archiso 74

This commit is contained in:
arcolinuxz 2023-12-23 10:40:19 +01:00
parent 333a3b6c12
commit b1c85fdc6a
18 changed files with 222 additions and 297 deletions

View file

@ -1,116 +0,0 @@
# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
KbdInteractiveAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin prohibit-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server

View file

@ -0,0 +1,3 @@
# Allow root login using password authentication
PasswordAuthentication yes
PermitRootLogin yes

View file

@ -1,44 +0,0 @@
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See journald.conf(5) for details.
[Journal]
Storage=volatile
#Compress=yes
#Seal=yes
#SplitMode=uid
#SyncIntervalSec=5m
#RateLimitIntervalSec=30s
#RateLimitBurst=10000
#SystemMaxUse=
#SystemKeepFree=
#SystemMaxFileSize=
#SystemMaxFiles=100
#RuntimeMaxUse=
#RuntimeKeepFree=
#RuntimeMaxFileSize=
#RuntimeMaxFiles=100
#MaxRetentionSec=
#MaxFileSec=1month
#ForwardToSyslog=no
#ForwardToKMsg=no
#ForwardToConsole=no
#ForwardToWall=yes
#TTYPath=/dev/console
#MaxLevelStore=debug
#MaxLevelSyslog=debug
#MaxLevelKMsg=notice
#MaxLevelConsole=info
#MaxLevelWall=emerg
#LineMax=48K
#ReadKMsg=yes
#Audit=yes

View file

@ -1,38 +0,0 @@
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See logind.conf(5) for details.
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#HandleLidSwitchExternalPower=suspend
#HandleLidSwitchDocked=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#HoldoffTimeoutSec=30s
#IdleAction=ignore
#IdleActionSec=30min
#RuntimeDirectorySize=10%
#RuntimeDirectoryInodes=400k
#RemoveIPC=yes
#InhibitorsMax=8192
#SessionsMax=8192

View file

@ -0,0 +1,2 @@
[Network]
IPv6PrivacyExtensions=yes

View file

@ -5,10 +5,12 @@
Name=en*
Name=eth*
[Link]
RequiredForOnline=routable
[Network]
DHCP=yes
MulticastDNS=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698

View file

@ -1,10 +1,12 @@
[Match]
Name=wl*
[Link]
RequiredForOnline=routable
[Network]
DHCP=yes
MulticastDNS=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698

View file

@ -1,9 +1,11 @@
[Match]
Name=ww*
[Link]
RequiredForOnline=routable
[Network]
DHCP=yes
IPv6PrivacyExtensions=yes
# systemd-networkd does not set per-interface-type default route metrics
# https://github.com/systemd/systemd/issues/17698

View file

@ -2,7 +2,7 @@
Description=Temporary /etc/pacman.d/gnupg directory
[Mount]
What=ramfs
What=tmpfs
Where=/etc/pacman.d/gnupg
Type=ramfs
Options=mode=0755
Type=tmpfs
Options=mode=0755,noswap

View file

@ -0,0 +1 @@
/usr/lib/systemd/system/pcscd.socket

View file

@ -1,21 +1,22 @@
#!/usr/bin/env bash
script_cmdline ()
{
script_cmdline() {
local param
for param in $(< /proc/cmdline); do
for param in $(</proc/cmdline); do
case "${param}" in
script=*) echo "${param#*=}" ; return 0 ;;
script=*)
echo "${param#*=}"
return 0
;;
esac
done
}
automated_script ()
{
automated_script() {
local script rt
script="$(script_cmdline)"
if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
if [[ "${script}" =~ ^((http|https|ftp)://) ]]; then
if [[ "${script}" =~ ^((http|https|ftp|tftp)://) ]]; then
# there's no synchronization for network availability before executing this script
printf '%s: waiting for network-online.target\n' "$0"
until systemctl --quiet is-active network-online.target; do

View file

@ -0,0 +1,4 @@
disable-ccid
disable-pinpad
pcsc-driver /usr/lib/libpcsclite.so
pcsc-shared

View file

@ -4,21 +4,22 @@
get_cmdline() {
local param
for param in $(< /proc/cmdline); do
for param in $(</proc/cmdline); do
case "${param}" in
$1=*) echo "${param##*=}";
return 0
;;
"${1}="*)
echo "${param##*=}"
return 0
;;
esac
done
}
mirror=$(get_cmdline mirror)
[[ $mirror = auto ]] && mirror=$(get_cmdline archiso_http_srv)
[[ $mirror ]] || exit 0
mirror="$(get_cmdline mirror)"
[[ "$mirror" == 'auto' ]] && mirror="$(get_cmdline archiso_http_srv)"
[[ -n "$mirror" ]] || exit 0
mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
cat >/etc/pacman.d/mirrorlist << EOF
cat >/etc/pacman.d/mirrorlist <<EOF
#
# Arch Linux repository mirrorlist
# Generated by archiso

View file

@ -3,7 +3,7 @@
# SPDX-License-Identifier: GPL-3.0-or-later
usage() {
cat <<- _EOF_
cat <<-_EOF_
live cd sound helper script.
Usage: livecdsound [OPTION]
OPTIONS
@ -14,14 +14,13 @@ usage() {
_EOF_
}
bugout () {
bugout() {
printf "/usr/local/bin/livecdsound: programming error"
stat_fail
}
echo_card_indices()
{
if [ -f /proc/asound/cards ] ; then
echo_card_indices() {
if [[ -f /proc/asound/cards ]]; then
sed -n -e's/^[[:space:]]*\([0-7]\)[[:space:]].*/\1/p' /proc/asound/cards
fi
}
@ -33,8 +32,8 @@ echo_card_indices()
# $1 <card id>
# $2 <control>
# $3 <level>
unmute_and_set_level(){
{ [ "$3" ] &&[ "$2" ] && [ "$1" ] ; } || bugout
unmute_and_set_level() {
[[ -n "$3" && -n "$2" && -n "$1" ]] || bugout
systemd-cat -t "livecdsound" printf "Setting: %s on card: %s to %s\n" "$2" "$1" "$3"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3" unmute
return 0
@ -42,9 +41,8 @@ unmute_and_set_level(){
# $1 <card id>
# $2 <control>
mute_and_zero_level()
{
{ [ "$1" ] && [ "$2" ] ; } || bugout
mute_and_zero_level() {
[[ -n "$1" && -n "$2" ]] || bugout
systemd-cat -t "livecdsound" printf "Muting control: %s on card: %s\n" "$2" "$1"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "0%" mute
return 0
@ -53,17 +51,15 @@ mute_and_zero_level()
# $1 <card ID>
# $2 <control>
# $3 "on" | "off"
switch_control()
{
{ [ "$3" ] && [ "$1" ] ; } || bugout
switch_control() {
[[ -n "$3" && -n "$1" ]] || bugout
systemd-cat -t "livecdsound" printf "Switching control: %s on card: %s to %s\n" "$2" "$1" "$3"
systemd-cat -t "livecdsound" amixer -c "$1" set "$2" "$3"
return 0
}
# $1 <card ID>
sanify_levels_on_card()
{
sanify_levels_on_card() {
unmute_and_set_level "$1" "Front" "80%"
unmute_and_set_level "$1" "Master" "80%"
unmute_and_set_level "$1" "Master Mono" "80%"
@ -134,94 +130,89 @@ sanify_levels_on_card()
}
# $1 <card ID> | "all"
sanify_levels()
{
sanify_levels() {
local ttsdml_returnstatus=0
local card
case "$1" in
all)
for card in $(echo_card_indices) ; do
sanify_levels_on_card "$card" || ttsdml_returnstatus=1
done
;;
*)
sanify_levels_on_card "$1" || ttsdml_returnstatus=1
;;
all)
for card in $(echo_card_indices); do
sanify_levels_on_card "$card" || ttsdml_returnstatus=1
done
;;
*)
sanify_levels_on_card "$1" || ttsdml_returnstatus=1
;;
esac
return $ttsdml_returnstatus
return "$ttsdml_returnstatus"
}
# List all cards that *should* be usable for PCM audio. In my experience,
# the console speaker (handled by the pcsp driver) isn't a suitable playback
# device, so we'll exclude it.
list_non_pcsp_cards()
{
list_non_pcsp_cards() {
for card in $(echo_card_indices); do
local cardfile="/proc/asound/card${card}/id"
if [ -r "$cardfile" ] && [ -f "$cardfile" ] && \
[ "$(cat "$cardfile")" != pcsp ]; then
if [[ -r "$cardfile" && -f "$cardfile" && "$(cat "$cardfile")" != pcsp ]]; then
echo "$card"
fi
done
}
# Properly initialize the sound card so that we have audio at boot.
unmute_all_cards()
{
unmute_all_cards() {
sanify_levels all
}
is_numeric() {
local str=$1
local str="$1"
[[ "$str" =~ ^[0-9]+$ ]]
}
set_default_card() {
local card=$1
sed -e "s/%card%/$card/g" < /usr/local/share/livecd-sound/asound.conf.in \
> /etc/asound.conf
local card="$1"
sed -e "s/%card%/$card/g" </usr/local/share/livecd-sound/asound.conf.in \
>/etc/asound.conf
}
play_on_card() {
local card=$1 file=$2
local card="$1" file="$2"
aplay -q "-Dplughw:$card,0" "$file"
}
# If there are multiple usable sound cards, prompt the user to choose one,
# using auditory feedback.
pick_a_card()
{
pick_a_card() {
set -f
usable_cards="$(list_non_pcsp_cards)"
num_usable_cards="$(wc -w <<< "$usable_cards")"
num_usable_cards="$(wc -w <<<"$usable_cards")"
if [ "$num_usable_cards" -eq 1 ]; then
if (( num_usable_cards == 1 )); then
systemd-cat -t "livecdsound" printf "Only one sound card is detected\n"
exit 0
fi
systemd-cat -t "livecdsound" printf "multiple sound cards detected\n"
for card in $usable_cards; do
for card in "${usable_cards[@]}"; do
if ! is_numeric "$card"; then
continue
fi
play_on_card "$card" /usr/share/livecd-sounds/pick-a-card.wav&
play_on_card "$card" /usr/share/livecd-sounds/pick-a-card.wav &
done
wait
sleep 1
for card in $usable_cards; do
for card in "${usable_cards[@]}"; do
if ! is_numeric "$card"; then
continue
fi
play_on_card "$card" /usr/share/livecd-sounds/beep.wav
if read -r -t 10; then
systemd-cat -t "livecdsound" printf "Selecting %s sound card as default\n" "$card"
set_default_card "$card"
break
fi
done
fi
play_on_card "$card" /usr/share/livecd-sounds/beep.wav
if read -r -t 10; then
systemd-cat -t "livecdsound" printf "Selecting %s sound card as default\n" "$card"
set_default_card "$card"
break
fi
done
}
if [[ $# -eq 0 ]]; then
if (( $# == 0 )); then
echo "error: No argument passed."
exit 1
fi

View file

@ -9,15 +9,19 @@ insmod exfat
insmod udf
# Use graphics-mode output
insmod all_video
insmod font
if loadfont "${prefix}/fonts/unicode.pf2" ; then
insmod all_video
set gfxmode="auto"
terminal_input console
terminal_output console
fi
# Enable serial console
insmod serial
insmod usbserial_common
insmod usbserial_ftdi
insmod usbserial_pl2303
insmod usbserial_usbdebug
if serial --unit=0 --speed=115200; then
terminal_input --append serial
terminal_output --append serial
@ -32,41 +36,62 @@ if [ -z "${ARCHISO_UUID}" ]; then
probe --set ARCHISO_UUID --fs-uuid "${root}"
fi
# Get a human readable platform identifier
if [ "${grub_platform}" == 'efi' ]; then
archiso_platform='UEFI'
if [ "${grub_cpu}" == 'x86_64' ]; then
archiso_platform="x64 ${archiso_platform}"
elif [ "${grub_cpu}" == 'i386' ]; then
archiso_platform="IA32 ${archiso_platform}"
else
archiso_platform="${grub_cpu} ${archiso_platform}"
fi
elif [ "${grub_platform}" == 'pc' ]; then
archiso_platform='BIOS'
else
archiso_platform="${grub_cpu} ${grub_platform}"
fi
# Set default menu entry
default=alci
timeout=15
timeout_style=menu
# GRUB init tune for accessibility
play 600 988 1 1319 4
# Menu entries
menuentry "Alci install medium (x86_64, UEFI)" --class arch --class gnu-linux --class gnu --class os --id 'alci' {
menuentry "Alci Linux install medium (%ARCH%, ${archiso_platform})" --class arch --class gnu-linux --class gnu --class os --id 'alci' {
set gfxpayload=keep
linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} cow_spacesize=4G copytoram=n
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID}
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
}
menuentry "Alci install medium with speakup screen reader (x86_64, UEFI)" --hotkey s --class arch --class gnu-linux --class gnu --class os --id 'alci-accessibility' {
menuentry "Alci Linux install medium with speakup screen reader (%ARCH%, ${archiso_platform})" --hotkey s --class arch --class gnu-linux --class gnu --class os --id 'alci-accessibility' {
set gfxpayload=keep
linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} accessibility=on cow_spacesize=4G copytoram=n
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} accessibility=on
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
}
if [ "${grub_platform}" == "efi" ]; then
if [ "${grub_cpu}" == "x86_64" ]; then
menuentry "Run Memtest86+ (RAM test)" --class memtest86 --class memtest --class gnu --class tool {
set gfxpayload=800x600,1024x768
linux /boot/memtest86+/memtest.efi
}
menuentry "UEFI Shell" --class efi {
insmod chain
if [ "${grub_platform}" == 'efi' -a "${grub_cpu}" == 'x86_64' -a -f '/boot/memtest86+/memtest.efi' ]; then
menuentry 'Run Memtest86+ (RAM test)' --class memtest86 --class memtest --class gnu --class tool {
set gfxpayload=800x600,1024x768
linux /boot/memtest86+/memtest.efi
}
fi
if [ "${grub_platform}" == 'pc' -a -f '/boot/memtest86+/memtest' ]; then
menuentry 'Run Memtest86+ (RAM test)' --class memtest86 --class memtest --class gnu --class tool {
set gfxpayload=800x600,1024x768
linux /boot/memtest86+/memtest
}
fi
if [ "${grub_platform}" == 'efi' ]; then
if [ "${grub_cpu}" == 'x86_64' -a -f '/shellx64.efi' ]; then
menuentry 'UEFI Shell' --class efi {
chainloader /shellx64.efi
}
elif [ "${grub_cpu}" == "i386" ]; then
menuentry "UEFI Shell" --class efi {
insmod chain
elif [ "${grub_cpu}" == "i386" -a -f '/shellia32.efi' ]; then
menuentry 'UEFI Shell' --class efi {
chainloader /shellia32.efi
}
fi
@ -76,12 +101,15 @@ if [ "${grub_platform}" == "efi" ]; then
}
fi
menuentry "System restart" --class reboot --class restart {
echo "System rebooting..."
menuentry 'System restart' --class reboot --class restart {
echo 'System rebooting...'
reboot
}
menuentry "System shutdown" --class shutdown --class poweroff {
echo "System shutting down..."
menuentry 'System shutdown' --class shutdown --class poweroff {
echo 'System shutting down...'
halt
}
# GRUB init tune for accessibility
play 600 988 1 1319 4

80
archiso/grub/loopback.cfg Normal file
View file

@ -0,0 +1,80 @@
# https://www.supergrubdisk.org/wiki/Loopback.cfg
# Search for the ISO volume
search --no-floppy --set=archiso_img_dev --file "${iso_path}"
probe --set archiso_img_dev_uuid --fs-uuid "${archiso_img_dev}"
# Get a human readable platform identifier
if [ "${grub_platform}" == 'efi' ]; then
archiso_platform='UEFI'
if [ "${grub_cpu}" == 'x86_64' ]; then
archiso_platform="x64 ${archiso_platform}"
elif [ "${grub_cpu}" == 'i386' ]; then
archiso_platform="IA32 ${archiso_platform}"
else
archiso_platform="${grub_cpu} ${archiso_platform}"
fi
elif [ "${grub_platform}" == 'pc' ]; then
archiso_platform='BIOS'
else
archiso_platform="${grub_cpu} ${grub_platform}"
fi
# Set default menu entry
default=archlinux
timeout=15
timeout_style=menu
# Menu entries
menuentry "Arch Linux install medium (%ARCH%, ${archiso_platform})" --class arch --class gnu-linux --class gnu --class os --id 'archlinux' {
set gfxpayload=keep
linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% img_dev=UUID=${archiso_img_dev_uuid} img_loop="${iso_path}"
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
}
menuentry "Arch Linux install medium with speakup screen reader (%ARCH%, ${archiso_platform})" --hotkey s --class arch --class gnu-linux --class gnu --class os --id 'archlinux-accessibility' {
set gfxpayload=keep
linux /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux archisobasedir=%INSTALL_DIR% img_dev=UUID=${archiso_img_dev_uuid} img_loop="${iso_path}" accessibility=on
initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img
}
if [ "${grub_platform}" == 'efi' -a "${grub_cpu}" == 'x86_64' -a -f '/boot/memtest86+/memtest.efi' ]; then
menuentry 'Run Memtest86+ (RAM test)' --class memtest86 --class memtest --class gnu --class tool {
set gfxpayload=800x600,1024x768
linux /boot/memtest86+/memtest.efi
}
fi
if [ "${grub_platform}" == 'pc' -a -f '/boot/memtest86+/memtest' ]; then
menuentry 'Run Memtest86+ (RAM test)' --class memtest86 --class memtest --class gnu --class tool {
set gfxpayload=800x600,1024x768
linux /boot/memtest86+/memtest
}
fi
if [ "${grub_platform}" == 'efi' ]; then
if [ "${grub_cpu}" == 'x86_64' -a -f '/shellx64.efi' ]; then
menuentry 'UEFI Shell' --class efi {
chainloader /shellx64.efi
}
elif [ "${grub_cpu}" == "i386" -a -f '/shellia32.efi' ]; then
menuentry 'UEFI Shell' --class efi {
chainloader /shellia32.efi
}
fi
menuentry 'UEFI Firmware Settings' --id 'uefi-firmware' {
fwsetup
}
fi
menuentry 'System shutdown' --class shutdown --class poweroff {
echo 'System shutting down...'
halt
}
menuentry 'System restart' --class reboot --class restart {
echo 'System rebooting...'
reboot
}

View file

@ -4,7 +4,9 @@ arch-install-scripts
archinstall
b43-fwcutter
base
bcachefs-tools
bind
bolt
brltty
broadcom-wl
btrfs-progs
@ -78,6 +80,7 @@ nvme-cli
open-iscsi
open-vm-tools
openconnect
openpgp-card-tools
openssh
openvpn
partclone
@ -96,6 +99,7 @@ rsync
rxvt-unicode-terminfo
screen
sdparm
sequoia-sq
sg3_utils
smartmontools
sof-firmware
@ -107,6 +111,7 @@ tcpdump
terminus-font
testdisk
tmux
tpm2-tools
tpm2-tss
udftools
usb_modeswitch

View file

@ -19,6 +19,7 @@ file_permissions=(
["/etc/shadow"]="0:0:400"
["/root"]="0:0:750"
["/root/.automated_script.sh"]="0:0:755"
["/root/.gnupg"]="0:0:700"
["/usr/local/bin/choose-mirror"]="0:0:755"
["/usr/local/bin/Installation_guide"]="0:0:755"
["/usr/local/bin/livecd-sound"]="0:0:755"