android_kernel_samsung_hero.../arch/arm/mach-omap2/dpll3xxx.c
2016-08-17 16:41:52 +08:00

756 lines
19 KiB
C

/*
* OMAP3/4 - specific DPLL control functions
*
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Written by Paul Walmsley
* Testing and integration fixes by Jouni Högander
*
* 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
* Menon
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/clkdev.h>
#include "clockdomain.h"
#include "clock.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
#define MAX_DPLL_WAIT_TRIES 1000000
/* Private functions */
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
{
const struct dpll_data *dd;
u32 v;
dd = clk->dpll_data;
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->enable_mask;
v |= clken_bits << __ffs(dd->enable_mask);
omap2_clk_writel(v, clk, dd->control_reg);
}
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
{
const struct dpll_data *dd;
int i = 0;
int ret = -EINVAL;
const char *clk_name;
dd = clk->dpll_data;
clk_name = __clk_get_name(clk->hw.clk);
state <<= __ffs(dd->idlest_mask);
while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
!= state) && i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
}
if (i == MAX_DPLL_WAIT_TRIES) {
printk(KERN_ERR "clock: %s failed transition to '%s'\n",
clk_name, (state) ? "locked" : "bypassed");
} else {
pr_debug("clock: %s transition to '%s' in %d loops\n",
clk_name, (state) ? "locked" : "bypassed", i);
ret = 0;
}
return ret;
}
/* From 3430 TRM ES2 4.7.6.2 */
static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
{
unsigned long fint;
u16 f = 0;
fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
pr_debug("clock: fint is %lu\n", fint);
if (fint >= 750000 && fint <= 1000000)
f = 0x3;
else if (fint > 1000000 && fint <= 1250000)
f = 0x4;
else if (fint > 1250000 && fint <= 1500000)
f = 0x5;
else if (fint > 1500000 && fint <= 1750000)
f = 0x6;
else if (fint > 1750000 && fint <= 2100000)
f = 0x7;
else if (fint > 7500000 && fint <= 10000000)
f = 0xB;
else if (fint > 10000000 && fint <= 12500000)
f = 0xC;
else if (fint > 12500000 && fint <= 15000000)
f = 0xD;
else if (fint > 15000000 && fint <= 17500000)
f = 0xE;
else if (fint > 17500000 && fint <= 21000000)
f = 0xF;
else
pr_debug("clock: unknown freqsel setting for %d\n", n);
return f;
}
/*
* _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
* readiness before returning. Will save and restore the DPLL's
* autoidle state across the enable, per the CDP code. If the DPLL
* locked successfully, return 0; if the DPLL did not lock in the time
* allotted, or DPLL3 was passed in, return -EINVAL.
*/
static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u8 ai;
u8 state = 1;
int r = 0;
pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
dd = clk->dpll_data;
state <<= __ffs(dd->idlest_mask);
/* Check if already locked */
if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
goto done;
ai = omap3_dpll_autoidle_read(clk);
if (ai)
omap3_dpll_deny_idle(clk);
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
r = _omap3_wait_dpll_status(clk, 1);
if (ai)
omap3_dpll_allow_idle(clk);
done:
return r;
}
/*
* _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enter low-power bypass mode. In
* bypass mode, the DPLL's rate is set equal to its parent clock's
* rate. Waits for the DPLL to report readiness before returning.
* Will save and restore the DPLL's autoidle state across the enable,
* per the CDP code. If the DPLL entered bypass mode successfully,
* return 0; if the DPLL did not enter bypass in the time allotted, or
* DPLL3 was passed in, or the DPLL does not support low-power bypass,
* return -EINVAL.
*/
static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
{
int r;
u8 ai;
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
return -EINVAL;
pr_debug("clock: configuring DPLL %s for low-power bypass\n",
__clk_get_name(clk->hw.clk));
ai = omap3_dpll_autoidle_read(clk);
_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
r = _omap3_wait_dpll_status(clk, 0);
if (ai)
omap3_dpll_allow_idle(clk);
return r;
}
/*
* _omap3_noncore_dpll_stop - instruct a DPLL to stop
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enter low-power stop. Will save and
* restore the DPLL's autoidle state across the stop, per the CDP
* code. If DPLL3 was passed in, or the DPLL does not support
* low-power stop, return -EINVAL; otherwise, return 0.
*/
static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
{
u8 ai;
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
return -EINVAL;
pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
ai = omap3_dpll_autoidle_read(clk);
_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
if (ai)
omap3_dpll_allow_idle(clk);
return 0;
}
/**
* _lookup_dco - Lookup DCO used by j-type DPLL
* @clk: pointer to a DPLL struct clk
* @dco: digital control oscillator selector
* @m: DPLL multiplier to set
* @n: DPLL divider to set
*
* See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
*
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
{
unsigned long fint, clkinp; /* watch out for overflow */
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
fint = (clkinp / n) * m;
if (fint < 1000000000)
*dco = 2;
else
*dco = 4;
}
/**
* _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
* @clk: pointer to a DPLL struct clk
* @sd_div: target sigma-delta divider
* @m: DPLL multiplier to set
* @n: DPLL divider to set
*
* See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
*
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
{
unsigned long clkinp, sd; /* watch out for overflow */
int mod1, mod2;
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
/*
* target sigma-delta to near 250MHz
* sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
*/
clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
mod1 = (clkinp * m) % (250 * n);
sd = (clkinp * m) / (250 * n);
mod2 = sd % 10;
sd /= 10;
if (mod1 || mod2)
sd++;
*sd_div = sd;
}
/*
* _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
* @clk: struct clk * of DPLL to set
* @freqsel: FREQSEL value to set
*
* Program the DPLL with the last M, N values calculated, and wait for
* the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
*/
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
{
struct dpll_data *dd = clk->dpll_data;
u8 dco, sd_div;
u32 v;
/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
_omap3_noncore_dpll_bypass(clk);
/*
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
omap2_clk_writel(v, clk, dd->control_reg);
}
/* Set DPLL multiplier, divider */
v = omap2_clk_readl(clk, dd->mult_div1_reg);
/* Handle Duty Cycle Correction */
if (dd->dcc_mask) {
if (dd->last_rounded_rate >= dd->dcc_rate)
v |= dd->dcc_mask; /* Enable DCC */
else
v &= ~dd->dcc_mask; /* Disable DCC */
}
v &= ~(dd->mult_mask | dd->div1_mask);
v |= dd->last_rounded_m << __ffs(dd->mult_mask);
v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
/* Configure dco and sd_div for dplls that have these fields */
if (dd->dco_mask) {
_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
v &= ~(dd->dco_mask);
v |= dco << __ffs(dd->dco_mask);
}
if (dd->sddiv_mask) {
_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
dd->last_rounded_n);
v &= ~(dd->sddiv_mask);
v |= sd_div << __ffs(dd->sddiv_mask);
}
omap2_clk_writel(v, clk, dd->mult_div1_reg);
/* Set 4X multiplier and low-power mode */
if (dd->m4xen_mask || dd->lpmode_mask) {
v = omap2_clk_readl(clk, dd->control_reg);
if (dd->m4xen_mask) {
if (dd->last_rounded_m4xen)
v |= dd->m4xen_mask;
else
v &= ~dd->m4xen_mask;
}
if (dd->lpmode_mask) {
if (dd->last_rounded_lpmode)
v |= dd->lpmode_mask;
else
v &= ~dd->lpmode_mask;
}
omap2_clk_writel(v, clk, dd->control_reg);
}
/* We let the clock framework set the other output dividers later */
/* REVISIT: Set ramp-up delay? */
_omap3_noncore_dpll_lock(clk);
return 0;
}
/* Public functions */
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
*
* Recalculate and propagate the DPLL rate.
*/
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
return omap2_get_dpll_rate(clk);
}
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/**
* omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
* The choice of modes depends on the DPLL's programmed rate: if it is
* the same as the DPLL's parent clock, it will enter bypass;
* otherwise, it will enter lock. This code will wait for the DPLL to
* indicate readiness before returning, unless the DPLL takes too long
* to enter the target state. Intended to be used as the struct clk's
* enable function. If DPLL3 was passed in, or the DPLL does not
* support low-power stop, or if the DPLL took too long to enter
* bypass or lock, return -EINVAL; otherwise, return 0.
*/
int omap3_noncore_dpll_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int r;
struct dpll_data *dd;
struct clk *parent;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (clk->clkdm) {
r = clkdm_clk_enable(clk->clkdm, hw->clk);
if (r) {
WARN(1,
"%s: could not enable %s's clockdomain %s: %d\n",
__func__, __clk_get_name(hw->clk),
clk->clkdm->name, r);
return r;
}
}
parent = __clk_get_parent(hw->clk);
if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
WARN_ON(parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
} else {
WARN_ON(parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
}
return r;
}
/**
* omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enter low-power stop. This function is
* intended for use in struct clkops. No return value.
*/
void omap3_noncore_dpll_disable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
_omap3_noncore_dpll_stop(clk);
if (clk->clkdm)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
/* Non-CORE DPLL rate set code */
/**
* omap3_noncore_dpll_set_rate - set non-core DPLL rate
* @clk: struct clk * of DPLL to set
* @rate: rounded target rate
*
* Set the DPLL CLKOUT to the target rate. If the DPLL can enter
* low-power bypass, and the target rate is the bypass source clock
* rate, then configure the DPLL for bypass. Otherwise, round the
* target rate if it hasn't been done already, then program and lock
* the DPLL. Returns -EINVAL upon error, or 0 upon success.
*/
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct clk *new_parent = NULL;
unsigned long rrate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
if (!hw || !rate)
return -EINVAL;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("%s: %s: set rate: entering bypass.\n",
__func__, __clk_get_name(hw->clk));
__clk_prepare(dd->clk_bypass);
clk_enable(dd->clk_bypass);
ret = _omap3_noncore_dpll_bypass(clk);
if (!ret)
new_parent = dd->clk_bypass;
clk_disable(dd->clk_bypass);
__clk_unprepare(dd->clk_bypass);
} else {
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
/* XXX this check is probably pointless in the CCF context */
if (dd->last_rounded_rate != rate) {
rrate = __clk_round_rate(hw->clk, rate);
if (rrate != rate) {
pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
__func__, __clk_get_name(hw->clk),
rrate, rate);
rate = rrate;
}
}
if (dd->last_rounded_rate == 0)
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
}
pr_debug("%s: %s: set rate: locking rate to %lu.\n",
__func__, __clk_get_name(hw->clk), rate);
ret = omap3_noncore_dpll_program(clk, freqsel);
if (!ret)
new_parent = dd->clk_ref;
clk_disable(dd->clk_ref);
__clk_unprepare(dd->clk_ref);
}
/*
* FIXME - this is all wrong. common code handles reparenting and
* migrating prepare/enable counts. dplls should be a multiplexer
* clock and this should be a set_parent operation so that all of that
* stuff is inherited for free
*/
if (!ret && clk_get_parent(hw->clk) != new_parent)
__clk_reparent(hw->clk, new_parent);
return 0;
}
/* DPLL autoidle read/set code */
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read
*
* Return the DPLL's autoidle bits, shifted down to bit 0. Returns
* -EINVAL if passed a null pointer or if the struct clk does not
* appear to refer to a DPLL.
*/
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
if (!clk || !clk->dpll_data)
return -EINVAL;
dd = clk->dpll_data;
if (!dd->autoidle_reg)
return -EINVAL;
v = omap2_clk_readl(clk, dd->autoidle_reg);
v &= dd->autoidle_mask;
v >>= __ffs(dd->autoidle_mask);
return v;
}
/**
* omap3_dpll_allow_idle - enable DPLL autoidle bits
* @clk: struct clk * of the DPLL to operate on
*
* Enable DPLL automatic idle control. This automatic idle mode
* switching takes effect only when the DPLL is locked, at least on
* OMAP3430. The DPLL will enter low-power stop when its downstream
* clocks are gated. No return value.
*/
void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
if (!clk || !clk->dpll_data)
return;
dd = clk->dpll_data;
if (!dd->autoidle_reg)
return;
/*
* REVISIT: CORE DPLL can optionally enter low-power bypass
* by writing 0x5 instead of 0x1. Add some mechanism to
* optionally enter this mode.
*/
v = omap2_clk_readl(clk, dd->autoidle_reg);
v &= ~dd->autoidle_mask;
v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
omap2_clk_writel(v, clk, dd->autoidle_reg);
}
/**
* omap3_dpll_deny_idle - prevent DPLL from automatically idling
* @clk: struct clk * of the DPLL to operate on
*
* Disable DPLL automatic idle control. No return value.
*/
void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
if (!clk || !clk->dpll_data)
return;
dd = clk->dpll_data;
if (!dd->autoidle_reg)
return;
v = omap2_clk_readl(clk, dd->autoidle_reg);
v &= ~dd->autoidle_mask;
v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
omap2_clk_writel(v, clk, dd->autoidle_reg);
}
/* Clock control for DPLL outputs */
/* Find the parent DPLL for the given clkoutx2 clock */
static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
{
struct clk_hw_omap *pclk = NULL;
struct clk *parent;
/* Walk up the parents of clk, looking for a DPLL */
do {
do {
parent = __clk_get_parent(hw->clk);
hw = __clk_get_hw(parent);
} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
if (!hw)
break;
pclk = to_clk_hw_omap(hw);
} while (pclk && !pclk->dpll_data);
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
WARN_ON(1);
return NULL;
}
return pclk;
}
/**
* omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
* @clk: DPLL output struct clk
*
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
const struct dpll_data *dd;
unsigned long rate;
u32 v;
struct clk_hw_omap *pclk = NULL;
if (!parent_rate)
return 0;
pclk = omap3_find_clkoutx2_dpll(hw);
if (!pclk)
return 0;
dd = pclk->dpll_data;
WARN_ON(!dd->enable_mask);
v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
rate = parent_rate;
else
rate = parent_rate * 2;
return rate;
}
int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
return 0;
}
long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
const struct dpll_data *dd;
u32 v;
struct clk_hw_omap *pclk = NULL;
if (!*prate)
return 0;
pclk = omap3_find_clkoutx2_dpll(hw);
if (!pclk)
return 0;
dd = pclk->dpll_data;
/* TYPE J does not have a clkoutx2 */
if (dd->flags & DPLL_J_TYPE) {
*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
return *prate;
}
WARN_ON(!dd->enable_mask);
v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
/* If in bypass, the rate is fixed to the bypass rate*/
if (v != OMAP3XXX_EN_DPLL_LOCKED)
return *prate;
if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
unsigned long best_parent;
best_parent = (rate / 2);
*prate = __clk_round_rate(__clk_get_parent(hw->clk),
best_parent);
}
return *prate * 2;
}
/* OMAP3/4 non-CORE DPLL clkops */
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};