472 lines
11 KiB
C
472 lines
11 KiB
C
/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
|
|
*
|
|
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
|
|
*
|
|
* This module is based off the the gl861 and vp702x modules.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "friio.h"
|
|
|
|
struct jdvbt90502_state {
|
|
struct i2c_adapter *i2c;
|
|
struct dvb_frontend frontend;
|
|
struct jdvbt90502_config config;
|
|
};
|
|
|
|
/* NOTE: TC90502 has 16bit register-address? */
|
|
/* register 0x0100 is used for reading PLL status, so reg is u16 here */
|
|
static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
|
|
const u16 reg, u8 *buf, const size_t count)
|
|
{
|
|
int ret;
|
|
u8 wbuf[3];
|
|
struct i2c_msg msg[2];
|
|
|
|
wbuf[0] = reg & 0xFF;
|
|
wbuf[1] = 0;
|
|
wbuf[2] = reg >> 8;
|
|
|
|
msg[0].addr = state->config.demod_address;
|
|
msg[0].flags = 0;
|
|
msg[0].buf = wbuf;
|
|
msg[0].len = sizeof(wbuf);
|
|
|
|
msg[1].addr = msg[0].addr;
|
|
msg[1].flags = I2C_M_RD;
|
|
msg[1].buf = buf;
|
|
msg[1].len = count;
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
if (ret != 2) {
|
|
deb_fe(" reg read failed.\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* currently 16bit register-address is not used, so reg is u8 here */
|
|
static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
|
|
const u8 reg, const u8 val)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 wbuf[2];
|
|
|
|
wbuf[0] = reg;
|
|
wbuf[1] = val;
|
|
|
|
msg.addr = state->config.demod_address;
|
|
msg.flags = 0;
|
|
msg.buf = wbuf;
|
|
msg.len = sizeof(wbuf);
|
|
|
|
if (i2c_transfer(state->i2c, &msg, 1) != 1) {
|
|
deb_fe(" reg write failed.");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int _jdvbt90502_write(struct dvb_frontend *fe, const u8 buf[], int len)
|
|
{
|
|
struct jdvbt90502_state *state = fe->demodulator_priv;
|
|
int err, i;
|
|
for (i = 0; i < len - 1; i++) {
|
|
err = jdvbt90502_single_reg_write(state,
|
|
buf[0] + i, buf[i + 1]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* read pll status byte via the demodulator's I2C register */
|
|
/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
|
|
static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
|
|
{
|
|
int ret;
|
|
|
|
/* +1 for reading */
|
|
u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
|
|
|
|
*result = 0;
|
|
|
|
ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
|
|
pll_addr_byte);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
|
|
if (ret)
|
|
goto error;
|
|
|
|
deb_fe("PLL read val:%02x\n", *result);
|
|
return 0;
|
|
|
|
error:
|
|
deb_fe("%s:ret == %d\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
|
|
/* set pll frequency via the demodulator's I2C register */
|
|
static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
|
|
{
|
|
int ret;
|
|
int retry;
|
|
u8 res1;
|
|
u8 res2[9];
|
|
|
|
u8 pll_freq_cmd[PLL_CMD_LEN];
|
|
u8 pll_agc_cmd[PLL_CMD_LEN];
|
|
struct i2c_msg msg[2];
|
|
u32 f;
|
|
|
|
deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
|
|
state->frontend.ops.info.frequency_stepsize);
|
|
/* freq -> oscilator frequency conversion. */
|
|
/* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */
|
|
f = freq / state->frontend.ops.info.frequency_stepsize;
|
|
/* add 399[1/7 MHZ] = 57MHz for the IF */
|
|
f += 399;
|
|
/* add center frequency shift if necessary */
|
|
if (f % 7 == 0)
|
|
f++;
|
|
pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
|
|
pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
|
|
pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
|
|
pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
|
|
pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
|
|
pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */
|
|
|
|
msg[0].addr = state->config.demod_address;
|
|
msg[0].flags = 0;
|
|
msg[0].buf = pll_freq_cmd;
|
|
msg[0].len = sizeof(pll_freq_cmd);
|
|
|
|
ret = i2c_transfer(state->i2c, &msg[0], 1);
|
|
if (ret != 1)
|
|
goto error;
|
|
|
|
udelay(50);
|
|
|
|
pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
|
|
pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
|
|
pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
|
|
pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
|
|
pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */
|
|
pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
|
|
/* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
|
|
|
|
msg[1].addr = msg[0].addr;
|
|
msg[1].flags = 0;
|
|
msg[1].buf = pll_agc_cmd;
|
|
msg[1].len = sizeof(pll_agc_cmd);
|
|
|
|
ret = i2c_transfer(state->i2c, &msg[1], 1);
|
|
if (ret != 1)
|
|
goto error;
|
|
|
|
/* I don't know what these cmds are for, */
|
|
/* but the USB log on a windows box contains them */
|
|
ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
|
|
ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
|
|
if (ret)
|
|
goto error;
|
|
udelay(100);
|
|
|
|
/* wait for the demod to be ready? */
|
|
#define RETRY_COUNT 5
|
|
for (retry = 0; retry < RETRY_COUNT; retry++) {
|
|
ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
|
|
if (ret)
|
|
goto error;
|
|
/* if (res1 != 0x00) goto error; */
|
|
ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
|
|
if (ret)
|
|
goto error;
|
|
if (res2[0] >= 0xA7)
|
|
break;
|
|
msleep(100);
|
|
}
|
|
if (retry >= RETRY_COUNT) {
|
|
deb_fe("%s: FE does not get ready after freq setting.\n",
|
|
__func__);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
error:
|
|
deb_fe("%s:ret == %d\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
|
|
{
|
|
u8 result;
|
|
int ret;
|
|
|
|
*state = FE_HAS_SIGNAL;
|
|
|
|
ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
|
|
if (ret) {
|
|
deb_fe("%s:ret == %d\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
*state = FE_HAS_SIGNAL
|
|
| FE_HAS_CARRIER
|
|
| FE_HAS_VITERBI
|
|
| FE_HAS_SYNC;
|
|
|
|
if (result & PLL_STATUS_LOCKED)
|
|
*state |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
|
|
u16 *strength)
|
|
{
|
|
int ret;
|
|
u8 rbuf[37];
|
|
|
|
*strength = 0;
|
|
|
|
/* status register (incl. signal strength) : 0x89 */
|
|
/* TODO: read just the necessary registers [0x8B..0x8D]? */
|
|
ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
|
|
rbuf, sizeof(rbuf));
|
|
|
|
if (ret) {
|
|
deb_fe("%s:ret == %d\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
/* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
|
|
*strength = (rbuf[3] << 8) + rbuf[4];
|
|
if (rbuf[2])
|
|
*strength = 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* filter out un-supported properties to notify users */
|
|
static int jdvbt90502_set_property(struct dvb_frontend *fe,
|
|
struct dtv_property *tvp)
|
|
{
|
|
int r = 0;
|
|
|
|
switch (tvp->cmd) {
|
|
case DTV_DELIVERY_SYSTEM:
|
|
if (tvp->u.data != SYS_ISDBT)
|
|
r = -EINVAL;
|
|
break;
|
|
case DTV_CLEAR:
|
|
case DTV_TUNE:
|
|
case DTV_FREQUENCY:
|
|
break;
|
|
default:
|
|
r = -EINVAL;
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static int jdvbt90502_get_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
p->inversion = INVERSION_AUTO;
|
|
p->bandwidth_hz = 6000000;
|
|
p->code_rate_HP = FEC_AUTO;
|
|
p->code_rate_LP = FEC_AUTO;
|
|
p->modulation = QAM_64;
|
|
p->transmission_mode = TRANSMISSION_MODE_AUTO;
|
|
p->guard_interval = GUARD_INTERVAL_AUTO;
|
|
p->hierarchy = HIERARCHY_AUTO;
|
|
return 0;
|
|
}
|
|
|
|
static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
|
|
/**
|
|
* NOTE: ignore all the parameters except frequency.
|
|
* others should be fixed to the proper value for ISDB-T,
|
|
* but don't check here.
|
|
*/
|
|
|
|
struct jdvbt90502_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
|
|
deb_fe("%s: Freq:%d\n", __func__, p->frequency);
|
|
|
|
/* for recovery from DTV_CLEAN */
|
|
fe->dtv_property_cache.delivery_system = SYS_ISDBT;
|
|
|
|
ret = jdvbt90502_pll_set_freq(state, p->frequency);
|
|
if (ret) {
|
|
deb_fe("%s:ret == %d\n", __func__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* (reg, val) commad list to initialize this module.
|
|
* captured on a Windows box.
|
|
*/
|
|
static u8 init_code[][2] = {
|
|
{0x01, 0x40},
|
|
{0x04, 0x38},
|
|
{0x05, 0x40},
|
|
{0x07, 0x40},
|
|
{0x0F, 0x4F},
|
|
{0x11, 0x21},
|
|
{0x12, 0x0B},
|
|
{0x13, 0x2F},
|
|
{0x14, 0x31},
|
|
{0x16, 0x02},
|
|
{0x21, 0xC4},
|
|
{0x22, 0x20},
|
|
{0x2C, 0x79},
|
|
{0x2D, 0x34},
|
|
{0x2F, 0x00},
|
|
{0x30, 0x28},
|
|
{0x31, 0x31},
|
|
{0x32, 0xDF},
|
|
{0x38, 0x01},
|
|
{0x39, 0x78},
|
|
{0x3B, 0x33},
|
|
{0x3C, 0x33},
|
|
{0x48, 0x90},
|
|
{0x51, 0x68},
|
|
{0x5E, 0x38},
|
|
{0x71, 0x00},
|
|
{0x72, 0x08},
|
|
{0x77, 0x00},
|
|
{0xC0, 0x21},
|
|
{0xC1, 0x10},
|
|
{0xE4, 0x1A},
|
|
{0xEA, 0x1F},
|
|
{0x77, 0x00},
|
|
{0x71, 0x00},
|
|
{0x71, 0x00},
|
|
{0x76, 0x0C},
|
|
};
|
|
|
|
static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
|
|
|
|
static int jdvbt90502_init(struct dvb_frontend *fe)
|
|
{
|
|
int i = -1;
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
|
|
struct jdvbt90502_state *state = fe->demodulator_priv;
|
|
|
|
deb_fe("%s called.\n", __func__);
|
|
|
|
msg.addr = state->config.demod_address;
|
|
msg.flags = 0;
|
|
msg.len = 2;
|
|
for (i = 0; i < init_code_len; i++) {
|
|
msg.buf = init_code[i];
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
if (ret != 1)
|
|
goto error;
|
|
}
|
|
fe->dtv_property_cache.delivery_system = SYS_ISDBT;
|
|
msleep(100);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
|
|
static void jdvbt90502_release(struct dvb_frontend *fe)
|
|
{
|
|
struct jdvbt90502_state *state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
|
|
static struct dvb_frontend_ops jdvbt90502_ops;
|
|
|
|
struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
|
|
{
|
|
struct jdvbt90502_state *state = NULL;
|
|
|
|
deb_info("%s called.\n", __func__);
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->i2c = &d->i2c_adap;
|
|
state->config = friio_fe_config;
|
|
|
|
/* create dvb_frontend */
|
|
state->frontend.ops = jdvbt90502_ops;
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
if (jdvbt90502_init(&state->frontend) < 0)
|
|
goto error;
|
|
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops jdvbt90502_ops = {
|
|
.delsys = { SYS_ISDBT },
|
|
.info = {
|
|
.name = "Comtech JDVBT90502 ISDB-T",
|
|
.frequency_min = 473000000, /* UHF 13ch, center */
|
|
.frequency_max = 767142857, /* UHF 62ch, center */
|
|
.frequency_stepsize = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER,
|
|
.frequency_tolerance = 0,
|
|
|
|
/* NOTE: this driver ignores all parameters but frequency. */
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
|
|
FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO,
|
|
},
|
|
|
|
.release = jdvbt90502_release,
|
|
|
|
.init = jdvbt90502_init,
|
|
.write = _jdvbt90502_write,
|
|
|
|
.set_property = jdvbt90502_set_property,
|
|
|
|
.set_frontend = jdvbt90502_set_frontend,
|
|
.get_frontend = jdvbt90502_get_frontend,
|
|
|
|
.read_status = jdvbt90502_read_status,
|
|
.read_signal_strength = jdvbt90502_read_signal_strength,
|
|
};
|