509 lines
14 KiB
C
509 lines
14 KiB
C
/*
|
|
* Xilinx TFT frame buffer driver
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* source@mvista.com
|
|
*
|
|
* 2002-2007 (c) MontaVista Software, Inc.
|
|
* 2007 (c) Secret Lab Technologies, Ltd.
|
|
* 2009 (c) Xilinx Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/*
|
|
* This driver was based on au1100fb.c by MontaVista rewritten for 2.6
|
|
* by Embedded Alley Solutions <source@embeddedalley.com>, which in turn
|
|
* was based on skeletonfb.c, Skeleton for a frame buffer device by
|
|
* Geert Uytterhoeven.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#ifdef CONFIG_PPC_DCR
|
|
#include <asm/dcr.h>
|
|
#endif
|
|
|
|
#define DRIVER_NAME "xilinxfb"
|
|
|
|
|
|
/*
|
|
* Xilinx calls it "TFT LCD Controller" though it can also be used for
|
|
* the VGA port on the Xilinx ML40x board. This is a hardware display
|
|
* controller for a 640x480 resolution TFT or VGA screen.
|
|
*
|
|
* The interface to the framebuffer is nice and simple. There are two
|
|
* control registers. The first tells the LCD interface where in memory
|
|
* the frame buffer is (only the 11 most significant bits are used, so
|
|
* don't start thinking about scrolling). The second allows the LCD to
|
|
* be turned on or off as well as rotated 180 degrees.
|
|
*
|
|
* In case of direct BUS access the second control register will be at
|
|
* an offset of 4 as compared to the DCR access where the offset is 1
|
|
* i.e. REG_CTRL. So this is taken care in the function
|
|
* xilinx_fb_out32 where it left shifts the offset 2 times in case of
|
|
* direct BUS access.
|
|
*/
|
|
#define NUM_REGS 2
|
|
#define REG_FB_ADDR 0
|
|
#define REG_CTRL 1
|
|
#define REG_CTRL_ENABLE 0x0001
|
|
#define REG_CTRL_ROTATE 0x0002
|
|
|
|
/*
|
|
* The hardware only handles a single mode: 640x480 24 bit true
|
|
* color. Each pixel gets a word (32 bits) of memory. Within each word,
|
|
* the 8 most significant bits are ignored, the next 8 bits are the red
|
|
* level, the next 8 bits are the green level and the 8 least
|
|
* significant bits are the blue level. Each row of the LCD uses 1024
|
|
* words, but only the first 640 pixels are displayed with the other 384
|
|
* words being ignored. There are 480 rows.
|
|
*/
|
|
#define BYTES_PER_PIXEL 4
|
|
#define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8)
|
|
|
|
#define RED_SHIFT 16
|
|
#define GREEN_SHIFT 8
|
|
#define BLUE_SHIFT 0
|
|
|
|
#define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */
|
|
|
|
/* ML300/403 reference design framebuffer driver platform data struct */
|
|
struct xilinxfb_platform_data {
|
|
u32 rotate_screen; /* Flag to rotate display 180 degrees */
|
|
u32 screen_height_mm; /* Physical dimensions of screen in mm */
|
|
u32 screen_width_mm;
|
|
u32 xres, yres; /* resolution of screen in pixels */
|
|
u32 xvirt, yvirt; /* resolution of memory buffer */
|
|
|
|
/* Physical address of framebuffer memory; If non-zero, driver
|
|
* will use provided memory address instead of allocating one from
|
|
* the consistent pool. */
|
|
u32 fb_phys;
|
|
};
|
|
|
|
/*
|
|
* Default xilinxfb configuration
|
|
*/
|
|
static struct xilinxfb_platform_data xilinx_fb_default_pdata = {
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.xvirt = 1024,
|
|
.yvirt = 480,
|
|
};
|
|
|
|
/*
|
|
* Here are the default fb_fix_screeninfo and fb_var_screeninfo structures
|
|
*/
|
|
static struct fb_fix_screeninfo xilinx_fb_fix = {
|
|
.id = "Xilinx",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_TRUECOLOR,
|
|
.accel = FB_ACCEL_NONE
|
|
};
|
|
|
|
static struct fb_var_screeninfo xilinx_fb_var = {
|
|
.bits_per_pixel = BITS_PER_PIXEL,
|
|
|
|
.red = { RED_SHIFT, 8, 0 },
|
|
.green = { GREEN_SHIFT, 8, 0 },
|
|
.blue = { BLUE_SHIFT, 8, 0 },
|
|
.transp = { 0, 0, 0 },
|
|
|
|
.activate = FB_ACTIVATE_NOW
|
|
};
|
|
|
|
|
|
#define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */
|
|
#define LITTLE_ENDIAN_ACCESS 0x2 /* LITTLE ENDIAN IO functions */
|
|
|
|
struct xilinxfb_drvdata {
|
|
|
|
struct fb_info info; /* FB driver info record */
|
|
|
|
phys_addr_t regs_phys; /* phys. address of the control
|
|
registers */
|
|
void __iomem *regs; /* virt. address of the control
|
|
registers */
|
|
#ifdef CONFIG_PPC_DCR
|
|
dcr_host_t dcr_host;
|
|
unsigned int dcr_len;
|
|
#endif
|
|
void *fb_virt; /* virt. address of the frame buffer */
|
|
dma_addr_t fb_phys; /* phys. address of the frame buffer */
|
|
int fb_alloced; /* Flag, was the fb memory alloced? */
|
|
|
|
u8 flags; /* features of the driver */
|
|
|
|
u32 reg_ctrl_default;
|
|
|
|
u32 pseudo_palette[PALETTE_ENTRIES_NO];
|
|
/* Fake palette of 16 colors */
|
|
};
|
|
|
|
#define to_xilinxfb_drvdata(_info) \
|
|
container_of(_info, struct xilinxfb_drvdata, info)
|
|
|
|
/*
|
|
* The XPS TFT Controller can be accessed through BUS or DCR interface.
|
|
* To perform the read/write on the registers we need to check on
|
|
* which bus its connected and call the appropriate write API.
|
|
*/
|
|
static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
|
|
u32 val)
|
|
{
|
|
if (drvdata->flags & BUS_ACCESS_FLAG) {
|
|
if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
|
|
iowrite32(val, drvdata->regs + (offset << 2));
|
|
else
|
|
iowrite32be(val, drvdata->regs + (offset << 2));
|
|
}
|
|
#ifdef CONFIG_PPC_DCR
|
|
else
|
|
dcr_write(drvdata->dcr_host, offset, val);
|
|
#endif
|
|
}
|
|
|
|
static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset)
|
|
{
|
|
if (drvdata->flags & BUS_ACCESS_FLAG) {
|
|
if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
|
|
return ioread32(drvdata->regs + (offset << 2));
|
|
else
|
|
return ioread32be(drvdata->regs + (offset << 2));
|
|
}
|
|
#ifdef CONFIG_PPC_DCR
|
|
else
|
|
return dcr_read(drvdata->dcr_host, offset);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
|
|
unsigned transp, struct fb_info *fbi)
|
|
{
|
|
u32 *palette = fbi->pseudo_palette;
|
|
|
|
if (regno >= PALETTE_ENTRIES_NO)
|
|
return -EINVAL;
|
|
|
|
if (fbi->var.grayscale) {
|
|
/* Convert color to grayscale.
|
|
* grayscale = 0.30*R + 0.59*G + 0.11*B */
|
|
red = green = blue =
|
|
(red * 77 + green * 151 + blue * 28 + 127) >> 8;
|
|
}
|
|
|
|
/* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */
|
|
|
|
/* We only handle 8 bits of each color. */
|
|
red >>= 8;
|
|
green >>= 8;
|
|
blue >>= 8;
|
|
palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) |
|
|
(blue << BLUE_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
|
|
{
|
|
struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi);
|
|
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
/* turn on panel */
|
|
xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
|
|
break;
|
|
|
|
case FB_BLANK_NORMAL:
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
case FB_BLANK_POWERDOWN:
|
|
/* turn off panel */
|
|
xilinx_fb_out32(drvdata, REG_CTRL, 0);
|
|
default:
|
|
break;
|
|
|
|
}
|
|
return 0; /* success */
|
|
}
|
|
|
|
static struct fb_ops xilinxfb_ops =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.fb_setcolreg = xilinx_fb_setcolreg,
|
|
.fb_blank = xilinx_fb_blank,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Bus independent setup/teardown
|
|
*/
|
|
|
|
static int xilinxfb_assign(struct platform_device *pdev,
|
|
struct xilinxfb_drvdata *drvdata,
|
|
struct xilinxfb_platform_data *pdata)
|
|
{
|
|
int rc;
|
|
struct device *dev = &pdev->dev;
|
|
int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
|
|
|
|
if (drvdata->flags & BUS_ACCESS_FLAG) {
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(drvdata->regs))
|
|
return PTR_ERR(drvdata->regs);
|
|
|
|
drvdata->regs_phys = res->start;
|
|
}
|
|
|
|
/* Allocate the framebuffer memory */
|
|
if (pdata->fb_phys) {
|
|
drvdata->fb_phys = pdata->fb_phys;
|
|
drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize);
|
|
} else {
|
|
drvdata->fb_alloced = 1;
|
|
drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize),
|
|
&drvdata->fb_phys, GFP_KERNEL);
|
|
}
|
|
|
|
if (!drvdata->fb_virt) {
|
|
dev_err(dev, "Could not allocate frame buffer memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Clear (turn to black) the framebuffer */
|
|
memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
|
|
|
|
/* Tell the hardware where the frame buffer is */
|
|
xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
|
|
rc = xilinx_fb_in32(drvdata, REG_FB_ADDR);
|
|
/* Endianess detection */
|
|
if (rc != drvdata->fb_phys) {
|
|
drvdata->flags |= LITTLE_ENDIAN_ACCESS;
|
|
xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
|
|
}
|
|
|
|
/* Turn on the display */
|
|
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
|
|
if (pdata->rotate_screen)
|
|
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
|
|
xilinx_fb_out32(drvdata, REG_CTRL,
|
|
drvdata->reg_ctrl_default);
|
|
|
|
/* Fill struct fb_info */
|
|
drvdata->info.device = dev;
|
|
drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
|
|
drvdata->info.fbops = &xilinxfb_ops;
|
|
drvdata->info.fix = xilinx_fb_fix;
|
|
drvdata->info.fix.smem_start = drvdata->fb_phys;
|
|
drvdata->info.fix.smem_len = fbsize;
|
|
drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL;
|
|
|
|
drvdata->info.pseudo_palette = drvdata->pseudo_palette;
|
|
drvdata->info.flags = FBINFO_DEFAULT;
|
|
drvdata->info.var = xilinx_fb_var;
|
|
drvdata->info.var.height = pdata->screen_height_mm;
|
|
drvdata->info.var.width = pdata->screen_width_mm;
|
|
drvdata->info.var.xres = pdata->xres;
|
|
drvdata->info.var.yres = pdata->yres;
|
|
drvdata->info.var.xres_virtual = pdata->xvirt;
|
|
drvdata->info.var.yres_virtual = pdata->yvirt;
|
|
|
|
/* Allocate a colour map */
|
|
rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
|
|
if (rc) {
|
|
dev_err(dev, "Fail to allocate colormap (%d entries)\n",
|
|
PALETTE_ENTRIES_NO);
|
|
goto err_cmap;
|
|
}
|
|
|
|
/* Register new frame buffer */
|
|
rc = register_framebuffer(&drvdata->info);
|
|
if (rc) {
|
|
dev_err(dev, "Could not register frame buffer\n");
|
|
goto err_regfb;
|
|
}
|
|
|
|
if (drvdata->flags & BUS_ACCESS_FLAG) {
|
|
/* Put a banner in the log (for DEBUG) */
|
|
dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
|
|
&drvdata->regs_phys, drvdata->regs);
|
|
}
|
|
/* Put a banner in the log (for DEBUG) */
|
|
dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
|
|
(unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
|
|
|
|
return 0; /* success */
|
|
|
|
err_regfb:
|
|
fb_dealloc_cmap(&drvdata->info.cmap);
|
|
|
|
err_cmap:
|
|
if (drvdata->fb_alloced)
|
|
dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
|
|
drvdata->fb_phys);
|
|
else
|
|
iounmap(drvdata->fb_virt);
|
|
|
|
/* Turn off the display */
|
|
xilinx_fb_out32(drvdata, REG_CTRL, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int xilinxfb_release(struct device *dev)
|
|
{
|
|
struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
|
|
|
|
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
|
|
xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
|
|
#endif
|
|
|
|
unregister_framebuffer(&drvdata->info);
|
|
|
|
fb_dealloc_cmap(&drvdata->info.cmap);
|
|
|
|
if (drvdata->fb_alloced)
|
|
dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
|
|
drvdata->fb_virt, drvdata->fb_phys);
|
|
else
|
|
iounmap(drvdata->fb_virt);
|
|
|
|
/* Turn off the display */
|
|
xilinx_fb_out32(drvdata, REG_CTRL, 0);
|
|
|
|
#ifdef CONFIG_PPC_DCR
|
|
/* Release the resources, as allocated based on interface */
|
|
if (!(drvdata->flags & BUS_ACCESS_FLAG))
|
|
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* OF bus binding
|
|
*/
|
|
|
|
static int xilinxfb_of_probe(struct platform_device *pdev)
|
|
{
|
|
const u32 *prop;
|
|
u32 tft_access = 0;
|
|
struct xilinxfb_platform_data pdata;
|
|
int size;
|
|
struct xilinxfb_drvdata *drvdata;
|
|
|
|
/* Copy with the default pdata (not a ptr reference!) */
|
|
pdata = xilinx_fb_default_pdata;
|
|
|
|
/* Allocate the driver data region */
|
|
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
|
|
if (!drvdata)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* To check whether the core is connected directly to DCR or BUS
|
|
* interface and initialize the tft_access accordingly.
|
|
*/
|
|
of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if",
|
|
&tft_access);
|
|
|
|
/*
|
|
* Fill the resource structure if its direct BUS interface
|
|
* otherwise fill the dcr_host structure.
|
|
*/
|
|
if (tft_access) {
|
|
drvdata->flags |= BUS_ACCESS_FLAG;
|
|
}
|
|
#ifdef CONFIG_PPC_DCR
|
|
else {
|
|
int start;
|
|
start = dcr_resource_start(pdev->dev.of_node, 0);
|
|
drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
|
|
drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
|
|
if (!DCR_MAP_OK(drvdata->dcr_host)) {
|
|
dev_err(&pdev->dev, "invalid DCR address\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
prop = of_get_property(pdev->dev.of_node, "phys-size", &size);
|
|
if ((prop) && (size >= sizeof(u32)*2)) {
|
|
pdata.screen_width_mm = prop[0];
|
|
pdata.screen_height_mm = prop[1];
|
|
}
|
|
|
|
prop = of_get_property(pdev->dev.of_node, "resolution", &size);
|
|
if ((prop) && (size >= sizeof(u32)*2)) {
|
|
pdata.xres = prop[0];
|
|
pdata.yres = prop[1];
|
|
}
|
|
|
|
prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size);
|
|
if ((prop) && (size >= sizeof(u32)*2)) {
|
|
pdata.xvirt = prop[0];
|
|
pdata.yvirt = prop[1];
|
|
}
|
|
|
|
if (of_find_property(pdev->dev.of_node, "rotate-display", NULL))
|
|
pdata.rotate_screen = 1;
|
|
|
|
dev_set_drvdata(&pdev->dev, drvdata);
|
|
return xilinxfb_assign(pdev, drvdata, &pdata);
|
|
}
|
|
|
|
static int xilinxfb_of_remove(struct platform_device *op)
|
|
{
|
|
return xilinxfb_release(&op->dev);
|
|
}
|
|
|
|
/* Match table for of_platform binding */
|
|
static struct of_device_id xilinxfb_of_match[] = {
|
|
{ .compatible = "xlnx,xps-tft-1.00.a", },
|
|
{ .compatible = "xlnx,xps-tft-2.00.a", },
|
|
{ .compatible = "xlnx,xps-tft-2.01.a", },
|
|
{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
|
|
{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
|
|
|
|
static struct platform_driver xilinxfb_of_driver = {
|
|
.probe = xilinxfb_of_probe,
|
|
.remove = xilinxfb_of_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = xilinxfb_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xilinxfb_of_driver);
|
|
|
|
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
|
|
MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
|
|
MODULE_LICENSE("GPL");
|