virtualx-engine/thirdparty/bullet/Bullet3Dynamics/ConstraintSolver/b3JacobianEntry.h

/*
Bullet Continuous Collision Detection and Physics Library
Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/

This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, 
including commercial applications, and to alter it and redistribute it freely, 
subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/

#ifndef B3_JACOBIAN_ENTRY_H
#define B3_JACOBIAN_ENTRY_H

#include "Bullet3Common/b3Matrix3x3.h"


//notes:
// Another memory optimization would be to store m_1MinvJt in the remaining 3 w components
// which makes the b3JacobianEntry memory layout 16 bytes
// if you only are interested in angular part, just feed massInvA and massInvB zero

/// Jacobian entry is an abstraction that allows to describe constraints
/// it can be used in combination with a constraint solver
/// Can be used to relate the effect of an impulse to the constraint error
B3_ATTRIBUTE_ALIGNED16(class) b3JacobianEntry
{
public:
	b3JacobianEntry() {};
	//constraint between two different rigidbodies
	b3JacobianEntry(
		const b3Matrix3x3& world2A,
		const b3Matrix3x3& world2B,
		const b3Vector3& rel_pos1,const b3Vector3& rel_pos2,
		const b3Vector3& jointAxis,
		const b3Vector3& inertiaInvA, 
		const b3Scalar massInvA,
		const b3Vector3& inertiaInvB,
		const b3Scalar massInvB)
		:m_linearJointAxis(jointAxis)
	{
		m_aJ = world2A*(rel_pos1.cross(m_linearJointAxis));
		m_bJ = world2B*(rel_pos2.cross(-m_linearJointAxis));
		m_0MinvJt	= inertiaInvA * m_aJ;
		m_1MinvJt = inertiaInvB * m_bJ;
		m_Adiag = massInvA + m_0MinvJt.dot(m_aJ) + massInvB + m_1MinvJt.dot(m_bJ);

		b3Assert(m_Adiag > b3Scalar(0.0));
	}

	//angular constraint between two different rigidbodies
	b3JacobianEntry(const b3Vector3& jointAxis,
		const b3Matrix3x3& world2A,
		const b3Matrix3x3& world2B,
		const b3Vector3& inertiaInvA,
		const b3Vector3& inertiaInvB)
		:m_linearJointAxis(b3MakeVector3(b3Scalar(0.),b3Scalar(0.),b3Scalar(0.)))
	{
		m_aJ= world2A*jointAxis;
		m_bJ = world2B*-jointAxis;
		m_0MinvJt	= inertiaInvA * m_aJ;
		m_1MinvJt = inertiaInvB * m_bJ;
		m_Adiag =  m_0MinvJt.dot(m_aJ) + m_1MinvJt.dot(m_bJ);

		b3Assert(m_Adiag > b3Scalar(0.0));
	}

	//angular constraint between two different rigidbodies
	b3JacobianEntry(const b3Vector3& axisInA,
		const b3Vector3& axisInB,
		const b3Vector3& inertiaInvA,
		const b3Vector3& inertiaInvB)
		: m_linearJointAxis(b3MakeVector3(b3Scalar(0.),b3Scalar(0.),b3Scalar(0.)))
		, m_aJ(axisInA)
		, m_bJ(-axisInB)
	{
		m_0MinvJt	= inertiaInvA * m_aJ;
		m_1MinvJt = inertiaInvB * m_bJ;
		m_Adiag =  m_0MinvJt.dot(m_aJ) + m_1MinvJt.dot(m_bJ);

		b3Assert(m_Adiag > b3Scalar(0.0));
	}

	//constraint on one rigidbody
	b3JacobianEntry(
		const b3Matrix3x3& world2A,
		const b3Vector3& rel_pos1,const b3Vector3& rel_pos2,
		const b3Vector3& jointAxis,
		const b3Vector3& inertiaInvA, 
		const b3Scalar massInvA)
		:m_linearJointAxis(jointAxis)
	{
		m_aJ= world2A*(rel_pos1.cross(jointAxis));
		m_bJ = world2A*(rel_pos2.cross(-jointAxis));
		m_0MinvJt	= inertiaInvA * m_aJ;
		m_1MinvJt = b3MakeVector3(b3Scalar(0.),b3Scalar(0.),b3Scalar(0.));
		m_Adiag = massInvA + m_0MinvJt.dot(m_aJ);

		b3Assert(m_Adiag > b3Scalar(0.0));
	}

	b3Scalar	getDiagonal() const { return m_Adiag; }

	// for two constraints on the same rigidbody (for example vehicle friction)
	b3Scalar	getNonDiagonal(const b3JacobianEntry& jacB, const b3Scalar massInvA) const
	{
		const b3JacobianEntry& jacA = *this;
		b3Scalar lin = massInvA * jacA.m_linearJointAxis.dot(jacB.m_linearJointAxis);
		b3Scalar ang = jacA.m_0MinvJt.dot(jacB.m_aJ);
		return lin + ang;
	}

	

	// for two constraints on sharing two same rigidbodies (for example two contact points between two rigidbodies)
	b3Scalar	getNonDiagonal(const b3JacobianEntry& jacB,const b3Scalar massInvA,const b3Scalar massInvB) const
	{
		const b3JacobianEntry& jacA = *this;
		b3Vector3 lin = jacA.m_linearJointAxis * jacB.m_linearJointAxis;
		b3Vector3 ang0 = jacA.m_0MinvJt * jacB.m_aJ;
		b3Vector3 ang1 = jacA.m_1MinvJt * jacB.m_bJ;
		b3Vector3 lin0 = massInvA * lin ;
		b3Vector3 lin1 = massInvB * lin;
		b3Vector3 sum = ang0+ang1+lin0+lin1;
		return sum[0]+sum[1]+sum[2];
	}

	b3Scalar getRelativeVelocity(const b3Vector3& linvelA,const b3Vector3& angvelA,const b3Vector3& linvelB,const b3Vector3& angvelB)
	{
		b3Vector3 linrel = linvelA - linvelB;
		b3Vector3 angvela  = angvelA * m_aJ;
		b3Vector3 angvelb  = angvelB * m_bJ;
		linrel *= m_linearJointAxis;
		angvela += angvelb;
		angvela += linrel;
		b3Scalar rel_vel2 = angvela[0]+angvela[1]+angvela[2];
		return rel_vel2 + B3_EPSILON;
	}
//private:

	b3Vector3	m_linearJointAxis;
	b3Vector3	m_aJ;
	b3Vector3	m_bJ;
	b3Vector3	m_0MinvJt;
	b3Vector3	m_1MinvJt;
	//Optimization: can be stored in the w/last component of one of the vectors
	b3Scalar	m_Adiag;

};

#endif //B3_JACOBIAN_ENTRY_H