android_kernel_samsung_hero.../include/linux/i2c/i2c-msm-v2.h
2016-08-17 16:41:52 +08:00

661 lines
21 KiB
C

/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
/*
* I2C controller driver for Qualcomm Technologies Inc platforms
*/
#ifndef _I2C_MSM_V2_H
#define _I2C_MSM_V2_H
#include <linux/bitops.h>
#include <linux/dmaengine.h>
enum msm_i2_debug_level {
MSM_ERR, /* Error messages only. Always on */
MSM_PROF, /* High level events. Use for profiling */
MSM_DBG, /* Low level details. Use for debugging */
};
#define i2c_msm_dbg(ctrl, dbg_level, fmt, ...) do {\
if (ctrl->dbgfs.dbg_lvl >= dbg_level)\
dev_info(ctrl->dev, pr_fmt(fmt), ##__VA_ARGS__);\
} while (0)
#define BIT_IS_SET(val, idx) ((val >> idx) & 0x1)
#define BITS_AT(val, idx, n_bits)(((val) & (((1 << n_bits) - 1) << idx)) >> idx)
#define MASK_IS_SET(val, mask) ((val & mask) == mask)
#define MASK_IS_SET_BOOL(val, mask) (MASK_IS_SET(val, mask) ? 1 : 0)
#define KHz(freq) (1000 * freq)
#define I2C_MSM_CLK_FAST_PLUS_FREQ (1000000)
/* QUP Registers */
enum {
QUP_CONFIG = 0x0,
QUP_STATE = 0x4,
QUP_IO_MODES = 0x8,
QUP_SW_RESET = 0xC,
QUP_OPERATIONAL = 0x18,
QUP_ERROR_FLAGS = 0x1C,
QUP_ERROR_FLAGS_EN = 0x20,
QUP_TEST_CTRL = 0x24,
QUP_OPERATIONAL_MASK = 0x28,
QUP_HW_VERSION = 0x30,
QUP_MX_READ_COUNT = 0x208,
QUP_MX_WRITE_COUNT = 0x150,
QUP_MX_OUTPUT_COUNT = 0x100,
QUP_MX_INPUT_COUNT = 0x200,
QUP_MX_WR_CNT = 0x100,
QUP_OUT_DEBUG = 0x108,
QUP_OUT_FIFO_CNT = 0x10C,
QUP_OUT_FIFO_BASE = 0x110,
QUP_IN_READ_CUR = 0x20C,
QUP_IN_DEBUG = 0x210,
QUP_IN_FIFO_CNT = 0x214,
QUP_IN_FIFO_BASE = 0x218,
QUP_I2C_MASTER_CLK_CTL = 0x400,
QUP_I2C_STATUS = 0x404,
QUP_I2C_MASTER_CONFIG = 0x408,
QUP_I2C_MASTER_BUS_CLR = 0x40C,
};
/* Register:QUP_STATE state field values */
enum i2c_msm_qup_state {
QUP_STATE_RESET = 0,
QUP_STATE_RUN = 1U,
QUP_STATE_PAUSE = 3U,
};
/* Register:QUP_STATE fields */
enum {
QUP_STATE_MASK = 3U,
QUP_STATE_VALID = BIT(2),
QUP_I2C_MAST_GEN = BIT(4),
QUP_I2C_FLUSH = BIT(6),
QUP_I2C_STATUS_RESET = 0x42,
};
/* Register:QUP_CONFIG fields */
enum {
QUP_MINI_CORE_MASK = 0xF00,
QUP_MINI_CORE_I2C_VAL = 0x200,
QUP_N_MASK = 0x1F,
QUP_N_VAL = 0x7, /* 0xF for A family */
QUP_NO_OUPUT = BIT(6),
QUP_NO_INPUT = BIT(7),
QUP_APP_CLK_ON_EN = BIT(12),
QUP_CORE_CLK_ON_EN = BIT(13),
QUP_FIFO_CLK_GATE_EN = BIT(14),
};
/* Register:QUP_OPERATIONAL fields */
enum {
QUP_INPUT_FIFO_NOT_EMPTY = BIT(5),
QUP_OUTPUT_SERVICE_FLAG = BIT(8),
QUP_INPUT_SERVICE_FLAG = BIT(9),
QUP_MAX_OUTPUT_DONE_FLAG = BIT(10),
QUP_MAX_INPUT_DONE_FLAG = BIT(11),
QUP_OUT_BLOCK_WRITE_REQ = BIT(12),
QUP_IN_BLOCK_READ_REQ = BIT(13),
};
/* Register:QUP_OPERATIONAL_MASK fields */
enum {
QUP_INPUT_SERVICE_MASK = BIT(9),
QUP_OUTPUT_SERVICE_MASK = BIT(8),
};
/* Register:QUP_IO_MODES fields */
enum {
QUP_OUTPUT_MODE = BIT(10) | BIT(11),
QUP_INPUT_MODE = BIT(12) | BIT(13),
QUP_UNPACK_EN = BIT(14),
QUP_PACK_EN = BIT(15),
QUP_OUTPUT_BIT_SHIFT_EN = BIT(16),
};
/* Register:QUP_I2C_STATUS (a.k.a I2C_MASTER_STATUS) fields */
enum {
QUP_BUS_ERROR = BIT(2),
QUP_PACKET_NACKED = BIT(3),
QUP_ARB_LOST = BIT(4),
QUP_INVALID_WRITE = BIT(5),
QUP_FAILED = BIT(6),
QUP_BUS_ACTIVE = BIT(8),
QUP_BUS_MASTER = BIT(9),
QUP_INVALID_TAG = BIT(23),
QUP_INVALID_READ_ADDR = BIT(24),
QUP_INVALID_READ_SEQ = BIT(25),
QUP_I2C_SDA = BIT(26),
QUP_I2C_SCL = BIT(27),
QUP_MSTR_STTS_ERR_MASK = 0x380003C,
};
/* Register:QUP_I2C_MASTER_CONFIG fields */
enum {
QUP_EN_VERSION_TWO_TAG = 1U,
};
/* Register:QUP_I2C_MASTER_CLK_CTL field setters */
#define I2C_MSM_SCL_NOISE_REJECTION(reg_val, noise_rej_val) \
(((reg_val) & ~(0x3 << 24)) | (((noise_rej_val) & 0x3) << 24))
#define I2C_MSM_SDA_NOISE_REJECTION(reg_val, noise_rej_val) \
(((reg_val) & ~(0x3 << 26)) | (((noise_rej_val) & 0x3) << 26))
/* Register:QUP_ERROR_FLAGS_EN flags */
enum {
QUP_OUTPUT_OVER_RUN_ERR_EN = BIT(5),
QUP_INPUT_UNDER_RUN_ERR_EN = BIT(4),
QUP_OUTPUT_UNDER_RUN_ERR_EN = BIT(3),
QUP_INPUT_OVER_RUN_ERR_EN = BIT(2),
};
/* Status, Error flags */
enum {
I2C_STATUS_WR_BUFFER_FULL = BIT(0),
I2C_STATUS_BUS_ACTIVE = BIT(8),
I2C_STATUS_BUS_MASTER = BIT(9),
I2C_STATUS_ERROR_MASK = 0x38000FC,
QUP_I2C_NACK_FLAG = BIT(3),
QUP_IN_NOT_EMPTY = BIT(5),
QUP_ERR_FLGS_MASK = 0x3C,
};
/* Master status clock states */
enum {
I2C_CLK_RESET_BUSIDLE_STATE = 0,
I2C_CLK_FORCED_LOW_STATE = 5,
};
/* Controller's power state */
enum i2c_msm_power_state {
I2C_MSM_PM_RT_ACTIVE,
I2C_MSM_PM_RT_SUSPENDED,
I2C_MSM_PM_SYS_SUSPENDED
};
/*
* The max buffer size required for tags is for holding the following sequence:
* [start] + [start | slv-addr] + [ rd/wr | len]
* which sum up to 6 bytes. However, we use u64 to hold the value, thus we say
* that max length is 8 bytes.
*/
#define I2C_MSM_TAG2_MAX_LEN (4)
#define I2C_MSM_DMA_TX_SZ (64) /* tx chan n entries */
#define I2C_MSM_DMA_RX_SZ (32) /* rx chan n entries */
#define I2C_MSM_DMA_DESC_ARR_SIZ (I2C_MSM_DMA_TX_SZ + I2C_MSM_DMA_RX_SZ)
#define I2C_MSM_REG_2_STR_BUF_SZ (128)
/* Optimal value to hold the error strings */
#define I2C_MSM_MAX_ERR_BUF_SZ (256)
#define I2C_MSM_BUF_DUMP_MAX_BC (20)
#define I2C_MSM_MAX_POLL_MSEC (100)
#define I2C_MSM_TIMEOUT_SAFTY_COEF (10)
#define I2C_MSM_TIMEOUT_MIN_USEC (500000)
#define I2C_QUP_MAX_BUS_RECOVERY_RETRY (10)
/* QUP v2 tags */
#define QUP_TAG2_DATA_WRITE (0x82ULL)
#define QUP_TAG2_DATA_WRITE_N_STOP (0x83ULL)
#define QUP_TAG2_DATA_READ (0x85ULL)
#define QUP_TAG2_DATA_READ_N_STOP (0x87ULL)
#define QUP_TAG2_START (0x81ULL)
#define QUP_TAG2_DATA_READ_N_NACK (0x86ULL)
#define QUP_TAG2_START_STOP (0x8AULL)
#define QUP_TAG2_INPUT_EOT (0x93ULL)
#define QUP_TAG2_FLUSH_STOP (0x96ULL)
#define QUP_BUF_OVERHD_BC (2)
#define QUP_MAX_BUF_SZ (256)
enum i2c_msm_clk_path_vec_idx {
I2C_MSM_CLK_PATH_SUSPEND_VEC,
I2C_MSM_CLK_PATH_RESUME_VEC,
};
#define I2C_MSM_CLK_PATH_AVRG_BW(ctrl) (0)
#define I2C_MSM_CLK_PATH_BRST_BW(ctrl) (ctrl->rsrcs.clk_freq_in * 8)
enum i2c_msm_gpio_name_idx {
I2C_MSM_GPIO_SCL,
I2C_MSM_GPIO_SDA,
};
extern const char * const i2c_msm_mode_str_tbl[];
struct i2c_msm_ctrl;
/*
* i2c_msm_dma_mem: utility struct which holds both physical and virtual addr
*/
struct i2c_msm_dma_mem {
dma_addr_t phy_addr;
void *vrtl_addr;
};
/*
* i2c_msm_tag: tag's data and its length.
*
* @len tag len can be two, four or six bytes.
*/
struct i2c_msm_tag {
u64 val;
int len;
};
/*
* i2c_msm_dma_tag: similar to struct i2c_msm_tag but holds physical address.
*
* @buf physical address of entry in the tag_arr of
* struct i2c_msm_xfer_mode_dma
* @len tag len.
*
* Hold the information from i2c_msm_dma_xfer_prepare() which is used by
* i2c_msm_dma_xfer_process() and freed by i2c_msm_dma_xfer_unprepare()
*/
struct i2c_msm_dma_tag {
dma_addr_t buf;
size_t len;
};
/*
* i2c_msm_dma_buf: dma mapped pointer to i2c_msg data buffer and related tag
* @vir_addr ptr to i2c_msg buf beginning or with offset (when buf len > 256)
*/
struct i2c_msm_dma_buf {
struct i2c_msm_dma_mem ptr;
enum dma_data_direction dma_dir;
size_t len;
bool is_rx;
bool is_last;
struct i2c_msm_dma_tag tag;
/* DMA API */
struct scatterlist sg_list[2];
};
/*
* i2c_msm_dma_chan: per channel info
*
* @is_init true when the channel is initialized and requires eventual teardown.
* @name channel name (tx/rx) for debugging.
* @desc_cnt_cur number of occupied descriptors
*/
struct i2c_msm_dma_chan {
bool is_init;
const char *name;
size_t desc_cnt_cur;
struct dma_chan *dma_chan;
enum dma_transfer_direction dir;
};
enum i2c_msm_dma_chan_dir {
I2C_MSM_DMA_TX,
I2C_MSM_DMA_RX,
I2C_MSM_DMA_CNT,
};
enum i2c_msm_dma_state {
I2C_MSM_DMA_INIT_NONE, /* Uninitialized DMA */
I2C_MSM_DMA_INIT_CORE, /* Core init not channels, memory Allocated */
I2C_MSM_DMA_INIT_CHAN, /* Both Core and channels are init */
};
/*
* struct i2c_msm_xfer_mode_dma: DMA mode configuration and work space
*
* @state specifies the DMA core and channel initialization states.
* @buf_arr_cnt current number of valid buffers in buf_arr. The valid buffers
* are at index 0..buf_arr_cnt excluding buf_arr_cnt.
* @buf_arr array of descriptors which point to the user's buffer
* virtual and physical address, and hold meta data about the buffer
* and respective tag.
* @tag_arr array of tags in DMAable memory. Holds a tag per buffer of the same
* index, that is tag_arr[i] is related to buf_arr[i]. Also, tag_arr[i]
* is queued in the tx channel just befor buf_arr[i] is queued in
* the tx (output buf) or rx channel (input buffer).
* @eot_n_flush_stop_tags EOT and flush-stop tags to be queued to the tx
* DMA channel after the last transfer when it is a read.
* @input_tag hw is placing input tags in the rx channel on read operations.
* The value of these tags is "don't care" from DMA transfer
* perspective. Thus, this single buffer is used for all the input
* tags. The field is used as write only.
*/
struct i2c_msm_xfer_mode_dma {
enum i2c_msm_dma_state state;
size_t buf_arr_cnt;
struct i2c_msm_dma_buf buf_arr[I2C_MSM_DMA_DESC_ARR_SIZ];
struct i2c_msm_dma_mem tag_arr;
struct i2c_msm_dma_mem eot_n_flush_stop_tags;
struct i2c_msm_dma_mem input_tag;
struct i2c_msm_dma_chan chan[I2C_MSM_DMA_CNT];
};
/*
* I2C_MSM_DMA_TAG_MEM_SZ includes the following fields of
* struct i2c_msm_xfer_mode_dma (in order):
*
* Buffer of DMA memory:
* +-----------+---------+-----------+-----------+----+-----------+
* | input_tag | eot_... | tag_arr 0 | tag_arr 1 | .. | tag_arr n |
* +-----------+---------+-----------+-----------+----+-----------+
*
* Why +2?
* One tag buffer for the input tags. This is a write only buffer for DMA, it is
* used to read the tags of the input fifo. We let them overwrite each other,
* since it is a throw-away from the driver's perspective.
* Second tag buffer for the EOT and flush-stop tags. This is a read only
* buffer (from DMA perspective). It is used to put EOT and flush-stop at the
* end of every transaction.
*/
#define I2C_MSM_DMA_TAG_MEM_SZ \
((I2C_MSM_DMA_DESC_ARR_SIZ + 2) * I2C_MSM_TAG2_MAX_LEN)
/*
* i2c_msm_xfer_mode_fifo: operations and state of FIFO mode
*
* @ops "base class" of i2c_msm_xfer_mode_dma. Contains the operations while
* the rest of the fields contain the data.
* @input_fifo_sz input fifo size in bytes
* @output_fifo_sz output fifo size in bytes
* @in_rem remaining u32 entries in input FIFO before empty
* @out_rem remaining u32 entries in output FIFO before full
* @out_buf buffer for collecting bytes to four bytes groups (u32) before
* writing them to the output fifo.
* @out_buf_idx next free index in out_buf. 0..3
*/
struct i2c_msm_xfer_mode_fifo {
size_t input_fifo_sz;
size_t output_fifo_sz;
size_t in_rem;
size_t out_rem;
u8 out_buf[4];
int out_buf_idx;
};
/* i2c_msm_xfer_mode_blk: operations and state of Block mode
*
* @is_init when true, struct is initialized and requires mem free on exit
* @in_blk_sz size of input/rx block
* @out_blk_sz size of output/tx block
* @tx_cache internal buffer to store tx data
* @rx_cache internal buffer to store rx data
* @rx_cache_idx points to the next unread index in rx cache
* @tx_cache_idx points to the next unwritten index in tx cache
* @wait_rx_blk completion object to wait on for end of blk rx transfer.
* @wait_tx_blk completion object to wait on for end of blk tx transfer.
* @complete_mask applied to QUP_OPERATIONAL to determine when blk
* xfer is complete.
*/
struct i2c_msm_xfer_mode_blk {
bool is_init;
size_t in_blk_sz;
size_t out_blk_sz;
u8 *tx_cache;
u8 *rx_cache;
int rx_cache_idx;
int tx_cache_idx;
struct completion wait_rx_blk;
struct completion wait_tx_blk;
u32 complete_mask;
};
/* INPUT_MODE and OUTPUT_MODE filds of QUP_IO_MODES register */
enum i2c_msm_xfer_mode_id {
I2C_MSM_XFER_MODE_FIFO,
I2C_MSM_XFER_MODE_BLOCK,
I2C_MSM_XFER_MODE_DMA,
I2C_MSM_XFER_MODE_NONE, /* keep last as a counter */
};
struct i2c_msm_dbgfs {
struct dentry *root;
enum msm_i2_debug_level dbg_lvl;
enum i2c_msm_xfer_mode_id force_xfer_mode;
};
/*
* qup_i2c_clk_path_vote: data to use bus scaling driver for clock path vote
*
* @mstr_id master id number of the i2c core or its wrapper (BLSP/GSBI).
* When zero, clock path voting is disabled.
* @client_hdl when zero, client is not registered with the bus scaling driver,
* and bus scaling functionality should not be used. When non zero, it
* is a bus scaling client id and may be used to vote for clock path.
* @reg_err when true, registration error was detected and an error message was
* logged. i2c will attempt to re-register but will log error only once.
* once registration succeed, the flag is set to false.
* @actv_only when set, votes when system active and removes the vote when
* system goes idle (optimises for performance). When unset, voting using
* runtime pm (optimizes for power).
*/
struct qup_i2c_clk_path_vote {
u32 mstr_id;
u32 client_hdl;
struct msm_bus_scale_pdata *pdata;
bool reg_err;
bool actv_only;
};
/*
* i2c_msm_resources: OS resources
*
* @mem I2C controller memory resource from platform data.
* @base I2C controller virtual base address
* @clk_freq_in core clock frequency in Hz
* @clk_freq_out bus clock frequency in Hz
*/
struct i2c_msm_resources {
struct resource *mem;
void __iomem *base; /* virtual */
struct clk *core_clk;
struct clk *iface_clk;
int clk_freq_in;
int clk_freq_out;
struct qup_i2c_clk_path_vote clk_path_vote;
int irq;
bool disable_dma;
struct pinctrl *pinctrl;
struct pinctrl_state *gpio_state_active;
struct pinctrl_state *gpio_state_suspend;
};
#define I2C_MSM_PINCTRL_ACTIVE "i2c_active"
#define I2C_MSM_PINCTRL_SUSPEND "i2c_sleep"
/*
* i2c_msm_xfer_buf: current xfer position and preprocessed tags
*
* @is_init the buf is marked initialized by the first call to
* i2c_msm_xfer_next_buf()
* @msg_idx index of the message that the buffer is pointing to
* @byte_idx index of first byte in the current buffer
* @end_idx count of bytes processed from the current message. This value
* is compared against len to find out if buffer is done processing.
* @len number of bytes in current buffer.
* @is_rx when true, current buffer is pointing to a i2c read operation.
* @slv_addr 8 bit address. This is the i2c_msg->addr + rd/wr bit.
*
* Keep track of current position in the client's transfer request and
* pre-process a transfer's buffer and tags.
*/
struct i2c_msm_xfer_buf {
bool is_init;
int msg_idx;
int byte_idx;
int end_idx;
int len;
bool is_rx;
bool is_last;
u16 slv_addr;
struct i2c_msm_tag in_tag;
struct i2c_msm_tag out_tag;
};
#ifdef DEBUG
#define I2C_MSM_PROF_MAX_EVNTS (64)
#else
#define I2C_MSM_PROF_MAX_EVNTS (16)
#endif
/*
* i2c_msm_prof_event: profiling event
*
* @data Additional data about the event. The interpretation of the data is
* dependant on the type field.
* @type event type (see enum i2c_msm_prof_event_type)
*/
struct i2c_msm_prof_event {
struct timespec time;
u64 data0;
u32 data1;
u32 data2;
u8 type;
u8 dump_func_id;
};
enum i2c_msm_err {
I2C_MSM_NO_ERR = 0,
I2C_MSM_ERR_NACK,
I2C_MSM_ERR_ARB_LOST,
I2C_MSM_ERR_BUS_ERR,
I2C_MSM_ERR_TIMEOUT,
I2C_MSM_ERR_CORE_CLK,
I2C_MSM_ERR_OVR_UNDR_RUN,
};
/*
* i2c_msm_xfer: A client transfer request. A list of one or more i2c messages
*
* @msgs NULL when no active xfer. Points to array of i2c_msgs
* given by the client.
* @msg_cnt number of messages in msgs array.
* @complete completion object to wait on for end of transfer.
* @rx_cnt number of input bytes in the client's request.
* @tx_cnt number of output bytes in the client's request.
* @rx_ovrhd_cnt number of input bytes due to tags.
* @tx_ovrhd_cnt number of output bytes due to tags.
* @event profiling data. An array of timestamps of transfer events
* @event_cnt number of items in event array.
* @is_active true during xfer process and false after xfer end
* @mtx mutex to solve multithreaded problem in xfer
*/
struct i2c_msm_xfer {
struct i2c_msg *msgs;
int msg_cnt;
enum i2c_msm_xfer_mode_id mode_id;
struct completion complete;
size_t rx_cnt;
size_t tx_cnt;
size_t rx_ovrhd_cnt;
size_t tx_ovrhd_cnt;
struct i2c_msm_xfer_buf cur_buf;
u32 timeout;
bool last_is_rx;
enum i2c_msm_err err;
struct i2c_msm_prof_event event[I2C_MSM_PROF_MAX_EVNTS];
atomic_t event_cnt;
atomic_t is_active;
struct mutex mtx;
struct i2c_msm_xfer_mode_fifo fifo;
struct i2c_msm_xfer_mode_blk blk;
struct i2c_msm_xfer_mode_dma dma;
};
/*
* i2c_msm_ctrl: the driver's main struct
*
* @is_init true when
* @ver info that is different between i2c controller versions
* @ver_num ha
* @xfer state of the currently processed transfer.
* @dbgfs debug-fs root and values that may be set via debug-fs.
* @rsrcs resources from platform data including clocks, gpios, irqs, and
* memory regions.
* @mstr_clk_ctl cached value for programming to mstr_clk_ctl register
*/
struct i2c_msm_ctrl {
struct device *dev;
struct i2c_adapter adapter;
struct i2c_msm_xfer xfer;
struct i2c_msm_dbgfs dbgfs;
struct i2c_msm_resources rsrcs;
u32 mstr_clk_ctl;
enum i2c_msm_power_state pwr_state;
};
/* Enum for the profiling event types */
enum i2c_msm_prof_evnt_type {
I2C_MSM_VALID_END,
I2C_MSM_PIP_DSCN,
I2C_MSM_PIP_CNCT,
I2C_MSM_ACTV_END,
I2C_MSM_IRQ_BGN,
I2C_MSM_IRQ_END,
I2C_MSM_XFER_BEG,
I2C_MSM_XFER_END,
I2C_MSM_SCAN_SUM,
I2C_MSM_NEXT_BUF,
I2C_MSM_COMPLT_OK,
I2C_MSM_COMPLT_FL,
I2C_MSM_PROF_RESET,
};
#ifdef CONFIG_I2C_MSM_PROF_DBG
void i2c_msm_dbgfs_init(struct i2c_msm_ctrl *ctrl);
void i2c_msm_dbgfs_teardown(struct i2c_msm_ctrl *ctrl);
/* diagonisis the i2c registers and dump the errors accordingly */
const char *i2c_msm_dbg_tag_to_str(const struct i2c_msm_tag *tag,
char *buf, size_t buf_len);
void i2c_msm_prof_evnt_dump(struct i2c_msm_ctrl *ctrl);
/* function definitions to be used from the i2c-msm-v2-debug file */
void i2c_msm_prof_evnt_add(struct i2c_msm_ctrl *ctrl,
enum msm_i2_debug_level dbg_level,
enum i2c_msm_prof_evnt_type event,
u64 data0, u32 data1, u32 data2);
int i2c_msm_dbg_qup_reg_dump(struct i2c_msm_ctrl *ctrl);
const char *
i2c_msm_dbg_dma_tag_to_str(const struct i2c_msm_dma_tag *dma_tag, char *buf,
size_t buf_len);
#else
/* use dummy functions */
static inline void i2c_msm_dbgfs_init(struct i2c_msm_ctrl *ctrl) {}
static inline void i2c_msm_dbgfs_teardown(struct i2c_msm_ctrl *ctrl) {}
static inline const char *i2c_msm_dbg_tag_to_str(const struct i2c_msm_tag *tag,
char *buf, size_t buf_len)
{
return NULL;
}
static inline void i2c_msm_prof_evnt_dump(struct i2c_msm_ctrl *ctrl) {}
/* function definitions to be used from the i2c-msm-v2-debug file */
static inline void i2c_msm_prof_evnt_add(struct i2c_msm_ctrl *ctrl,
enum msm_i2_debug_level dbg_level,
enum i2c_msm_prof_evnt_type event,
u64 data0, u32 data1, u32 data2) {}
static inline int i2c_msm_dbg_qup_reg_dump(struct i2c_msm_ctrl *ctrl)
{
return true;
}
static inline const char *i2c_msm_dbg_dma_tag_to_str(const struct
i2c_msm_dma_tag * dma_tag, char *buf, size_t buf_len)
{
return NULL;
}
#endif /* I2C_MSM_V2_PROF_DBG */
#endif /* _I2C_MSM_V2_H */