Tweens are mostly useful for animations requiring a numerical property to be interpolated over a range of values. The name [i]tween[/i] comes from [i]in-betweening[/i], an animation technique where you specify [i]keyframes[/i] and the computer interpolates the frames that appear between them.
[Tween] is more suited than [AnimationPlayer] for animations where you don't know the final values in advance. For example, interpolating a dynamically-chosen camera zoom value is best done with a [Tween]; it would be difficult to do the same thing with an [AnimationPlayer] node. Tweens are also more light-weight than [AnimationPlayer], so they are very much suited for simple animations or general tasks that don't require visual tweaking provided by the editor. They can be used in a fire-and-forget manner for some logic that normally would be done by code. You can e.g. make something shoot periodically by using a looped [CallbackTweener] with a delay.
A [Tween] can be created by using either [method SceneTree.create_tween] or [method Node.create_tween]. [Tween]s created manually (i.e. by using [code]Tween.new()[/code]) are invalid. They can't be used for tweening values, but you can do manual interpolation with [method interpolate_value].
A [Tween] animation is composed of a sequence of [Tweener]s, which by default are executed one after another. You can create a sequence by appending [Tweener]s to the [Tween]. Animating something with a [Tweener] is called tweening. Example tweening sequence looks like this:
This sequence will make the [code]$Sprite[/code] node turn red, then shrink and finally the [method Node.queue_free] is called to remove the sprite. See methods [method tween_property], [method tween_interval], [method tween_callback] and [method tween_method] for more usage information.
When a [Tweener] is created with one of the [code]tween_*[/code] methods, a chained method call can be used to tweak the properties of this [Tweener]. For example, if you want to set different transition type in the above example, you can do:
In the example above, all children of a node are moved one after another to position (0, 0).
Some [Tweener]s use transitions and eases. The first accepts an [enum TransitionType] constant, and refers to the way the timing of the animation is handled (see [url=https://easings.net/]easings.net[/url] for some examples). The second accepts an [enum EaseType] constant, and controls where the [code]trans_type[/code] is applied to the interpolation (in the beginning, the end, or both). If you don't know which transition and easing to pick, you can try different [enum TransitionType] constants with [constant EASE_IN_OUT], and use the one that looks best.
[b]Note:[/b] All [Tween]s will automatically start by default. To prevent a [Tween] from autostarting, you can call [method stop] immediately after it was created.
Binds this [Tween] with the given [code]node[/code]. [Tween]s are processed directly by the [SceneTree], so they run independently of the animated nodes. When you bind a [Node] with the [Tween], the [Tween] will halt the animation when the object is not inside tree and the [Tween] will be automatically killed when the bound object is freed. Also [constant TWEEN_PAUSE_BOUND] will make the pausing behavior dependent on the bound node.
For a shorter way to create and bind a [Tween], you can use [method Node.create_tween].
Processes the [Tween] by given [code]delta[/code] value, in seconds. Mostly useful when the [Tween] is paused, for controlling it manually. Can also be used to end the [Tween] animation immediately, by using [code]delta[/code] longer than the whole duration.
This method can be used for manual interpolation of a value, when you don't want [Tween] to do animating for you. It's similar to [method @GlobalScope.lerp], but with support for custom transition and easing.
[code]elapsed_time[/code] is the time in seconds that passed after the interping started and it's used to control the position of the interpolation. E.g. when it's equal to half of the [code]duration[/code], the interpolated value will be halfway between initial and final values. This value can also be greater than [code]duration[/code] or lower than 0, which will extrapolate the value.
[code]initial_value[/code] is the starting value of the interpolation.
[code]delta_value[/code] is the change of the value in the interpolation, i.e. it's equal to [code]final_value - initial_value[/code].
[code]duration[/code] is the total time of the interpolation.
Returns whether the [Tween] is valid. A valid [Tween] is a [Tween] contained by the scene tree (i.e. the array from [method SceneTree.get_processed_tweens] will contain this [Tween]). [Tween] might become invalid when it has finished tweening or was killed, also when created with [code]Tween.new()[/code]. Invalid [Tween] can't have [Tweener]s appended, because it can't animate them. You can however still use [method interpolate_value].
Sets the number of times the tweening sequence will be repeated, i.e. [code]set_loops(2)[/code] will run the animation twice.
Calling this method without arguments will make the [Tween] run infinitely, until it is either killed by [method kill] or by freeing bound node, or all the animated objects have been freed (which makes further animation impossible).
If [code]parallel[/code] is [code]true[/code], the [Tweener]s appended after this method will by default run simultanously, as opposed to sequentially.
Creates and appends a [CallbackTweener]. This method can be used to call an arbitrary method in any object. Use [method Callable.bind] to bind additional arguments for the call.
Example: object that keeps shooting every 1 second.
[codeblock]
var tween = get_tree().create_tween().set_loops()
tween.tween_callback(shoot).set_delay(1)
[/codeblock]
Example: turning a sprite red and then blue, with 2 second delay.
Creates and appends an [IntervalTweener]. This method can be used to create delays in the tween animation, as an alternative for using the delay in other [Tweener]s or when there's no animation (in which case the [Tween] acts as a timer). [code]time[/code] is the length of the interval, in seconds.
Example: creating an interval in code execution.
[codeblock]
#... some code
var tween = create_tween()
tween.tween_interval(2)
await tween.finished
#... more code
[/codeblock]
Example: creating an object that moves back and forth and jumps every few seconds.
Creates and appends a [MethodTweener]. This method is similar to a combination of [method tween_callback] and [method tween_property]. It calls a method over time with a tweened value provided as an argument. The value is tweened between [code]from[/code] and [code]to[/code] over the time specified by [code]duration[/code], in seconds. Use [method Callable.bind] to bind additional arguments for the call. You can use [method MethodTweener.set_ease] and [method MethodTweener.set_trans] to tweak the easing and transition of the value or [method MethodTweener.set_delay] to delay the tweening.
Example: making a 3D object look from one point to another point.
[codeblock]
var tween = create_tween()
tween.tween_method(look_at.bind(Vector3.UP), Vector3(-1, 0, -1), Vector3(1, 0, -1), 1) #the look_at() method takes up vector as second argument
[/codeblock]
Example: setting a text of a [Label], using an intermediate method and after a delay.
Creates and appends a [PropertyTweener]. This method tweens a [code]property[/code] of an [code]object[/code] between an initial value and [code]final_val[/code] in a span of time equal to [code]duration[/code], in seconds. The initial value by default is a value at the time the tweening of the [PropertyTweener] start. For example:
will move the sprite to position (100, 200) and then to (200, 300). If you use [method PropertyTweener.from] or [method PropertyTweener.from_current], the starting position will be overwritten by the given value instead. See other methods in [PropertyTweener] to see how the tweening can be tweaked further.
[b]Note:[/b] You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using [code]"property:component"[/code] (eg. [code]position:x[/code]), where it would only apply to that particular component.
Example: moving object twice from the same position, with different transition types.
Emitted when the [Tween] has finished all tweening. Never emitted when the [Tween] is set to infinite looping (see [method set_loops]).
[b]Note:[/b] The [Tween] is removed (invalidated) after this signal is emitted, but it doesn't happen immediately, but on the next processing frame. Calling [method stop] inside the signal callback will preserve the [Tween].
Emitted when a full loop is complete (see [method set_loops]), providing the loop index. This signal is not emitted after final loop, use [signal finished] instead for this case.
Emitted when one step of the [Tween] is complete, providing the step index. One step is either a single [Tweener] or a group of [Tweener]s running parallelly.
