver was developed with information provided in FREECOM's USB
|
|
* Programmers Reference Guide. For further information contact Freecom
|
|
* (http://www.freecom.de/)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
|
|
#include "usb.h"
|
|
#include "transport.h"
|
|
#include "protocol.h"
|
|
#include "debug.h"
|
|
|
|
MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
|
|
MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DEBUG
|
|
static void pdump(struct us_data *us, void *ibuffer, int length);
|
|
#endif
|
|
|
|
/* Bits of HD_STATUS */
|
|
#define ERR_STAT 0x01
|
|
#define DRQ_STAT 0x08
|
|
|
|
/* All of the outgoing packets are 64 bytes long. */
|
|
struct freecom_cb_wrap {
|
|
u8 Type; /* Command type. */
|
|
u8 Timeout; /* Timeout in seconds. */
|
|
u8 Atapi[12]; /* An ATAPI packet. */
|
|
u8 Filler[50]; /* Padding Data. */
|
|
};
|
|
|
|
struct freecom_xfer_wrap {
|
|
u8 Type; /* Command type. */
|
|
u8 Timeout; /* Timeout in seconds. */
|
|
__le32 Count; /* Number of bytes to transfer. */
|
|
u8 Pad[58];
|
|
} __attribute__ ((packed));
|
|
|
|
struct freecom_ide_out {
|
|
u8 Type; /* Type + IDE register. */
|
|
u8 Pad;
|
|
__le16 Value; /* Value to write. */
|
|
u8 Pad2[60];
|
|
};
|
|
|
|
struct freecom_ide_in {
|
|
u8 Type; /* Type | IDE register. */
|
|
u8 Pad[63];
|
|
};
|
|
|
|
struct freecom_status {
|
|
u8 Status;
|
|
u8 Reason;
|
|
__le16 Count;
|
|
u8 Pad[60];
|
|
};
|
|
|
|
/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
|
|
* register. */
|
|
#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
|
|
#define FCM_STATUS_BUSY 0x80
|
|
|
|
/* These are the packet types. The low bit indicates that this command
|
|
* should wait for an interrupt. */
|
|
#define FCM_PACKET_ATAPI 0x21
|
|
#define FCM_PACKET_STATUS 0x20
|
|
|
|
/* Receive data from the IDE interface. The ATAPI packet has already
|
|
* waited, so the data should be immediately available. */
|
|
#define FCM_PACKET_INPUT 0x81
|
|
|
|
/* Send data to the IDE interface. */
|
|
#define FCM_PACKET_OUTPUT 0x01
|
|
|
|
/* Write a value to an ide register. Or the ide register to write after
|
|
* munging the address a bit. */
|
|
#define FCM_PACKET_IDE_WRITE 0x40
|
|
#define FCM_PACKET_IDE_READ 0xC0
|
|
|
|
/* All packets (except for status) are 64 bytes long. */
|
|
#define FCM_PACKET_LENGTH 64
|
|
#define FCM_STATUS_PACKET_LENGTH 4
|
|
|
|
static int init_freecom(struct us_data *us);
|
|
|
|
|
|
/*
|
|
* The table of devices
|
|
*/
|
|
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
|
|
vendorName, productName, useProtocol, useTransport, \
|
|
initFunction, flags) \
|
|
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
|
|
.driver_info = (flags) }
|
|
|
|
static struct usb_device_id freecom_usb_ids[] = {
|
|
# include "unusual_freecom.h"
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
|
|
|
|
#undef UNUSUAL_DEV
|
|
|
|
/*
|
|
* The flags table
|
|
*/
|
|
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
|
|
vendor_name, product_name, use_protocol, use_transport, \
|
|
init_function, Flags) \
|
|
{ \
|
|
.vendorName = vendor_name, \
|
|
.productName = product_name, \
|
|
.useProtocol = use_protocol, \
|
|
.useTransport = use_transport, \
|
|
.initFunction = init_function, \
|
|
}
|
|
|
|
static struct us_unusual_dev freecom_unusual_dev_list[] = {
|
|
# include "unusual_freecom.h"
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
#undef UNUSUAL_DEV
|
|
|
|
static int
|
|
freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
|
|
unsigned int ipipe, unsigned int opipe, int count)
|
|
{
|
|
struct freecom_xfer_wrap *fxfr =
|
|
(struct freecom_xfer_wrap *) us->iobuf;
|
|
int result;
|
|
|
|
fxfr->Type = FCM_PACKET_INPUT | 0x00;
|
|
fxfr->Timeout = 0; /* Short timeout for debugging. */
|
|
fxfr->Count = cpu_to_le32 (count);
|
|
memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
|
|
|
|
usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
|
|
|
|
/* Issue the transfer command. */
|
|
result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
|
|
FCM_PACKET_LENGTH, NULL);
|
|
if (result != USB_STOR_XFER_GOOD) {
|
|
usb_stor_dbg(us, "Freecom readdata transport error\n");
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
|
|
/* Now transfer all of our blocks. */
|
|
usb_stor_dbg(us, "Start of read\n");
|
|
result = usb_stor_bulk_srb(us, ipipe, srb);
|
|
usb_stor_dbg(us, "freecom_readdata done!\n");
|
|
|
|
if (result > USB_STOR_XFER_SHORT)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
|
|
static int
|
|
freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
|
|
int unsigned ipipe, unsigned int opipe, int count)
|
|
{
|
|
struct freecom_xfer_wrap *fxfr =
|
|
(struct freecom_xfer_wrap *) us->iobuf;
|
|
int result;
|
|
|
|
fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
|
|
fxfr->Timeout = 0; /* Short timeout for debugging. */
|
|
fxfr->Count = cpu_to_le32 (count);
|
|
memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
|
|
|
|
usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
|
|
|
|
/* Issue the transfer command. */
|
|
result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
|
|
FCM_PACKET_LENGTH, NULL);
|
|
if (result != USB_STOR_XFER_GOOD) {
|
|
usb_stor_dbg(us, "Freecom writedata transport error\n");
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
|
|
/* Now transfer all of our blocks. */
|
|
usb_stor_dbg(us, "Start of write\n");
|
|
result = usb_stor_bulk_srb(us, opipe, srb);
|
|
|
|
usb_stor_dbg(us, "freecom_writedata done!\n");
|
|
if (result > USB_STOR_XFER_SHORT)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
|
|
/*
|
|
* Transport for the Freecom USB/IDE adaptor.
|
|
*
|
|
*/
|
|
static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
|
|
{
|
|
struct freecom_cb_wrap *fcb;
|
|
struct freecom_status *fst;
|
|
unsigned int ipipe, opipe; /* We need both pipes. */
|
|
int result;
|
|
unsigned int partial;
|
|
int length;
|
|
|
|
fcb = (struct freecom_cb_wrap *) us->iobuf;
|
|
fst = (struct freecom_status *) us->iobuf;
|
|
|
|
usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
|
|
|
|
/* Get handles for both transports. */
|
|
opipe = us->send_bulk_pipe;
|
|
ipipe = us->recv_bulk_pipe;
|
|
|
|
/* The ATAPI Command always goes out first. */
|
|
fcb->Type = FCM_PACKET_ATAPI | 0x00;
|
|
fcb->Timeout = 0;
|
|
memcpy (fcb->Atapi, srb->cmnd, 12);
|
|
memset (fcb->Filler, 0, sizeof (fcb->Filler));
|
|
|
|
US_DEBUG(pdump(us, srb->cmnd, 12));
|
|
|
|
/* Send it out. */
|
|
result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
|
|
FCM_PACKET_LENGTH, NULL);
|
|
|
|
/* The Freecom device will only fail if there is something wrong in
|
|
* USB land. It returns the status in its own registers, which
|
|
* come back in the bulk pipe. */
|
|
if (result != USB_STOR_XFER_GOOD) {
|
|
usb_stor_dbg(us, "freecom transport error\n");
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
|
|
/* There are times we can optimize out this status read, but it
|
|
* doesn't hurt us to always do it now. */
|
|
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
|
|
FCM_STATUS_PACKET_LENGTH, &partial);
|
|
usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
|
|
if (result != USB_STOR_XFER_GOOD)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
|
|
US_DEBUG(pdump(us, (void *)fst, partial));
|
|
|
|
/* The firmware will time-out commands after 20 seconds. Some commands
|
|
* can legitimately take longer than this, so we use a different
|
|
* command that only waits for the interrupt and then sends status,
|
|
* without having to send a new ATAPI command to the device.
|
|
*
|
|
* NOTE: There is some indication that a data transfer after a timeout
|
|
* may not work, but that is a condition that should never happen.
|
|
*/
|
|
while (fst->Status & FCM_STATUS_BUSY) {
|
|
usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
|
|
usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
|
|
|
|
/* Get the status again */
|
|
fcb->Type = FCM_PACKET_STATUS;
|
|
fcb->Timeout = 0;
|
|
memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
|
|
memset (fcb->Filler, 0, sizeof (fcb->Filler));
|
|
|
|
/* Send it out. */
|
|
result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
|
|
FCM_PACKET_LENGTH, NULL);
|
|
|
|
/* The Freecom device will only fail if there is something
|
|
* wrong in USB land. It returns the status in its own
|
|
* registers, which come back in the bulk pipe.
|
|
*/
|
|
if (result != USB_STOR_XFER_GOOD) {
|
|
usb_stor_dbg(us, "freecom transport error\n");
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
|
|
/* get the data */
|
|
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
|
|
FCM_STATUS_PACKET_LENGTH, &partial);
|
|
|
|
usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
|
|
if (result != USB_STOR_XFER_GOOD)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
|
|
US_DEBUG(pdump(us, (void *)fst, partial));
|
|
}
|
|
|
|
if (partial != 4)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
if ((fst->Status & 1) != 0) {
|
|
usb_stor_dbg(us, "operation failed\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
|
|
/* The device might not have as much data available as we
|
|
* requested. If you ask for more than the device has, this reads
|
|
* and such will hang. */
|
|
usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
|
|
le16_to_cpu(fst->Count));
|
|
usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
|
|
|
|
/* Find the length we desire to read. */
|
|
switch (srb->cmnd[0]) {
|
|
case INQUIRY:
|
|
case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
|
|
case MODE_SENSE:
|
|
case MODE_SENSE_10:
|
|
length = le16_to_cpu(fst->Count);
|
|
break;
|
|
default:
|
|
length = scsi_bufflen(srb);
|
|
}
|
|
|
|
/* verify that this amount is legal */
|
|
if (length > scsi_bufflen(srb)) {
|
|
length = scsi_bufflen(srb);
|
|
usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
|
|
length);
|
|
}
|
|
|
|
/* What we do now depends on what direction the data is supposed to
|
|
* move in. */
|
|
|
|
switch (us->srb->sc_data_direction) {
|
|
case DMA_FROM_DEVICE:
|
|
/* catch bogus "read 0 length" case */
|
|
if (!length)
|
|
break;
|
|
/* Make sure that the status indicates that the device
|
|
* wants data as well. */
|
|
if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
|
|
usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
result = freecom_readdata (srb, us, ipipe, opipe, length);
|
|
if (result != USB_STOR_TRANSPORT_GOOD)
|
|
return result;
|
|
|
|
usb_stor_dbg(us, "Waiting for status\n");
|
|
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
|
|
FCM_PACKET_LENGTH, &partial);
|
|
US_DEBUG(pdump(us, (void *)fst, partial));
|
|
|
|
if (partial != 4 || result > USB_STOR_XFER_SHORT)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
if ((fst->Status & ERR_STAT) != 0) {
|
|
usb_stor_dbg(us, "operation failed\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
if ((fst->Reason & 3) != 3) {
|
|
usb_stor_dbg(us, "Drive seems still hungry\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
usb_stor_dbg(us, "Transfer happy\n");
|
|
break;
|
|
|
|
case DMA_TO_DEVICE:
|
|
/* catch bogus "write 0 length" case */
|
|
if (!length)
|
|
break;
|
|
/* Make sure the status indicates that the device wants to
|
|
* send us data. */
|
|
/* !!IMPLEMENT!! */
|
|
result = freecom_writedata (srb, us, ipipe, opipe, length);
|
|
if (result != USB_STOR_TRANSPORT_GOOD)
|
|
return result;
|
|
|
|
usb_stor_dbg(us, "Waiting for status\n");
|
|
result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
|
|
FCM_PACKET_LENGTH, &partial);
|
|
|
|
if (partial != 4 || result > USB_STOR_XFER_SHORT)
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
if ((fst->Status & ERR_STAT) != 0) {
|
|
usb_stor_dbg(us, "operation failed\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
if ((fst->Reason & 3) != 3) {
|
|
usb_stor_dbg(us, "Drive seems still hungry\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
|
|
usb_stor_dbg(us, "Transfer happy\n");
|
|
break;
|
|
|
|
|
|
case DMA_NONE:
|
|
/* Easy, do nothing. */
|
|
break;
|
|
|
|
default:
|
|
/* should never hit here -- filtered in usb.c */
|
|
usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
|
|
us->srb->sc_data_direction);
|
|
/* Return fail, SCSI seems to handle this better. */
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
break;
|
|
}
|
|
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
|
|
static int init_freecom(struct us_data *us)
|
|
{
|
|
int result;
|
|
char *buffer = us->iobuf;
|
|
|
|
/* The DMA-mapped I/O buffer is 64 bytes long, just right for
|
|
* all our packets. No need to allocate any extra buffer space.
|
|
*/
|
|
|
|
result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
|
|
0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
|
|
buffer[32] = '\0';
|
|
usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
|
|
|
|
/* Special thanks to the people at Freecom for providing me with
|
|
* this "magic sequence", which they use in their Windows and MacOS
|
|
* drivers to make sure that all the attached perhiperals are
|
|
* properly reset.
|
|
*/
|
|
|
|
/* send reset */
|
|
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
|
|
0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
|
|
usb_stor_dbg(us, "result from activate reset is %d\n", result);
|
|
|
|
/* wait 250ms */
|
|
mdelay(250);
|
|
|
|
/* clear reset */
|
|
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
|
|
0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
|
|
usb_stor_dbg(us, "result from clear reset is %d\n", result);
|
|
|
|
/* wait 3 seconds */
|
|
mdelay(3 * 1000);
|
|
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
|
|
static int usb_stor_freecom_reset(struct us_data *us)
|
|
{
|
|
printk (KERN_CRIT "freecom reset called\n");
|
|
|
|
/* We don't really have this feature. */
|
|
return FAILED;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DEBUG
|
|
static void pdump(struct us_data *us, void *ibuffer, int length)
|
|
{
|
|
static char line[80];
|
|
int offset = 0;
|
|
unsigned char *buffer = (unsigned char *) ibuffer;
|
|
int i, j;
|
|
int from, base;
|
|
|
|
offset = 0;
|
|
for (i = 0; i < length; i++) {
|
|
if ((i & 15) == 0) {
|
|
if (i > 0) {
|
|
offset += sprintf (line+offset, " - ");
|
|
for (j = i - 16; j < i; j++) {
|
|
if (buffer[j] >= 32 && buffer[j] <= 126)
|
|
line[offset++] = buffer[j];
|
|
else
|
|
line[offset++] = '.';
|
|
}
|
|
line[offset] = 0;
|
|
usb_stor_dbg(us, "%s\n", line);
|
|
offset = 0;
|
|
}
|
|
offset += sprintf (line+offset, "%08x:", i);
|
|
} else if ((i & 7) == 0) {
|
|
offset += sprintf (line+offset, " -");
|
|
}
|
|
offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
|
|
}
|
|
|
|
/* Add the last "chunk" of data. */
|
|
from = (length - 1) % 16;
|
|
base = ((length - 1) / 16) * 16;
|
|
|
|
for (i = from + 1; i < 16; i++)
|
|
offset += sprintf (line+offset, " ");
|
|
if (from < 8)
|
|
offset += sprintf (line+offset, " ");
|
|
offset += sprintf (line+offset, " - ");
|
|
|
|
for (i = 0; i <= from; i++) {
|
|
if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
|
|
line[offset++] = buffer[base+i];
|
|
else
|
|
line[offset++] = '.';
|
|
}
|
|
line[offset] = 0;
|
|
usb_stor_dbg(us, "%s\n", line);
|
|
offset = 0;
|
|
}
|
|
#endif
|
|
|
|
static int freecom_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct us_data *us;
|
|
int result;
|
|
|
|
result = usb_stor_probe1(&us, intf, id,
|
|
(id - freecom_usb_ids) + freecom_unusual_dev_list);
|
|
if (result)
|
|
return result;
|
|
|
|
us->transport_name = "Freecom";
|
|
us->transport = freecom_transport;
|
|
us->transport_reset = usb_stor_freecom_reset;
|
|
us->max_lun = 0;
|
|
|
|
result = usb_stor_probe2(us);
|
|
return result;
|
|
}
|
|
|
|
static struct usb_driver freecom_driver = {
|
|
.name = "ums-freecom",
|
|
.probe = freecom_probe,
|
|
.disconnect = usb_stor_disconnect,
|
|
.suspend = usb_stor_suspend,
|
|
.resume = usb_stor_resume,
|
|
.reset_resume = usb_stor_reset_resume,
|
|
.pre_reset = usb_stor_pre_reset,
|
|
.post_reset = usb_stor_post_reset,
|
|
.id_table = freecom_usb_ids,
|
|
.soft_unbind = 1,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
module_usb_driver(freecom_driver);
|