virtualx-engine/scene/resources/skeleton_modification_2d_jiggle.cpp

569 lines
26 KiB
C++
Raw Normal View History

New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
/*************************************************************************/
/* skeleton_modification_2d_jiggle.cpp */
/*************************************************************************/
/* This file is part of: */
/* GODOT ENGINE */
/* https://godotengine.org */
/*************************************************************************/
/* Copyright (c) 2007-2022 Juan Linietsky, Ariel Manzur. */
/* Copyright (c) 2014-2022 Godot Engine contributors (cf. AUTHORS.md). */
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
/* */
/* Permission is hereby granted, free of charge, to any person obtaining */
/* a copy of this software and associated documentation files (the */
/* "Software"), to deal in the Software without restriction, including */
/* without limitation the rights to use, copy, modify, merge, publish, */
/* distribute, sublicense, and/or sell copies of the Software, and to */
/* permit persons to whom the Software is furnished to do so, subject to */
/* the following conditions: */
/* */
/* The above copyright notice and this permission notice shall be */
/* included in all copies or substantial portions of the Software. */
/* */
/* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, */
/* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.*/
/* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY */
/* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, */
/* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE */
/* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
/*************************************************************************/
#include "skeleton_modification_2d_jiggle.h"
#include "scene/2d/skeleton_2d.h"
bool SkeletonModification2DJiggle::_set(const StringName &p_path, const Variant &p_value) {
String path = p_path;
if (path.begins_with("joint_data/")) {
int which = path.get_slicec('/', 1).to_int();
String what = path.get_slicec('/', 2);
ERR_FAIL_INDEX_V(which, jiggle_data_chain.size(), false);
if (what == "bone2d_node") {
set_jiggle_joint_bone2d_node(which, p_value);
} else if (what == "bone_index") {
set_jiggle_joint_bone_index(which, p_value);
} else if (what == "override_defaults") {
set_jiggle_joint_override(which, p_value);
} else if (what == "stiffness") {
set_jiggle_joint_stiffness(which, p_value);
} else if (what == "mass") {
set_jiggle_joint_mass(which, p_value);
} else if (what == "damping") {
set_jiggle_joint_damping(which, p_value);
} else if (what == "use_gravity") {
set_jiggle_joint_use_gravity(which, p_value);
} else if (what == "gravity") {
set_jiggle_joint_gravity(which, p_value);
}
return true;
} else {
if (path == "use_colliders") {
set_use_colliders(p_value);
} else if (path == "collision_mask") {
set_collision_mask(p_value);
}
}
return true;
}
bool SkeletonModification2DJiggle::_get(const StringName &p_path, Variant &r_ret) const {
String path = p_path;
if (path.begins_with("joint_data/")) {
int which = path.get_slicec('/', 1).to_int();
String what = path.get_slicec('/', 2);
ERR_FAIL_INDEX_V(which, jiggle_data_chain.size(), false);
if (what == "bone2d_node") {
r_ret = get_jiggle_joint_bone2d_node(which);
} else if (what == "bone_index") {
r_ret = get_jiggle_joint_bone_index(which);
} else if (what == "override_defaults") {
r_ret = get_jiggle_joint_override(which);
} else if (what == "stiffness") {
r_ret = get_jiggle_joint_stiffness(which);
} else if (what == "mass") {
r_ret = get_jiggle_joint_mass(which);
} else if (what == "damping") {
r_ret = get_jiggle_joint_damping(which);
} else if (what == "use_gravity") {
r_ret = get_jiggle_joint_use_gravity(which);
} else if (what == "gravity") {
r_ret = get_jiggle_joint_gravity(which);
}
return true;
} else {
if (path == "use_colliders") {
r_ret = get_use_colliders();
} else if (path == "collision_mask") {
r_ret = get_collision_mask();
}
}
return true;
}
void SkeletonModification2DJiggle::_get_property_list(List<PropertyInfo> *p_list) const {
p_list->push_back(PropertyInfo(Variant::BOOL, "use_colliders", PROPERTY_HINT_NONE, "", PROPERTY_USAGE_DEFAULT));
if (use_colliders) {
p_list->push_back(PropertyInfo(Variant::INT, "collision_mask", PROPERTY_HINT_LAYERS_2D_PHYSICS, "", PROPERTY_USAGE_DEFAULT));
}
for (int i = 0; i < jiggle_data_chain.size(); i++) {
String base_string = "joint_data/" + itos(i) + "/";
p_list->push_back(PropertyInfo(Variant::INT, base_string + "bone_index", PROPERTY_HINT_NONE, "", PROPERTY_USAGE_DEFAULT));
p_list->push_back(PropertyInfo(Variant::NODE_PATH, base_string + "bone2d_node", PROPERTY_HINT_NODE_PATH_VALID_TYPES, "Bone2D", PROPERTY_USAGE_DEFAULT));
p_list->push_back(PropertyInfo(Variant::BOOL, base_string + "override_defaults", PROPERTY_HINT_NONE, "", PROPERTY_USAGE_DEFAULT));
if (jiggle_data_chain[i].override_defaults) {
p_list->push_back(PropertyInfo(Variant::FLOAT, base_string + "stiffness", PROPERTY_HINT_RANGE, "0, 1000, 0.01", PROPERTY_USAGE_DEFAULT));
p_list->push_back(PropertyInfo(Variant::FLOAT, base_string + "mass", PROPERTY_HINT_RANGE, "0, 1000, 0.01", PROPERTY_USAGE_DEFAULT));
p_list->push_back(PropertyInfo(Variant::FLOAT, base_string + "damping", PROPERTY_HINT_RANGE, "0, 1, 0.01", PROPERTY_USAGE_DEFAULT));
p_list->push_back(PropertyInfo(Variant::BOOL, base_string + "use_gravity", PROPERTY_HINT_NONE, "", PROPERTY_USAGE_DEFAULT));
if (jiggle_data_chain[i].use_gravity) {
p_list->push_back(PropertyInfo(Variant::VECTOR2, base_string + "gravity", PROPERTY_HINT_NONE, "", PROPERTY_USAGE_DEFAULT));
}
}
}
}
void SkeletonModification2DJiggle::_execute(float p_delta) {
ERR_FAIL_COND_MSG(!stack || !is_setup || stack->skeleton == nullptr,
"Modification is not setup and therefore cannot execute!");
if (!enabled) {
return;
}
if (target_node_cache.is_null()) {
WARN_PRINT_ONCE("Target cache is out of date. Attempting to update...");
update_target_cache();
return;
}
Node2D *target = Object::cast_to<Node2D>(ObjectDB::get_instance(target_node_cache));
if (!target || !target->is_inside_tree()) {
ERR_PRINT_ONCE("Target node is not in the scene tree. Cannot execute modification!");
return;
}
for (int i = 0; i < jiggle_data_chain.size(); i++) {
_execute_jiggle_joint(i, target, p_delta);
}
}
void SkeletonModification2DJiggle::_execute_jiggle_joint(int p_joint_idx, Node2D *p_target, float p_delta) {
// Adopted from: https://wiki.unity3d.com/index.php/JiggleBone
// With modifications by TwistedTwigleg.
if (jiggle_data_chain[p_joint_idx].bone_idx <= -1 || jiggle_data_chain[p_joint_idx].bone_idx > stack->skeleton->get_bone_count()) {
ERR_PRINT_ONCE("Jiggle joint " + itos(p_joint_idx) + " bone index is invalid. Cannot execute modification on joint...");
return;
}
if (jiggle_data_chain[p_joint_idx].bone2d_node_cache.is_null() && !jiggle_data_chain[p_joint_idx].bone2d_node.is_empty()) {
WARN_PRINT_ONCE("Bone2D cache for joint " + itos(p_joint_idx) + " is out of date. Updating...");
jiggle_joint_update_bone2d_cache(p_joint_idx);
}
Bone2D *operation_bone = stack->skeleton->get_bone(jiggle_data_chain[p_joint_idx].bone_idx);
if (!operation_bone) {
ERR_PRINT_ONCE("Jiggle joint " + itos(p_joint_idx) + " does not have a Bone2D node or it cannot be found!");
return;
}
Transform2D operation_bone_trans = operation_bone->get_global_transform();
Vector2 target_position = p_target->get_global_position();
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
jiggle_data_chain.write[p_joint_idx].force = (target_position - jiggle_data_chain[p_joint_idx].dynamic_position) * jiggle_data_chain[p_joint_idx].stiffness * p_delta;
if (jiggle_data_chain[p_joint_idx].use_gravity) {
jiggle_data_chain.write[p_joint_idx].force += jiggle_data_chain[p_joint_idx].gravity * p_delta;
}
jiggle_data_chain.write[p_joint_idx].acceleration = jiggle_data_chain[p_joint_idx].force / jiggle_data_chain[p_joint_idx].mass;
jiggle_data_chain.write[p_joint_idx].velocity += jiggle_data_chain[p_joint_idx].acceleration * (1 - jiggle_data_chain[p_joint_idx].damping);
jiggle_data_chain.write[p_joint_idx].dynamic_position += jiggle_data_chain[p_joint_idx].velocity + jiggle_data_chain[p_joint_idx].force;
jiggle_data_chain.write[p_joint_idx].dynamic_position += operation_bone_trans.get_origin() - jiggle_data_chain[p_joint_idx].last_position;
jiggle_data_chain.write[p_joint_idx].last_position = operation_bone_trans.get_origin();
// Collision detection/response
if (use_colliders) {
if (execution_mode == SkeletonModificationStack2D::EXECUTION_MODE::execution_mode_physics_process) {
Ref<World2D> world_2d = stack->skeleton->get_world_2d();
ERR_FAIL_COND(world_2d.is_null());
PhysicsDirectSpaceState2D *space_state = PhysicsServer2D::get_singleton()->space_get_direct_state(world_2d->get_space());
PhysicsDirectSpaceState2D::RayResult ray_result;
PhysicsDirectSpaceState2D::RayParameters ray_params;
ray_params.from = operation_bone_trans.get_origin();
ray_params.to = jiggle_data_chain[p_joint_idx].dynamic_position;
ray_params.collision_mask = collision_mask;
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
// Add exception support?
bool ray_hit = space_state->intersect_ray(ray_params, ray_result);
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
if (ray_hit) {
jiggle_data_chain.write[p_joint_idx].dynamic_position = jiggle_data_chain[p_joint_idx].last_noncollision_position;
jiggle_data_chain.write[p_joint_idx].acceleration = Vector2(0, 0);
jiggle_data_chain.write[p_joint_idx].velocity = Vector2(0, 0);
} else {
jiggle_data_chain.write[p_joint_idx].last_noncollision_position = jiggle_data_chain[p_joint_idx].dynamic_position;
}
} else {
WARN_PRINT_ONCE("Jiggle 2D modifier: You cannot detect colliders without the stack mode being set to _physics_process!");
}
}
// Rotate the bone using the dynamic position!
operation_bone_trans = operation_bone_trans.looking_at(jiggle_data_chain[p_joint_idx].dynamic_position);
operation_bone_trans.set_rotation(operation_bone_trans.get_rotation() - operation_bone->get_bone_angle());
// Reset scale
operation_bone_trans.set_scale(operation_bone->get_global_scale());
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
operation_bone->set_global_transform(operation_bone_trans);
stack->skeleton->set_bone_local_pose_override(jiggle_data_chain[p_joint_idx].bone_idx, operation_bone->get_transform(), stack->strength, true);
}
void SkeletonModification2DJiggle::_update_jiggle_joint_data() {
for (int i = 0; i < jiggle_data_chain.size(); i++) {
if (!jiggle_data_chain[i].override_defaults) {
set_jiggle_joint_stiffness(i, stiffness);
set_jiggle_joint_mass(i, mass);
set_jiggle_joint_damping(i, damping);
set_jiggle_joint_use_gravity(i, use_gravity);
set_jiggle_joint_gravity(i, gravity);
}
}
}
void SkeletonModification2DJiggle::_setup_modification(SkeletonModificationStack2D *p_stack) {
stack = p_stack;
if (stack) {
is_setup = true;
if (stack->skeleton) {
for (int i = 0; i < jiggle_data_chain.size(); i++) {
int bone_idx = jiggle_data_chain[i].bone_idx;
if (bone_idx > 0 && bone_idx < stack->skeleton->get_bone_count()) {
Bone2D *bone2d_node = stack->skeleton->get_bone(bone_idx);
jiggle_data_chain.write[i].dynamic_position = bone2d_node->get_global_position();
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 20:02:24 +02:00
}
}
}
update_target_cache();
}
}
void SkeletonModification2DJiggle::update_target_cache() {
if (!is_setup || !stack) {
ERR_PRINT_ONCE("Cannot update target cache: modification is not properly setup!");
return;
}
target_node_cache = ObjectID();
if (stack->skeleton) {
if (stack->skeleton->is_inside_tree()) {
if (stack->skeleton->has_node(target_node)) {
Node *node = stack->skeleton->get_node(target_node);
ERR_FAIL_COND_MSG(!node || stack->skeleton == node,
"Cannot update target cache: node is this modification's skeleton or cannot be found!");
ERR_FAIL_COND_MSG(!node->is_inside_tree(),
"Cannot update target cache: node is not in scene tree!");
target_node_cache = node->get_instance_id();
}
}
}
}
void SkeletonModification2DJiggle::jiggle_joint_update_bone2d_cache(int p_joint_idx) {
ERR_FAIL_INDEX_MSG(p_joint_idx, jiggle_data_chain.size(), "Cannot update bone2d cache: joint index out of range!");
if (!is_setup || !stack) {
ERR_PRINT_ONCE("Cannot update Jiggle " + itos(p_joint_idx) + " Bone2D cache: modification is not properly setup!");
return;
}
jiggle_data_chain.write[p_joint_idx].bone2d_node_cache = ObjectID();
if (stack->skeleton) {
if (stack->skeleton->is_inside_tree()) {
if (stack->skeleton->has_node(jiggle_data_chain[p_joint_idx].bone2d_node)) {
Node *node = stack->skeleton->get_node(jiggle_data_chain[p_joint_idx].bone2d_node);
ERR_FAIL_COND_MSG(!node || stack->skeleton == node,
"Cannot update Jiggle joint " + itos(p_joint_idx) + " Bone2D cache: node is this modification's skeleton or cannot be found!");
ERR_FAIL_COND_MSG(!node->is_inside_tree(),
"Cannot update Jiggle joint " + itos(p_joint_idx) + " Bone2D cache: node is not in scene tree!");
jiggle_data_chain.write[p_joint_idx].bone2d_node_cache = node->get_instance_id();
Bone2D *bone = Object::cast_to<Bone2D>(node);
if (bone) {
jiggle_data_chain.write[p_joint_idx].bone_idx = bone->get_index_in_skeleton();
} else {
ERR_FAIL_MSG("Jiggle joint " + itos(p_joint_idx) + " Bone2D cache: Nodepath to Bone2D is not a Bone2D node!");
}
}
}
}
}
void SkeletonModification2DJiggle::set_target_node(const NodePath &p_target_node) {
target_node = p_target_node;
update_target_cache();
}
NodePath SkeletonModification2DJiggle::get_target_node() const {
return target_node;
}
void SkeletonModification2DJiggle::set_stiffness(float p_stiffness) {
ERR_FAIL_COND_MSG(p_stiffness < 0, "Stiffness cannot be set to a negative value!");
stiffness = p_stiffness;
_update_jiggle_joint_data();
}
float SkeletonModification2DJiggle::get_stiffness() const {
return stiffness;
}
void SkeletonModification2DJiggle::set_mass(float p_mass) {
ERR_FAIL_COND_MSG(p_mass < 0, "Mass cannot be set to a negative value!");
mass = p_mass;
_update_jiggle_joint_data();
}
float SkeletonModification2DJiggle::get_mass() const {
return mass;
}
void SkeletonModification2DJiggle::set_damping(float p_damping) {
ERR_FAIL_COND_MSG(p_damping < 0, "Damping cannot be set to a negative value!");
ERR_FAIL_COND_MSG(p_damping > 1, "Damping cannot be more than one!");
damping = p_damping;
_update_jiggle_joint_data();
}
float SkeletonModification2DJiggle::get_damping() const {
return damping;
}
void SkeletonModification2DJiggle::set_use_gravity(bool p_use_gravity) {
use_gravity = p_use_gravity;
_update_jiggle_joint_data();
}
bool SkeletonModification2DJiggle::get_use_gravity() const {
return use_gravity;
}
void SkeletonModification2DJiggle::set_gravity(Vector2 p_gravity) {
gravity = p_gravity;
_update_jiggle_joint_data();
}
Vector2 SkeletonModification2DJiggle::get_gravity() const {
return gravity;
}
void SkeletonModification2DJiggle::set_use_colliders(bool p_use_colliders) {
use_colliders = p_use_colliders;
notify_property_list_changed();
}
bool SkeletonModification2DJiggle::get_use_colliders() const {
return use_colliders;
}
void SkeletonModification2DJiggle::set_collision_mask(int p_mask) {
collision_mask = p_mask;
}
int SkeletonModification2DJiggle::get_collision_mask() const {
return collision_mask;
}
// Jiggle joint data functions
int SkeletonModification2DJiggle::get_jiggle_data_chain_length() {
return jiggle_data_chain.size();
}
void SkeletonModification2DJiggle::set_jiggle_data_chain_length(int p_length) {
ERR_FAIL_COND(p_length < 0);
jiggle_data_chain.resize(p_length);
notify_property_list_changed();
}
void SkeletonModification2DJiggle::set_jiggle_joint_bone2d_node(int p_joint_idx, const NodePath &p_target_node) {
ERR_FAIL_INDEX_MSG(p_joint_idx, jiggle_data_chain.size(), "Jiggle joint out of range!");
jiggle_data_chain.write[p_joint_idx].bone2d_node = p_target_node;
jiggle_joint_update_bone2d_cache(p_joint_idx);
notify_property_list_changed();
}
NodePath SkeletonModification2DJiggle::get_jiggle_joint_bone2d_node(int p_joint_idx) const {
ERR_FAIL_INDEX_V_MSG(p_joint_idx, jiggle_data_chain.size(), NodePath(), "Jiggle joint out of range!");
return jiggle_data_chain[p_joint_idx].bone2d_node;
}
void SkeletonModification2DJiggle::set_jiggle_joint_bone_index(int p_joint_idx, int p_bone_idx) {
ERR_FAIL_INDEX_MSG(p_joint_idx, jiggle_data_chain.size(), "Jiggle joint out of range!");
ERR_FAIL_COND_MSG(p_bone_idx < 0, "Bone index is out of range: The index is too low!");
if (is_setup) {
if (stack->skeleton) {
ERR_FAIL_INDEX_MSG(p_bone_idx, stack->skeleton->get_bone_count(), "Passed-in Bone index is out of range!");
jiggle_data_chain.write[p_joint_idx].bone_idx = p_bone_idx;
jiggle_data_chain.write[p_joint_idx].bone2d_node_cache = stack->skeleton->get_bone(p_bone_idx)->get_instance_id();
jiggle_data_chain.write[p_joint_idx].bone2d_node = stack->skeleton->get_path_to(stack->skeleton->get_bone(p_bone_idx));
} else {
WARN_PRINT("Cannot verify the Jiggle joint " + itos(p_joint_idx) + " bone index for this modification...");
jiggle_data_chain.write[p_joint_idx].bone_idx = p_bone_idx;
}
} else {
WARN_PRINT("Cannot verify the Jiggle joint " + itos(p_joint_idx) + " bone index for this modification...");
jiggle_data_chain.write[p_joint_idx].bone_idx = p_bone_idx;
}
notify_property_list_changed();
}
int SkeletonModification2DJiggle::get_jiggle_joint_bone_index(int p_joint_idx) const {
ERR_FAIL_INDEX_V_MSG(p_joint_idx, jiggle_data_chain.size(), -1, "Jiggle joint out of range!");
return jiggle_data_chain[p_joint_idx].bone_idx;
}
void SkeletonModification2DJiggle::set_jiggle_joint_override(int p_joint_idx, bool p_override) {
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].override_defaults = p_override;
_update_jiggle_joint_data();
notify_property_list_changed();
}
bool SkeletonModification2DJiggle::get_jiggle_joint_override(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), false);
return jiggle_data_chain[p_joint_idx].override_defaults;
}
void SkeletonModification2DJiggle::set_jiggle_joint_stiffness(int p_joint_idx, float p_stiffness) {
ERR_FAIL_COND_MSG(p_stiffness < 0, "Stiffness cannot be set to a negative value!");
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].stiffness = p_stiffness;
}
float SkeletonModification2DJiggle::get_jiggle_joint_stiffness(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), -1);
return jiggle_data_chain[p_joint_idx].stiffness;
}
void SkeletonModification2DJiggle::set_jiggle_joint_mass(int p_joint_idx, float p_mass) {
ERR_FAIL_COND_MSG(p_mass < 0, "Mass cannot be set to a negative value!");
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].mass = p_mass;
}
float SkeletonModification2DJiggle::get_jiggle_joint_mass(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), -1);
return jiggle_data_chain[p_joint_idx].mass;
}
void SkeletonModification2DJiggle::set_jiggle_joint_damping(int p_joint_idx, float p_damping) {
ERR_FAIL_COND_MSG(p_damping < 0, "Damping cannot be set to a negative value!");
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].damping = p_damping;
}
float SkeletonModification2DJiggle::get_jiggle_joint_damping(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), -1);
return jiggle_data_chain[p_joint_idx].damping;
}
void SkeletonModification2DJiggle::set_jiggle_joint_use_gravity(int p_joint_idx, bool p_use_gravity) {
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].use_gravity = p_use_gravity;
notify_property_list_changed();
}
bool SkeletonModification2DJiggle::get_jiggle_joint_use_gravity(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), false);
return jiggle_data_chain[p_joint_idx].use_gravity;
}
void SkeletonModification2DJiggle::set_jiggle_joint_gravity(int p_joint_idx, Vector2 p_gravity) {
ERR_FAIL_INDEX(p_joint_idx, jiggle_data_chain.size());
jiggle_data_chain.write[p_joint_idx].gravity = p_gravity;
}
Vector2 SkeletonModification2DJiggle::get_jiggle_joint_gravity(int p_joint_idx) const {
ERR_FAIL_INDEX_V(p_joint_idx, jiggle_data_chain.size(), Vector2(0, 0));
return jiggle_data_chain[p_joint_idx].gravity;
}
void SkeletonModification2DJiggle::_bind_methods() {
ClassDB::bind_method(D_METHOD("set_target_node", "target_nodepath"), &SkeletonModification2DJiggle::set_target_node);
ClassDB::bind_method(D_METHOD("get_target_node"), &SkeletonModification2DJiggle::get_target_node);
ClassDB::bind_method(D_METHOD("set_jiggle_data_chain_length", "length"), &SkeletonModification2DJiggle::set_jiggle_data_chain_length);
ClassDB::bind_method(D_METHOD("get_jiggle_data_chain_length"), &SkeletonModification2DJiggle::get_jiggle_data_chain_length);
ClassDB::bind_method(D_METHOD("set_stiffness", "stiffness"), &SkeletonModification2DJiggle::set_stiffness);
ClassDB::bind_method(D_METHOD("get_stiffness"), &SkeletonModification2DJiggle::get_stiffness);
ClassDB::bind_method(D_METHOD("set_mass", "mass"), &SkeletonModification2DJiggle::set_mass);
ClassDB::bind_method(D_METHOD("get_mass"), &SkeletonModification2DJiggle::get_mass);
ClassDB::bind_method(D_METHOD("set_damping", "damping"), &SkeletonModification2DJiggle::set_damping);
ClassDB::bind_method(D_METHOD("get_damping"), &SkeletonModification2DJiggle::get_damping);
ClassDB::bind_method(D_METHOD("set_use_gravity", "use_gravity"), &SkeletonModification2DJiggle::set_use_gravity);
ClassDB::bind_method(D_METHOD("get_use_gravity"), &SkeletonModification2DJiggle::get_use_gravity);
ClassDB::bind_method(D_METHOD("set_gravity", "gravity"), &SkeletonModification2DJiggle::set_gravity);
ClassDB::bind_method(D_METHOD("get_gravity"), &SkeletonModification2DJiggle::get_gravity);
ClassDB::bind_method(D_METHOD("set_use_colliders", "use_colliders"), &SkeletonModification2DJiggle::set_use_colliders);
ClassDB::bind_method(D_METHOD("get_use_colliders"), &SkeletonModification2DJiggle::get_use_colliders);
ClassDB::bind_method(D_METHOD("set_collision_mask", "collision_mask"), &SkeletonModification2DJiggle::set_collision_mask);
ClassDB::bind_method(D_METHOD("get_collision_mask"), &SkeletonModification2DJiggle::get_collision_mask);
// Jiggle joint data functions
ClassDB::bind_method(D_METHOD("set_jiggle_joint_bone2d_node", "joint_idx", "bone2d_node"), &SkeletonModification2DJiggle::set_jiggle_joint_bone2d_node);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_bone2d_node", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_bone2d_node);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_bone_index", "joint_idx", "bone_idx"), &SkeletonModification2DJiggle::set_jiggle_joint_bone_index);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_bone_index", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_bone_index);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_override", "joint_idx", "override"), &SkeletonModification2DJiggle::set_jiggle_joint_override);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_override", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_override);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_stiffness", "joint_idx", "stiffness"), &SkeletonModification2DJiggle::set_jiggle_joint_stiffness);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_stiffness", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_stiffness);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_mass", "joint_idx", "mass"), &SkeletonModification2DJiggle::set_jiggle_joint_mass);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_mass", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_mass);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_damping", "joint_idx", "damping"), &SkeletonModification2DJiggle::set_jiggle_joint_damping);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_damping", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_damping);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_use_gravity", "joint_idx", "use_gravity"), &SkeletonModification2DJiggle::set_jiggle_joint_use_gravity);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_use_gravity", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_use_gravity);
ClassDB::bind_method(D_METHOD("set_jiggle_joint_gravity", "joint_idx", "gravity"), &SkeletonModification2DJiggle::set_jiggle_joint_gravity);
ClassDB::bind_method(D_METHOD("get_jiggle_joint_gravity", "joint_idx"), &SkeletonModification2DJiggle::get_jiggle_joint_gravity);
ADD_PROPERTY(PropertyInfo(Variant::NODE_PATH, "target_nodepath", PROPERTY_HINT_NODE_PATH_VALID_TYPES, "Node2D"), "set_target_node", "get_target_node");
ADD_PROPERTY(PropertyInfo(Variant::INT, "jiggle_data_chain_length", PROPERTY_HINT_RANGE, "0,100,1"), "set_jiggle_data_chain_length", "get_jiggle_data_chain_length");
ADD_GROUP("Default Joint Settings", "");
ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "stiffness"), "set_stiffness", "get_stiffness");
ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "mass"), "set_mass", "get_mass");
ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "damping", PROPERTY_HINT_RANGE, "0, 1, 0.01"), "set_damping", "get_damping");
ADD_PROPERTY(PropertyInfo(Variant::BOOL, "use_gravity"), "set_use_gravity", "get_use_gravity");
ADD_PROPERTY(PropertyInfo(Variant::VECTOR2, "gravity"), "set_gravity", "get_gravity");
ADD_GROUP("", "");
}
SkeletonModification2DJiggle::SkeletonModification2DJiggle() {
stack = nullptr;
is_setup = false;
jiggle_data_chain = Vector<Jiggle_Joint_Data2D>();
stiffness = 3;
mass = 0.75;
damping = 0.75;
use_gravity = false;
gravity = Vector2(0, 6.0);
enabled = true;
editor_draw_gizmo = false; // Nothing to really show in a gizmo right now.
}
SkeletonModification2DJiggle::~SkeletonModification2DJiggle() {
}