android_kernel_samsung_hero.../drivers/hwmon/pmbus/ucd9000.c
2016-08-17 16:41:52 +08:00

246 lines
6.2 KiB
C

/*
* Hardware monitoring driver for UCD90xxx Sequencer and System Health
* Controller series
*
* Copyright (C) 2011 Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c/pmbus.h>
#include "pmbus.h"
enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 };
#define UCD9000_MONITOR_CONFIG 0xd5
#define UCD9000_NUM_PAGES 0xd6
#define UCD9000_FAN_CONFIG_INDEX 0xe7
#define UCD9000_FAN_CONFIG 0xe8
#define UCD9000_DEVICE_ID 0xfd
#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
#define UCD9000_MON_VOLTAGE 1
#define UCD9000_MON_TEMPERATURE 2
#define UCD9000_MON_CURRENT 3
#define UCD9000_MON_VOLTAGE_HW 4
#define UCD9000_NUM_FAN 4
struct ucd9000_data {
u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
struct pmbus_driver_info info;
};
#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
{
int fan_config = 0;
struct ucd9000_data *data
= to_ucd9000_data(pmbus_get_driver_info(client));
if (data->fan_data[fan][3] & 1)
fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */
/* Pulses/revolution */
fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
return fan_config;
}
static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
{
int ret = 0;
int fan_config;
switch (reg) {
case PMBUS_FAN_CONFIG_12:
if (page > 0)
return -ENXIO;
ret = ucd9000_get_fan_config(client, 0);
if (ret < 0)
return ret;
fan_config = ret << 4;
ret = ucd9000_get_fan_config(client, 1);
if (ret < 0)
return ret;
fan_config |= ret;
ret = fan_config;
break;
case PMBUS_FAN_CONFIG_34:
if (page > 0)
return -ENXIO;
ret = ucd9000_get_fan_config(client, 2);
if (ret < 0)
return ret;
fan_config = ret << 4;
ret = ucd9000_get_fan_config(client, 3);
if (ret < 0)
return ret;
fan_config |= ret;
ret = fan_config;
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static const struct i2c_device_id ucd9000_id[] = {
{"ucd9000", ucd9000},
{"ucd90120", ucd90120},
{"ucd90124", ucd90124},
{"ucd9090", ucd9090},
{"ucd90910", ucd90910},
{}
};
MODULE_DEVICE_TABLE(i2c, ucd9000_id);
static int ucd9000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
struct ucd9000_data *data;
struct pmbus_driver_info *info;
const struct i2c_device_id *mid;
int i, ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA))
return -ENODEV;
ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
block_buffer);
if (ret < 0) {
dev_err(&client->dev, "Failed to read device ID\n");
return ret;
}
block_buffer[ret] = '\0';
dev_info(&client->dev, "Device ID %s\n", block_buffer);
for (mid = ucd9000_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
if (!mid->name[0]) {
dev_err(&client->dev, "Unsupported device\n");
return -ENODEV;
}
if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data)
dev_notice(&client->dev,
"Device mismatch: Configured %s, detected %s\n",
id->name, mid->name);
data = devm_kzalloc(&client->dev, sizeof(struct ucd9000_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
info = &data->info;
ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
if (ret < 0) {
dev_err(&client->dev,
"Failed to read number of active pages\n");
return ret;
}
info->pages = ret;
if (!info->pages) {
dev_err(&client->dev, "No pages configured\n");
return -ENODEV;
}
/* The internal temperature sensor is always active */
info->func[0] = PMBUS_HAVE_TEMP;
/* Everything else is configurable */
ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
block_buffer);
if (ret <= 0) {
dev_err(&client->dev, "Failed to read configuration data\n");
return -ENODEV;
}
for (i = 0; i < ret; i++) {
int page = UCD9000_MON_PAGE(block_buffer[i]);
if (page >= info->pages)
continue;
switch (UCD9000_MON_TYPE(block_buffer[i])) {
case UCD9000_MON_VOLTAGE:
case UCD9000_MON_VOLTAGE_HW:
info->func[page] |= PMBUS_HAVE_VOUT
| PMBUS_HAVE_STATUS_VOUT;
break;
case UCD9000_MON_TEMPERATURE:
info->func[page] |= PMBUS_HAVE_TEMP2
| PMBUS_HAVE_STATUS_TEMP;
break;
case UCD9000_MON_CURRENT:
info->func[page] |= PMBUS_HAVE_IOUT
| PMBUS_HAVE_STATUS_IOUT;
break;
default:
break;
}
}
/* Fan configuration */
if (mid->driver_data == ucd90124) {
for (i = 0; i < UCD9000_NUM_FAN; i++) {
i2c_smbus_write_byte_data(client,
UCD9000_FAN_CONFIG_INDEX, i);
ret = i2c_smbus_read_block_data(client,
UCD9000_FAN_CONFIG,
data->fan_data[i]);
if (ret < 0)
return ret;
}
i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
info->read_byte_data = ucd9000_read_byte_data;
info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
| PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
}
return pmbus_do_probe(client, mid, info);
}
/* This is the driver that will be inserted */
static struct i2c_driver ucd9000_driver = {
.driver = {
.name = "ucd9000",
},
.probe = ucd9000_probe,
.remove = pmbus_do_remove,
.id_table = ucd9000_id,
};
module_i2c_driver(ucd9000_driver);
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
MODULE_LICENSE("GPL");