android_kernel_samsung_hero.../arch/arm/mach-at91/board-carmeva.c
2016-08-17 16:41:52 +08:00

167 lines
4.2 KiB
C

/*
* linux/arch/arm/mach-at91/board-carmeva.c
*
* Copyright (c) 2005 Peer Georgi
* Conitec Datasystems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
#include "gpio.h"
static void __init carmeva_init_early(void)
{
/* Initialize processor: 20.000 MHz crystal */
at91_initialize(20000000);
}
static struct macb_platform_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata carmeva_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata carmeva_udc_data = {
.vbus_pin = AT91_PIN_PD12,
.pullup_pin = AT91_PIN_PD9,
};
/* FIXME: user dependent */
// static struct at91_cf_data __initdata carmeva_cf_data = {
// .det_pin = AT91_PIN_PB0,
// .rst_pin = AT91_PIN_PC5,
// .irq_pin = -EINVAL,
// .vcc_pin = -EINVAL,
// };
static struct mci_platform_data __initdata carmeva_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PB10,
.wp_pin = AT91_PIN_PC14,
},
};
static struct spi_board_info carmeva_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 10 * 1000 * 1000,
},
{ /* User accessible spi - cs1 (250KHz) */
.modalias = "spi-cs1",
.chip_select = 1,
.max_speed_hz = 250 * 1000,
},
{ /* User accessible spi - cs2 (1MHz) */
.modalias = "spi-cs2",
.chip_select = 2,
.max_speed_hz = 1 * 1000 * 1000,
},
{ /* User accessible spi - cs3 (10MHz) */
.modalias = "spi-cs3",
.chip_select = 3,
.max_speed_hz = 10 * 1000 * 1000,
},
};
static struct gpio_led carmeva_leds[] = {
{ /* "user led 1", LED9 */
.name = "led9",
.gpio = AT91_PIN_PA21,
.active_low = 1,
.default_trigger = "heartbeat",
},
{ /* "user led 2", LED10 */
.name = "led10",
.gpio = AT91_PIN_PA25,
.active_low = 1,
},
{ /* "user led 3", LED11 */
.name = "led11",
.gpio = AT91_PIN_PA26,
.active_low = 1,
},
{ /* "user led 4", LED12 */
.name = "led12",
.gpio = AT91_PIN_PA18,
.active_low = 1,
}
};
static void __init carmeva_board_init(void)
{
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&carmeva_eth_data);
/* USB Host */
at91_add_device_usbh(&carmeva_usbh_data);
/* USB Device */
at91_add_device_udc(&carmeva_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
at91_add_device_mci(0, &carmeva_mci0_data);
/* LEDs */
at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
}
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = carmeva_init_early,
.init_irq = at91_init_irq_default,
.init_machine = carmeva_board_init,
MACHINE_END