77 lines
2.8 KiB
Text
77 lines
2.8 KiB
Text
* MSM Sleep Power Manager (mpm-v2)
|
|
|
|
The MPM acts a sleep power manager to shutdown the clock source and put the
|
|
device into a retention mode to save power. The MPM is also responsible for
|
|
waking up and bringing up the resources from sleep. The MPM driver configures
|
|
interrupts monitored by the MPM hardware before entering sleep through a
|
|
RPM interface.
|
|
|
|
The required nodes for the MPM driver are:
|
|
|
|
- compatible: "qcom, mpm-v2"
|
|
- reg: Specifies the base physical address(s) and the size of the MPM
|
|
registers. The MPM driver access two memory regions for confifure the
|
|
virtual MPM driver on the RPM. The first region is the memory space
|
|
shared with the virtual MPM driver. The second region is the address
|
|
to the register that triggers a interrupt to the RPM.
|
|
- reg-names: "vmpm" - string to identify the shared memory space region
|
|
"ipc" - string to identify the register that triggers a interrupt
|
|
- clocks: clock identifers used by clock driver while looking up mpm clocks.
|
|
- clock-names: name of the clock used by mpm driver.
|
|
- qcom,ipc-bit-offset: The bit to set in the ipc register that triggers a interrupt
|
|
to the RPM
|
|
- qcom,gic-parent: phandle to the gic interrupt controller
|
|
- qcom,gic-map: Provides a mapping of how a GIC interrupt is connect to a MPM. The
|
|
mapping is presented in tuples. Each tuple represents a MPM pin and
|
|
which GIC interrupt is routed to it. Since MPM monitors interrupts
|
|
only during system wide low power mode, system interrupts originating
|
|
from other processors can be ignored and assigned an MPM pin mapping
|
|
of 0xff.
|
|
- qcom,gpio-parent: phandle to the GPIO interrupt controller
|
|
- qcom,gpio-map: Provides a mapping of how a GPIO interrupt is connect to a MPM. The
|
|
mapping is presented in tuples. Each tuple represents a MPM pin and
|
|
which GIC interrupt is routed to it. Since MPM monitors interrupts
|
|
only during system wide low power mode, system interrupts originating
|
|
from other processors can be ignored and assigned an MPM pin mapping
|
|
of 0xff.
|
|
|
|
Optional Properties:
|
|
|
|
- qcom,num-mpm-irqs : Specifies the number of mpm interrupts supported on a
|
|
target. If the property isn't present, 64 interrupts are
|
|
considered for the target by default.
|
|
|
|
Example:
|
|
qcom,mpm@fc4281d0 {
|
|
compatible = "qcom,mpm-v2";
|
|
reg = <0xfc4281d0 0x1000>, /* MSM_RPM_MPM_BASE 4K*/
|
|
<0xfa006000 0x1000>; /* MSM_APCS_GCC_BASE 4K*/
|
|
reg-names = "vmpm", "ipc"
|
|
interrupts = <0 171 1>;
|
|
clocks = <&clock_rpm clk_xo_lpm_clk>;
|
|
clock-names = "xo";
|
|
|
|
qcom,ipc-bit-offset = <0>;
|
|
|
|
qcom,gic-parent = <&intc>;
|
|
qcom,gic-map = <25 132>,
|
|
<27 111>,
|
|
<0xff 48>,
|
|
<0xff 51>,
|
|
<0xff 52>,
|
|
<0xff 53>,
|
|
<0xff 54>,
|
|
<0xff 55>;
|
|
|
|
qcom,gpio-parent = <&msmgpio>;
|
|
qcom,gpio-map = <1 46>,
|
|
<2 150>,
|
|
<4 103>,
|
|
<5 104>,
|
|
<6 105>,
|
|
<7 106>,
|
|
<8 107>,
|
|
<53 37>,
|
|
<54 24>,
|
|
<55 14>;
|
|
};
|