1378 lines
36 KiB
C
1378 lines
36 KiB
C
/*
|
|
* DMA driver for Xilinx Video DMA Engine
|
|
*
|
|
* Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
|
|
*
|
|
* Based on the Freescale DMA driver.
|
|
*
|
|
* Description:
|
|
* The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
|
|
* core that provides high-bandwidth direct memory access between memory
|
|
* and AXI4-Stream type video target peripherals. The core provides efficient
|
|
* two dimensional DMA operations with independent asynchronous read (S2MM)
|
|
* and write (MM2S) channel operation. It can be configured to have either
|
|
* one channel or two channels. If configured as two channels, one is to
|
|
* transmit to the video device (MM2S) and another is to receive from the
|
|
* video device (S2MM). Initialization, status, interrupt and management
|
|
* registers are accessed through an AXI4-Lite slave interface.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/amba/xilinx_dma.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../dmaengine.h"
|
|
|
|
/* Register/Descriptor Offsets */
|
|
#define XILINX_VDMA_MM2S_CTRL_OFFSET 0x0000
|
|
#define XILINX_VDMA_S2MM_CTRL_OFFSET 0x0030
|
|
#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050
|
|
#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0
|
|
|
|
/* Control Registers */
|
|
#define XILINX_VDMA_REG_DMACR 0x0000
|
|
#define XILINX_VDMA_DMACR_DELAY_MAX 0xff
|
|
#define XILINX_VDMA_DMACR_DELAY_SHIFT 24
|
|
#define XILINX_VDMA_DMACR_FRAME_COUNT_MAX 0xff
|
|
#define XILINX_VDMA_DMACR_FRAME_COUNT_SHIFT 16
|
|
#define XILINX_VDMA_DMACR_ERR_IRQ BIT(14)
|
|
#define XILINX_VDMA_DMACR_DLY_CNT_IRQ BIT(13)
|
|
#define XILINX_VDMA_DMACR_FRM_CNT_IRQ BIT(12)
|
|
#define XILINX_VDMA_DMACR_MASTER_SHIFT 8
|
|
#define XILINX_VDMA_DMACR_FSYNCSRC_SHIFT 5
|
|
#define XILINX_VDMA_DMACR_FRAMECNT_EN BIT(4)
|
|
#define XILINX_VDMA_DMACR_GENLOCK_EN BIT(3)
|
|
#define XILINX_VDMA_DMACR_RESET BIT(2)
|
|
#define XILINX_VDMA_DMACR_CIRC_EN BIT(1)
|
|
#define XILINX_VDMA_DMACR_RUNSTOP BIT(0)
|
|
#define XILINX_VDMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
|
|
|
|
#define XILINX_VDMA_REG_DMASR 0x0004
|
|
#define XILINX_VDMA_DMASR_EOL_LATE_ERR BIT(15)
|
|
#define XILINX_VDMA_DMASR_ERR_IRQ BIT(14)
|
|
#define XILINX_VDMA_DMASR_DLY_CNT_IRQ BIT(13)
|
|
#define XILINX_VDMA_DMASR_FRM_CNT_IRQ BIT(12)
|
|
#define XILINX_VDMA_DMASR_SOF_LATE_ERR BIT(11)
|
|
#define XILINX_VDMA_DMASR_SG_DEC_ERR BIT(10)
|
|
#define XILINX_VDMA_DMASR_SG_SLV_ERR BIT(9)
|
|
#define XILINX_VDMA_DMASR_EOF_EARLY_ERR BIT(8)
|
|
#define XILINX_VDMA_DMASR_SOF_EARLY_ERR BIT(7)
|
|
#define XILINX_VDMA_DMASR_DMA_DEC_ERR BIT(6)
|
|
#define XILINX_VDMA_DMASR_DMA_SLAVE_ERR BIT(5)
|
|
#define XILINX_VDMA_DMASR_DMA_INT_ERR BIT(4)
|
|
#define XILINX_VDMA_DMASR_IDLE BIT(1)
|
|
#define XILINX_VDMA_DMASR_HALTED BIT(0)
|
|
#define XILINX_VDMA_DMASR_DELAY_MASK GENMASK(31, 24)
|
|
#define XILINX_VDMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16)
|
|
|
|
#define XILINX_VDMA_REG_CURDESC 0x0008
|
|
#define XILINX_VDMA_REG_TAILDESC 0x0010
|
|
#define XILINX_VDMA_REG_REG_INDEX 0x0014
|
|
#define XILINX_VDMA_REG_FRMSTORE 0x0018
|
|
#define XILINX_VDMA_REG_THRESHOLD 0x001c
|
|
#define XILINX_VDMA_REG_FRMPTR_STS 0x0024
|
|
#define XILINX_VDMA_REG_PARK_PTR 0x0028
|
|
#define XILINX_VDMA_PARK_PTR_WR_REF_SHIFT 8
|
|
#define XILINX_VDMA_PARK_PTR_RD_REF_SHIFT 0
|
|
#define XILINX_VDMA_REG_VDMA_VERSION 0x002c
|
|
|
|
/* Register Direct Mode Registers */
|
|
#define XILINX_VDMA_REG_VSIZE 0x0000
|
|
#define XILINX_VDMA_REG_HSIZE 0x0004
|
|
|
|
#define XILINX_VDMA_REG_FRMDLY_STRIDE 0x0008
|
|
#define XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24
|
|
#define XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT 0
|
|
|
|
#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n))
|
|
|
|
/* HW specific definitions */
|
|
#define XILINX_VDMA_MAX_CHANS_PER_DEVICE 0x2
|
|
|
|
#define XILINX_VDMA_DMAXR_ALL_IRQ_MASK \
|
|
(XILINX_VDMA_DMASR_FRM_CNT_IRQ | \
|
|
XILINX_VDMA_DMASR_DLY_CNT_IRQ | \
|
|
XILINX_VDMA_DMASR_ERR_IRQ)
|
|
|
|
#define XILINX_VDMA_DMASR_ALL_ERR_MASK \
|
|
(XILINX_VDMA_DMASR_EOL_LATE_ERR | \
|
|
XILINX_VDMA_DMASR_SOF_LATE_ERR | \
|
|
XILINX_VDMA_DMASR_SG_DEC_ERR | \
|
|
XILINX_VDMA_DMASR_SG_SLV_ERR | \
|
|
XILINX_VDMA_DMASR_EOF_EARLY_ERR | \
|
|
XILINX_VDMA_DMASR_SOF_EARLY_ERR | \
|
|
XILINX_VDMA_DMASR_DMA_DEC_ERR | \
|
|
XILINX_VDMA_DMASR_DMA_SLAVE_ERR | \
|
|
XILINX_VDMA_DMASR_DMA_INT_ERR)
|
|
|
|
/*
|
|
* Recoverable errors are DMA Internal error, SOF Early, EOF Early
|
|
* and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
|
|
* is enabled in the h/w system.
|
|
*/
|
|
#define XILINX_VDMA_DMASR_ERR_RECOVER_MASK \
|
|
(XILINX_VDMA_DMASR_SOF_LATE_ERR | \
|
|
XILINX_VDMA_DMASR_EOF_EARLY_ERR | \
|
|
XILINX_VDMA_DMASR_SOF_EARLY_ERR | \
|
|
XILINX_VDMA_DMASR_DMA_INT_ERR)
|
|
|
|
/* Axi VDMA Flush on Fsync bits */
|
|
#define XILINX_VDMA_FLUSH_S2MM 3
|
|
#define XILINX_VDMA_FLUSH_MM2S 2
|
|
#define XILINX_VDMA_FLUSH_BOTH 1
|
|
|
|
/* Delay loop counter to prevent hardware failure */
|
|
#define XILINX_VDMA_LOOP_COUNT 1000000
|
|
|
|
/**
|
|
* struct xilinx_vdma_desc_hw - Hardware Descriptor
|
|
* @next_desc: Next Descriptor Pointer @0x00
|
|
* @pad1: Reserved @0x04
|
|
* @buf_addr: Buffer address @0x08
|
|
* @pad2: Reserved @0x0C
|
|
* @vsize: Vertical Size @0x10
|
|
* @hsize: Horizontal Size @0x14
|
|
* @stride: Number of bytes between the first
|
|
* pixels of each horizontal line @0x18
|
|
*/
|
|
struct xilinx_vdma_desc_hw {
|
|
u32 next_desc;
|
|
u32 pad1;
|
|
u32 buf_addr;
|
|
u32 pad2;
|
|
u32 vsize;
|
|
u32 hsize;
|
|
u32 stride;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_vdma_tx_segment - Descriptor segment
|
|
* @hw: Hardware descriptor
|
|
* @node: Node in the descriptor segments list
|
|
* @phys: Physical address of segment
|
|
*/
|
|
struct xilinx_vdma_tx_segment {
|
|
struct xilinx_vdma_desc_hw hw;
|
|
struct list_head node;
|
|
dma_addr_t phys;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_vdma_tx_descriptor - Per Transaction structure
|
|
* @async_tx: Async transaction descriptor
|
|
* @segments: TX segments list
|
|
* @node: Node in the channel descriptors list
|
|
*/
|
|
struct xilinx_vdma_tx_descriptor {
|
|
struct dma_async_tx_descriptor async_tx;
|
|
struct list_head segments;
|
|
struct list_head node;
|
|
};
|
|
|
|
/**
|
|
* struct xilinx_vdma_chan - Driver specific VDMA channel structure
|
|
* @xdev: Driver specific device structure
|
|
* @ctrl_offset: Control registers offset
|
|
* @desc_offset: TX descriptor registers offset
|
|
* @lock: Descriptor operation lock
|
|
* @pending_list: Descriptors waiting
|
|
* @active_desc: Active descriptor
|
|
* @allocated_desc: Allocated descriptor
|
|
* @done_list: Complete descriptors
|
|
* @common: DMA common channel
|
|
* @desc_pool: Descriptors pool
|
|
* @dev: The dma device
|
|
* @irq: Channel IRQ
|
|
* @id: Channel ID
|
|
* @direction: Transfer direction
|
|
* @num_frms: Number of frames
|
|
* @has_sg: Support scatter transfers
|
|
* @genlock: Support genlock mode
|
|
* @err: Channel has errors
|
|
* @tasklet: Cleanup work after irq
|
|
* @config: Device configuration info
|
|
* @flush_on_fsync: Flush on Frame sync
|
|
*/
|
|
struct xilinx_vdma_chan {
|
|
struct xilinx_vdma_device *xdev;
|
|
u32 ctrl_offset;
|
|
u32 desc_offset;
|
|
spinlock_t lock;
|
|
struct list_head pending_list;
|
|
struct xilinx_vdma_tx_descriptor *active_desc;
|
|
struct xilinx_vdma_tx_descriptor *allocated_desc;
|
|
struct list_head done_list;
|
|
struct dma_chan common;
|
|
struct dma_pool *desc_pool;
|
|
struct device *dev;
|
|
int irq;
|
|
int id;
|
|
enum dma_transfer_direction direction;
|
|
int num_frms;
|
|
bool has_sg;
|
|
bool genlock;
|
|
bool err;
|
|
struct tasklet_struct tasklet;
|
|
struct xilinx_vdma_config config;
|
|
bool flush_on_fsync;
|
|
};
|
|
|
|
/**
|
|
* struct xilinx_vdma_device - VDMA device structure
|
|
* @regs: I/O mapped base address
|
|
* @dev: Device Structure
|
|
* @common: DMA device structure
|
|
* @chan: Driver specific VDMA channel
|
|
* @has_sg: Specifies whether Scatter-Gather is present or not
|
|
* @flush_on_fsync: Flush on frame sync
|
|
*/
|
|
struct xilinx_vdma_device {
|
|
void __iomem *regs;
|
|
struct device *dev;
|
|
struct dma_device common;
|
|
struct xilinx_vdma_chan *chan[XILINX_VDMA_MAX_CHANS_PER_DEVICE];
|
|
bool has_sg;
|
|
u32 flush_on_fsync;
|
|
};
|
|
|
|
/* Macros */
|
|
#define to_xilinx_chan(chan) \
|
|
container_of(chan, struct xilinx_vdma_chan, common)
|
|
#define to_vdma_tx_descriptor(tx) \
|
|
container_of(tx, struct xilinx_vdma_tx_descriptor, async_tx)
|
|
|
|
/* IO accessors */
|
|
static inline u32 vdma_read(struct xilinx_vdma_chan *chan, u32 reg)
|
|
{
|
|
return ioread32(chan->xdev->regs + reg);
|
|
}
|
|
|
|
static inline void vdma_write(struct xilinx_vdma_chan *chan, u32 reg, u32 value)
|
|
{
|
|
iowrite32(value, chan->xdev->regs + reg);
|
|
}
|
|
|
|
static inline void vdma_desc_write(struct xilinx_vdma_chan *chan, u32 reg,
|
|
u32 value)
|
|
{
|
|
vdma_write(chan, chan->desc_offset + reg, value);
|
|
}
|
|
|
|
static inline u32 vdma_ctrl_read(struct xilinx_vdma_chan *chan, u32 reg)
|
|
{
|
|
return vdma_read(chan, chan->ctrl_offset + reg);
|
|
}
|
|
|
|
static inline void vdma_ctrl_write(struct xilinx_vdma_chan *chan, u32 reg,
|
|
u32 value)
|
|
{
|
|
vdma_write(chan, chan->ctrl_offset + reg, value);
|
|
}
|
|
|
|
static inline void vdma_ctrl_clr(struct xilinx_vdma_chan *chan, u32 reg,
|
|
u32 clr)
|
|
{
|
|
vdma_ctrl_write(chan, reg, vdma_ctrl_read(chan, reg) & ~clr);
|
|
}
|
|
|
|
static inline void vdma_ctrl_set(struct xilinx_vdma_chan *chan, u32 reg,
|
|
u32 set)
|
|
{
|
|
vdma_ctrl_write(chan, reg, vdma_ctrl_read(chan, reg) | set);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Descriptors and segments alloc and free
|
|
*/
|
|
|
|
/**
|
|
* xilinx_vdma_alloc_tx_segment - Allocate transaction segment
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: The allocated segment on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_vdma_tx_segment *
|
|
xilinx_vdma_alloc_tx_segment(struct xilinx_vdma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_tx_segment *segment;
|
|
dma_addr_t phys;
|
|
|
|
segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys);
|
|
if (!segment)
|
|
return NULL;
|
|
|
|
memset(segment, 0, sizeof(*segment));
|
|
segment->phys = phys;
|
|
|
|
return segment;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_free_tx_segment - Free transaction segment
|
|
* @chan: Driver specific VDMA channel
|
|
* @segment: VDMA transaction segment
|
|
*/
|
|
static void xilinx_vdma_free_tx_segment(struct xilinx_vdma_chan *chan,
|
|
struct xilinx_vdma_tx_segment *segment)
|
|
{
|
|
dma_pool_free(chan->desc_pool, segment, segment->phys);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_tx_descriptor - Allocate transaction descriptor
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: The allocated descriptor on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_vdma_tx_descriptor *
|
|
xilinx_vdma_alloc_tx_descriptor(struct xilinx_vdma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_tx_descriptor *desc;
|
|
unsigned long flags;
|
|
|
|
if (chan->allocated_desc)
|
|
return chan->allocated_desc;
|
|
|
|
desc = kzalloc(sizeof(*desc), GFP_KERNEL);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
chan->allocated_desc = desc;
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
INIT_LIST_HEAD(&desc->segments);
|
|
|
|
return desc;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_free_tx_descriptor - Free transaction descriptor
|
|
* @chan: Driver specific VDMA channel
|
|
* @desc: VDMA transaction descriptor
|
|
*/
|
|
static void
|
|
xilinx_vdma_free_tx_descriptor(struct xilinx_vdma_chan *chan,
|
|
struct xilinx_vdma_tx_descriptor *desc)
|
|
{
|
|
struct xilinx_vdma_tx_segment *segment, *next;
|
|
|
|
if (!desc)
|
|
return;
|
|
|
|
list_for_each_entry_safe(segment, next, &desc->segments, node) {
|
|
list_del(&segment->node);
|
|
xilinx_vdma_free_tx_segment(chan, segment);
|
|
}
|
|
|
|
kfree(desc);
|
|
}
|
|
|
|
/* Required functions */
|
|
|
|
/**
|
|
* xilinx_vdma_free_desc_list - Free descriptors list
|
|
* @chan: Driver specific VDMA channel
|
|
* @list: List to parse and delete the descriptor
|
|
*/
|
|
static void xilinx_vdma_free_desc_list(struct xilinx_vdma_chan *chan,
|
|
struct list_head *list)
|
|
{
|
|
struct xilinx_vdma_tx_descriptor *desc, *next;
|
|
|
|
list_for_each_entry_safe(desc, next, list, node) {
|
|
list_del(&desc->node);
|
|
xilinx_vdma_free_tx_descriptor(chan, desc);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_free_descriptors - Free channel descriptors
|
|
* @chan: Driver specific VDMA channel
|
|
*/
|
|
static void xilinx_vdma_free_descriptors(struct xilinx_vdma_chan *chan)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
xilinx_vdma_free_desc_list(chan, &chan->pending_list);
|
|
xilinx_vdma_free_desc_list(chan, &chan->done_list);
|
|
|
|
xilinx_vdma_free_tx_descriptor(chan, chan->active_desc);
|
|
chan->active_desc = NULL;
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_free_chan_resources - Free channel resources
|
|
* @dchan: DMA channel
|
|
*/
|
|
static void xilinx_vdma_free_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
dev_dbg(chan->dev, "Free all channel resources.\n");
|
|
|
|
xilinx_vdma_free_descriptors(chan);
|
|
dma_pool_destroy(chan->desc_pool);
|
|
chan->desc_pool = NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_chan_desc_cleanup - Clean channel descriptors
|
|
* @chan: Driver specific VDMA channel
|
|
*/
|
|
static void xilinx_vdma_chan_desc_cleanup(struct xilinx_vdma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_tx_descriptor *desc, *next;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
list_for_each_entry_safe(desc, next, &chan->done_list, node) {
|
|
dma_async_tx_callback callback;
|
|
void *callback_param;
|
|
|
|
/* Remove from the list of running transactions */
|
|
list_del(&desc->node);
|
|
|
|
/* Run the link descriptor callback function */
|
|
callback = desc->async_tx.callback;
|
|
callback_param = desc->async_tx.callback_param;
|
|
if (callback) {
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
callback(callback_param);
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
}
|
|
|
|
/* Run any dependencies, then free the descriptor */
|
|
dma_run_dependencies(&desc->async_tx);
|
|
xilinx_vdma_free_tx_descriptor(chan, desc);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_do_tasklet - Schedule completion tasklet
|
|
* @data: Pointer to the Xilinx VDMA channel structure
|
|
*/
|
|
static void xilinx_vdma_do_tasklet(unsigned long data)
|
|
{
|
|
struct xilinx_vdma_chan *chan = (struct xilinx_vdma_chan *)data;
|
|
|
|
xilinx_vdma_chan_desc_cleanup(chan);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_alloc_chan_resources - Allocate channel resources
|
|
* @dchan: DMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_alloc_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
/* Has this channel already been allocated? */
|
|
if (chan->desc_pool)
|
|
return 0;
|
|
|
|
/*
|
|
* We need the descriptor to be aligned to 64bytes
|
|
* for meeting Xilinx VDMA specification requirement.
|
|
*/
|
|
chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
|
|
chan->dev,
|
|
sizeof(struct xilinx_vdma_tx_segment),
|
|
__alignof__(struct xilinx_vdma_tx_segment), 0);
|
|
if (!chan->desc_pool) {
|
|
dev_err(chan->dev,
|
|
"unable to allocate channel %d descriptor pool\n",
|
|
chan->id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dma_cookie_init(dchan);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_tx_status - Get VDMA transaction status
|
|
* @dchan: DMA channel
|
|
* @cookie: Transaction identifier
|
|
* @txstate: Transaction state
|
|
*
|
|
* Return: DMA transaction status
|
|
*/
|
|
static enum dma_status xilinx_vdma_tx_status(struct dma_chan *dchan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
return dma_cookie_status(dchan, cookie, txstate);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_is_running - Check if VDMA channel is running
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: '1' if running, '0' if not.
|
|
*/
|
|
static bool xilinx_vdma_is_running(struct xilinx_vdma_chan *chan)
|
|
{
|
|
return !(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
|
|
XILINX_VDMA_DMASR_HALTED) &&
|
|
(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
|
|
XILINX_VDMA_DMACR_RUNSTOP);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_is_idle - Check if VDMA channel is idle
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: '1' if idle, '0' if not.
|
|
*/
|
|
static bool xilinx_vdma_is_idle(struct xilinx_vdma_chan *chan)
|
|
{
|
|
return vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
|
|
XILINX_VDMA_DMASR_IDLE;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_halt - Halt VDMA channel
|
|
* @chan: Driver specific VDMA channel
|
|
*/
|
|
static void xilinx_vdma_halt(struct xilinx_vdma_chan *chan)
|
|
{
|
|
int loop = XILINX_VDMA_LOOP_COUNT;
|
|
|
|
vdma_ctrl_clr(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP);
|
|
|
|
/* Wait for the hardware to halt */
|
|
do {
|
|
if (vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
|
|
XILINX_VDMA_DMASR_HALTED)
|
|
break;
|
|
} while (loop--);
|
|
|
|
if (!loop) {
|
|
dev_err(chan->dev, "Cannot stop channel %p: %x\n",
|
|
chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR));
|
|
chan->err = true;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_start - Start VDMA channel
|
|
* @chan: Driver specific VDMA channel
|
|
*/
|
|
static void xilinx_vdma_start(struct xilinx_vdma_chan *chan)
|
|
{
|
|
int loop = XILINX_VDMA_LOOP_COUNT;
|
|
|
|
vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP);
|
|
|
|
/* Wait for the hardware to start */
|
|
do {
|
|
if (!(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
|
|
XILINX_VDMA_DMASR_HALTED))
|
|
break;
|
|
} while (loop--);
|
|
|
|
if (!loop) {
|
|
dev_err(chan->dev, "Cannot start channel %p: %x\n",
|
|
chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR));
|
|
|
|
chan->err = true;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_start_transfer - Starts VDMA transfer
|
|
* @chan: Driver specific channel struct pointer
|
|
*/
|
|
static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_config *config = &chan->config;
|
|
struct xilinx_vdma_tx_descriptor *desc;
|
|
unsigned long flags;
|
|
u32 reg;
|
|
struct xilinx_vdma_tx_segment *head, *tail = NULL;
|
|
|
|
if (chan->err)
|
|
return;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
/* There's already an active descriptor, bail out. */
|
|
if (chan->active_desc)
|
|
goto out_unlock;
|
|
|
|
if (list_empty(&chan->pending_list))
|
|
goto out_unlock;
|
|
|
|
desc = list_first_entry(&chan->pending_list,
|
|
struct xilinx_vdma_tx_descriptor, node);
|
|
|
|
/* If it is SG mode and hardware is busy, cannot submit */
|
|
if (chan->has_sg && xilinx_vdma_is_running(chan) &&
|
|
!xilinx_vdma_is_idle(chan)) {
|
|
dev_dbg(chan->dev, "DMA controller still busy\n");
|
|
goto out_unlock;
|
|
}
|
|
|
|
/*
|
|
* If hardware is idle, then all descriptors on the running lists are
|
|
* done, start new transfers
|
|
*/
|
|
if (chan->has_sg) {
|
|
head = list_first_entry(&desc->segments,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
tail = list_entry(desc->segments.prev,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_CURDESC, head->phys);
|
|
}
|
|
|
|
/* Configure the hardware using info in the config structure */
|
|
reg = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR);
|
|
|
|
if (config->frm_cnt_en)
|
|
reg |= XILINX_VDMA_DMACR_FRAMECNT_EN;
|
|
else
|
|
reg &= ~XILINX_VDMA_DMACR_FRAMECNT_EN;
|
|
|
|
/*
|
|
* With SG, start with circular mode, so that BDs can be fetched.
|
|
* In direct register mode, if not parking, enable circular mode
|
|
*/
|
|
if (chan->has_sg || !config->park)
|
|
reg |= XILINX_VDMA_DMACR_CIRC_EN;
|
|
|
|
if (config->park)
|
|
reg &= ~XILINX_VDMA_DMACR_CIRC_EN;
|
|
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_DMACR, reg);
|
|
|
|
if (config->park && (config->park_frm >= 0) &&
|
|
(config->park_frm < chan->num_frms)) {
|
|
if (chan->direction == DMA_MEM_TO_DEV)
|
|
vdma_write(chan, XILINX_VDMA_REG_PARK_PTR,
|
|
config->park_frm <<
|
|
XILINX_VDMA_PARK_PTR_RD_REF_SHIFT);
|
|
else
|
|
vdma_write(chan, XILINX_VDMA_REG_PARK_PTR,
|
|
config->park_frm <<
|
|
XILINX_VDMA_PARK_PTR_WR_REF_SHIFT);
|
|
}
|
|
|
|
/* Start the hardware */
|
|
xilinx_vdma_start(chan);
|
|
|
|
if (chan->err)
|
|
goto out_unlock;
|
|
|
|
/* Start the transfer */
|
|
if (chan->has_sg) {
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_TAILDESC, tail->phys);
|
|
} else {
|
|
struct xilinx_vdma_tx_segment *segment, *last = NULL;
|
|
int i = 0;
|
|
|
|
list_for_each_entry(segment, &desc->segments, node) {
|
|
vdma_desc_write(chan,
|
|
XILINX_VDMA_REG_START_ADDRESS(i++),
|
|
segment->hw.buf_addr);
|
|
last = segment;
|
|
}
|
|
|
|
if (!last)
|
|
goto out_unlock;
|
|
|
|
/* HW expects these parameters to be same for one transaction */
|
|
vdma_desc_write(chan, XILINX_VDMA_REG_HSIZE, last->hw.hsize);
|
|
vdma_desc_write(chan, XILINX_VDMA_REG_FRMDLY_STRIDE,
|
|
last->hw.stride);
|
|
vdma_desc_write(chan, XILINX_VDMA_REG_VSIZE, last->hw.vsize);
|
|
}
|
|
|
|
list_del(&desc->node);
|
|
chan->active_desc = desc;
|
|
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_issue_pending - Issue pending transactions
|
|
* @dchan: DMA channel
|
|
*/
|
|
static void xilinx_vdma_issue_pending(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
xilinx_vdma_start_transfer(chan);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_complete_descriptor - Mark the active descriptor as complete
|
|
* @chan : xilinx DMA channel
|
|
*
|
|
* CONTEXT: hardirq
|
|
*/
|
|
static void xilinx_vdma_complete_descriptor(struct xilinx_vdma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_tx_descriptor *desc;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
desc = chan->active_desc;
|
|
if (!desc) {
|
|
dev_dbg(chan->dev, "no running descriptors\n");
|
|
goto out_unlock;
|
|
}
|
|
|
|
dma_cookie_complete(&desc->async_tx);
|
|
list_add_tail(&desc->node, &chan->done_list);
|
|
|
|
chan->active_desc = NULL;
|
|
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_reset - Reset VDMA channel
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_reset(struct xilinx_vdma_chan *chan)
|
|
{
|
|
int loop = XILINX_VDMA_LOOP_COUNT;
|
|
u32 tmp;
|
|
|
|
vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RESET);
|
|
|
|
tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
|
|
XILINX_VDMA_DMACR_RESET;
|
|
|
|
/* Wait for the hardware to finish reset */
|
|
do {
|
|
tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
|
|
XILINX_VDMA_DMACR_RESET;
|
|
} while (loop-- && tmp);
|
|
|
|
if (!loop) {
|
|
dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
|
|
vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR),
|
|
vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
chan->err = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_chan_reset - Reset VDMA channel and enable interrupts
|
|
* @chan: Driver specific VDMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_chan_reset(struct xilinx_vdma_chan *chan)
|
|
{
|
|
int err;
|
|
|
|
/* Reset VDMA */
|
|
err = xilinx_vdma_reset(chan);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Enable interrupts */
|
|
vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR,
|
|
XILINX_VDMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_irq_handler - VDMA Interrupt handler
|
|
* @irq: IRQ number
|
|
* @data: Pointer to the Xilinx VDMA channel structure
|
|
*
|
|
* Return: IRQ_HANDLED/IRQ_NONE
|
|
*/
|
|
static irqreturn_t xilinx_vdma_irq_handler(int irq, void *data)
|
|
{
|
|
struct xilinx_vdma_chan *chan = data;
|
|
u32 status;
|
|
|
|
/* Read the status and ack the interrupts. */
|
|
status = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR);
|
|
if (!(status & XILINX_VDMA_DMAXR_ALL_IRQ_MASK))
|
|
return IRQ_NONE;
|
|
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_DMASR,
|
|
status & XILINX_VDMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
if (status & XILINX_VDMA_DMASR_ERR_IRQ) {
|
|
/*
|
|
* An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
|
|
* error is recoverable, ignore it. Otherwise flag the error.
|
|
*
|
|
* Only recoverable errors can be cleared in the DMASR register,
|
|
* make sure not to write to other error bits to 1.
|
|
*/
|
|
u32 errors = status & XILINX_VDMA_DMASR_ALL_ERR_MASK;
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_DMASR,
|
|
errors & XILINX_VDMA_DMASR_ERR_RECOVER_MASK);
|
|
|
|
if (!chan->flush_on_fsync ||
|
|
(errors & ~XILINX_VDMA_DMASR_ERR_RECOVER_MASK)) {
|
|
dev_err(chan->dev,
|
|
"Channel %p has errors %x, cdr %x tdr %x\n",
|
|
chan, errors,
|
|
vdma_ctrl_read(chan, XILINX_VDMA_REG_CURDESC),
|
|
vdma_ctrl_read(chan, XILINX_VDMA_REG_TAILDESC));
|
|
chan->err = true;
|
|
}
|
|
}
|
|
|
|
if (status & XILINX_VDMA_DMASR_DLY_CNT_IRQ) {
|
|
/*
|
|
* Device takes too long to do the transfer when user requires
|
|
* responsiveness.
|
|
*/
|
|
dev_dbg(chan->dev, "Inter-packet latency too long\n");
|
|
}
|
|
|
|
if (status & XILINX_VDMA_DMASR_FRM_CNT_IRQ) {
|
|
xilinx_vdma_complete_descriptor(chan);
|
|
xilinx_vdma_start_transfer(chan);
|
|
}
|
|
|
|
tasklet_schedule(&chan->tasklet);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_tx_submit - Submit DMA transaction
|
|
* @tx: Async transaction descriptor
|
|
*
|
|
* Return: cookie value on success and failure value on error
|
|
*/
|
|
static dma_cookie_t xilinx_vdma_tx_submit(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
struct xilinx_vdma_tx_descriptor *desc = to_vdma_tx_descriptor(tx);
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(tx->chan);
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
if (chan->err) {
|
|
/*
|
|
* If reset fails, need to hard reset the system.
|
|
* Channel is no longer functional
|
|
*/
|
|
err = xilinx_vdma_chan_reset(chan);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
cookie = dma_cookie_assign(tx);
|
|
|
|
/* Append the transaction to the pending transactions queue. */
|
|
list_add_tail(&desc->node, &chan->pending_list);
|
|
|
|
/* Free the allocated desc */
|
|
chan->allocated_desc = NULL;
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
return cookie;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
|
|
* DMA_SLAVE transaction
|
|
* @dchan: DMA channel
|
|
* @xt: Interleaved template pointer
|
|
* @flags: transfer ack flags
|
|
*
|
|
* Return: Async transaction descriptor on success and NULL on failure
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
|
|
struct dma_interleaved_template *xt,
|
|
unsigned long flags)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_vdma_tx_descriptor *desc;
|
|
struct xilinx_vdma_tx_segment *segment, *prev = NULL;
|
|
struct xilinx_vdma_desc_hw *hw;
|
|
|
|
if (!is_slave_direction(xt->dir))
|
|
return NULL;
|
|
|
|
if (!xt->numf || !xt->sgl[0].size)
|
|
return NULL;
|
|
|
|
/* Allocate a transaction descriptor. */
|
|
desc = xilinx_vdma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_vdma_tx_submit;
|
|
async_tx_ack(&desc->async_tx);
|
|
|
|
/* Allocate the link descriptor from DMA pool */
|
|
segment = xilinx_vdma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
/* Fill in the hardware descriptor */
|
|
hw = &segment->hw;
|
|
hw->vsize = xt->numf;
|
|
hw->hsize = xt->sgl[0].size;
|
|
hw->stride = xt->sgl[0].icg <<
|
|
XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT;
|
|
hw->stride |= chan->config.frm_dly <<
|
|
XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
|
|
|
|
if (xt->dir != DMA_MEM_TO_DEV)
|
|
hw->buf_addr = xt->dst_start;
|
|
else
|
|
hw->buf_addr = xt->src_start;
|
|
|
|
/* Link the previous next descriptor to current */
|
|
prev = list_last_entry(&desc->segments,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
prev->hw.next_desc = segment->phys;
|
|
|
|
/* Insert the segment into the descriptor segments list. */
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
|
|
prev = segment;
|
|
|
|
/* Link the last hardware descriptor with the first. */
|
|
segment = list_first_entry(&desc->segments,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
prev->hw.next_desc = segment->phys;
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_vdma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_terminate_all - Halt the channel and free descriptors
|
|
* @chan: Driver specific VDMA Channel pointer
|
|
*/
|
|
static void xilinx_vdma_terminate_all(struct xilinx_vdma_chan *chan)
|
|
{
|
|
/* Halt the DMA engine */
|
|
xilinx_vdma_halt(chan);
|
|
|
|
/* Remove and free all of the descriptors in the lists */
|
|
xilinx_vdma_free_descriptors(chan);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_channel_set_config - Configure VDMA channel
|
|
* Run-time configuration for Axi VDMA, supports:
|
|
* . halt the channel
|
|
* . configure interrupt coalescing and inter-packet delay threshold
|
|
* . start/stop parking
|
|
* . enable genlock
|
|
*
|
|
* @dchan: DMA channel
|
|
* @cfg: VDMA device configuration pointer
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
|
|
struct xilinx_vdma_config *cfg)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
u32 dmacr;
|
|
|
|
if (cfg->reset)
|
|
return xilinx_vdma_chan_reset(chan);
|
|
|
|
dmacr = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR);
|
|
|
|
chan->config.frm_dly = cfg->frm_dly;
|
|
chan->config.park = cfg->park;
|
|
|
|
/* genlock settings */
|
|
chan->config.gen_lock = cfg->gen_lock;
|
|
chan->config.master = cfg->master;
|
|
|
|
if (cfg->gen_lock && chan->genlock) {
|
|
dmacr |= XILINX_VDMA_DMACR_GENLOCK_EN;
|
|
dmacr |= cfg->master << XILINX_VDMA_DMACR_MASTER_SHIFT;
|
|
}
|
|
|
|
chan->config.frm_cnt_en = cfg->frm_cnt_en;
|
|
if (cfg->park)
|
|
chan->config.park_frm = cfg->park_frm;
|
|
else
|
|
chan->config.park_frm = -1;
|
|
|
|
chan->config.coalesc = cfg->coalesc;
|
|
chan->config.delay = cfg->delay;
|
|
|
|
if (cfg->coalesc <= XILINX_VDMA_DMACR_FRAME_COUNT_MAX) {
|
|
dmacr |= cfg->coalesc << XILINX_VDMA_DMACR_FRAME_COUNT_SHIFT;
|
|
chan->config.coalesc = cfg->coalesc;
|
|
}
|
|
|
|
if (cfg->delay <= XILINX_VDMA_DMACR_DELAY_MAX) {
|
|
dmacr |= cfg->delay << XILINX_VDMA_DMACR_DELAY_SHIFT;
|
|
chan->config.delay = cfg->delay;
|
|
}
|
|
|
|
/* FSync Source selection */
|
|
dmacr &= ~XILINX_VDMA_DMACR_FSYNCSRC_MASK;
|
|
dmacr |= cfg->ext_fsync << XILINX_VDMA_DMACR_FSYNCSRC_SHIFT;
|
|
|
|
vdma_ctrl_write(chan, XILINX_VDMA_REG_DMACR, dmacr);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
|
|
|
|
/**
|
|
* xilinx_vdma_device_control - Configure DMA channel of the device
|
|
* @dchan: DMA Channel pointer
|
|
* @cmd: DMA control command
|
|
* @arg: Channel configuration
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_device_control(struct dma_chan *dchan,
|
|
enum dma_ctrl_cmd cmd, unsigned long arg)
|
|
{
|
|
struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
if (cmd != DMA_TERMINATE_ALL)
|
|
return -ENXIO;
|
|
|
|
xilinx_vdma_terminate_all(chan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Probe and remove
|
|
*/
|
|
|
|
/**
|
|
* xilinx_vdma_chan_remove - Per Channel remove function
|
|
* @chan: Driver specific VDMA channel
|
|
*/
|
|
static void xilinx_vdma_chan_remove(struct xilinx_vdma_chan *chan)
|
|
{
|
|
/* Disable all interrupts */
|
|
vdma_ctrl_clr(chan, XILINX_VDMA_REG_DMACR,
|
|
XILINX_VDMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
if (chan->irq > 0)
|
|
free_irq(chan->irq, chan);
|
|
|
|
tasklet_kill(&chan->tasklet);
|
|
|
|
list_del(&chan->common.device_node);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_chan_probe - Per Channel Probing
|
|
* It get channel features from the device tree entry and
|
|
* initialize special channel handling routines
|
|
*
|
|
* @xdev: Driver specific device structure
|
|
* @node: Device node
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_chan_probe(struct xilinx_vdma_device *xdev,
|
|
struct device_node *node)
|
|
{
|
|
struct xilinx_vdma_chan *chan;
|
|
bool has_dre = false;
|
|
u32 value, width;
|
|
int err;
|
|
|
|
/* Allocate and initialize the channel structure */
|
|
chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
|
|
if (!chan)
|
|
return -ENOMEM;
|
|
|
|
chan->dev = xdev->dev;
|
|
chan->xdev = xdev;
|
|
chan->has_sg = xdev->has_sg;
|
|
|
|
spin_lock_init(&chan->lock);
|
|
INIT_LIST_HEAD(&chan->pending_list);
|
|
INIT_LIST_HEAD(&chan->done_list);
|
|
|
|
/* Retrieve the channel properties from the device tree */
|
|
has_dre = of_property_read_bool(node, "xlnx,include-dre");
|
|
|
|
chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
|
|
|
|
err = of_property_read_u32(node, "xlnx,datawidth", &value);
|
|
if (err) {
|
|
dev_err(xdev->dev, "missing xlnx,datawidth property\n");
|
|
return err;
|
|
}
|
|
width = value >> 3; /* Convert bits to bytes */
|
|
|
|
/* If data width is greater than 8 bytes, DRE is not in hw */
|
|
if (width > 8)
|
|
has_dre = false;
|
|
|
|
if (!has_dre)
|
|
xdev->common.copy_align = fls(width - 1);
|
|
|
|
if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel")) {
|
|
chan->direction = DMA_MEM_TO_DEV;
|
|
chan->id = 0;
|
|
|
|
chan->ctrl_offset = XILINX_VDMA_MM2S_CTRL_OFFSET;
|
|
chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
|
|
|
|
if (xdev->flush_on_fsync == XILINX_VDMA_FLUSH_BOTH ||
|
|
xdev->flush_on_fsync == XILINX_VDMA_FLUSH_MM2S)
|
|
chan->flush_on_fsync = true;
|
|
} else if (of_device_is_compatible(node,
|
|
"xlnx,axi-vdma-s2mm-channel")) {
|
|
chan->direction = DMA_DEV_TO_MEM;
|
|
chan->id = 1;
|
|
|
|
chan->ctrl_offset = XILINX_VDMA_S2MM_CTRL_OFFSET;
|
|
chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
|
|
|
|
if (xdev->flush_on_fsync == XILINX_VDMA_FLUSH_BOTH ||
|
|
xdev->flush_on_fsync == XILINX_VDMA_FLUSH_S2MM)
|
|
chan->flush_on_fsync = true;
|
|
} else {
|
|
dev_err(xdev->dev, "Invalid channel compatible node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Request the interrupt */
|
|
chan->irq = irq_of_parse_and_map(node, 0);
|
|
err = request_irq(chan->irq, xilinx_vdma_irq_handler, IRQF_SHARED,
|
|
"xilinx-vdma-controller", chan);
|
|
if (err) {
|
|
dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
|
|
return err;
|
|
}
|
|
|
|
/* Initialize the tasklet */
|
|
tasklet_init(&chan->tasklet, xilinx_vdma_do_tasklet,
|
|
(unsigned long)chan);
|
|
|
|
/*
|
|
* Initialize the DMA channel and add it to the DMA engine channels
|
|
* list.
|
|
*/
|
|
chan->common.device = &xdev->common;
|
|
|
|
list_add_tail(&chan->common.device_node, &xdev->common.channels);
|
|
xdev->chan[chan->id] = chan;
|
|
|
|
/* Reset the channel */
|
|
err = xilinx_vdma_chan_reset(chan);
|
|
if (err < 0) {
|
|
dev_err(xdev->dev, "Reset channel failed\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* of_dma_xilinx_xlate - Translation function
|
|
* @dma_spec: Pointer to DMA specifier as found in the device tree
|
|
* @ofdma: Pointer to DMA controller data
|
|
*
|
|
* Return: DMA channel pointer on success and NULL on error
|
|
*/
|
|
static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct xilinx_vdma_device *xdev = ofdma->of_dma_data;
|
|
int chan_id = dma_spec->args[0];
|
|
|
|
if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE)
|
|
return NULL;
|
|
|
|
return dma_get_slave_channel(&xdev->chan[chan_id]->common);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_probe - Driver probe function
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_vdma_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct xilinx_vdma_device *xdev;
|
|
struct device_node *child;
|
|
struct resource *io;
|
|
u32 num_frames;
|
|
int i, err;
|
|
|
|
/* Allocate and initialize the DMA engine structure */
|
|
xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
|
|
if (!xdev)
|
|
return -ENOMEM;
|
|
|
|
xdev->dev = &pdev->dev;
|
|
|
|
/* Request and map I/O memory */
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
xdev->regs = devm_ioremap_resource(&pdev->dev, io);
|
|
if (IS_ERR(xdev->regs))
|
|
return PTR_ERR(xdev->regs);
|
|
|
|
/* Retrieve the DMA engine properties from the device tree */
|
|
xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
|
|
|
|
err = of_property_read_u32(node, "xlnx,num-fstores", &num_frames);
|
|
if (err < 0) {
|
|
dev_err(xdev->dev, "missing xlnx,num-fstores property\n");
|
|
return err;
|
|
}
|
|
|
|
err = of_property_read_u32(node, "xlnx,flush-fsync",
|
|
&xdev->flush_on_fsync);
|
|
if (err < 0)
|
|
dev_warn(xdev->dev, "missing xlnx,flush-fsync property\n");
|
|
|
|
/* Initialize the DMA engine */
|
|
xdev->common.dev = &pdev->dev;
|
|
|
|
INIT_LIST_HEAD(&xdev->common.channels);
|
|
dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
|
|
|
|
xdev->common.device_alloc_chan_resources =
|
|
xilinx_vdma_alloc_chan_resources;
|
|
xdev->common.device_free_chan_resources =
|
|
xilinx_vdma_free_chan_resources;
|
|
xdev->common.device_prep_interleaved_dma =
|
|
xilinx_vdma_dma_prep_interleaved;
|
|
xdev->common.device_control = xilinx_vdma_device_control;
|
|
xdev->common.device_tx_status = xilinx_vdma_tx_status;
|
|
xdev->common.device_issue_pending = xilinx_vdma_issue_pending;
|
|
|
|
platform_set_drvdata(pdev, xdev);
|
|
|
|
/* Initialize the channels */
|
|
for_each_child_of_node(node, child) {
|
|
err = xilinx_vdma_chan_probe(xdev, child);
|
|
if (err < 0)
|
|
goto error;
|
|
}
|
|
|
|
for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++)
|
|
if (xdev->chan[i])
|
|
xdev->chan[i]->num_frms = num_frames;
|
|
|
|
/* Register the DMA engine with the core */
|
|
dma_async_device_register(&xdev->common);
|
|
|
|
err = of_dma_controller_register(node, of_dma_xilinx_xlate,
|
|
xdev);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "Unable to register DMA to DT\n");
|
|
dma_async_device_unregister(&xdev->common);
|
|
goto error;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
|
|
|
|
return 0;
|
|
|
|
error:
|
|
for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++)
|
|
if (xdev->chan[i])
|
|
xilinx_vdma_chan_remove(xdev->chan[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_remove - Driver remove function
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: Always '0'
|
|
*/
|
|
static int xilinx_vdma_remove(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_vdma_device *xdev = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
of_dma_controller_free(pdev->dev.of_node);
|
|
|
|
dma_async_device_unregister(&xdev->common);
|
|
|
|
for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++)
|
|
if (xdev->chan[i])
|
|
xilinx_vdma_chan_remove(xdev->chan[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id xilinx_vdma_of_ids[] = {
|
|
{ .compatible = "xlnx,axi-vdma-1.00.a",},
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver xilinx_vdma_driver = {
|
|
.driver = {
|
|
.name = "xilinx-vdma",
|
|
.of_match_table = xilinx_vdma_of_ids,
|
|
},
|
|
.probe = xilinx_vdma_probe,
|
|
.remove = xilinx_vdma_remove,
|
|
};
|
|
|
|
module_platform_driver(xilinx_vdma_driver);
|
|
|
|
MODULE_AUTHOR("Xilinx, Inc.");
|
|
MODULE_DESCRIPTION("Xilinx VDMA driver");
|
|
MODULE_LICENSE("GPL v2");
|