virtualx-engine/doc/classes/Curve.xml

<?xml version="1.0" encoding="UTF-8" ?>
<class name="Curve" inherits="Resource" category="Core" version="3.2">
	<brief_description>
		A mathematic curve.
	</brief_description>
	<description>
		A curve that can be saved and re-used for other objects. By default it ranges between [code]0[/code] and [code]1[/code] on the y-axis and positions points relative to the [code]0.5[/code] y-position.
	</description>
	<tutorials>
	</tutorials>
	<demos>
	</demos>
	<methods>
		<method name="add_point">
			<return type="int">
			</return>
			<argument index="0" name="position" type="Vector2">
			</argument>
			<argument index="1" name="left_tangent" type="float" default="0">
			</argument>
			<argument index="2" name="right_tangent" type="float" default="0">
			</argument>
			<argument index="3" name="left_mode" type="int" enum="Curve.TangentMode" default="0">
			</argument>
			<argument index="4" name="right_mode" type="int" enum="Curve.TangentMode" default="0">
			</argument>
			<description>
				Adds a point to the curve. For each side, if the [code]*_mode[/code] is [code]TANGENT_LINEAR[/code], the [code]*_tangent[/code] angle (in degrees) uses the slope of the curve halfway to the adjacent point. Allows custom assignments to the [code]*_tangent[/code] angle if [code]*_mode[/code] is set to [code]TANGENT_FREE[/code].
			</description>
		</method>
		<method name="bake">
			<return type="void">
			</return>
			<description>
				Recomputes the baked cache of points for the curve.
			</description>
		</method>
		<method name="clean_dupes">
			<return type="void">
			</return>
			<description>
				Removes points that are closer than [code]CMP_EPSILON[/code] (0.00001) units to their neighbor on the curve.
			</description>
		</method>
		<method name="clear_points">
			<return type="void">
			</return>
			<description>
				Removes all points from the curve.
			</description>
		</method>
		<method name="get_point_count" qualifiers="const">
			<return type="int">
			</return>
			<description>
				Returns the number of points describing the curve.
			</description>
		</method>
		<method name="get_point_left_mode" qualifiers="const">
			<return type="int" enum="Curve.TangentMode">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Returns the left [code]TangentMode[/code] for the point at [code]index[/code].
			</description>
		</method>
		<method name="get_point_left_tangent" qualifiers="const">
			<return type="float">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Returns the left tangent angle (in degrees) for the point at [code]index[/code].
			</description>
		</method>
		<method name="get_point_position" qualifiers="const">
			<return type="Vector2">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Returns the curve coordinates for the point at [code]index[/code].
			</description>
		</method>
		<method name="get_point_right_mode" qualifiers="const">
			<return type="int" enum="Curve.TangentMode">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Returns the right [code]TangentMode[/code] for the point at [code]index[/code].
			</description>
		</method>
		<method name="get_point_right_tangent" qualifiers="const">
			<return type="float">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Returns the right tangent angle (in degrees) for the point at [code]index[/code].
			</description>
		</method>
		<method name="interpolate" qualifiers="const">
			<return type="float">
			</return>
			<argument index="0" name="offset" type="float">
			</argument>
			<description>
				Returns the y value for the point that would exist at x-position [code]offset[/code] along the curve.
			</description>
		</method>
		<method name="interpolate_baked">
			<return type="float">
			</return>
			<argument index="0" name="offset" type="float">
			</argument>
			<description>
				Returns the y value for the point that would exist at x-position [code]offset[/code] along the curve using the baked cache. Bakes the curve's points if not already baked.
			</description>
		</method>
		<method name="remove_point">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<description>
				Removes the point at [code]index[/code] from the curve.
			</description>
		</method>
		<method name="set_point_left_mode">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="mode" type="int" enum="Curve.TangentMode">
			</argument>
			<description>
				Sets the left [code]TangentMode[/code] for the point at [code]index[/code] to [code]mode[/code].
			</description>
		</method>
		<method name="set_point_left_tangent">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="tangent" type="float">
			</argument>
			<description>
				Sets the left tangent angle for the point at [code]index[/code] to [code]tangent[/code].
			</description>
		</method>
		<method name="set_point_offset">
			<return type="int">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="offset" type="float">
			</argument>
			<description>
				Sets the offset from [code]0.5[/code]
			</description>
		</method>
		<method name="set_point_right_mode">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="mode" type="int" enum="Curve.TangentMode">
			</argument>
			<description>
				Sets the right [code]TangentMode[/code] for the point at [code]index[/code] to [code]mode[/code].
			</description>
		</method>
		<method name="set_point_right_tangent">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="tangent" type="float">
			</argument>
			<description>
				Sets the right tangent angle for the point at [code]index[/code] to [code]tangent[/code].
			</description>
		</method>
		<method name="set_point_value">
			<return type="void">
			</return>
			<argument index="0" name="index" type="int">
			</argument>
			<argument index="1" name="y" type="float">
			</argument>
			<description>
				Assigns the vertical position [code]y[/code] to the point at [code]index[/code].
			</description>
		</method>
	</methods>
	<members>
		<member name="bake_resolution" type="int" setter="set_bake_resolution" getter="get_bake_resolution">
			The number of points to include in the baked (i.e. cached) curve data.
		</member>
		<member name="max_value" type="float" setter="set_max_value" getter="get_max_value">
			The maximum value the curve can reach. Default value: [code]1[/code].
		</member>
		<member name="min_value" type="float" setter="set_min_value" getter="get_min_value">
			The minimum value the curve can reach. Default value: [code]0[/code].
		</member>
	</members>
	<signals>
		<signal name="range_changed">
			<description>
				Emitted when [member max_value] or [member min_value] is changed.
			</description>
		</signal>
	</signals>
	<constants>
		<constant name="TANGENT_FREE" value="0" enum="TangentMode">
			The tangent on this side of the point is user-defined.
		</constant>
		<constant name="TANGENT_LINEAR" value="1" enum="TangentMode">
			The curve calculates the tangent on this side of the point as the slope halfway towards the adjacent point.
		</constant>
		<constant name="TANGENT_MODE_COUNT" value="2" enum="TangentMode">
			The total number of available tangent modes.
		</constant>
	</constants>
</class>