pinephone-keyboard/usb-flasher.c

/**
 * USB Programming tool for Pinephone keyboard
 *
 * Copyright (C) 2021  Ondřej Jirman <megi@xff.cz>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "common.c"

// }}}
// {{{ utils

int bootloader_open(void)
{
	int ret, fd;
	bool had_switch = false;

	// first check if keyboard USB device is available, if it is
	// we need to first switch to bootloader mode

	fd = open_usb_dev(0x04f3, 0x1812);
	if (fd >= 0) {
		printf("Found USB device for the vendor firmware, swithing to USB bootloader\n");

		for (unsigned i = 0; i <= 1; i++) {
			struct usbdevfs_disconnect_claim dc = {
				.interface = i,
			};

			ret = ioctl(fd, USBDEVFS_DISCONNECT_CLAIM, &dc);
			syscall_error(ret < 0, "USBDEVFS_DISCONNECT_CLAIM failed");
		}

                /*
		 * Bootloader mode is enabled via HID SET_REPORT:SET_FEATURE
		 * control transfer on EP0.
		 */

		/* Enter IAP command payload */
		uint8_t buf[8] = {
			0xbc,
			0x01,
		};
		struct usbdevfs_ctrltransfer ctrl = {
			.bRequestType =
				  (0u << 7) // host->device
				| (1u << 5) // class command
				| (1u << 0), // to interface
			.bRequest = 0x09, // HID SET_REPORT class command
			.wValue = 0x03bc, // HID SET_FEATURE sub-command / 0xbc = enter IAP
			.wIndex = 0,
			.wLength = 8,
			.timeout = 300,
			.data = buf,
		};

		ret = ioctl(fd, USBDEVFS_CONTROL, &ctrl);
		if (ret == 0)
			error("Failed to switch keyboard to IAP programming mode");

		had_switch = true;
		close(fd);
		goto wait_bl;
	}

	fd = open_usb_dev(0x04f3, 0xb001);
	if (fd >= 0) {
		printf("Found debugger USB device, swithing to USB bootloader\n");

		struct usbdevfs_disconnect_claim dc = {
			.interface = 0,
		};

		ret = ioctl(fd, USBDEVFS_DISCONNECT_CLAIM, &dc);
		syscall_error(ret < 0, "USBDEVFS_DISCONNECT_CLAIM failed");

		uint8_t buf[8] = { 0x01, };
		
		struct usbdevfs_urb urb = {
			.type = USBDEVFS_URB_TYPE_INTERRUPT,
			.endpoint = 0x01,
			.buffer = buf,
			.buffer_length = 8,
			.actual_length = 0,
		};

		ret = handle_urb(fd, &urb, 500);
		syscall_error(ret < 0, "handle_urb failed");

		had_switch = true;
		close(fd);
		goto wait_bl;
	}

wait_bl:
	// open the bootloader USB device (wait for it if we just switched to bootloader mode)
	for (int i = 0;; i++) {
		fd = open_usb_dev(0x04f3, 0x0905);
		if (fd >= 0) {
			printf("Found USB bootloader device\n");
			break;
		}

		if (!had_switch)
			error("Bootloader USB device not found");

		if (i > 16)
			error("Bootloader USB device did not appear after switching keyboard to IAP mode");

		usleep(250000);
	}

	for (unsigned i = 0; i <= 3; i++) {
		struct usbdevfs_disconnect_claim dc = {
			.interface = i,
		};

		ret = ioctl(fd, USBDEVFS_DISCONNECT_CLAIM, &dc);
		syscall_error(ret < 0, "USBDEVFS_DISCONNECT_CLAIM failed");
	}

	return fd;
}

// Bootloader endpoints:
enum {
	EP_CMD = 0x01,
	EP_STATUS = 0x82,
	EP_DATAOUT = 0x03,
	EP_DATAIN = 0x84,
};

static int usb_fd = -1;

void bootloader_command(uint8_t req[8])
{
	int ret;
	struct usbdevfs_urb urb = {
		.type = USBDEVFS_URB_TYPE_INTERRUPT,
		.endpoint = EP_CMD,
		.flags = USBDEVFS_URB_ZERO_PACKET,
		.buffer = req,
		.buffer_length = 8,
		.actual_length = 8,
	};

	ret = handle_urb(usb_fd, &urb, 1000);
	syscall_error(ret < 0, "handle_urb failed");

	debug("CMD:");
	for (int i = 0; i < urb.actual_length; i++)
		debug(" %02hhx", req[i]);
	debug("\n");
}

void bootloader_status(uint8_t res[4])
{
	int ret;
	struct usbdevfs_urb urb = {
		.type = USBDEVFS_URB_TYPE_INTERRUPT,
		.endpoint = EP_STATUS,
		.flags = USBDEVFS_URB_SHORT_NOT_OK,
		.buffer = res,
		.buffer_length = 4,
		.actual_length = 0,
	};

	ret = handle_urb(usb_fd, &urb, 1000);
	syscall_error(ret < 0, "handle_urb failed");
	
	debug("RES:");
	for (int i = 0; i < urb.actual_length; i++)
		debug(" %02hhx", res[i]);
	debug("\n");
}

enum {
	STATUS_READY = 1,
	STATUS_BUSY = 2,
	STATUS_SUCCESS = 3,
	STATUS_FAIL = 4,
	STATUS_ERROR = 5,
};

void bootloader_standard_status_check(void)
{
	uint8_t res[4];
	const char* msg = "Unknown";

	bootloader_status(res);

	uint16_t status = res[0] << 8 | res[1];
	uint8_t err = res[2];

	switch (status) {
	case STATUS_BUSY:
		printf("Busy\n");
		break;

	case STATUS_FAIL:
		error("Fail status returned");

	case STATUS_ERROR:
		switch (err) {
			case 0x1: msg = "Command is unknown"; break;
			case 0x2: msg = "Command stage is error"; break;
			case 0x3: msg = "Data stage is error"; break;
			case 0x4: msg = "ROM address is error"; break;
			case 0x5: msg = "Authority Key is incorrect"; break;
			case 0x6: msg = "Write ROM is not finish"; break;
			case 0x7: msg = "Write Option is not finish"; break;
			case 0x8: msg = "Length is over"; break;
			case 0x9: msg = "Length is less"; break;
			case 0xa: msg = "CheckSum is incorrect"; break;
			case 0xb: msg = "Write Flash is abnormal"; break;
			case 0xc: msg = "It is over ROM area"; break;
			case 0xd: msg = "ROM page is error"; break;
			case 0xe: msg = "Flash Key is error"; break;
			case 0xf: msg = "Option ROM address range error"; break;
		}

		error("Error status returned: %s", msg);
	}
}

int bootloader_read_data(uint8_t res[64])
{
	int ret;
	struct usbdevfs_urb urb = {
		.type = USBDEVFS_URB_TYPE_INTERRUPT,
		.endpoint = EP_DATAIN,
		.flags = USBDEVFS_URB_SHORT_NOT_OK,
		.buffer = res,
		.buffer_length = 64,
		.actual_length = 0,
//		.usercontext = (void*)(uintptr_t)0,
	};

	ret = handle_urb(usb_fd, &urb, 1000);
	syscall_error(ret < 0, "handle_urb failed");

	debug("DATA:");
	for (int i = 0; i < urb.actual_length; i++)
		debug(" %02hhx", res[i]);
	debug("\n");

	return urb.actual_length;
}

void bootloader_write_data(uint8_t res[64])
{
	int ret;
	struct usbdevfs_urb urb = {
		.type = USBDEVFS_URB_TYPE_INTERRUPT,
		.endpoint = EP_DATAOUT,
		.flags = 0,
		.buffer = res,
		.buffer_length = 64,
		.actual_length = 64,
//		.usercontext = (void*)(uintptr_t)0,
	};

	ret = handle_urb(usb_fd, &urb, 1000);
	syscall_error(ret < 0, "handle_urb failed");

	debug("DATA:");
	for (int i = 0; i < urb.actual_length; i++)
		debug(" %02hhx", res[i]);
	debug("\n");
}

#define CMD_TAG				0xc1

#define CMD_GETVERSPEC			0x40
#define CMD_GETVERFW			0x41
#define CMD_GETSTATUS			0x42
#define CMD_EXITAUTHMODE		0x43
#define CMD_GETAUTHLOCK			0x44
#define CMD_SETAUTHLOCK			0x45
#define CMD_ABORT			0x46
#define CMD_GETCHECKSUM			0x47
#define CMD_ENTRYIAP			0x20
#define CMD_FINISHEDIAP			0x21
#define CMD_CANCELIAP			0x23
#define CMD_SOFTWARERESET		0x24
#define CMD_BOOTCONDITION		0x25

#define CMD_WRITEROM			0xa0
#define CMD_WRITEROMFINISH		0xa1
#define CMD_WRITEOPTION			0xa2
#define CMD_WRITEOPTIONFINISH		0xa3
#define CMD_WRITECHECKSUM		0xa4

/*
 * - called from WriteOptData in some cases (getVerSpec >= 0x170) or A chips
 * - we probably don't need this?
 */
#define CMD_WRITECUSTOMINFO		0xa5 // 3:addr_l=0 4:addr_h=1 5:len_l 6:len_h 7:0xa9 8 :0x7f (sec key)
#define CMD_WRITECUSTOMINFOFINISH	0xa6 // 3:csum

#define CMD_READROM			0xe0
#define CMD_READROMFINISH		0xe1
#define CMD_READOPTION			0xe2
#define CMD_READOPTIONFINISH		0xe3

#define CMD_READDATAREQUEST		0xe4 // not implemented

#define AUTH_KEY [6] = 0xa9, [7] = 0x7f

uint16_t cmd_get_ver_spec(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_GETVERSPEC, });
	uint8_t res[4];
	bootloader_status(res);
	return res[0] << 8 | res[1];
}

uint16_t cmd_get_ver_fw(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_GETVERFW, });
	uint8_t res[4];
	bootloader_status(res);
	return res[0] << 8 | res[1];
}

enum {
	DEV_STATUS_IDLE = 1,
	DEV_STATUS_IAP,
	DEV_STATUS_WR_ROM,
	DEV_STATUS_WR_OPT,
	DEV_STATUS_WR_CSUM,
	DEV_STATUS_RD_ROM,
	DEV_STATUS_RD_OPT,
};

uint8_t cmd_get_status(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_GETSTATUS, });
	uint8_t res[4];
	bootloader_status(res);
	return res[2];
}

void cmd_exit_auth_mode(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_EXITAUTHMODE, });
	bootloader_standard_status_check();
}

/* returns AUTHKEY */
uint8_t cmd_get_auth_lock(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_GETAUTHLOCK, });
	uint8_t res[4];
	bootloader_status(res);
	return res[0] ^ 0x24;
}

/* expects AUTHKEY */
void cmd_set_auth_lock(uint8_t key)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_SETAUTHLOCK, key ^ 0x58, });
	bootloader_standard_status_check();
}

void cmd_abort(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_ABORT, });
	bootloader_standard_status_check();
}

void cmd_unlock(void)
{
	cmd_set_auth_lock(cmd_get_auth_lock());
}

enum {
	CHECKSUM_TYPE_BOOT = 0,
	CHECKSUM_TYPE_MAIN = 1,
	CHECKSUM_TYPE_ALL = 2, // may not work
};

uint16_t cmd_get_checksum(uint8_t type)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_GETCHECKSUM, type, });
	uint8_t res[4];
	bootloader_status(res);
	return res[0] << 8 | res[1];
}

void cmd_entry_iap(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_ENTRYIAP, AUTH_KEY, });
	bootloader_standard_status_check();
}

void cmd_finished_iap(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_FINISHEDIAP, AUTH_KEY, });
	bootloader_standard_status_check();
}

void cmd_cancel_iap(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_CANCELIAP, });
	bootloader_standard_status_check();
}

void cmd_software_reset(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_SOFTWARERESET, });
	bootloader_standard_status_check();
}

enum {
	BOOT_COND1_P80_ENTRY = 1,
	BOOT_COND1_NO_APP_ENTRY = 2,
	BOOT_COND1_APP_JUMP_ENTRY = 4,
};

uint8_t cmd_boot_condition(void)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_BOOTCONDITION, });
	uint8_t res[4];
	bootloader_status(res);
	return res[2];
}

void cmd_read_option(uint8_t opts[128])
{
	uint16_t addr = 128;
	uint16_t len = 128;

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_READOPTION,
					  addr & 0xff, addr >> 8,
					  len & 0xff, len >> 8, });
	bootloader_standard_status_check();

	bootloader_read_data(opts);
	bootloader_read_data(opts + 64);

	uint8_t csum = 0;
	for (int i = 0; i < len; i++)
		csum += opts[i];

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_READOPTIONFINISH, csum, });
	bootloader_standard_status_check();
}

void cmd_read_rom(uint8_t* data, uint16_t addr, uint16_t len)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_READROM,
					  addr & 0xff, addr >> 8,
					  len & 0xff, len >> 8, });
	bootloader_standard_status_check();

	for (int i = 0; i < len / 64; i++)
		bootloader_read_data(data + 64 * i);

	uint8_t csum = 0;
	for (int i = 0; i < len; i++)
		csum += data[i];

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_READROMFINISH, csum, });
	bootloader_standard_status_check();
}

void cmd_write_rom(uint8_t* data, uint16_t addr, uint16_t len)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_WRITEROM,
					  addr & 0xff, addr >> 8,
					  len & 0xff, len >> 8,
					  AUTH_KEY, });
	bootloader_standard_status_check();

	for (int i = 0; i < len / 64; i++)
		bootloader_write_data(data + 64 * i);

	uint8_t csum = 0;
	for (int i = 0; i < len; i++)
		csum += data[i];

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_WRITEROMFINISH, csum, });
	bootloader_standard_status_check();
}

// risky function, cmd_write_option(opts, 0x80, 128)
void cmd_write_option(uint8_t* data, uint16_t addr, uint16_t len)
{
	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_WRITEOPTION,
					  addr & 0xff, addr >> 8,
					  len & 0xff, len >> 8,
					  AUTH_KEY, });
	bootloader_standard_status_check();

	for (int i = 0; i < len / 64; i++)
		bootloader_write_data(data + 64 * i);

	uint8_t csum = 0;
	for (int i = 0; i < len; i++)
		csum += data[i];

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_WRITEOPTIONFINISH, csum, });
	bootloader_standard_status_check();
}

// writes checksum into the correct location in the option eeprom
void cmd_write_checksum(uint16_t csum)
{
	uint16_t addr = 0xfc;

	bootloader_command((uint8_t[8]) { CMD_TAG, CMD_WRITECHECKSUM,
					  addr & 0xff, addr >> 8,
					  csum & 0xff, csum >> 8,
					  AUTH_KEY, });
	bootloader_standard_status_check();
}

// }}}

const char* dev_status_text(uint8_t status)
{
	switch (status) {
	case DEV_STATUS_IDLE:    return "Idle";
	case DEV_STATUS_IAP:     return "IAP";
	case DEV_STATUS_WR_ROM:  return "Write ROM";
	case DEV_STATUS_WR_OPT:  return "Write Option";
	case DEV_STATUS_WR_CSUM: return "Write Checksum";
	case DEV_STATUS_RD_ROM:  return "Read ROM";
	case DEV_STATUS_RD_OPT:  return "Read Option";
	default:                 return "None";
	}
}

const char* boot_cond_text(uint8_t status)
{
	switch (status) {
	case BOOT_COND1_P80_ENTRY:       return "P80";
	case BOOT_COND1_NO_APP_ENTRY:    return "NO APP";
	case BOOT_COND1_APP_JUMP_ENTRY:  return "APP JUMP";
	default:                         return "Unknown";
	}
}

static void usage(void)
{
	printf(
	       "Usage: ppkb-usb-flasher [--rom-in <path>] [--rom-out <path>] [--verbose]\n"
	       "                        [--help] [<read|write|info|reset>...]\n"
	       "\n"
	       "Options:\n"
	       "  -i, --rom-in <path>   Specify path to binary file you want to flash.\n"
	       "  -o, --rom-out <path>  Specify path where you want to store the contents\n"
	       "                        of code ROM read from the device.\n"
	       "  -s, --size <size>     Specify how many bytes of code rom to flash\n"
	       "                        starting from offset 0x2000 in the rom file.\n"
	       "  -v, --verbose         Show details of what's going on.\n"
	       "  -h, --help            This help.\n"
	       "\n"
	       "Commands:\n"
	       "  info      Display information about the firmware.\n"
	       "  read      Read ROM from the device to --rom-out file.\n"
	       "  write     Flash ROM file to the device from --rom-in.\n"
	       "  reset     Perform software reset of the MCU.\n"
	       "\n"
	       "Format of the ROM files is a flat binary. Only the part of it starting\n"
	       "from 0x2000 will be flashed. Use -s to specify how many bytes to write.\n"
	       "\n"
	       "Pinephone keyboard USB flashing tool " VERSION "\n"
	       "Written by Ondrej Jirman <megi@xff.cz>, 2021\n"
	       "Licensed under GPLv3, see https://xff.cz/git/pinephone-keyboard/ for\n"
	       "more information.\n"
	);

	exit(2);
}

int main(int ac, char* av[])
{
	char* rom_in = NULL;
	char* rom_out = NULL;
	int size = 0x1200;
	int ret;

	while (1) {
		int option_index = 0;
		struct option long_options[] = {
			{ "rom-in",  required_argument, 0, 'i' },
			{ "rom-out", required_argument, 0, 'o' },
			{ "size"   , required_argument, 0, 's' },
			{ "verbose", no_argument,       0, 'v' },
			{ "help",    no_argument,       0, 'h' },
			{ 0,         0,                 0,  0  }
		};

		int c = getopt_long(ac, av, "i:o:s:vh", long_options, &option_index);
		if (c == -1)
			break;

		switch (c) {
		case 'o':
			rom_out = strdup(optarg);
			break;
		case 'i':
			rom_in = strdup(optarg);
			break;
		case 's':
			if (strstr(optarg, "0x") == optarg) {
				errno = 0;
				char* next = NULL;
				size = strtol(optarg + 2, &next, 16);
				if (errno || next == optarg + 2) {
					printf("ERROR: Can't parse --size %s\n\n", optarg);
					usage();
				}
			} else {
				errno = 0;
				char* next = NULL;
				size = strtol(optarg, &next, 10);
				if (errno || next == optarg) {
					printf("ERROR: Can't parse --size %s\n\n", optarg);
					usage();
				}
			}
			break;
		case 'v':
			verbose = 1;
			break;
		case 'h':
		case '?':
		default:
			usage();
			break;
		}
	}

	if (optind == ac)
		usage();

	if (size < 64) {
		printf("ERROR: --size 0x%04x too small\n\n", size);
		usage();
	}

	if (size > 0x6000) {
		printf("ERROR: --size 0x%04x too large\n\n", size);
		usage();
	}

	if (size % 64 != 0) {
		printf("ERROR: --size 0x%04x is not multiple of 64\n\n", size);
		usage();
	}

	for (int i = optind; i < ac; i++) {
		if (!strcmp(av[i], "read")) {
			if (!rom_out) {
				printf("ERROR: You must specify target file to write rom contents to via --rom-out\n\n");
				usage();
			}
		} else if (!strcmp(av[i], "write")) {
			if (!rom_in) {
				printf("ERROR: You must source file for flashing via --rom-in\n\n");
				usage();
			}
		} else if (!strcmp(av[i], "info")) {
			;
		} else if (!strcmp(av[i], "reset")) {
			;
		} else {
			printf("ERROR: Unknown command: %s\n\n", av[i]);
			usage();
		}
	}

	printf("Searching for bootloader USB device\n");
	usb_fd = bootloader_open();

	printf("Resetting bootloader state\n");
	cmd_abort();

	for (int i = optind; i < ac; i++) {
		if (!strcmp(av[i], "read")) {
			uint8_t rom[0x8000];
			memset(rom, 0xff, sizeof rom);

			printf("Reading code ROM\n");
			cmd_read_rom(rom, 0, 0x8000);

			int fd = open(rom_out, O_WRONLY | O_CREAT | O_TRUNC, 0666);
			if (fd >= 0) {
				ssize_t wr = write(fd, rom, 0x8000);
				syscall_error(wr < 0, "write failed");
				close(fd);
			}
		} else if (!strcmp(av[i], "write")) {
			int fd;

			uint8_t rom[0x8000];
			memset(rom, 0xff, sizeof rom);

			fd = open(rom_in, O_RDONLY);
			syscall_error(fd < 0, "open(%s) failed", rom_in);
			ssize_t len = read(fd, rom, 0x8000);
			syscall_error(len < 0, "read failed");
			close(fd);
			if (len != 0x8000)
				error("Invalid ROM file (%s) size (%d), must be 32768 bytes", rom_in, (int)len);

			printf("Unlocking\n");
			cmd_unlock();

			printf("Entering flasing mode\n");
			cmd_entry_iap();

			printf("Flashing code ROM\n");
			cmd_write_rom(rom + 0x2000, 0x2000, size);

			printf("Finishing flashing\n");
			cmd_finished_iap();
		} else if (!strcmp(av[i], "info")) {
			printf("Bootlaoder version: 0x%04hx\n", cmd_get_ver_spec());
			printf("Firmware version: 0x%04hx\n", cmd_get_ver_fw());

			uint8_t opts[128];
			cmd_read_option(opts);

			uint16_t icid = (opts[124] | opts[125] << 8) ^ (opts[121] | opts[122] << 8);
			printf("ICID: 0x%04hx\n", icid);

			uint8_t bootcond = cmd_boot_condition();
			printf("Booted via: %s\n", boot_cond_text(bootcond));

			uint16_t csum_boot = cmd_get_checksum(CHECKSUM_TYPE_BOOT);
			uint16_t csum_app = cmd_get_checksum(CHECKSUM_TYPE_MAIN);
			printf("Checksums: boot=0x%04hx app=0x%04hx\n", csum_boot, csum_app);

			/*
			 * Checksums: boot=d355 app=449b
			 *
			 * Option ROM from factory:
			 *
			 *  CODE0 at 116: 0xff
			 *   - 24MHz intosc mode, WDT disabled, 256kHz low freq mode
			 *  CODE2:
			 *   - BIT(0)
			 *  CODE3 at 119: 0xff
			 *   - eeprom and hw reset disabled
			 *   - BITS(2..0) = reset button config
			 *   - BIT(3) = eeprom enable
			 *
			 * 0: fc 39 01 7f
			 * 4: fe ff ff ff
			 *
			 * ...: ff ff ff ff
			 *
			 * 120: df     // read by bootloader & 0x6 = 0x6: 24MHz,
			 * 121: 0a     // part of ICID (ICID is this value XORed with CSUM at 124, wtf?)
			 * 122: 4f     // part of ICID (ICID is this value XORed with CSUM at 125, wtf?)
			 * 123: 20     // ??? some count?
			 * 124: 9b 44  // checksum (written by CMD_WRITECHECKSUM)
			 * 126: 49     // ???
			 * 127: aa     // app OK flag (0xaa = ok)
			 */

			printf("Option ROM dump:\n");
			for (int i = 0; i < 128; i++)
				if (opts[i] != 0xff)
					printf("0x%02x (%d): 0x%02hhx\n", i + 128, i, opts[i]);
		} else if (!strcmp(av[i], "reset")) {
			printf("Restarting the MCU\n");
			cmd_software_reset();
		} else {
			printf("ERROR: Unknown command: %s\n\n", av[i]);
			usage();
		}
	}

	return 0;
}