diff --git a/thirdparty/README.md b/thirdparty/README.md index 2ab0aedf1c4..58d979cccad 100644 --- a/thirdparty/README.md +++ b/thirdparty/README.md @@ -496,15 +496,13 @@ File extracted from upstream release tarball: ## xatlas - Upstream: https://github.com/jpcy/xatlas -- Version: git (b4b5426, 2019) +- Version: git (e12ea82, 2019) - License: MIT Files extracted from upstream source: - `xatlas.{cpp,h}` - -Note: License is marked as Public Domain in the files, but it was -later clarified upstream to MIT license. +- `LICENSE` ## zlib diff --git a/thirdparty/xatlas/LICENSE b/thirdparty/xatlas/LICENSE index 94d0c60485e..9e61e15fb7c 100644 --- a/thirdparty/xatlas/LICENSE +++ b/thirdparty/xatlas/LICENSE @@ -1,14 +1,21 @@ -xatlas -https://github.com/jpcy/xatlas -Copyright (c) 2018 Jonathan Young +MIT License -thekla_atlas -https://github.com/Thekla/thekla_atlas -Copyright (c) 2013 Thekla, Inc -Copyright NVIDIA Corporation 2006 -- Ignacio Castano +Copyright (c) 2018-2019 Jonathan Young -Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: -The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. \ No newline at end of file diff --git a/thirdparty/xatlas/xatlas.cpp b/thirdparty/xatlas/xatlas.cpp index 56794211a6c..80cacf97466 100644 --- a/thirdparty/xatlas/xatlas.cpp +++ b/thirdparty/xatlas/xatlas.cpp @@ -33,7 +33,6 @@ https://github.com/brandonpelfrey/Fast-BVH MIT License Copyright (c) 2012 Brandon Pelfrey */ -#include #include #include #include @@ -114,22 +113,25 @@ Copyright (c) 2012 Brandon Pelfrey #define XA_UNUSED(a) ((void)(a)) -#define XA_GROW_CHARTS_COPLANAR 1 #define XA_MERGE_CHARTS 1 #define XA_MERGE_CHARTS_MIN_NORMAL_DEVIATION 0.5f #define XA_RECOMPUTE_CHARTS 1 -#define XA_SKIP_PARAMETERIZATION 0 // Use the orthogonal parameterization from segment::Atlas #define XA_CLOSE_HOLES_CHECK_EDGE_INTERSECTION 0 +#define XA_FIX_INTERNAL_BOUNDARY_LOOPS 1 +#define XA_PRINT_CHART_WARNINGS 0 #define XA_DEBUG_HEAP 0 #define XA_DEBUG_SINGLE_CHART 0 #define XA_DEBUG_EXPORT_ATLAS_IMAGES 0 +#define XA_DEBUG_EXPORT_ATLAS_IMAGES_PER_CHART 0 // Export an atlas image after each chart is added. +#define XA_DEBUG_EXPORT_BOUNDARY_GRID 0 +#define XA_DEBUG_EXPORT_TGA (XA_DEBUG_EXPORT_ATLAS_IMAGES || XA_DEBUG_EXPORT_BOUNDARY_GRID) #define XA_DEBUG_EXPORT_OBJ_SOURCE_MESHES 0 #define XA_DEBUG_EXPORT_OBJ_CHART_GROUPS 0 +#define XA_DEBUG_EXPORT_OBJ_PLANAR_REGIONS 0 #define XA_DEBUG_EXPORT_OBJ_CHARTS 0 #define XA_DEBUG_EXPORT_OBJ_BEFORE_FIX_TJUNCTION 0 #define XA_DEBUG_EXPORT_OBJ_CLOSE_HOLES_ERROR 0 -#define XA_DEBUG_EXPORT_OBJ_NOT_DISK 0 #define XA_DEBUG_EXPORT_OBJ_CHARTS_AFTER_PARAMETERIZATION 0 #define XA_DEBUG_EXPORT_OBJ_INVALID_PARAMETERIZATION 0 #define XA_DEBUG_EXPORT_OBJ_RECOMPUTED_CHARTS 0 @@ -137,10 +139,10 @@ Copyright (c) 2012 Brandon Pelfrey #define XA_DEBUG_EXPORT_OBJ (0 \ || XA_DEBUG_EXPORT_OBJ_SOURCE_MESHES \ || XA_DEBUG_EXPORT_OBJ_CHART_GROUPS \ + || XA_DEBUG_EXPORT_OBJ_PLANAR_REGIONS \ || XA_DEBUG_EXPORT_OBJ_CHARTS \ || XA_DEBUG_EXPORT_OBJ_BEFORE_FIX_TJUNCTION \ || XA_DEBUG_EXPORT_OBJ_CLOSE_HOLES_ERROR \ - || XA_DEBUG_EXPORT_OBJ_NOT_DISK \ || XA_DEBUG_EXPORT_OBJ_CHARTS_AFTER_PARAMETERIZATION \ || XA_DEBUG_EXPORT_OBJ_INVALID_PARAMETERIZATION \ || XA_DEBUG_EXPORT_OBJ_RECOMPUTED_CHARTS) @@ -166,6 +168,10 @@ struct MemTag enum { Default, + BitImage, + BVH, + FullVector, + Matrix, Mesh, MeshBoundaries, MeshColocals, @@ -174,6 +180,10 @@ struct MemTag MeshNormals, MeshPositions, MeshTexcoords, + SegmentAtlasChartCandidates, + SegmentAtlasChartFaces, + SegmentAtlasMeshData, + SegmentAtlasPlanarRegions, Count }; }; @@ -192,7 +202,7 @@ struct AllocHeader static std::mutex s_allocMutex; static AllocHeader *s_allocRoot = nullptr; -static size_t s_allocTotalSize = 0, s_allocPeakSize = 0, s_allocTotalTagSize[MemTag::Count] = { 0 }, s_allocPeakTagSize[MemTag::Count] = { 0 }; +static size_t s_allocTotalCount = 0, s_allocTotalSize = 0, s_allocPeakSize = 0, s_allocCount[MemTag::Count] = { 0 }, s_allocTotalTagSize[MemTag::Count] = { 0 }, s_allocPeakTagSize[MemTag::Count] = { 0 }; static uint32_t s_allocId =0 ; static constexpr uint32_t kAllocRedzone = 0x12345678; @@ -245,9 +255,11 @@ static void *Realloc(void *ptr, size_t size, int tag, const char *file, int line s_allocRoot = header; header->next->prev = header; } + s_allocTotalCount++; s_allocTotalSize += size; if (s_allocTotalSize > s_allocPeakSize) s_allocPeakSize = s_allocTotalSize; + s_allocCount[tag]++; s_allocTotalTagSize[tag] += size; if (s_allocTotalTagSize[tag] > s_allocPeakTagSize[tag]) s_allocPeakTagSize[tag] = s_allocTotalTagSize[tag]; @@ -287,9 +299,14 @@ static void ReportLeaks() static void PrintMemoryUsage() { + XA_PRINT("Total allocations: %zu\n", s_allocTotalCount); XA_PRINT("Memory usage: %0.2fMB current, %0.2fMB peak\n", internal::s_allocTotalSize / 1024.0f / 1024.0f, internal::s_allocPeakSize / 1024.0f / 1024.0f); static const char *labels[] = { // Sync with MemTag "Default", + "BitImage", + "BVH", + "FullVector", + "Matrix", "Mesh", "MeshBoundaries", "MeshColocals", @@ -297,10 +314,14 @@ static void PrintMemoryUsage() "MeshIndices", "MeshNormals", "MeshPositions", - "MeshTexcoords" + "MeshTexcoords", + "SegmentAtlasChartCandidates", + "SegmentAtlasChartFaces", + "SegmentAtlasMeshData", + "SegmentAtlasPlanarRegions" }; for (int i = 0; i < MemTag::Count; i++) { - XA_PRINT(" %s: %0.2fMB current, %0.2fMB peak\n", labels[i], internal::s_allocTotalTagSize[i] / 1024.0f / 1024.0f, internal::s_allocPeakTagSize[i] / 1024.0f / 1024.0f); + XA_PRINT(" %s: %zu allocations, %0.2fMB current, %0.2fMB peak\n", labels[i], internal::s_allocCount[i], internal::s_allocTotalTagSize[i] / 1024.0f / 1024.0f, internal::s_allocPeakTagSize[i] / 1024.0f / 1024.0f); } } @@ -308,7 +329,9 @@ static void PrintMemoryUsage() #else static void *Realloc(void *ptr, size_t size, int /*tag*/, const char * /*file*/, int /*line*/) { - if (ptr && size == 0 && s_free) { + if (size == 0 && !ptr) + return nullptr; + if (size == 0 && s_free) { s_free(ptr); return nullptr; } @@ -333,7 +356,6 @@ struct ProfileData std::atomic addMeshThread; std::atomic addMeshCreateColocals; std::atomic addMeshCreateFaceGroups; - std::atomic addMeshCreateBoundaries; std::atomic addMeshCreateChartGroupsReal; std::atomic addMeshCreateChartGroupsThread; clock_t computeChartsReal; @@ -362,7 +384,6 @@ struct ProfileData clock_t packChartsRasterize; clock_t packChartsDilate; clock_t packChartsFindLocation; - std::atomic packChartsFindLocationThread; clock_t packChartsBlit; clock_t buildOutputMeshes; }; @@ -386,6 +407,7 @@ static double clockToSeconds(clock_t c) static constexpr float kPi = 3.14159265358979323846f; static constexpr float kPi2 = 6.28318530717958647692f; +static constexpr float kPi4 = 12.56637061435917295384f; static constexpr float kEpsilon = 0.0001f; static constexpr float kAreaEpsilon = FLT_EPSILON; static constexpr float kNormalEpsilon = 0.001f; @@ -430,11 +452,9 @@ static T clamp(const T &x, const T &a, const T &b) template static void swap(T &a, T &b) { - T temp; - temp = a; + T temp = a; a = b; b = temp; - temp = T(); } union FloatUint32 @@ -620,6 +640,14 @@ static Vector2 normalize(const Vector2 &v, float epsilon) return n; } +static Vector2 normalizeSafe(const Vector2 &v, const Vector2 &fallback, float epsilon) +{ + float l = length(v); + if (isZero(l, epsilon)) + return fallback; + return v * (1.0f / l); +} + static bool equal(const Vector2 &v1, const Vector2 &v2, float epsilon) { return equal(v1.x, v2.x, epsilon) && equal(v1.y, v2.y, epsilon); @@ -640,23 +668,19 @@ static bool isFinite(const Vector2 &v) return isFinite(v.x) && isFinite(v.y); } -// Note, this is the area scaled by 2! -static float triangleArea(const Vector2 &v0, const Vector2 &v1) -{ - return (v0.x * v1.y - v0.y * v1.x); // * 0.5f; -} - static float triangleArea(const Vector2 &a, const Vector2 &b, const Vector2 &c) { // IC: While it may be appealing to use the following expression: - //return (c.x * a.y + a.x * b.y + b.x * c.y - b.x * a.y - c.x * b.y - a.x * c.y); // * 0.5f; + //return (c.x * a.y + a.x * b.y + b.x * c.y - b.x * a.y - c.x * b.y - a.x * c.y) * 0.5f; // That's actually a terrible idea. Small triangles far from the origin can end up producing fairly large floating point // numbers and the results becomes very unstable and dependent on the order of the factors. // Instead, it's preferable to subtract the vertices first, and multiply the resulting small values together. The result // in this case is always much more accurate (as long as the triangle is small) and less dependent of the location of // the triangle. - //return ((a.x - c.x) * (b.y - c.y) - (a.y - c.y) * (b.x - c.x)); // * 0.5f; - return triangleArea(a - c, b - c); + //return ((a.x - c.x) * (b.y - c.y) - (a.y - c.y) * (b.x - c.x)) * 0.5f; + const Vector2 v0 = a - c; + const Vector2 v1 = b - c; + return (v0.x * v1.y - v0.y * v1.x) * 0.5f; } static bool linesIntersect(const Vector2 &a1, const Vector2 &a2, const Vector2 &b1, const Vector2 &b2, float epsilon) @@ -746,11 +770,6 @@ public: float x, y, z; }; -static bool operator!=(const Vector3 &a, const Vector3 &b) -{ - return a.x != b.x || a.y != b.y || a.z != b.z; -} - static Vector3 operator+(const Vector3 &a, const Vector3 &b) { return Vector3(a.x + b.x, a.y + b.y, a.z + b.z); @@ -837,6 +856,33 @@ bool isFinite(const Vector3 &v) } #endif +struct Extents2 +{ + Vector2 min, max; + + void reset() + { + min.x = min.y = FLT_MAX; + max.x = max.y = -FLT_MAX; + } + + void add(Vector2 p) + { + min = xatlas::internal::min(min, p); + max = xatlas::internal::max(max, p); + } + + Vector2 midpoint() const + { + return Vector2(min.x + (max.x - min.x) * 0.5f, min.y + (max.y - min.y) * 0.5f); + } + + static bool intersect(Extents2 e1, Extents2 e2) + { + return e1.min.x <= e2.max.x && e1.max.x >= e2.min.x && e1.min.y <= e2.max.y && e1.max.y >= e2.min.y; + } +}; + struct Plane { Plane() = default; @@ -979,7 +1025,14 @@ struct AABB struct ArrayBase { - ArrayBase(uint32_t elementSize, int memTag = MemTag::Default) : buffer(nullptr), elementSize(elementSize), size(0), capacity(0), memTag(memTag) {} + ArrayBase(uint32_t elementSize, int memTag = MemTag::Default) : buffer(nullptr), elementSize(elementSize), size(0), capacity(0) + { +#if XA_DEBUG_HEAP + this->memTag = memTag; +#else + XA_UNUSED(memTag); +#endif + } ~ArrayBase() { @@ -991,6 +1044,12 @@ struct ArrayBase size = 0; } + void copyFrom(const uint8_t *data, uint32_t length) + { + resize(length, true); + memcpy(buffer, data, length * elementSize); + } + void copyTo(ArrayBase &other) const { XA_DEBUG_ASSERT(elementSize == other.elementSize); @@ -1025,7 +1084,9 @@ struct ArrayBase other.elementSize = elementSize; other.size = size; other.capacity = capacity; +#if XA_DEBUG_HEAP other.memTag = memTag; +#endif buffer = nullptr; elementSize = size = capacity = 0; } @@ -1043,6 +1104,16 @@ struct ArrayBase memcpy(&buffer[(size - 1) * elementSize], value, elementSize); } + void push_back(const ArrayBase &other) + { + XA_DEBUG_ASSERT(elementSize == other.elementSize); + if (other.size == 0) + return; + const uint32_t oldSize = size; + resize(size + other.size, false); + memcpy(buffer + oldSize * elementSize, other.buffer, other.size * other.elementSize); + } + // Remove the element at the given index. This is an expensive operation! void removeAt(uint32_t index) { @@ -1083,16 +1154,29 @@ struct ArrayBase } } else { // realloc the buffer +#if XA_DEBUG_HEAP buffer = XA_REALLOC_SIZE(memTag, buffer, newCapacity * elementSize); +#else + buffer = XA_REALLOC_SIZE(MemTag::Default, buffer, newCapacity * elementSize); +#endif } capacity = newCapacity; } +#if XA_DEBUG_HEAP + void setMemTag(int memTag) + { + this->memTag = memTag; + } +#endif + uint8_t *buffer; uint32_t elementSize; uint32_t size; uint32_t capacity; +#if XA_DEBUG_HEAP int memTag; +#endif }; template @@ -1101,7 +1185,7 @@ class Array public: Array(int memTag = MemTag::Default) : m_base(sizeof(T), memTag) {} Array(const Array&) = delete; - const Array &operator=(const Array &) = delete; + Array &operator=(const Array &) = delete; XA_INLINE const T &operator[](uint32_t index) const { @@ -1123,6 +1207,17 @@ public: XA_INLINE T *begin() { return (T *)m_base.buffer; } XA_INLINE void clear() { m_base.clear(); } + + bool contains(const T &value) const + { + for (uint32_t i = 0; i < m_base.size; i++) { + if (((const T *)m_base.buffer)[i] == value) + return true; + } + return false; + } + + void copyFrom(const T *data, uint32_t length) { m_base.copyFrom((const uint8_t *)data, length); } void copyTo(Array &other) const { m_base.copyTo(other.m_base); } XA_INLINE const T *data() const { return (const T *)m_base.buffer; } XA_INLINE T *data() { return (T *)m_base.buffer; } @@ -1131,11 +1226,24 @@ public: void insertAt(uint32_t index, const T &value) { m_base.insertAt(index, (const uint8_t *)&value); } void moveTo(Array &other) { m_base.moveTo(other.m_base); } void push_back(const T &value) { m_base.push_back((const uint8_t *)&value); } + void push_back(const Array &other) { m_base.push_back(other.m_base); } void pop_back() { m_base.pop_back(); } void removeAt(uint32_t index) { m_base.removeAt(index); } void reserve(uint32_t desiredSize) { m_base.reserve(desiredSize); } void resize(uint32_t newSize) { m_base.resize(newSize, true); } + void runCtors() + { + for (uint32_t i = 0; i < m_base.size; i++) + new (&((T *)m_base.buffer)[i]) T; + } + + void runDtors() + { + for (uint32_t i = 0; i < m_base.size; i++) + ((T *)m_base.buffer)[i].~T(); + } + void setAll(const T &value) { auto buffer = (T *)m_base.buffer; @@ -1143,6 +1251,10 @@ public: buffer[i] = value; } +#if XA_DEBUG_HEAP + void setMemTag(int memTag) { m_base.setMemTag(memTag); } +#endif + XA_INLINE uint32_t size() const { return m_base.size; } XA_INLINE void zeroOutMemory() { memset(m_base.buffer, 0, m_base.elementSize * m_base.size); } @@ -1150,6 +1262,28 @@ private: ArrayBase m_base; }; +template +struct ArrayView +{ + ArrayView(Array &a) : data(a.data()), length(a.size()) {} + ArrayView(T *data, uint32_t length) : data(data), length(length) {} + ArrayView &operator=(Array &a) { data = a.data(); length = a.size(); return *this; } + XA_INLINE const T &operator[](uint32_t index) const { XA_DEBUG_ASSERT(index < length); return data[index]; } + T *data; + uint32_t length; +}; + +template +struct ConstArrayView +{ + ConstArrayView(const Array &a) : data(a.data()), length(a.size()) {} + ConstArrayView(const T *data, uint32_t length) : data(data), length(length) {} + ConstArrayView &operator=(const Array &a) { data = a.data(); length = a.size(); return *this; } + XA_INLINE const T &operator[](uint32_t index) const { XA_DEBUG_ASSERT(index < length); return data[index]; } + const T *data; + uint32_t length; +}; + /// Basis class to compute tangent space basis, ortogonalizations and to transform vectors from one space to another. struct Basis { @@ -1197,40 +1331,34 @@ public: m_wordArray.resize((m_size + 31) >> 5); } - /// Get bit. - bool bitAt(uint32_t b) const + bool get(uint32_t index) const { - XA_DEBUG_ASSERT( b < m_size ); - return (m_wordArray[b >> 5] & (1 << (b & 31))) != 0; + XA_DEBUG_ASSERT(index < m_size); + return (m_wordArray[index >> 5] & (1 << (index & 31))) != 0; } - // Set a bit. - void setBitAt(uint32_t idx) + void set(uint32_t index) { - XA_DEBUG_ASSERT(idx < m_size); - m_wordArray[idx >> 5] |= (1 << (idx & 31)); + XA_DEBUG_ASSERT(index < m_size); + m_wordArray[index >> 5] |= (1 << (index & 31)); } - // Clear all the bits. - void clearAll() + void zeroOutMemory() { - memset(m_wordArray.data(), 0, m_wordArray.size() * sizeof(uint32_t)); + m_wordArray.zeroOutMemory(); } private: - // Number of bits stored. - uint32_t m_size; - - // Array of bits. + uint32_t m_size; // Number of bits stored. Array m_wordArray; }; class BitImage { public: - BitImage() : m_width(0), m_height(0), m_rowStride(0) {} + BitImage() : m_width(0), m_height(0), m_rowStride(0), m_data(MemTag::BitImage) {} - BitImage(uint32_t w, uint32_t h) : m_width(w), m_height(h) + BitImage(uint32_t w, uint32_t h) : m_width(w), m_height(h), m_data(MemTag::BitImage) { m_rowStride = (m_width + 63) >> 6; m_data.resize(m_rowStride * m_height); @@ -1238,7 +1366,7 @@ public: } BitImage(const BitImage &other) = delete; - const BitImage &operator=(const BitImage &other) = delete; + BitImage &operator=(const BitImage &other) = delete; uint32_t width() const { return m_width; } uint32_t height() const { return m_height; } @@ -1275,22 +1403,22 @@ public: m_rowStride = rowStride; } - bool bitAt(uint32_t x, uint32_t y) const + bool get(uint32_t x, uint32_t y) const { XA_DEBUG_ASSERT(x < m_width && y < m_height); const uint32_t index = (x >> 6) + y * m_rowStride; return (m_data[index] & (UINT64_C(1) << (uint64_t(x) & UINT64_C(63)))) != 0; } - void setBitAt(uint32_t x, uint32_t y) + void set(uint32_t x, uint32_t y) { XA_DEBUG_ASSERT(x < m_width && y < m_height); const uint32_t index = (x >> 6) + y * m_rowStride; m_data[index] |= UINT64_C(1) << (uint64_t(x) & UINT64_C(63)); - XA_DEBUG_ASSERT(bitAt(x, y)); + XA_DEBUG_ASSERT(get(x, y)); } - void clearAll() + void zeroOutMemory() { m_data.zeroOutMemory(); } @@ -1324,26 +1452,26 @@ public: { BitImage tmp(m_width, m_height); for (uint32_t p = 0; p < padding; p++) { - tmp.clearAll(); + tmp.zeroOutMemory(); for (uint32_t y = 0; y < m_height; y++) { for (uint32_t x = 0; x < m_width; x++) { - bool b = bitAt(x, y); + bool b = get(x, y); if (!b) { if (x > 0) { - b |= bitAt(x - 1, y); - if (y > 0) b |= bitAt(x - 1, y - 1); - if (y < m_height - 1) b |= bitAt(x - 1, y + 1); + b |= get(x - 1, y); + if (y > 0) b |= get(x - 1, y - 1); + if (y < m_height - 1) b |= get(x - 1, y + 1); } - if (y > 0) b |= bitAt(x, y - 1); - if (y < m_height - 1) b |= bitAt(x, y + 1); + if (y > 0) b |= get(x, y - 1); + if (y < m_height - 1) b |= get(x, y + 1); if (x < m_width - 1) { - b |= bitAt(x + 1, y); - if (y > 0) b |= bitAt(x + 1, y - 1); - if (y < m_height - 1) b |= bitAt(x + 1, y + 1); + b |= get(x + 1, y); + if (y > 0) b |= get(x + 1, y - 1); + if (y < m_height - 1) b |= get(x + 1, y + 1); } } if (b) - tmp.setBitAt(x, y); + tmp.set(x, y); } } tmp.m_data.copyTo(m_data); @@ -1361,7 +1489,7 @@ private: class BVH { public: - BVH(const Array &objectAabbs, uint32_t leafSize = 4) + BVH(const Array &objectAabbs, uint32_t leafSize = 4) : m_objectIds(MemTag::BVH), m_nodes(MemTag::BVH) { m_objectAabbs = &objectAabbs; if (m_objectAabbs->isEmpty()) @@ -1494,9 +1622,118 @@ private: Array m_nodes; }; -class Fit +struct Fit { -public: + static bool computeBasis(const Vector3 *points, uint32_t pointsCount, Basis *basis) + { + if (computeLeastSquaresNormal(points, pointsCount, &basis->normal)) { + basis->tangent = Basis::computeTangent(basis->normal); + basis->bitangent = Basis::computeBitangent(basis->normal, basis->tangent); + return true; + } + return computeEigen(points, pointsCount, basis); + } + +private: + // Fit a plane to a collection of points. + // Fast, and accurate to within a few degrees. + // Returns None if the points do not span a plane. + // https://www.ilikebigbits.com/2015_03_04_plane_from_points.html + static bool computeLeastSquaresNormal(const Vector3 *points, uint32_t pointsCount, Vector3 *normal) + { + XA_DEBUG_ASSERT(pointsCount >= 3); + if (pointsCount == 3) { + *normal = normalize(cross(points[2] - points[0], points[1] - points[0]), kEpsilon); + return true; + } + const float invN = 1.0f / float(pointsCount); + Vector3 centroid(0.0f); + for (uint32_t i = 0; i < pointsCount; i++) + centroid += points[i]; + centroid *= invN; + // Calculate full 3x3 covariance matrix, excluding symmetries: + float xx = 0.0f, xy = 0.0f, xz = 0.0f, yy = 0.0f, yz = 0.0f, zz = 0.0f; + for (uint32_t i = 0; i < pointsCount; i++) { + Vector3 r = points[i] - centroid; + xx += r.x * r.x; + xy += r.x * r.y; + xz += r.x * r.z; + yy += r.y * r.y; + yz += r.y * r.z; + zz += r.z * r.z; + } +#if 0 + xx *= invN; + xy *= invN; + xz *= invN; + yy *= invN; + yz *= invN; + zz *= invN; + Vector3 weighted_dir(0.0f); + { + float det_x = yy * zz - yz * yz; + const Vector3 axis_dir(det_x, xz * yz - xy * zz, xy * yz - xz * yy); + float weight = det_x * det_x; + if (dot(weighted_dir, axis_dir) < 0.0f) + weight = -weight; + weighted_dir += axis_dir * weight; + } + { + float det_y = xx * zz - xz * xz; + const Vector3 axis_dir(xz * yz - xy * zz, det_y, xy * xz - yz * xx); + float weight = det_y * det_y; + if (dot(weighted_dir, axis_dir) < 0.0f) + weight = -weight; + weighted_dir += axis_dir * weight; + } + { + float det_z = xx * yy - xy * xy; + const Vector3 axis_dir(xy * yz - xz * yy, xy * xz - yz * xx, det_z); + float weight = det_z * det_z; + if (dot(weighted_dir, axis_dir) < 0.0f) + weight = -weight; + weighted_dir += axis_dir * weight; + } + *normal = normalize(weighted_dir, kEpsilon); +#else + const float det_x = yy * zz - yz * yz; + const float det_y = xx * zz - xz * xz; + const float det_z = xx * yy - xy * xy; + const float det_max = max(det_x, max(det_y, det_z)); + if (det_max <= 0.0f) + return false; // The points don't span a plane + // Pick path with best conditioning: + Vector3 dir(0.0f); + if (det_max == det_x) + dir = Vector3(det_x,xz * yz - xy * zz,xy * yz - xz * yy); + else if (det_max == det_y) + dir = Vector3(xz * yz - xy * zz, det_y, xy * xz - yz * xx); + else if (det_max == det_z) + dir = Vector3(xy * yz - xz * yy, xy * xz - yz * xx, det_z); + const float len = length(dir); + if (isZero(len, kEpsilon)) + return false; + *normal = dir * (1.0f / len); +#endif + return isNormalized(*normal); + } + + static bool computeEigen(const Vector3 *points, uint32_t pointsCount, Basis *basis) + { + float matrix[6]; + computeCovariance(pointsCount, points, matrix); + if (matrix[0] == 0 && matrix[3] == 0 && matrix[5] == 0) + return false; + float eigenValues[3]; + Vector3 eigenVectors[3]; + if (!eigenSolveSymmetric3(matrix, eigenValues, eigenVectors)) + return false; + basis->normal = normalize(eigenVectors[2], kEpsilon); + basis->tangent = normalize(eigenVectors[0], kEpsilon); + basis->bitangent = normalize(eigenVectors[1], kEpsilon); + return true; + } + static Vector3 computeCentroid(int n, const Vector3 * points) { Vector3 centroid(0.0f); @@ -1694,9 +1931,9 @@ private: class FullVector { public: - FullVector(uint32_t dim) { m_array.resize(dim); } - FullVector(const FullVector &v) { v.m_array.copyTo(m_array); } - const FullVector &operator=(const FullVector &v) = delete; + FullVector(uint32_t dim) : m_array(MemTag::FullVector) { m_array.resize(dim); } + FullVector(const FullVector &v) : m_array(MemTag::FullVector) { v.m_array.copyTo(m_array); } + FullVector &operator=(const FullVector &v) = delete; XA_INLINE uint32_t dimension() const { return m_array.size(); } XA_INLINE const float &operator[](uint32_t index) const { return m_array[index]; } XA_INLINE float &operator[](uint32_t index) { return m_array[index]; } @@ -1767,7 +2004,10 @@ private: void alloc() { XA_DEBUG_ASSERT(m_size > 0); - m_numSlots = (uint32_t)(m_size * 1.3); + m_numSlots = nextPowerOfTwo(m_size); + auto minNumSlots = uint32_t(m_size * 1.3); + if (m_numSlots < minNumSlots) + m_numSlots = nextPowerOfTwo(minNumSlots); m_slots = XA_ALLOC_ARRAY(m_memTag, uint32_t, m_numSlots); for (uint32_t i = 0; i < m_numSlots; i++) m_slots[i] = UINT32_MAX; @@ -1778,7 +2018,7 @@ private: uint32_t computeHash(const Key &key) const { H hash; - return hash(key) % m_numSlots; + return hash(key) & (m_numSlots - 1); } int m_memTag; @@ -1806,6 +2046,16 @@ static void insertionSort(T *data, uint32_t length) class KISSRng { public: + KISSRng() { reset(); } + + void reset() + { + x = 123456789; + y = 362436000; + z = 521288629; + c = 7654321; + } + uint32_t getRange(uint32_t range) { if (range == 0) @@ -1820,7 +2070,7 @@ public: } private: - uint32_t x = 123456789, y = 362436000, z = 521288629, c = 7654321; + uint32_t x, y, z, c; }; // Based on Pierre Terdiman's and Michael Herf's source code. @@ -2009,15 +2259,27 @@ private: class BoundingBox2D { public: - Vector2 majorAxis() const { return m_majorAxis; } - Vector2 minorAxis() const { return m_minorAxis; } - Vector2 minCorner() const { return m_minCorner; } - Vector2 maxCorner() const { return m_maxCorner; } + Vector2 majorAxis, minorAxis, minCorner, maxCorner; + + void clear() + { + m_boundaryVertices.clear(); + } + + void appendBoundaryVertex(Vector2 v) + { + m_boundaryVertices.push_back(v); + } // This should compute convex hull and use rotating calipers to find the best box. Currently it uses a brute force method. - void compute(const Vector2 *boundaryVertices, uint32_t boundaryVertexCount, const Vector2 *vertices, uint32_t vertexCount) + // If vertices is null or vertexCount is 0, the boundary vertices are used. + void compute(const Vector2 *vertices = nullptr, uint32_t vertexCount = 0) { - convexHull(boundaryVertices, boundaryVertexCount, m_hull, 0.00001f); + if (!vertices || vertexCount == 0) { + vertices = m_boundaryVertices.data(); + vertexCount = m_boundaryVertices.size(); + } + convexHull(m_boundaryVertices.data(), m_boundaryVertices.size(), m_hull, 0.00001f); // @@ Ideally I should use rotating calipers to find the best box. Using brute force for now. float best_area = FLT_MAX; Vector2 best_min(0); @@ -2051,11 +2313,11 @@ public: best_axis = axis; } } - m_majorAxis = best_axis; - m_minorAxis = Vector2(-best_axis.y, best_axis.x); - m_minCorner = best_min; - m_maxCorner = best_max; - XA_ASSERT(isFinite(m_majorAxis) && isFinite(m_minorAxis) && isFinite(m_minCorner)); + majorAxis = best_axis; + minorAxis = Vector2(-best_axis.y, best_axis.x); + minCorner = best_min; + maxCorner = best_max; + XA_ASSERT(isFinite(majorAxis) && isFinite(minorAxis) && isFinite(minCorner)); } private: @@ -2088,6 +2350,7 @@ private: } // Filter top list. output.clear(); + XA_DEBUG_ASSERT(m_top.size() >= 2); output.push_back(m_top[0]); output.push_back(m_top[1]); for (uint32_t i = 2; i < m_top.size(); ) { @@ -2103,6 +2366,7 @@ private: } } uint32_t top_count = output.size(); + XA_DEBUG_ASSERT(m_bottom.size() >= 2); output.push_back(m_bottom[1]); // Filter bottom list. for (uint32_t i = 2; i < m_bottom.size(); ) { @@ -2122,9 +2386,9 @@ private: output.pop_back(); } + Array m_boundaryVertices; Array m_coords; Array m_top, m_bottom, m_hull; - Vector2 m_majorAxis, m_minorAxis, m_minCorner, m_maxCorner; }; static uint32_t meshEdgeFace(uint32_t edge) { return edge / 3; } @@ -2152,7 +2416,7 @@ static void meshGetBoundaryLoops(const Mesh &mesh, Array &boundaryLoop class Mesh { public: - Mesh(float epsilon, uint32_t approxVertexCount, uint32_t approxFaceCount, uint32_t flags = 0, uint32_t id = UINT32_MAX) : m_epsilon(epsilon), m_flags(flags), m_id(id), m_faceIgnore(MemTag::Mesh), m_faceGroups(MemTag::Mesh), m_indices(MemTag::MeshIndices), m_positions(MemTag::MeshPositions), m_normals(MemTag::MeshNormals), m_texcoords(MemTag::MeshTexcoords), m_colocalVertexCount(0), m_nextColocalVertex(MemTag::MeshColocals), m_boundaryVertices(MemTag::MeshBoundaries), m_oppositeEdges(MemTag::MeshBoundaries), m_nextBoundaryEdges(MemTag::MeshBoundaries), m_edgeMap(MemTag::MeshEdgeMap, approxFaceCount * 3) + Mesh(float epsilon, uint32_t approxVertexCount, uint32_t approxFaceCount, uint32_t flags = 0, uint32_t id = UINT32_MAX) : m_epsilon(epsilon), m_flags(flags), m_id(id), m_faceIgnore(MemTag::Mesh), m_ignoredFaceCount(0), m_indices(MemTag::MeshIndices), m_positions(MemTag::MeshPositions), m_normals(MemTag::MeshNormals), m_texcoords(MemTag::MeshTexcoords), m_faceGroups(MemTag::Mesh), m_faceGroupFirstFace(MemTag::Mesh), m_faceGroupNextFace(MemTag::Mesh), m_faceGroupFaceCounts(MemTag::Mesh), m_colocalVertexCount(0), m_nextColocalVertex(MemTag::MeshColocals), m_boundaryEdges(MemTag::MeshBoundaries), m_oppositeEdges(MemTag::MeshBoundaries), m_nextBoundaryEdges(MemTag::MeshBoundaries), m_edgeMap(MemTag::MeshEdgeMap, approxFaceCount * 3) { m_indices.reserve(approxFaceCount * 3); m_positions.reserve(approxVertexCount); @@ -2165,6 +2429,7 @@ public: m_normals.reserve(approxVertexCount); } + static constexpr uint16_t kInvalidFaceGroup = UINT16_MAX; uint32_t flags() const { return m_flags; } uint32_t id() const { return m_id; } @@ -2199,9 +2464,12 @@ public: { AddFaceResult::Enum result = AddFaceResult::OK; if (m_flags & MeshFlags::HasFaceGroups) - m_faceGroups.push_back(UINT32_MAX); - if (m_flags & MeshFlags::HasIgnoredFaces) + m_faceGroups.push_back(kInvalidFaceGroup); + if (m_flags & MeshFlags::HasIgnoredFaces) { m_faceIgnore.push_back(ignore); + if (ignore) + m_ignoredFaceCount++; + } const uint32_t firstIndex = m_indices.size(); for (uint32_t i = 0; i < 3; i++) m_indices.push_back(indices[i]); @@ -2221,13 +2489,13 @@ public: void createColocals() { const uint32_t vertexCount = m_positions.size(); - Array aabbs; + Array aabbs(MemTag::BVH); aabbs.resize(vertexCount); for (uint32_t i = 0; i < m_positions.size(); i++) aabbs[i] = AABB(m_positions[i], m_epsilon); BVH bvh(aabbs); - Array colocals; - Array potential; + Array colocals(MemTag::MeshColocals); + Array potential(MemTag::MeshColocals); m_colocalVertexCount = 0; m_nextColocalVertex.resize(vertexCount); for (uint32_t i = 0; i < vertexCount; i++) @@ -2259,7 +2527,7 @@ public: } // Check if the face duplicates any edges of any face already in the group. - bool faceDuplicatesGroupEdge(uint32_t group, uint32_t face) const + bool faceDuplicatesGroupEdge(uint16_t group, uint32_t face) const { for (FaceEdgeIterator edgeIt(this, face); !edgeIt.isDone(); edgeIt.advance()) { for (ColocalEdgeIterator colocalEdgeIt(this, edgeIt.vertex0(), edgeIt.vertex1()); !colocalEdgeIt.isDone(); colocalEdgeIt.advance()) { @@ -2270,55 +2538,31 @@ public: return false; } - // Check if the face mirrors any face already in the group. - // i.e. don't want two-sided faces in the same group. - // A face mirrors another face if all edges match with opposite winding. - bool faceMirrorsGroupFace(uint32_t group, uint32_t face) const - { - FaceEdgeIterator edgeIt(this, face); - for (ColocalEdgeIterator colocalEdgeIt(this, edgeIt.vertex1(), edgeIt.vertex0()); !colocalEdgeIt.isDone(); colocalEdgeIt.advance()) { - const uint32_t candidateFace = meshEdgeFace(colocalEdgeIt.edge()); - if (m_faceGroups[candidateFace] == group) { - // Found a match for mirrored first edge, try the other edges. - bool match = false; - for (; !edgeIt.isDone(); edgeIt.advance()) { - match = false; - for (ColocalEdgeIterator colocalEdgeIt2(this, edgeIt.vertex1(), edgeIt.vertex0()); !colocalEdgeIt2.isDone(); colocalEdgeIt2.advance()) { - if (meshEdgeFace(colocalEdgeIt2.edge()) == candidateFace) { - match = true; - break; - } - } - if (!match) - break; - } - if (match) - return true; // All edges are mirrored in this face. - // Try the next face. - edgeIt = FaceEdgeIterator(this, candidateFace); - } - } - return false; - } - void createFaceGroups() { - uint32_t group = 0; + uint32_t firstUnassignedFace = 0; + uint16_t group = 0; Array growFaces; + const uint32_t n = faceCount(); + m_faceGroupNextFace.resize(n); for (;;) { // Find an unassigned face. uint32_t face = UINT32_MAX; - for (uint32_t f = 0; f < faceCount(); f++) { - if (m_faceGroups[f] == UINT32_MAX && !isFaceIgnored(f)) { + for (uint32_t f = firstUnassignedFace; f < n; f++) { + if (m_faceGroups[f] == kInvalidFaceGroup && !isFaceIgnored(f)) { face = f; + firstUnassignedFace = f + 1; break; } } if (face == UINT32_MAX) break; // All faces assigned to a group (except ignored faces). m_faceGroups[face] = group; + m_faceGroupNextFace[face] = UINT32_MAX; + m_faceGroupFirstFace.push_back(face); growFaces.clear(); growFaces.push_back(face); + uint32_t prevFace = face, groupFaceCount = 1; // Find faces connected to the face and assign them to the same group as the face, unless they are already assigned to another group. for (;;) { if (growFaces.isEmpty()) @@ -2340,24 +2584,38 @@ public: alreadyAssignedToThisGroup = true; break; } - if (m_faceGroups[oppositeFace] != UINT32_MAX) + if (m_faceGroups[oppositeFace] != kInvalidFaceGroup) continue; // Connected face is already assigned to another group. if (faceDuplicatesGroupEdge(group, oppositeFace)) continue; // Don't want duplicate edges in a group. - if (faceMirrorsGroupFace(group, oppositeFace)) - continue; // Don't want two-sided faces in a group. const uint32_t oppositeVertex0 = m_indices[meshEdgeIndex0(oppositeEdge)]; const uint32_t oppositeVertex1 = m_indices[meshEdgeIndex1(oppositeEdge)]; if (bestConnectedFace == UINT32_MAX || (oppositeVertex0 == edgeIt.vertex1() && oppositeVertex1 == edgeIt.vertex0())) bestConnectedFace = oppositeFace; +#if 0 + else { + // Choose the opposite face with the smallest dihedral angle. + const float d1 = 1.0f - dot(computeFaceNormal(f), computeFaceNormal(bestConnectedFace)); + const float d2 = 1.0f - dot(computeFaceNormal(f), computeFaceNormal(oppositeFace)); + if (d2 < d1) + bestConnectedFace = oppositeFace; + } +#endif } if (!alreadyAssignedToThisGroup && bestConnectedFace != UINT32_MAX) { m_faceGroups[bestConnectedFace] = group; + m_faceGroupNextFace[bestConnectedFace] = UINT32_MAX; + if (prevFace != UINT32_MAX) + m_faceGroupNextFace[prevFace] = bestConnectedFace; + prevFace = bestConnectedFace; + groupFaceCount++; growFaces.push_back(bestConnectedFace); } } } + m_faceGroupFaceCounts.push_back(groupFaceCount); group++; + XA_ASSERT(group < kInvalidFaceGroup); } } @@ -2366,29 +2624,27 @@ public: const uint32_t edgeCount = m_indices.size(); const uint32_t vertexCount = m_positions.size(); m_oppositeEdges.resize(edgeCount); - m_boundaryVertices.resize(vertexCount); + m_boundaryEdges.reserve(uint32_t(edgeCount * 0.1f)); + m_isBoundaryVertex.resize(vertexCount); + m_isBoundaryVertex.zeroOutMemory(); for (uint32_t i = 0; i < edgeCount; i++) m_oppositeEdges[i] = UINT32_MAX; - for (uint32_t i = 0; i < vertexCount; i++) - m_boundaryVertices[i] = false; - const bool hasFaceGroups = m_flags & MeshFlags::HasFaceGroups; - for (uint32_t i = 0; i < faceCount(); i++) { + const uint32_t faceCount = m_indices.size() / 3; + for (uint32_t i = 0; i < faceCount; i++) { if (isFaceIgnored(i)) continue; for (uint32_t j = 0; j < 3; j++) { - const uint32_t vertex0 = m_indices[i * 3 + j]; + const uint32_t edge = i * 3 + j; + const uint32_t vertex0 = m_indices[edge]; const uint32_t vertex1 = m_indices[i * 3 + (j + 1) % 3]; // If there is an edge with opposite winding to this one, the edge isn't on a boundary. - const uint32_t oppositeEdge = findEdge(hasFaceGroups ? m_faceGroups[i] : UINT32_MAX, vertex1, vertex0); + const uint32_t oppositeEdge = findEdge(vertex1, vertex0); if (oppositeEdge != UINT32_MAX) { -#if XA_DEBUG - if (hasFaceGroups) - XA_DEBUG_ASSERT(m_faceGroups[meshEdgeFace(oppositeEdge)] == m_faceGroups[i]); -#endif - XA_DEBUG_ASSERT(!isFaceIgnored(meshEdgeFace(oppositeEdge))); - m_oppositeEdges[i * 3 + j] = oppositeEdge; + m_oppositeEdges[edge] = oppositeEdge; } else { - m_boundaryVertices[vertex0] = m_boundaryVertices[vertex1] = true; + m_boundaryEdges.push_back(edge); + m_isBoundaryVertex.set(vertex0); + m_isBoundaryVertex.set(vertex1); } } } @@ -2407,12 +2663,12 @@ public: m_nextBoundaryEdges[i] = UINT32_MAX; uint32_t numBoundaryLoops = 0, numUnclosedBoundaries = 0; BitArray linkedEdges(edgeCount); - linkedEdges.clearAll(); + linkedEdges.zeroOutMemory(); for (;;) { // Find the first boundary edge that hasn't been linked yet. uint32_t firstEdge = UINT32_MAX; for (uint32_t i = 0; i < edgeCount; i++) { - if (m_oppositeEdges[i] == UINT32_MAX && !linkedEdges.bitAt(i)) { + if (m_oppositeEdges[i] == UINT32_MAX && !linkedEdges.get(i)) { firstEdge = i; break; } @@ -2430,12 +2686,8 @@ public: const uint32_t otherEdge = mapIndex / 2; // Two vertices added per edge. if (m_oppositeEdges[otherEdge] != UINT32_MAX) goto next; // Not a boundary edge. - if (linkedEdges.bitAt(otherEdge)) + if (linkedEdges.get(otherEdge)) goto next; // Already linked. - if (m_flags & MeshFlags::HasFaceGroups && m_faceGroups[meshEdgeFace(currentEdge)] != m_faceGroups[meshEdgeFace(otherEdge)]) - goto next; // Don't cross face groups. - if (isFaceIgnored(meshEdgeFace(otherEdge))) - goto next; // Face is ignored. if (m_indices[meshEdgeIndex0(otherEdge)] != it.vertex()) goto next; // Edge contains the vertex, but it's the wrong one. // First edge (closing the boundary loop) has the highest priority. @@ -2449,11 +2701,11 @@ public: if (bestNextEdge == UINT32_MAX) { numUnclosedBoundaries++; if (currentEdge == firstEdge) - linkedEdges.setBitAt(firstEdge); // Only 1 edge in this boundary "loop". + linkedEdges.set(firstEdge); // Only 1 edge in this boundary "loop". break; // Can't find a next edge. } m_nextBoundaryEdges[currentEdge] = bestNextEdge; - linkedEdges.setBitAt(bestNextEdge); + linkedEdges.set(bestNextEdge); currentEdge = bestNextEdge; if (currentEdge == firstEdge) { numBoundaryLoops++; @@ -2461,6 +2713,7 @@ public: } } } +#if XA_FIX_INTERNAL_BOUNDARY_LOOPS // Find internal boundary loops and separate them. // Detect by finding two edges in a boundary loop that have a colocal end vertex. // Fix by swapping their next boundary edge. @@ -2469,28 +2722,29 @@ public: fixInternalBoundary: meshGetBoundaryLoops(*this, boundaryLoops); for (uint32_t loop = 0; loop < boundaryLoops.size(); loop++) { - linkedEdges.clearAll(); - for (Mesh::BoundaryEdgeIterator it1(this, boundaryLoops[loop]); !it1.isDone(); it1.advance()) { + linkedEdges.zeroOutMemory(); + for (Mesh::BoundaryLoopEdgeIterator it1(this, boundaryLoops[loop]); !it1.isDone(); it1.advance()) { const uint32_t e1 = it1.edge(); - if (linkedEdges.bitAt(e1)) + if (linkedEdges.get(e1)) continue; - for (Mesh::BoundaryEdgeIterator it2(this, boundaryLoops[loop]); !it2.isDone(); it2.advance()) { + for (Mesh::BoundaryLoopEdgeIterator it2(this, boundaryLoops[loop]); !it2.isDone(); it2.advance()) { const uint32_t e2 = it2.edge(); - if (e1 == e2 || !isBoundaryEdge(e2) || linkedEdges.bitAt(e2)) + if (e1 == e2 || !isBoundaryEdge(e2) || linkedEdges.get(e2)) continue; if (!areColocal(m_indices[meshEdgeIndex1(e1)], m_indices[meshEdgeIndex1(e2)])) continue; swap(m_nextBoundaryEdges[e1], m_nextBoundaryEdges[e2]); - linkedEdges.setBitAt(e1); - linkedEdges.setBitAt(e2); + linkedEdges.set(e1); + linkedEdges.set(e2); goto fixInternalBoundary; // start over } } } +#endif } /// Find edge, test all colocals. - uint32_t findEdge(uint32_t faceGroup, uint32_t vertex0, uint32_t vertex1) const + uint32_t findEdge(uint32_t vertex0, uint32_t vertex1) const { uint32_t result = UINT32_MAX; if (m_nextColocalVertex.isEmpty()) { @@ -2498,7 +2752,7 @@ public: uint32_t edge = m_edgeMap.get(key); while (edge != UINT32_MAX) { // Don't find edges of ignored faces. - if ((faceGroup == UINT32_MAX || m_faceGroups[meshEdgeFace(edge)] == faceGroup) && !isFaceIgnored(meshEdgeFace(edge))) { + if (!isFaceIgnored(meshEdgeFace(edge))) { //XA_DEBUG_ASSERT(m_id != UINT32_MAX || (m_id == UINT32_MAX && result == UINT32_MAX)); // duplicate edge - ignore on initial meshes result = edge; #if !XA_DEBUG @@ -2514,7 +2768,7 @@ public: uint32_t edge = m_edgeMap.get(key); while (edge != UINT32_MAX) { // Don't find edges of ignored faces. - if ((faceGroup == UINT32_MAX || m_faceGroups[meshEdgeFace(edge)] == faceGroup) && !isFaceIgnored(meshEdgeFace(edge))) { + if (!isFaceIgnored(meshEdgeFace(edge))) { XA_DEBUG_ASSERT(m_id != UINT32_MAX || (m_id == UINT32_MAX && result == UINT32_MAX)); // duplicate edge - ignore on initial meshes result = edge; #if !XA_DEBUG @@ -2607,7 +2861,7 @@ public: { float area = 0; for (uint32_t f = 0; f < faceCount(); f++) - area += faceArea(f); + area += computeFaceArea(f); XA_DEBUG_ASSERT(area >= 0); return area; } @@ -2616,11 +2870,11 @@ public: { float area = 0; for (uint32_t f = 0; f < faceCount(); f++) - area += faceParametricArea(f); + area += computeFaceParametricArea(f); return fabsf(area); // May be negative, depends on texcoord winding. } - float faceArea(uint32_t face) const + float computeFaceArea(uint32_t face) const { const Vector3 &p0 = m_positions[m_indices[face * 3 + 0]]; const Vector3 &p1 = m_positions[m_indices[face * 3 + 1]]; @@ -2628,7 +2882,7 @@ public: return length(cross(p1 - p0, p2 - p0)) * 0.5f; } - Vector3 faceCentroid(uint32_t face) const + Vector3 computeFaceCentroid(uint32_t face) const { Vector3 sum(0.0f); for (uint32_t i = 0; i < 3; i++) @@ -2636,22 +2890,9 @@ public: return sum / 3.0f; } - Vector3 calculateFaceNormal(uint32_t face) const - { - return normalizeSafe(triangleNormalAreaScaled(face), Vector3(0, 0, 1), 0.0f); - } - - float faceParametricArea(uint32_t face) const - { - const Vector2 &t0 = m_texcoords[m_indices[face * 3 + 0]]; - const Vector2 &t1 = m_texcoords[m_indices[face * 3 + 1]]; - const Vector2 &t2 = m_texcoords[m_indices[face * 3 + 2]]; - return triangleArea(t0, t1, t2) * 0.5f; - } - // Average of the edge midpoints weighted by the edge length. // I want a point inside the triangle, but closer to the cirumcenter. - Vector3 triangleCenter(uint32_t face) const + Vector3 computeFaceCenter(uint32_t face) const { const Vector3 &p0 = m_positions[m_indices[face * 3 + 0]]; const Vector3 &p1 = m_positions[m_indices[face * 3 + 1]]; @@ -2665,22 +2906,25 @@ public: return m0 + m1 + m2; } - // Unnormalized face normal assuming it's a triangle. - Vector3 triangleNormal(uint32_t face) const - { - return normalizeSafe(triangleNormalAreaScaled(face), Vector3(0), 0.0f); - } - - Vector3 triangleNormalAreaScaled(uint32_t face) const + Vector3 computeFaceNormal(uint32_t face) const { const Vector3 &p0 = m_positions[m_indices[face * 3 + 0]]; const Vector3 &p1 = m_positions[m_indices[face * 3 + 1]]; const Vector3 &p2 = m_positions[m_indices[face * 3 + 2]]; const Vector3 e0 = p2 - p0; const Vector3 e1 = p1 - p0; - return cross(e0, e1); + const Vector3 normalAreaScaled = cross(e0, e1); + return normalizeSafe(normalAreaScaled, Vector3(0, 0, 1), 0.0f); } + float computeFaceParametricArea(uint32_t face) const + { + const Vector2 &t0 = m_texcoords[m_indices[face * 3 + 0]]; + const Vector2 &t1 = m_texcoords[m_indices[face * 3 + 1]]; + const Vector2 &t2 = m_texcoords[m_indices[face * 3 + 2]]; + return triangleArea(t0, t1, t2); + } + // @@ This is not exactly accurate, we should compare the texture coordinates... bool isSeam(uint32_t edge) const { @@ -2732,7 +2976,8 @@ public: XA_INLINE uint32_t edgeCount() const { return m_indices.size(); } XA_INLINE uint32_t oppositeEdge(uint32_t edge) const { return m_oppositeEdges[edge]; } XA_INLINE bool isBoundaryEdge(uint32_t edge) const { return m_oppositeEdges[edge] == UINT32_MAX; } - XA_INLINE bool isBoundaryVertex(uint32_t vertex) const { return m_boundaryVertices[vertex]; } + XA_INLINE const Array &boundaryEdges() const { return m_boundaryEdges; } + XA_INLINE bool isBoundaryVertex(uint32_t vertex) const { return m_isBoundaryVertex.get(vertex); } XA_INLINE uint32_t colocalVertexCount() const { return m_colocalVertexCount; } XA_INLINE uint32_t vertexCount() const { return m_positions.size(); } XA_INLINE uint32_t vertexAt(uint32_t i) const { return m_indices[i]; } @@ -2740,10 +2985,14 @@ public: XA_INLINE const Vector3 &normal(uint32_t vertex) const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasNormals); return m_normals[vertex]; } XA_INLINE const Vector2 &texcoord(uint32_t vertex) const { return m_texcoords[vertex]; } XA_INLINE Vector2 &texcoord(uint32_t vertex) { return m_texcoords[vertex]; } + XA_INLINE const Vector2 *texcoords() const { return m_texcoords.data(); } XA_INLINE Vector2 *texcoords() { return m_texcoords.data(); } + XA_INLINE uint32_t ignoredFaceCount() const { return m_ignoredFaceCount; } XA_INLINE uint32_t faceCount() const { return m_indices.size() / 3; } - XA_INLINE uint32_t faceGroupCount() const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroups.size(); } - XA_INLINE uint32_t faceGroupAt(uint32_t face) const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroups[face]; } + XA_INLINE uint16_t faceGroupAt(uint32_t face) const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroups[face]; } + XA_INLINE uint32_t faceGroupCount() const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroupFaceCounts.size(); } + XA_INLINE uint32_t faceGroupNextFace(uint32_t face) const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroupNextFace[face]; } + XA_INLINE uint32_t faceGroupFaceCount(uint32_t group) const { XA_DEBUG_ASSERT(m_flags & MeshFlags::HasFaceGroups); return m_faceGroupFaceCounts[group]; } XA_INLINE const uint32_t *indices() const { return m_indices.data(); } XA_INLINE uint32_t indexCount() const { return m_indices.size(); } @@ -2754,18 +3003,25 @@ private: uint32_t m_flags; uint32_t m_id; Array m_faceIgnore; - Array m_faceGroups; + uint32_t m_ignoredFaceCount; Array m_indices; Array m_positions; Array m_normals; Array m_texcoords; + // Populated by createFaceGroups + Array m_faceGroups; + Array m_faceGroupFirstFace; + Array m_faceGroupNextFace; // In: face. Out: the next face in the same group. + Array m_faceGroupFaceCounts; // In: face group. Out: number of faces in the group. + // Populated by createColocals uint32_t m_colocalVertexCount; Array m_nextColocalVertex; // In: vertex index. Out: the vertex index of the next colocal position. // Populated by createBoundaries - Array m_boundaryVertices; + BitArray m_isBoundaryVertex; + Array m_boundaryEdges; Array m_oppositeEdges; // In: edge index. Out: the index of the opposite edge (i.e. wound the opposite direction). UINT32_MAX if the input edge is a boundary edge. // Populated by linkBoundaries @@ -2776,28 +3032,24 @@ private: EdgeKey() {} EdgeKey(const EdgeKey &k) : v0(k.v0), v1(k.v1) {} EdgeKey(uint32_t v0, uint32_t v1) : v0(v0), v1(v1) {} - - void operator=(const EdgeKey &k) - { - v0 = k.v0; - v1 = k.v1; - } - bool operator==(const EdgeKey &k) const - { - return v0 == k.v0 && v1 == k.v1; - } + bool operator==(const EdgeKey &k) const { return v0 == k.v0 && v1 == k.v1; } uint32_t v0; uint32_t v1; }; - HashMap m_edgeMap; + struct EdgeHash + { + uint32_t operator()(const EdgeKey &k) const { return k.v0 * 32768u + k.v1; } + }; + + HashMap m_edgeMap; public: - class BoundaryEdgeIterator + class BoundaryLoopEdgeIterator { public: - BoundaryEdgeIterator(const Mesh *mesh, uint32_t edge) : m_mesh(mesh), m_first(UINT32_MAX), m_current(edge) {} + BoundaryLoopEdgeIterator(const Mesh *mesh, uint32_t edge) : m_mesh(mesh), m_first(UINT32_MAX), m_current(edge) {} void advance() { @@ -2866,7 +3118,14 @@ public: public: ColocalEdgeIterator(const Mesh *mesh, uint32_t vertex0, uint32_t vertex1) : m_mesh(mesh), m_vertex0It(mesh, vertex0), m_vertex1It(mesh, vertex1), m_vertex1(vertex1) { - resetElement(); + do { + if (!resetElement()) { + advanceVertex1(); + } + else { + break; + } + } while (!isDone()); } void advance() @@ -2885,7 +3144,7 @@ public: } private: - void resetElement() + bool resetElement() { m_edge = m_mesh->m_edgeMap.get(Mesh::EdgeKey(m_vertex0It.vertex(), m_vertex1It.vertex())); while (m_edge != UINT32_MAX) { @@ -2893,8 +3152,10 @@ public: break; m_edge = m_mesh->m_edgeMap.getNext(m_edge); } - if (m_edge == UINT32_MAX) - advanceVertex1(); + if (m_edge == UINT32_MAX) { + return false; + } + return true; } void advanceElement() @@ -2910,22 +3171,22 @@ public: advanceVertex1(); } - void advanceVertex0() - { - m_vertex0It.advance(); - if (m_vertex0It.isDone()) - return; - m_vertex1It = ColocalVertexIterator(m_mesh, m_vertex1); - resetElement(); - } - void advanceVertex1() { - m_vertex1It.advance(); - if (m_vertex1It.isDone()) - advanceVertex0(); - else - resetElement(); + auto successful = false; + while (!successful) { + m_vertex1It.advance(); + if (m_vertex1It.isDone()) { + if (!m_vertex0It.isDone()) { + m_vertex0It.advance(); + m_vertex1It = ColocalVertexIterator(m_mesh, m_vertex1); + } + else { + return; + } + } + successful = resetElement(); + } } bool isIgnoredFace() const @@ -2976,16 +3237,8 @@ public: return meshEdgeFace(oedge); } - uint32_t vertex0() const - { - return m_mesh->m_indices[m_face * 3 + m_relativeEdge]; - } - - uint32_t vertex1() const - { - return m_mesh->m_indices[m_face * 3 + (m_relativeEdge + 1) % 3]; - } - + uint32_t vertex0() const { return m_mesh->m_indices[m_face * 3 + m_relativeEdge]; } + uint32_t vertex1() const { return m_mesh->m_indices[m_face * 3 + (m_relativeEdge + 1) % 3]; } const Vector3 &position0() const { return m_mesh->m_positions[vertex0()]; } const Vector3 &position1() const { return m_mesh->m_positions[vertex1()]; } const Vector3 &normal0() const { return m_mesh->m_normals[vertex0()]; } @@ -2999,8 +3252,39 @@ public: uint32_t m_edge; uint32_t m_relativeEdge; }; + + class GroupFaceIterator + { + public: + GroupFaceIterator(const Mesh *mesh, uint32_t group) : m_mesh(mesh) + { + XA_DEBUG_ASSERT(group != UINT32_MAX); + m_current = mesh->m_faceGroupFirstFace[group]; + } + + void advance() + { + m_current = m_mesh->m_faceGroupNextFace[m_current]; + } + + bool isDone() const + { + return m_current == UINT32_MAX; + } + + uint32_t face() const + { + return m_current; + } + + private: + const Mesh *m_mesh; + uint32_t m_current; + }; }; +constexpr uint16_t Mesh::kInvalidFaceGroup; + static bool meshCloseHole(Mesh *mesh, const Array &holeVertices, const Vector3 &normal) { #if XA_CLOSE_HOLES_CHECK_EDGE_INTERSECTION @@ -3027,15 +3311,15 @@ static bool meshCloseHole(Mesh *mesh, const Array &holeVertices, const const uint32_t i3 = (i + 1) % frontCount; const Vector3 edge1 = frontPoints[i1] - frontPoints[i2]; const Vector3 edge2 = frontPoints[i3] - frontPoints[i2]; - frontAngles[i] = acosf(dot(edge1, edge2) / (length(edge1) * length(edge2))); + frontAngles[i] = atan2f(length(cross(edge1, edge2)), dot(edge1, edge2)); if (frontAngles[i] >= smallestAngle || isNan(frontAngles[i])) continue; // Don't duplicate edges. - if (mesh->findEdge(UINT32_MAX, frontVertices[i1], frontVertices[i2]) != UINT32_MAX) + if (mesh->findEdge(frontVertices[i1], frontVertices[i2]) != UINT32_MAX) continue; - if (mesh->findEdge(UINT32_MAX, frontVertices[i2], frontVertices[i3]) != UINT32_MAX) + if (mesh->findEdge(frontVertices[i2], frontVertices[i3]) != UINT32_MAX) continue; - if (mesh->findEdge(UINT32_MAX, frontVertices[i3], frontVertices[i1]) != UINT32_MAX) + if (mesh->findEdge(frontVertices[i3], frontVertices[i1]) != UINT32_MAX) continue; /* Make sure he new edge that would be formed by (i3, i1) doesn't intersect any vertices. This often happens when fixing t-junctions. @@ -3128,9 +3412,10 @@ static bool meshCloseHole(Mesh *mesh, const Array &holeVertices, const return true; } -static bool meshCloseHoles(Mesh *mesh, const Array &boundaryLoops, const Vector3 &normal, Array &holeFaceCounts) +static bool meshCloseHoles(Mesh *mesh, const Array &boundaryLoops, const Vector3 &normal, uint32_t *holeCount, Array *holeFaceCounts) { - holeFaceCounts.clear(); + if (holeFaceCounts) + holeFaceCounts->clear(); // Compute lengths. const uint32_t boundaryCount = boundaryLoops.size(); Array boundaryLengths; @@ -3139,7 +3424,7 @@ static bool meshCloseHoles(Mesh *mesh, const Array &boundaryLoops, con for (uint32_t i = 0; i < boundaryCount; i++) { float boundaryLength = 0.0f; boundaryEdgeCounts[i] = 0; - for (Mesh::BoundaryEdgeIterator it(mesh, boundaryLoops[i]); !it.isDone(); it.advance()) { + for (Mesh::BoundaryLoopEdgeIterator it(mesh, boundaryLoops[i]); !it.isDone(); it.advance()) { const Vector3 &t0 = mesh->position(mesh->vertexAt(meshEdgeIndex0(it.edge()))); const Vector3 &t1 = mesh->position(mesh->vertexAt(meshEdgeIndex1(it.edge()))); boundaryLength += length(t1 - t0); @@ -3167,7 +3452,7 @@ static bool meshCloseHoles(Mesh *mesh, const Array &boundaryLoops, con holePoints.resize(boundaryEdgeCounts[i]); // Winding is backwards for internal boundaries. uint32_t e = 0; - for (Mesh::BoundaryEdgeIterator it(mesh, boundaryLoops[i]); !it.isDone(); it.advance()) { + for (Mesh::BoundaryLoopEdgeIterator it(mesh, boundaryLoops[i]); !it.isDone(); it.advance()) { const uint32_t vertex = mesh->vertexAt(meshEdgeIndex0(it.edge())); holeVertices[boundaryEdgeCounts[i] - 1 - e] = vertex; holePoints[boundaryEdgeCounts[i] - 1 - e] = mesh->position(vertex); @@ -3176,7 +3461,10 @@ static bool meshCloseHoles(Mesh *mesh, const Array &boundaryLoops, con const uint32_t oldFaceCount = mesh->faceCount(); if (!meshCloseHole(mesh, holeVertices, normal)) result = false; // Return false if any hole failed to close, but keep trying to close other holes. - holeFaceCounts.push_back(mesh->faceCount() - oldFaceCount); + if (holeCount) + (*holeCount)++; + if (holeFaceCounts) + holeFaceCounts->push_back(mesh->faceCount() - oldFaceCount); } return result; } @@ -3307,104 +3595,18 @@ static void meshGetBoundaryLoops(const Mesh &mesh, Array &boundaryLoop { const uint32_t edgeCount = mesh.edgeCount(); BitArray bitFlags(edgeCount); - bitFlags.clearAll(); + bitFlags.zeroOutMemory(); boundaryLoops.clear(); // Search for boundary edges. Mark all the edges that belong to the same boundary. for (uint32_t e = 0; e < edgeCount; e++) { - if (bitFlags.bitAt(e) || !mesh.isBoundaryEdge(e)) + if (bitFlags.get(e) || !mesh.isBoundaryEdge(e)) continue; - for (Mesh::BoundaryEdgeIterator it(&mesh, e); !it.isDone(); it.advance()) - bitFlags.setBitAt(it.edge()); + for (Mesh::BoundaryLoopEdgeIterator it(&mesh, e); !it.isDone(); it.advance()) + bitFlags.set(it.edge()); boundaryLoops.push_back(e); } } -class MeshTopology -{ -public: - MeshTopology(const Mesh *mesh) - { - const uint32_t vertexCount = mesh->colocalVertexCount(); - const uint32_t faceCount = mesh->faceCount(); - const uint32_t edgeCount = mesh->edgeCount(); - Array stack(MemTag::Default); - stack.reserve(faceCount); - BitArray bitFlags(faceCount); - bitFlags.clearAll(); - // Compute connectivity. - m_connectedCount = 0; - for (uint32_t f = 0; f < faceCount; f++ ) { - if (bitFlags.bitAt(f) == false) { - m_connectedCount++; - stack.push_back(f); - while (!stack.isEmpty()) { - const uint32_t top = stack.back(); - XA_ASSERT(top != uint32_t(~0)); - stack.pop_back(); - if (bitFlags.bitAt(top) == false) { - bitFlags.setBitAt(top); - for (Mesh::FaceEdgeIterator it(mesh, top); !it.isDone(); it.advance()) { - const uint32_t oppositeFace = it.oppositeFace(); - if (oppositeFace != UINT32_MAX) - stack.push_back(oppositeFace); - } - } - } - } - } - XA_ASSERT(stack.isEmpty()); - // Count boundary loops. - m_boundaryCount = 0; - bitFlags.resize(edgeCount); - bitFlags.clearAll(); - // Don't forget to link the boundary otherwise this won't work. - for (uint32_t e = 0; e < edgeCount; e++) { - if (bitFlags.bitAt(e) || !mesh->isBoundaryEdge(e)) - continue; - m_boundaryCount++; - for (Mesh::BoundaryEdgeIterator it(mesh, e); !it.isDone(); it.advance()) - bitFlags.setBitAt(it.edge()); - } - // Compute euler number. - m_eulerNumber = vertexCount - edgeCount + faceCount; - // Compute genus. (only valid on closed connected surfaces) - m_genus = -1; - if (isClosed() && isConnected()) - m_genus = (2 - m_eulerNumber) / 2; - } - - /// Determine if the mesh is connected. - bool isConnected() const - { - return m_connectedCount == 1; - } - - /// Determine if the mesh is closed. (Each edge is shared by two faces) - bool isClosed() const - { - return m_boundaryCount == 0; - } - - /// Return true if the mesh has the topology of a disk. - bool isDisk() const - { - return isConnected() && m_boundaryCount == 1/* && m_eulerNumber == 1*/; - } - -private: - ///< Number of boundary loops. - int m_boundaryCount; - - ///< Number of connected components. - int m_connectedCount; - - ///< Euler number. - int m_eulerNumber; - - /// Mesh genus. - int m_genus; -}; - struct Progress { Progress(ProgressCategory::Enum category, ProgressFunc func, void *userData, uint32_t maxValue) : value(0), cancel(false), m_category(category), m_func(func), m_userData(userData), m_maxValue(maxValue), m_progress(0) @@ -3482,6 +3684,7 @@ class TaskScheduler public: TaskScheduler() : m_shutdown(false) { + m_threadIndex = 0; // Max with current task scheduler usage is 1 per thread + 1 deep nesting, but allow for some slop. m_maxGroups = std::thread::hardware_concurrency() * 4; m_groups = XA_ALLOC_ARRAY(MemTag::Default, TaskGroup, m_maxGroups); @@ -3494,7 +3697,7 @@ public: for (uint32_t i = 0; i < m_workers.size(); i++) { new (&m_workers[i]) Worker(); m_workers[i].wakeup = false; - m_workers[i].thread = XA_NEW_ARGS(MemTag::Default, std::thread, workerThread, this, &m_workers[i]); + m_workers[i].thread = XA_NEW_ARGS(MemTag::Default, std::thread, workerThread, this, &m_workers[i], i + 1); } } @@ -3517,6 +3720,11 @@ public: XA_FREE(m_groups); } + uint32_t threadCount() const + { + return max(1u, std::thread::hardware_concurrency()); // Including the main thread. + } + TaskGroupHandle createTaskGroup(uint32_t reserveSize = 0) { // Claim the first free group. @@ -3581,6 +3789,8 @@ public: handle->value = UINT32_MAX; } + static uint32_t currentThreadIndex() { return m_threadIndex; } + private: struct TaskGroup { @@ -3603,9 +3813,11 @@ private: uint32_t m_maxGroups; Array m_workers; std::atomic m_shutdown; + static thread_local uint32_t m_threadIndex; - static void workerThread(TaskScheduler *scheduler, Worker *worker) + static void workerThread(TaskScheduler *scheduler, Worker *worker, uint32_t threadIndex) { + m_threadIndex = threadIndex; std::unique_lock lock(worker->mutex); for (;;) { worker->cv.wait(lock, [=]{ return worker->wakeup.load(); }); @@ -3636,6 +3848,8 @@ private: } } }; + +thread_local uint32_t TaskScheduler::m_threadIndex; #else class TaskScheduler { @@ -3646,6 +3860,11 @@ public: destroyGroup({ i }); } + uint32_t threadCount() const + { + return 1; + } + TaskGroupHandle createTaskGroup(uint32_t reserveSize = 0) { TaskGroup *group = XA_NEW(MemTag::Default, TaskGroup); @@ -3675,6 +3894,8 @@ public: handle->value = UINT32_MAX; } + static uint32_t currentThreadIndex() { return 0; } + private: void destroyGroup(TaskGroupHandle handle) { @@ -3695,6 +3916,369 @@ private: }; #endif +#if XA_DEBUG_EXPORT_TGA +const uint8_t TGA_TYPE_RGB = 2; +const uint8_t TGA_ORIGIN_UPPER = 0x20; + +#pragma pack(push, 1) +struct TgaHeader +{ + uint8_t id_length; + uint8_t colormap_type; + uint8_t image_type; + uint16_t colormap_index; + uint16_t colormap_length; + uint8_t colormap_size; + uint16_t x_origin; + uint16_t y_origin; + uint16_t width; + uint16_t height; + uint8_t pixel_size; + uint8_t flags; + enum { Size = 18 }; +}; +#pragma pack(pop) + +static void WriteTga(const char *filename, const uint8_t *data, uint32_t width, uint32_t height) +{ + XA_DEBUG_ASSERT(sizeof(TgaHeader) == TgaHeader::Size); + FILE *f; + XA_FOPEN(f, filename, "wb"); + if (!f) + return; + TgaHeader tga; + tga.id_length = 0; + tga.colormap_type = 0; + tga.image_type = TGA_TYPE_RGB; + tga.colormap_index = 0; + tga.colormap_length = 0; + tga.colormap_size = 0; + tga.x_origin = 0; + tga.y_origin = 0; + tga.width = (uint16_t)width; + tga.height = (uint16_t)height; + tga.pixel_size = 24; + tga.flags = TGA_ORIGIN_UPPER; + fwrite(&tga, sizeof(TgaHeader), 1, f); + fwrite(data, sizeof(uint8_t), width * height * 3, f); + fclose(f); +} +#endif + +template +class ThreadLocal +{ +public: + ThreadLocal() + { +#if XA_MULTITHREADED + const uint32_t n = std::thread::hardware_concurrency(); +#else + const uint32_t n = 1; +#endif + m_array = XA_ALLOC_ARRAY(MemTag::Default, T, n); + for (uint32_t i = 0; i < n; i++) + new (&m_array[i]) T; + } + + ~ThreadLocal() + { +#if XA_MULTITHREADED + const uint32_t n = std::thread::hardware_concurrency(); +#else + const uint32_t n = 1; +#endif + for (uint32_t i = 0; i < n; i++) + m_array[i].~T(); + XA_FREE(m_array); + } + + T &get() const + { + return m_array[TaskScheduler::currentThreadIndex()]; + } + +private: + T *m_array; +}; + +class UniformGrid2 +{ +public: + void reset(const Vector2 *positions, const uint32_t *indices = nullptr, uint32_t reserveEdgeCount = 0) + { + m_edges.clear(); + if (reserveEdgeCount > 0) + m_edges.reserve(reserveEdgeCount); + m_positions = positions; + m_indices = indices; + m_cellDataOffsets.clear(); + } + + void append(uint32_t edge) + { + XA_DEBUG_ASSERT(m_cellDataOffsets.isEmpty()); + m_edges.push_back(edge); + } + + bool intersect(Vector2 v1, Vector2 v2, float epsilon) + { + const uint32_t edgeCount = m_edges.size(); + bool bruteForce = edgeCount <= 64; + if (!bruteForce && m_cellDataOffsets.isEmpty()) + bruteForce = !createGrid(); + if (bruteForce) { + for (uint32_t j = 0; j < edgeCount; j++) { + const uint32_t edge = m_edges[j]; + if (linesIntersect(v1, v2, edgePosition0(edge), edgePosition1(edge), epsilon)) + return true; + } + } else { + computePotentialEdges(v1, v2); + uint32_t prevEdge = UINT32_MAX; + for (uint32_t j = 0; j < m_potentialEdges.size(); j++) { + const uint32_t edge = m_potentialEdges[j]; + if (edge == prevEdge) + continue; + if (linesIntersect(v1, v2, edgePosition0(edge), edgePosition1(edge), epsilon)) + return true; + prevEdge = edge; + } + } + return false; + } + + bool intersectSelf(float epsilon) + { + const uint32_t edgeCount = m_edges.size(); + bool bruteForce = edgeCount <= 64; + if (!bruteForce && m_cellDataOffsets.isEmpty()) + bruteForce = !createGrid(); + for (uint32_t i = 0; i < edgeCount; i++) { + const uint32_t edge1 = m_edges[i]; + if (bruteForce) { + for (uint32_t j = 0; j < edgeCount; j++) { + const uint32_t edge2 = m_edges[j]; + if (edgesIntersect(edge1, edge2, epsilon)) + return true; + } + } else { + computePotentialEdges(edgePosition0(edge1), edgePosition1(edge1)); + uint32_t prevEdge = UINT32_MAX; + for (uint32_t j = 0; j < m_potentialEdges.size(); j++) { + const uint32_t edge2 = m_potentialEdges[j]; + if (edge2 == prevEdge) + continue; + if (edgesIntersect(edge1, edge2, epsilon)) + return true; + prevEdge = edge2; + } + } + } + return false; + } + +#if XA_DEBUG_EXPORT_BOUNDARY_GRID + void debugExport(const char *filename) + { + Array image; + image.resize(m_gridWidth * m_gridHeight * 3); + for (uint32_t y = 0; y < m_gridHeight; y++) { + for (uint32_t x = 0; x < m_gridWidth; x++) { + uint8_t *bgr = &image[(x + y * m_gridWidth) * 3]; + bgr[0] = bgr[1] = bgr[2] = 32; + uint32_t offset = m_cellDataOffsets[x + y * m_gridWidth]; + while (offset != UINT32_MAX) { + const uint32_t edge2 = m_cellData[offset]; + srand(edge2); + for (uint32_t i = 0; i < 3; i++) + bgr[i] = uint8_t(bgr[i] * 0.5f + (rand() % 255) * 0.5f); + offset = m_cellData[offset + 1]; + } + } + } + WriteTga(filename, image.data(), m_gridWidth, m_gridHeight); + } +#endif + +private: + bool createGrid() + { + // Compute edge extents. Min will be the grid origin. + const uint32_t edgeCount = m_edges.size(); + Extents2 edgeExtents; + edgeExtents.reset(); + for (uint32_t i = 0; i < edgeCount; i++) { + const uint32_t edge = m_edges[i]; + edgeExtents.add(edgePosition0(edge)); + edgeExtents.add(edgePosition1(edge)); + } + m_gridOrigin = edgeExtents.min; + // Size grid to approximately one edge per cell. + const Vector2 extentsSize(edgeExtents.max - edgeExtents.min); + m_cellSize = min(extentsSize.x, extentsSize.y) / sqrtf((float)edgeCount); + if (m_cellSize <= 0.0f) + return false; + m_gridWidth = uint32_t(ceilf(extentsSize.x / m_cellSize)); + m_gridHeight = uint32_t(ceilf(extentsSize.y / m_cellSize)); + if (m_gridWidth == 0 || m_gridHeight == 0) + return false; + // Insert edges into cells. + m_cellDataOffsets.resize(m_gridWidth * m_gridHeight); + for (uint32_t i = 0; i < m_cellDataOffsets.size(); i++) + m_cellDataOffsets[i] = UINT32_MAX; + m_cellData.clear(); + m_cellData.reserve(edgeCount * 2); + for (uint32_t i = 0; i < edgeCount; i++) { + const uint32_t edge = m_edges[i]; + traverse(edgePosition0(edge), edgePosition1(edge)); + XA_DEBUG_ASSERT(!m_traversedCellOffsets.isEmpty()); + for (uint32_t j = 0; j < m_traversedCellOffsets.size(); j++) { + const uint32_t cell = m_traversedCellOffsets[j]; + uint32_t offset = m_cellDataOffsets[cell]; + if (offset == UINT32_MAX) + m_cellDataOffsets[cell] = m_cellData.size(); + else { + for (;;) { + uint32_t &nextOffset = m_cellData[offset + 1]; + if (nextOffset == UINT32_MAX) { + nextOffset = m_cellData.size(); + break; + } + offset = nextOffset; + } + } + m_cellData.push_back(edge); + m_cellData.push_back(UINT32_MAX); + } + } + return true; + } + + void computePotentialEdges(Vector2 p1, Vector2 p2) + { + m_potentialEdges.clear(); + traverse(p1, p2); + for (uint32_t j = 0; j < m_traversedCellOffsets.size(); j++) { + const uint32_t cell = m_traversedCellOffsets[j]; + uint32_t offset = m_cellDataOffsets[cell]; + while (offset != UINT32_MAX) { + const uint32_t edge2 = m_cellData[offset]; + m_potentialEdges.push_back(edge2); + offset = m_cellData[offset + 1]; + } + } + if (m_potentialEdges.isEmpty()) + return; + insertionSort(m_potentialEdges.data(), m_potentialEdges.size()); + } + + // "A Fast Voxel Traversal Algorithm for Ray Tracing" + void traverse(Vector2 p1, Vector2 p2) + { + const Vector2 dir = p2 - p1; + const Vector2 normal = normalizeSafe(dir, Vector2(0.0f), kEpsilon); + const int stepX = dir.x >= 0 ? 1 : -1; + const int stepY = dir.y >= 0 ? 1 : -1; + const uint32_t firstCell[2] = { cellX(p1.x), cellY(p1.y) }; + const uint32_t lastCell[2] = { cellX(p2.x), cellY(p2.y) }; + float distToNextCellX; + if (stepX == 1) + distToNextCellX = (firstCell[0] + 1) * m_cellSize - (p1.x - m_gridOrigin.x); + else + distToNextCellX = (p1.x - m_gridOrigin.x) - firstCell[0] * m_cellSize; + float distToNextCellY; + if (stepY == 1) + distToNextCellY = (firstCell[1] + 1) * m_cellSize - (p1.y - m_gridOrigin.y); + else + distToNextCellY = (p1.y - m_gridOrigin.y) - firstCell[1] * m_cellSize; + float tMaxX, tMaxY, tDeltaX, tDeltaY; + if (normal.x > kEpsilon || normal.x < -kEpsilon) { + tMaxX = (distToNextCellX * stepX) / normal.x; + tDeltaX = (m_cellSize * stepX) / normal.x; + } + else + tMaxX = tDeltaX = FLT_MAX; + if (normal.y > kEpsilon || normal.y < -kEpsilon) { + tMaxY = (distToNextCellY * stepY) / normal.y; + tDeltaY = (m_cellSize * stepY) / normal.y; + } + else + tMaxY = tDeltaY = FLT_MAX; + m_traversedCellOffsets.clear(); + m_traversedCellOffsets.push_back(firstCell[0] + firstCell[1] * m_gridWidth); + uint32_t currentCell[2] = { firstCell[0], firstCell[1] }; + while (!(currentCell[0] == lastCell[0] && currentCell[1] == lastCell[1])) { + if (tMaxX < tMaxY) { + tMaxX += tDeltaX; + currentCell[0] += stepX; + } else { + tMaxY += tDeltaY; + currentCell[1] += stepY; + } + if (currentCell[0] >= m_gridWidth || currentCell[1] >= m_gridHeight) + break; + if (stepX == 0 && currentCell[0] < lastCell[0]) + break; + if (stepX == 1 && currentCell[0] > lastCell[0]) + break; + if (stepY == 0 && currentCell[1] < lastCell[1]) + break; + if (stepY == 1 && currentCell[1] > lastCell[1]) + break; + m_traversedCellOffsets.push_back(currentCell[0] + currentCell[1] * m_gridWidth); + } + } + + bool edgesIntersect(uint32_t edge1, uint32_t edge2, float epsilon) const + { + if (edge1 == edge2) + return false; + const uint32_t ai[2] = { vertexAt(meshEdgeIndex0(edge1)), vertexAt(meshEdgeIndex1(edge1)) }; + const uint32_t bi[2] = { vertexAt(meshEdgeIndex0(edge2)), vertexAt(meshEdgeIndex1(edge2)) }; + // Ignore connected edges, since they can't intersect (only overlap), and may be detected as false positives. + if (ai[0] == bi[0] || ai[0] == bi[1] || ai[1] == bi[0] || ai[1] == bi[1]) + return false; + return linesIntersect(m_positions[ai[0]], m_positions[ai[1]], m_positions[bi[0]], m_positions[bi[1]], epsilon); + } + + uint32_t cellX(float x) const + { + return min((uint32_t)max(0.0f, (x - m_gridOrigin.x) / m_cellSize), m_gridWidth - 1u); + } + + uint32_t cellY(float y) const + { + return min((uint32_t)max(0.0f, (y - m_gridOrigin.y) / m_cellSize), m_gridHeight - 1u); + } + + Vector2 edgePosition0(uint32_t edge) const + { + return m_positions[vertexAt(meshEdgeIndex0(edge))]; + } + + Vector2 edgePosition1(uint32_t edge) const + { + return m_positions[vertexAt(meshEdgeIndex1(edge))]; + } + + uint32_t vertexAt(uint32_t index) const + { + return m_indices ? m_indices[index] : index; + } + + Array m_edges; + const Vector2 *m_positions; + const uint32_t *m_indices; // Optional + float m_cellSize; + Vector2 m_gridOrigin; + uint32_t m_gridWidth, m_gridHeight; // in cells + Array m_cellDataOffsets; + Array m_cellData; + Array m_potentialEdges; + Array m_traversedCellOffsets; +}; + struct UvMeshChart { Array faces; @@ -3834,15 +4418,16 @@ struct Triangle // make sure every triangle is front facing. flipBackface(); // Compute deltas. - computeUnitInwardNormals(); + if (isValid()) + computeUnitInwardNormals(); } bool isValid() { const Vector2 e0 = v3 - v1; const Vector2 e1 = v2 - v1; - const float denom = 1.0f / (e0.y * e1.x - e1.y * e0.x); - return isFinite(denom); + const float area = e0.y * e1.x - e1.y * e0.x; + return area != 0.0f; } // extents has to be multiple of BK_SIZE!! @@ -3926,6 +4511,7 @@ struct Triangle return true; } +private: void flipBackface() { // check if triangle is backfacing, if so, swap two vertices @@ -3941,13 +4527,13 @@ struct Triangle { n1 = v1 - v2; n1 = Vector2(-n1.y, n1.x); - n1 = n1 * (1.0f / sqrtf(n1.x * n1.x + n1.y * n1.y)); + n1 = n1 * (1.0f / sqrtf(dot(n1, n1))); n2 = v2 - v3; n2 = Vector2(-n2.y, n2.x); - n2 = n2 * (1.0f / sqrtf(n2.x * n2.x + n2.y * n2.y)); + n2 = n2 * (1.0f / sqrtf(dot(n2, n2))); n3 = v3 - v1; n3 = Vector2(-n3.y, n3.x); - n3 = n3 * (1.0f / sqrtf(n3.x * n3.x + n3.y * n3.y)); + n3 = n3 * (1.0f / sqrtf(dot(n3, n3))); } // Vertices. @@ -3990,28 +4576,33 @@ public: float v; // value }; - Matrix(uint32_t d) : m_width(d) + Matrix(uint32_t d) : m_width(d), m_array(MemTag::Matrix) { m_array.resize(d); - for (uint32_t i = 0; i < m_array.size(); i++) - new (&m_array[i]) Array(); + m_array.runCtors(); +#if XA_DEBUG_HEAP + for (uint32_t i = 0; i < d; i++) + m_array[i].setMemTag(MemTag::Matrix); +#endif } - Matrix(uint32_t w, uint32_t h) : m_width(w) + Matrix(uint32_t w, uint32_t h) : m_width(w), m_array(MemTag::Matrix) { m_array.resize(h); - for (uint32_t i = 0; i < m_array.size(); i++) - new (&m_array[i]) Array(); + m_array.runCtors(); +#if XA_DEBUG_HEAP + for (uint32_t i = 0; i < h; i++) + m_array[i].setMemTag(MemTag::Matrix); +#endif } ~Matrix() { - for (uint32_t i = 0; i < m_array.size(); i++) - m_array[i].~Array(); + m_array.runDtors(); } Matrix(const Matrix &m) = delete; - const Matrix &operator=(const Matrix &m) = delete; + Matrix &operator=(const Matrix &m) = delete; uint32_t width() const { return m_width; } uint32_t height() const { return m_array.size(); } bool isSquare() const { return width() == height(); } @@ -4211,164 +4802,164 @@ static void mult(const Matrix &A, const Matrix &B, Matrix &C) namespace segment { -// Dummy implementation of a priority queue using sort at insertion. // - Insertion is o(n) // - Smallest element goes at the end, so that popping it is o(1). -// - Resorting is n*log(n) -// @@ Number of elements in the queue is usually small, and we'd have to rebalance often. I'm not sure it's worth implementing a heap. -// @@ Searcing at removal would remove the need for sorting when priorities change. -struct PriorityQueue +struct CostQueue { - PriorityQueue(uint32_t size = UINT32_MAX) : maxSize(size) {} + CostQueue(uint32_t size = UINT32_MAX) : m_maxSize(size), m_pairs(MemTag::SegmentAtlasChartCandidates) {} - void push(float priority, uint32_t face) + float peekCost() const { - uint32_t i = 0; - const uint32_t count = pairs.size(); - for (; i < count; i++) { - if (pairs[i].priority > priority) break; - } - Pair p = { priority, face }; - pairs.insertAt(i, p); - if (pairs.size() > maxSize) - pairs.removeAt(0); + return m_pairs.back().cost; } - // push face out of order, to be sorted later. - void push(uint32_t face) + uint32_t peekFace() const { - Pair p = { 0.0f, face }; - pairs.push_back(p); + return m_pairs.back().face; + } + + void push(float cost, uint32_t face) + { + const Pair p = { cost, face }; + if (m_pairs.isEmpty() || cost < peekCost()) + m_pairs.push_back(p); + else { + uint32_t i = 0; + const uint32_t count = m_pairs.size(); + for (; i < count; i++) { + if (m_pairs[i].cost < cost) + break; + } + m_pairs.insertAt(i, p); + if (m_pairs.size() > m_maxSize) + m_pairs.removeAt(0); + } } uint32_t pop() { - XA_DEBUG_ASSERT(!pairs.isEmpty()); - uint32_t f = pairs.back().face; - pairs.pop_back(); + XA_DEBUG_ASSERT(!m_pairs.isEmpty()); + uint32_t f = m_pairs.back().face; + m_pairs.pop_back(); return f; } - void sort() - { - //sort(pairs); // @@ My intro sort appears to be much slower than it should! - std::sort(pairs.begin(), pairs.end()); - } - XA_INLINE void clear() { - pairs.clear(); + m_pairs.clear(); } XA_INLINE uint32_t count() const { - return pairs.size(); + return m_pairs.size(); } - float firstPriority() const - { - return pairs.back().priority; - } - - const uint32_t maxSize; +private: + const uint32_t m_maxSize; struct Pair { - bool operator<(const Pair &p) const - { - return priority > p.priority; // !! Sort in inverse priority order! - } - - float priority; + float cost; uint32_t face; }; - Array pairs; + Array m_pairs; }; struct Chart { + Chart() : faces(MemTag::SegmentAtlasChartFaces) {} + int id = -1; - Vector3 averageNormal = Vector3(0.0f); + Basis basis; // Best fit normal. float area = 0.0f; float boundaryLength = 0.0f; - Vector3 normalSum = Vector3(0.0f); Vector3 centroidSum = Vector3(0.0f); // Sum of chart face centroids. Vector3 centroid = Vector3(0.0f); // Average centroid of chart faces. Array seeds; Array faces; - PriorityQueue candidates; - Basis basis; // Of first face. + Array failedPlanarRegions; + CostQueue candidates; }; struct Atlas { - // @@ Hardcoded to 10? - Atlas(const Mesh *mesh, Array *meshFaces, const ChartOptions &options) : m_mesh(mesh), m_meshFaces(meshFaces), m_facesLeft(mesh->faceCount()), m_bestTriangles(10), m_options(options) + Atlas() : m_edgeLengths(MemTag::SegmentAtlasMeshData), m_faceAreas(MemTag::SegmentAtlasMeshData), m_faceNormals(MemTag::SegmentAtlasMeshData), m_texcoords(MemTag::SegmentAtlasMeshData), m_bestTriangles(10), m_nextPlanarRegionFace(MemTag::SegmentAtlasPlanarRegions), m_facePlanarRegionId(MemTag::SegmentAtlasPlanarRegions) {} + + ~Atlas() { - XA_PROFILE_START(buildAtlasInit) - const uint32_t faceCount = m_mesh->faceCount(); - if (meshFaces) { - m_ignoreFaces.resize(faceCount); - m_ignoreFaces.setAll(true); - for (uint32_t f = 0; f < meshFaces->size(); f++) - m_ignoreFaces[(*meshFaces)[f]] = false; - m_facesLeft = meshFaces->size(); - } else { - m_ignoreFaces.resize(faceCount); - m_ignoreFaces.setAll(false); + const uint32_t chartCount = m_charts.size(); + for (uint32_t i = 0; i < chartCount; i++) { + m_charts[i]->~Chart(); + XA_FREE(m_charts[i]); } - m_faceChartArray.resize(faceCount); - m_faceChartArray.setAll(-1); - m_faceCandidateCharts.resize(faceCount); - m_faceCandidateCosts.resize(faceCount); + } + + uint32_t facesLeft() const { return m_facesLeft; } + uint32_t chartCount() const { return m_charts.size(); } + const Array &chartFaces(uint32_t i) const { return m_charts[i]->faces; } + const Basis &chartBasis(uint32_t chartIndex) const { return m_charts[chartIndex]->basis; } + + void reset(uint32_t meshId, uint32_t chartGroupId, const Mesh *mesh, const ChartOptions &options) + { + XA_UNUSED(meshId); + XA_UNUSED(chartGroupId); + XA_PROFILE_START(buildAtlasInit) + m_mesh = mesh; + const uint32_t faceCount = m_mesh->faceCount(); + m_facesLeft = faceCount; + m_options = options; + m_rand.reset(); + const uint32_t chartCount = m_charts.size(); + for (uint32_t i = 0; i < chartCount; i++) { + m_charts[i]->~Chart(); + XA_FREE(m_charts[i]); + } + m_charts.clear(); + m_faceCharts.resize(faceCount); + m_faceCharts.setAll(-1); m_texcoords.resize(faceCount * 3); - // @@ Floyd for the whole mesh is too slow. We could compute floyd progressively per patch as the patch grows. We need a better solution to compute most central faces. - //computeShortestPaths(); // Precompute edge lengths and face areas. const uint32_t edgeCount = m_mesh->edgeCount(); m_edgeLengths.resize(edgeCount); - m_edgeLengths.zeroOutMemory(); m_faceAreas.resize(faceCount); - m_faceAreas.zeroOutMemory(); m_faceNormals.resize(faceCount); - m_faceTangents.resize(faceCount); - m_faceBitangents.resize(faceCount); for (uint32_t f = 0; f < faceCount; f++) { - if (m_ignoreFaces[f]) - continue; - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - m_edgeLengths[it.edge()] = internal::length(it.position1() - it.position0()); - XA_DEBUG_ASSERT(m_edgeLengths[it.edge()] > 0.0f); + for (uint32_t i = 0; i < 3; i++) { + const uint32_t edge = f * 3 + i; + const Vector3 &p0 = mesh->position(m_mesh->vertexAt(meshEdgeIndex0(edge))); + const Vector3 &p1 = mesh->position(m_mesh->vertexAt(meshEdgeIndex1(edge))); + m_edgeLengths[edge] = length(p1 - p0); + XA_DEBUG_ASSERT(m_edgeLengths[edge] > 0.0f); } - m_faceAreas[f] = mesh->faceArea(f); + m_faceAreas[f] = m_mesh->computeFaceArea(f); XA_DEBUG_ASSERT(m_faceAreas[f] > 0.0f); - m_faceNormals[f] = m_mesh->triangleNormal(f); - m_faceTangents[f] = Basis::computeTangent(m_faceNormals[f]); - m_faceBitangents[f] = Basis::computeBitangent(m_faceNormals[f], m_faceTangents[f]); + m_faceNormals[f] = m_mesh->computeFaceNormal(f); } -#if XA_GROW_CHARTS_COPLANAR // Precompute regions of coplanar incident faces. m_nextPlanarRegionFace.resize(faceCount); - for (uint32_t f = 0; f < faceCount; f++) + m_facePlanarRegionId.resize(faceCount); + for (uint32_t f = 0; f < faceCount; f++) { m_nextPlanarRegionFace[f] = f; + m_facePlanarRegionId[f] = UINT32_MAX; + } Array faceStack; faceStack.reserve(min(faceCount, 16u)); + uint32_t planarRegionCount = 0; for (uint32_t f = 0; f < faceCount; f++) { if (m_nextPlanarRegionFace[f] != f) continue; // Already assigned. - if (m_ignoreFaces[f]) - continue; faceStack.clear(); faceStack.push_back(f); for (;;) { if (faceStack.isEmpty()) break; const uint32_t face = faceStack.back(); + m_facePlanarRegionId[face] = planarRegionCount; faceStack.pop_back(); for (Mesh::FaceEdgeIterator it(m_mesh, face); !it.isDone(); it.advance()) { const uint32_t oface = it.oppositeFace(); - if (it.isBoundary() || m_ignoreFaces[oface]) + if (it.isBoundary()) continue; if (m_nextPlanarRegionFace[oface] != oface) continue; // Already assigned. @@ -4377,29 +4968,33 @@ struct Atlas const uint32_t next = m_nextPlanarRegionFace[face]; m_nextPlanarRegionFace[face] = oface; m_nextPlanarRegionFace[oface] = next; + m_facePlanarRegionId[oface] = planarRegionCount; faceStack.push_back(oface); } } + planarRegionCount++; + } +#if XA_DEBUG_EXPORT_OBJ_PLANAR_REGIONS + char filename[256]; + XA_SPRINTF(filename, sizeof(filename), "debug_mesh_%03u_chartgroup_%03u_planar_regions.obj", meshId, chartGroupId); + FILE *file; + XA_FOPEN(file, filename, "w"); + if (file) { + m_mesh->writeObjVertices(file); + fprintf(file, "s off\n"); + for (uint32_t i = 0; i < planarRegionCount; i++) { + fprintf(file, "o region%u\n", i); + for (uint32_t j = 0; j < faceCount; j++) { + if (m_facePlanarRegionId[j] == i) + m_mesh->writeObjFace(file, j); + } + } + fclose(file); } #endif XA_PROFILE_END(buildAtlasInit) } - ~Atlas() - { - const uint32_t chartCount = m_chartArray.size(); - for (uint32_t i = 0; i < chartCount; i++) { - m_chartArray[i]->~Chart(); - XA_FREE(m_chartArray[i]); - } - } - - uint32_t facesLeft() const { return m_facesLeft; } - uint32_t chartCount() const { return m_chartArray.size(); } - const Array &chartFaces(uint32_t i) const { return m_chartArray[i]->faces; } - const Basis &chartBasis(uint32_t chartIndex) const { return m_chartArray[chartIndex]->basis; } - const Vector2 *faceTexcoords(uint32_t face) const { return &m_texcoords[face * 3]; } - void placeSeeds(float threshold) { XA_PROFILE_START(buildAtlasPlaceSeeds) @@ -4415,28 +5010,51 @@ struct Atlas } // Returns true if any of the charts can grow more. - bool growCharts(float threshold) + void growCharts(float threshold) { XA_PROFILE_START(buildAtlasGrowCharts) - // Build global candidate list. - m_faceCandidateCharts.zeroOutMemory(); - for (uint32_t i = 0; i < m_chartArray.size(); i++) - addChartCandidateToGlobalCandidates(m_chartArray[i]); - // Add one candidate face per chart (threshold permitting). - const uint32_t faceCount = m_mesh->faceCount(); - bool canAddAny = false; - for (uint32_t f = 0; f < faceCount; f++) { - Chart *chart = m_faceCandidateCharts[f]; - if (!chart || m_faceCandidateCosts[f] > threshold) - continue; - createFaceTexcoords(chart, f); - if (!canAddFaceToChart(chart, f)) - continue; - addFaceToChart(chart, f); - canAddAny = true; + for (;;) { + if (m_facesLeft == 0) + break; + // Get the single best candidate out of the chart best candidates. + uint32_t bestFace = UINT32_MAX, bestChart = UINT32_MAX; + float lowestCost = FLT_MAX; + for (uint32_t i = 0; i < m_charts.size(); i++) { + Chart *chart = m_charts[i]; + // Get the best candidate from the chart. + // Cleanup any best candidates that have been claimed by another chart. + uint32_t face = UINT32_MAX; + float cost = FLT_MAX; + for (;;) { + if (chart->candidates.count() == 0) + break; + cost = chart->candidates.peekCost(); + face = chart->candidates.peekFace(); + if (m_faceCharts[face] == -1) + break; + else { + // Face belongs to another chart. Pop from queue so the next best candidate can be retrieved. + chart->candidates.pop(); + face = UINT32_MAX; + } + } + if (face == UINT32_MAX) + continue; // No candidates for this chart. + // See if best candidate overall. + if (cost < lowestCost) { + lowestCost = cost; + bestFace = face; + bestChart = i; + } + } + if (bestFace == UINT32_MAX || lowestCost > threshold) + break; + Chart *chart = m_charts[bestChart]; + chart->candidates.pop(); // Pop the selected candidate from the queue. + if (!addFaceToChart(chart, bestFace)) + chart->failedPlanarRegions.push_back(m_facePlanarRegionId[bestFace]); } XA_PROFILE_END(buildAtlasGrowCharts) - return canAddAny && m_facesLeft != 0; // Can continue growing. } void resetCharts() @@ -4444,53 +5062,34 @@ struct Atlas XA_PROFILE_START(buildAtlasResetCharts) const uint32_t faceCount = m_mesh->faceCount(); for (uint32_t i = 0; i < faceCount; i++) - m_faceChartArray[i] = -1; - m_facesLeft = m_meshFaces ? m_meshFaces->size() : faceCount; - const uint32_t chartCount = m_chartArray.size(); + m_faceCharts[i] = -1; + m_facesLeft = faceCount; + const uint32_t chartCount = m_charts.size(); for (uint32_t i = 0; i < chartCount; i++) { - Chart *chart = m_chartArray[i]; + Chart *chart = m_charts[i]; const uint32_t seed = chart->seeds.back(); chart->area = 0.0f; chart->boundaryLength = 0.0f; - chart->normalSum = Vector3(0.0f); + chart->basis.normal = Vector3(0.0f); + chart->basis.tangent = Vector3(0.0f); + chart->basis.bitangent = Vector3(0.0f); chart->centroidSum = Vector3(0.0f); chart->centroid = Vector3(0.0f); chart->faces.clear(); chart->candidates.clear(); + chart->failedPlanarRegions.clear(); addFaceToChart(chart, seed); } -#if XA_GROW_CHARTS_COPLANAR - for (uint32_t i = 0; i < chartCount; i++) { - Chart *chart = m_chartArray[i]; - growChartCoplanar(chart); - } -#endif XA_PROFILE_END(buildAtlasResetCharts) } - void updateChartCandidates(Chart *chart, uint32_t f) - { - // Traverse neighboring faces, add the ones that do not belong to any chart yet. - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - if (!it.isBoundary() && !m_ignoreFaces[it.oppositeFace()] && m_faceChartArray[it.oppositeFace()] == -1) - chart->candidates.push(it.oppositeFace()); - } - // Re-evaluate all candidate priorities. - uint32_t candidateCount = chart->candidates.count(); - for (uint32_t i = 0; i < candidateCount; i++) { - PriorityQueue::Pair &pair = chart->candidates.pairs[i]; - pair.priority = evaluateCost(chart, pair.face); - } - chart->candidates.sort(); - } - bool relocateSeeds() { XA_PROFILE_START(buildAtlasRelocateSeeds) bool anySeedChanged = false; - const uint32_t chartCount = m_chartArray.size(); + const uint32_t chartCount = m_charts.size(); for (uint32_t i = 0; i < chartCount; i++) { - if (relocateSeed(m_chartArray[i])) { + if (relocateSeed(m_charts[i])) { anySeedChanged = true; } } @@ -4510,45 +5109,38 @@ struct Atlas void mergeCharts() { XA_PROFILE_START(buildAtlasMergeCharts) - Array sharedBoundaryLengths; - Array sharedBoundaryLengthsNoSeams; - Array sharedBoundaryEdgeCountNoSeams; - Array tempTexcoords; - const uint32_t chartCount = m_chartArray.size(); + const uint32_t chartCount = m_charts.size(); // Merge charts progressively until there's none left to merge. for (;;) { bool merged = false; for (int c = chartCount - 1; c >= 0; c--) { - Chart *chart = m_chartArray[c]; + Chart *chart = m_charts[c]; if (chart == nullptr) continue; float externalBoundaryLength = 0.0f; - sharedBoundaryLengths.clear(); - sharedBoundaryLengths.resize(chartCount); - sharedBoundaryLengths.zeroOutMemory(); - sharedBoundaryLengthsNoSeams.clear(); - sharedBoundaryLengthsNoSeams.resize(chartCount); - sharedBoundaryLengthsNoSeams.zeroOutMemory(); - sharedBoundaryEdgeCountNoSeams.clear(); - sharedBoundaryEdgeCountNoSeams.resize(chartCount); - sharedBoundaryEdgeCountNoSeams.zeroOutMemory(); + m_sharedBoundaryLengths.resize(chartCount); + m_sharedBoundaryLengths.zeroOutMemory(); + m_sharedBoundaryLengthsNoSeams.resize(chartCount); + m_sharedBoundaryLengthsNoSeams.zeroOutMemory(); + m_sharedBoundaryEdgeCountNoSeams.resize(chartCount); + m_sharedBoundaryEdgeCountNoSeams.zeroOutMemory(); const uint32_t faceCount = chart->faces.size(); for (uint32_t i = 0; i < faceCount; i++) { const uint32_t f = chart->faces[i]; for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { const float l = m_edgeLengths[it.edge()]; - if (it.isBoundary() || m_ignoreFaces[it.oppositeFace()]) { + if (it.isBoundary()) { externalBoundaryLength += l; } else { - const int neighborChart = m_faceChartArray[it.oppositeFace()]; - if (m_chartArray[neighborChart] != chart) { + const int neighborChart = m_faceCharts[it.oppositeFace()]; + if (m_charts[neighborChart] != chart) { if ((it.isSeam() && (isNormalSeam(it.edge()) || it.isTextureSeam()))) { externalBoundaryLength += l; } else { - sharedBoundaryLengths[neighborChart] += l; + m_sharedBoundaryLengths[neighborChart] += l; } - sharedBoundaryLengthsNoSeams[neighborChart] += l; - sharedBoundaryEdgeCountNoSeams[neighborChart]++; + m_sharedBoundaryLengthsNoSeams[neighborChart] += l; + m_sharedBoundaryEdgeCountNoSeams[neighborChart]++; } } } @@ -4556,50 +5148,38 @@ struct Atlas for (int cc = chartCount - 1; cc >= 0; cc--) { if (cc == c) continue; - Chart *chart2 = m_chartArray[cc]; + Chart *chart2 = m_charts[cc]; if (chart2 == nullptr) continue; + // Must share a boundary. + if (m_sharedBoundaryLengths[cc] <= 0.0f) + continue; // Compare proxies. - if (dot(chart2->averageNormal, chart->averageNormal) < XA_MERGE_CHARTS_MIN_NORMAL_DEVIATION) + if (dot(chart2->basis.normal, chart->basis.normal) < XA_MERGE_CHARTS_MIN_NORMAL_DEVIATION) continue; // Obey max chart area and boundary length. if (m_options.maxChartArea > 0.0f && chart->area + chart2->area > m_options.maxChartArea) continue; - if (m_options.maxBoundaryLength > 0.0f && chart->boundaryLength + chart2->boundaryLength - sharedBoundaryLengthsNoSeams[cc] > m_options.maxBoundaryLength) + if (m_options.maxBoundaryLength > 0.0f && chart->boundaryLength + chart2->boundaryLength - m_sharedBoundaryLengthsNoSeams[cc] > m_options.maxBoundaryLength) continue; // Merge if chart2 has a single face. // chart1 must have more than 1 face. // chart2 area must be <= 10% of chart1 area. - if (sharedBoundaryLengthsNoSeams[cc] > 0.0f && chart->faces.size() > 1 && chart2->faces.size() == 1 && chart2->area <= chart->area * 0.1f) + if (m_sharedBoundaryLengthsNoSeams[cc] > 0.0f && chart->faces.size() > 1 && chart2->faces.size() == 1 && chart2->area <= chart->area * 0.1f) goto merge; // Merge if chart2 has two faces (probably a quad), and chart1 bounds at least 2 of its edges. - if (chart2->faces.size() == 2 && sharedBoundaryEdgeCountNoSeams[cc] >= 2) + if (chart2->faces.size() == 2 && m_sharedBoundaryEdgeCountNoSeams[cc] >= 2) goto merge; // Merge if chart2 is wholely inside chart1, ignoring seams. - if (sharedBoundaryLengthsNoSeams[cc] > 0.0f && equal(sharedBoundaryLengthsNoSeams[cc], chart2->boundaryLength, kEpsilon)) + if (m_sharedBoundaryLengthsNoSeams[cc] > 0.0f && equal(m_sharedBoundaryLengthsNoSeams[cc], chart2->boundaryLength, kEpsilon)) goto merge; - if (sharedBoundaryLengths[cc] > 0.2f * max(0.0f, chart->boundaryLength - externalBoundaryLength) || - sharedBoundaryLengths[cc] > 0.75f * chart2->boundaryLength) + if (m_sharedBoundaryLengths[cc] > 0.2f * max(0.0f, chart->boundaryLength - externalBoundaryLength) || + m_sharedBoundaryLengths[cc] > 0.75f * chart2->boundaryLength) goto merge; continue; merge: - // Create texcoords for chart 2 using chart 1 basis. Backup chart 2 texcoords for restoration if charts cannot be merged. - tempTexcoords.resize(chart2->faces.size() * 3); - for (uint32_t i = 0; i < chart2->faces.size(); i++) { - const uint32_t face = chart2->faces[i]; - for (uint32_t j = 0; j < 3; j++) - tempTexcoords[i * 3 + j] = m_texcoords[face * 3 + j]; - createFaceTexcoords(chart, face); - } - if (!canMergeCharts(chart, chart2)) { - // Restore chart 2 texcoords. - for (uint32_t i = 0; i < chart2->faces.size(); i++) { - for (uint32_t j = 0; j < 3; j++) - m_texcoords[chart2->faces[i] * 3 + j] = tempTexcoords[i * 3 + j]; - } + if (!mergeChart(chart, chart2, m_sharedBoundaryLengthsNoSeams[cc])) continue; - } - mergeChart(chart, chart2, sharedBoundaryLengthsNoSeams[cc]); merged = true; break; } @@ -4610,20 +5190,20 @@ struct Atlas break; } // Remove deleted charts. - for (int c = 0; c < int32_t(m_chartArray.size()); /*do not increment if removed*/) { - if (m_chartArray[c] == nullptr) { - m_chartArray.removeAt(c); - // Update m_faceChartArray. - const uint32_t faceCount = m_faceChartArray.size(); + for (int c = 0; c < int32_t(m_charts.size()); /*do not increment if removed*/) { + if (m_charts[c] == nullptr) { + m_charts.removeAt(c); + // Update m_faceCharts. + const uint32_t faceCount = m_faceCharts.size(); for (uint32_t i = 0; i < faceCount; i++) { - XA_DEBUG_ASSERT(m_faceChartArray[i] != c); - XA_DEBUG_ASSERT(m_faceChartArray[i] <= int32_t(m_chartArray.size())); - if (m_faceChartArray[i] > c) { - m_faceChartArray[i]--; + XA_DEBUG_ASSERT(m_faceCharts[i] != c); + XA_DEBUG_ASSERT(m_faceCharts[i] <= int32_t(m_charts.size())); + if (m_faceCharts[i] > c) { + m_faceCharts[i]--; } } } else { - m_chartArray[c]->id = c; + m_charts[c]->id = c; c++; } } @@ -4635,264 +5215,204 @@ private: void createRandomChart(float threshold) { Chart *chart = XA_NEW(MemTag::Default, Chart); - chart->id = (int)m_chartArray.size(); - m_chartArray.push_back(chart); + chart->id = (int)m_charts.size(); + m_charts.push_back(chart); // Pick random face that is not used by any chart yet. uint32_t face = m_rand.getRange(m_mesh->faceCount() - 1); - while (m_ignoreFaces[face] || m_faceChartArray[face] != -1) { + while (m_faceCharts[face] != -1) { if (++face >= m_mesh->faceCount()) face = 0; } chart->seeds.push_back(face); addFaceToChart(chart, face); -#if XA_GROW_CHARTS_COPLANAR - growChartCoplanar(chart); -#endif // Grow the chart as much as possible within the given threshold. - for (uint32_t i = 0; i < m_facesLeft; ) { - if (chart->candidates.count() == 0 || chart->candidates.firstPriority() > threshold) + for (;;) { + if (chart->candidates.count() == 0 || chart->candidates.peekCost() > threshold) break; const uint32_t f = chart->candidates.pop(); - if (m_faceChartArray[f] != -1) + if (m_faceCharts[f] != -1) continue; - createFaceTexcoords(chart, f); - if (!canAddFaceToChart(chart, f)) + if (!addFaceToChart(chart, f)) { + chart->failedPlanarRegions.push_back(m_facePlanarRegionId[f]); continue; - addFaceToChart(chart, f); - i++; - } - } - - void addChartCandidateToGlobalCandidates(Chart *chart) - { - if (chart->candidates.count() == 0) - return; - const float cost = chart->candidates.firstPriority(); - const uint32_t face = chart->candidates.pop(); - if (m_faceChartArray[face] != -1) { - addChartCandidateToGlobalCandidates(chart); - } else if (!m_faceCandidateCharts[face]) { - // No candidate assigned to this face yet. - m_faceCandidateCharts[face] = chart; - m_faceCandidateCosts[face] = cost; - } else { - if (cost < m_faceCandidateCosts[face]) { - // This is a better candidate for this face (lower cost). The other chart can choose another candidate. - Chart *otherChart = m_faceCandidateCharts[face]; - m_faceCandidateCharts[face] = chart; - m_faceCandidateCosts[face] = cost; - addChartCandidateToGlobalCandidates(otherChart); - } else { - // Existing candidate is better. This chart can choose another candidate. - addChartCandidateToGlobalCandidates(chart); } } } - void createFaceTexcoords(Chart *chart, uint32_t face) - { - for (uint32_t i = 0; i < 3; i++) { - const Vector3 &pos = m_mesh->position(m_mesh->vertexAt(face * 3 + i)); - m_texcoords[face * 3 + i] = Vector2(dot(chart->basis.tangent, pos), dot(chart->basis.bitangent, pos)); - } - } - bool isChartBoundaryEdge(const Chart *chart, uint32_t edge) const { const uint32_t oppositeEdge = m_mesh->oppositeEdge(edge); const uint32_t oppositeFace = meshEdgeFace(oppositeEdge); - return oppositeEdge == UINT32_MAX || m_ignoreFaces[oppositeFace] || m_faceChartArray[oppositeFace] != chart->id; + return oppositeEdge == UINT32_MAX || m_faceCharts[oppositeFace] != chart->id; } - bool edgeArraysIntersect(const uint32_t *edges1, uint32_t edges1Count, const uint32_t *edges2, uint32_t edges2Count) + bool computeChartBasis(Chart *chart, Basis *basis) { - for (uint32_t i = 0; i < edges1Count; i++) { - const uint32_t edge1 = edges1[i]; - for (uint32_t j = 0; j < edges2Count; j++) { - const uint32_t edge2 = edges2[j]; - const Vector2 &a1 = m_texcoords[meshEdgeIndex0(edge1)]; - const Vector2 &a2 = m_texcoords[meshEdgeIndex1(edge1)]; - const Vector2 &b1 = m_texcoords[meshEdgeIndex0(edge2)]; - const Vector2 &b2 = m_texcoords[meshEdgeIndex1(edge2)]; - if (linesIntersect(a1, a2, b1, b2, m_mesh->epsilon())) - return true; - } + const uint32_t faceCount = chart->faces.size(); + m_tempPoints.resize(chart->faces.size() * 3); + for (uint32_t i = 0; i < faceCount; i++) { + const uint32_t f = chart->faces[i]; + for (uint32_t j = 0; j < 3; j++) + m_tempPoints[i * 3 + j] = m_mesh->position(m_mesh->vertexAt(f * 3 + j)); } - return false; + return Fit::computeBasis(m_tempPoints.data(), m_tempPoints.size(), basis); } bool isFaceFlipped(uint32_t face) const { - const float t1 = m_texcoords[face * 3 + 0].x; - const float s1 = m_texcoords[face * 3 + 0].y; - const float t2 = m_texcoords[face * 3 + 1].x; - const float s2 = m_texcoords[face * 3 + 1].y; - const float t3 = m_texcoords[face * 3 + 2].x; - const float s3 = m_texcoords[face * 3 + 2].y; - const float parametricArea = ((s2 - s1) * (t3 - t1) - (s3 - s1) * (t2 - t1)) / 2; + const Vector2 &v1 = m_texcoords[face * 3 + 0]; + const Vector2 &v2 = m_texcoords[face * 3 + 1]; + const Vector2 &v3 = m_texcoords[face * 3 + 2]; + const float parametricArea = ((v2.x - v1.x) * (v3.y - v1.y) - (v3.x - v1.x) * (v2.y - v1.y)) * 0.5f; return parametricArea < 0.0f; } - void computeChartBoundaryEdges(const Chart *chart, Array *dest) const + void parameterizeChart(const Chart *chart) { - dest->clear(); - for (uint32_t f = 0; f < chart->faces.size(); f++) { - const uint32_t face = chart->faces[f]; - for (uint32_t i = 0; i < 3; i++) { - const uint32_t edge = face * 3 + i; - if (isChartBoundaryEdge(chart, edge)) - dest->push_back(edge); - } - } - } - - bool canAddFaceToChart(Chart *chart, uint32_t face) - { - // Check for flipped triangles. - if (isFaceFlipped(face)) - return false; - // Find face edges that don't border this chart. - m_tempEdges1.clear(); - for (uint32_t i = 0; i < 3; i++) { - const uint32_t edge = face * 3 + i; - if (isChartBoundaryEdge(chart, edge)) - m_tempEdges1.push_back(edge); - } - if (m_tempEdges1.isEmpty()) - return true; // This can happen if the face is surrounded by the chart. - // Get chart boundary edges, except those that border the face. - m_tempEdges2.clear(); - for (uint32_t i = 0; i < chart->faces.size(); i++) { - const uint32_t chartFace = chart->faces[i]; + const uint32_t faceCount = chart->faces.size(); + for (uint32_t i = 0; i < faceCount; i++) { + const uint32_t face = chart->faces[i]; for (uint32_t j = 0; j < 3; j++) { - const uint32_t chartEdge = chartFace * 3 + j; - if (!isChartBoundaryEdge(chart, chartEdge)) - continue; - // Don't check chart boundary edges that border the face. - const uint32_t oppositeChartEdge = m_mesh->oppositeEdge(chartEdge); - if (meshEdgeFace(oppositeChartEdge) == face) - continue; - m_tempEdges2.push_back(chartEdge); + const uint32_t offset = face * 3 + j; + const Vector3 &pos = m_mesh->position(m_mesh->vertexAt(offset)); + m_texcoords[offset] = Vector2(dot(chart->basis.tangent, pos), dot(chart->basis.bitangent, pos)); } } - const bool intersect = edgeArraysIntersect(m_tempEdges1.data(), m_tempEdges1.size(), m_tempEdges2.data(), m_tempEdges2.size()); -#if 0 - if (intersect) { - static std::atomic count = 0; - char filename[256]; - XA_SPRINTF(filename, sizeof(filename), "intersect%04u.obj", count.fetch_add(1)); - FILE *file; - XA_FOPEN(file, filename, "w"); - if (file) { - for (uint32_t i = 0; i < m_texcoords.size(); i++) - fprintf(file, "v %g %g 0.0\n", m_texcoords[i].x, m_texcoords[i].y); - fprintf(file, "s off\n"); - fprintf(file, "o face\n"); - { - fprintf(file, "f "); - for (uint32_t j = 0; j < 3; j++) { - const uint32_t index = face * 3 + j + 1; // 1-indexed - fprintf(file, "%d/%d/%d%c", index, index, index, j == 2 ? '\n' : ' '); - } - } - fprintf(file, "s off\n"); - fprintf(file, "o chart\n"); - for (uint32_t i = 0; i < chart->faces.size(); i++) { - const uint32_t chartFace = chart->faces[i]; - fprintf(file, "f "); - for (uint32_t j = 0; j < 3; j++) { - const uint32_t index = chartFace * 3 + j + 1; // 1-indexed - fprintf(file, "%d/%d/%d%c", index, index, index, j == 2 ? '\n' : ' '); - } - } - fclose(file); + } + + // m_faceCharts for the chart faces must be set to the chart ID. Needed to compute boundary edges. + bool isChartParameterizationValid(const Chart *chart) + { + const uint32_t faceCount = chart->faces.size(); + // Check for flipped faces in the parameterization. OK if all are flipped. + uint32_t flippedFaceCount = 0; + for (uint32_t i = 0; i < faceCount; i++) { + if (isFaceFlipped(chart->faces[i])) + flippedFaceCount++; + } + if (flippedFaceCount != 0 && flippedFaceCount != faceCount) + return false; + // Check for boundary intersection in the parameterization. + m_boundaryGrid.reset(m_texcoords.data()); + for (uint32_t i = 0; i < faceCount; i++) { + const uint32_t f = chart->faces[i]; + for (uint32_t j = 0; j < 3; j++) { + const uint32_t edge = f * 3 + j; + if (isChartBoundaryEdge(chart, edge)) + m_boundaryGrid.append(edge); } } -#endif - return !intersect; + if (m_boundaryGrid.intersectSelf(m_mesh->epsilon())) + return false; + return true; } - bool canMergeCharts(Chart *chart1, Chart *chart2) + bool addFaceToChart(Chart *chart, uint32_t face) { - for (uint32_t i = 0; i < chart2->faces.size(); i++) { - if (isFaceFlipped(chart2->faces[i])) - return false; + XA_DEBUG_ASSERT(m_faceCharts[face] == -1); + const uint32_t oldFaceCount = chart->faces.size(); + const bool firstFace = oldFaceCount == 0; + // Append the face and any coplanar connected faces to the chart faces array. + chart->faces.push_back(face); + uint32_t coplanarFace = m_nextPlanarRegionFace[face]; + while (coplanarFace != face) { + XA_DEBUG_ASSERT(m_faceCharts[coplanarFace] == -1); + chart->faces.push_back(coplanarFace); + coplanarFace = m_nextPlanarRegionFace[coplanarFace]; } - computeChartBoundaryEdges(chart1, &m_tempEdges1); - computeChartBoundaryEdges(chart2, &m_tempEdges2); - return !edgeArraysIntersect(m_tempEdges1.data(), m_tempEdges1.size(), m_tempEdges2.data(), m_tempEdges2.size()); - } - - void addFaceToChart(Chart *chart, uint32_t f) - { - const bool firstFace = chart->faces.isEmpty(); - // Use the first face normal as the chart basis. + const uint32_t faceCount = chart->faces.size(); + // Compute basis. + Basis basis; if (firstFace) { - chart->basis.normal = m_faceNormals[f]; - chart->basis.tangent = m_faceTangents[f]; - chart->basis.bitangent = m_faceBitangents[f]; - createFaceTexcoords(chart, f); + // Use the first face normal. + // Use any edge as the tangent vector. + basis.normal = m_faceNormals[face]; + basis.tangent = normalize(m_mesh->position(m_mesh->vertexAt(face * 3 + 0)) - m_mesh->position(m_mesh->vertexAt(face * 3 + 1)), kEpsilon); + basis.bitangent = cross(basis.normal, basis.tangent); + } else { + // Use best fit normal. + if (!computeChartBasis(chart, &basis)) { + chart->faces.resize(oldFaceCount); + return false; + } + if (dot(basis.normal, m_faceNormals[face]) < 0.0f) // Flip normal if oriented in the wrong direction. + basis.normal = -basis.normal; } - // Add face to chart. - chart->faces.push_back(f); - XA_DEBUG_ASSERT(m_faceChartArray[f] == -1); - m_faceChartArray[f] = chart->id; - m_facesLeft--; - // Update area and boundary length. - chart->area = chart->area + m_faceAreas[f]; - chart->boundaryLength = computeBoundaryLength(chart, f); - chart->normalSum += m_mesh->triangleNormalAreaScaled(f); - chart->averageNormal = normalizeSafe(chart->normalSum, Vector3(0), 0.0f); - chart->centroidSum += m_mesh->triangleCenter(f); - chart->centroid = chart->centroidSum / float(chart->faces.size()); - // Update candidates. - updateChartCandidates(chart, f); - } - -#if XA_GROW_CHARTS_COPLANAR - void growChartCoplanar(Chart *chart) - { - XA_DEBUG_ASSERT(!chart->faces.isEmpty()); - for (uint32_t i = 0; i < chart->faces.size(); i++) { - const uint32_t chartFace = chart->faces[i]; - uint32_t face = m_nextPlanarRegionFace[chartFace]; - while (face != chartFace) { - // Not assigned to a chart? - if (m_faceChartArray[face] == -1) { - createFaceTexcoords(chart, face); - addFaceToChart(chart, face); - } - face = m_nextPlanarRegionFace[face]; + if (!firstFace) { + // Compute orthogonal parameterization and check that it is valid. + parameterizeChart(chart); + for (uint32_t i = oldFaceCount; i < faceCount; i++) + m_faceCharts[chart->faces[i]] = chart->id; + if (!isChartParameterizationValid(chart)) { + for (uint32_t i = oldFaceCount; i < faceCount; i++) + m_faceCharts[chart->faces[i]] = -1; + chart->faces.resize(oldFaceCount); + return false; } } + // Add face(s) to chart. + chart->basis = basis; + chart->area = computeArea(chart, face); + chart->boundaryLength = computeBoundaryLength(chart, face); + for (uint32_t i = oldFaceCount; i < faceCount; i++) { + const uint32_t f = chart->faces[i]; + m_faceCharts[f] = chart->id; + m_facesLeft--; + chart->centroidSum += m_mesh->computeFaceCenter(f); + } + chart->centroid = chart->centroidSum / float(chart->faces.size()); + // Refresh candidates. + chart->candidates.clear(); + for (uint32_t i = 0; i < faceCount; i++) { + // Traverse neighboring faces, add the ones that do not belong to any chart yet. + const uint32_t f = chart->faces[i]; + for (uint32_t j = 0; j < 3; j++) { + const uint32_t edge = f * 3 + j; + const uint32_t oedge = m_mesh->oppositeEdge(edge); + if (oedge == UINT32_MAX) + continue; // Boundary edge. + const uint32_t oface = meshEdgeFace(oedge); + if (m_faceCharts[oface] != -1) + continue; // Face belongs to another chart. + if (chart->failedPlanarRegions.contains(m_facePlanarRegionId[oface])) + continue; // Failed to add this faces planar region to the chart before. + const float cost = evaluateCost(chart, oface); + if (cost < FLT_MAX) + chart->candidates.push(cost, oface); + } + } + return true; } -#endif + // Returns true if the seed has changed. bool relocateSeed(Chart *chart) { // Find the first N triangles that fit the proxy best. const uint32_t faceCount = chart->faces.size(); m_bestTriangles.clear(); for (uint32_t i = 0; i < faceCount; i++) { - float priority = evaluateProxyFitMetric(chart, chart->faces[i]); - m_bestTriangles.push(priority, chart->faces[i]); + const float cost = evaluateProxyFitMetric(chart, chart->faces[i]); + m_bestTriangles.push(cost, chart->faces[i]); } // Of those, choose the least central triangle. uint32_t leastCentral = 0; float maxDistance = -1; - const uint32_t bestCount = m_bestTriangles.count(); - for (uint32_t i = 0; i < bestCount; i++) { - Vector3 faceCentroid = m_mesh->triangleCenter(m_bestTriangles.pairs[i].face); - float distance = length(chart->centroid - faceCentroid); + for (;;) { + if (m_bestTriangles.count() == 0) + break; + const uint32_t face = m_bestTriangles.pop(); + Vector3 faceCentroid = m_mesh->computeFaceCenter(face); + const float distance = length(chart->centroid - faceCentroid); if (distance > maxDistance) { maxDistance = distance; - leastCentral = m_bestTriangles.pairs[i].face; + leastCentral = face; } } XA_DEBUG_ASSERT(maxDistance >= 0); // In order to prevent k-means cyles we record all the previously chosen seeds. for (uint32_t i = 0; i < chart->seeds.size(); i++) { - if (chart->seeds[i] == leastCentral) { + // Treat seeds belong to the same planar region as equal. + if (chart->seeds[i] == leastCentral || m_facePlanarRegionId[chart->seeds[i]] == m_facePlanarRegionId[leastCentral]) { // Move new seed to the end of the seed array. uint32_t last = chart->seeds.size() - 1; swap(chart->seeds[i], chart->seeds[last]); @@ -4907,26 +5427,32 @@ private: // Evaluate combined metric. float evaluateCost(Chart *chart, uint32_t face) const { + if (dot(m_faceNormals[face], chart->basis.normal) <= 0.26f) // ~75 degrees + return FLT_MAX; // Estimate boundary length and area: - const float newChartArea = chart->area + m_faceAreas[face]; - const float newBoundaryLength = computeBoundaryLength(chart, face); + float newChartArea = 0.0f, newBoundaryLength = 0.0f; + if (m_options.maxChartArea > 0.0f || m_options.roundnessMetricWeight > 0.0f) + newChartArea = computeArea(chart, face); + if (m_options.maxBoundaryLength > 0.0f || m_options.roundnessMetricWeight > 0.0f) + newBoundaryLength = computeBoundaryLength(chart, face); // Enforce limits strictly: if (m_options.maxChartArea > 0.0f && newChartArea > m_options.maxChartArea) return FLT_MAX; if (m_options.maxBoundaryLength > 0.0f && newBoundaryLength > m_options.maxBoundaryLength) return FLT_MAX; - if (dot(m_faceNormals[face], chart->averageNormal) < 0.5f) - return FLT_MAX; - // Penalize faces that cross seams, reward faces that close seams or reach boundaries. - // Make sure normal seams are fully respected: - const float N = evaluateNormalSeamMetric(chart, face); - if (m_options.normalSeamMetricWeight >= 1000.0f && N > 0.0f) - return FLT_MAX; - float cost = m_options.normalSeamMetricWeight * N; + float cost = 0.0f; + if (m_options.normalSeamMetricWeight > 0.0f) { + // Penalize faces that cross seams, reward faces that close seams or reach boundaries. + // Make sure normal seams are fully respected: + const float N = evaluateNormalSeamMetric(chart, face); + if (m_options.normalSeamMetricWeight >= 1000.0f && N > 0.0f) + return FLT_MAX; + cost += m_options.normalSeamMetricWeight * N; + } if (m_options.proxyFitMetricWeight > 0.0f) cost += m_options.proxyFitMetricWeight * evaluateProxyFitMetric(chart, face); if (m_options.roundnessMetricWeight > 0.0f) - cost += m_options.roundnessMetricWeight * evaluateRoundnessMetric(chart, face, newBoundaryLength, newChartArea); + cost += m_options.roundnessMetricWeight * evaluateRoundnessMetric(chart, newBoundaryLength, newChartArea); if (m_options.straightnessMetricWeight > 0.0f) cost += m_options.straightnessMetricWeight * evaluateStraightnessMetric(chart, face); if (m_options.textureSeamMetricWeight > 0.0f) @@ -4941,40 +5467,45 @@ private: } // Returns a value in [0-1]. - float evaluateProxyFitMetric(Chart *chart, uint32_t f) const + float evaluateProxyFitMetric(Chart *chart, uint32_t face) const { - const Vector3 faceNormal = m_faceNormals[f]; + // All faces in coplanar regions have the same normal, can use any face. + const Vector3 faceNormal = m_faceNormals[face]; // Use plane fitting metric for now: - return 1 - dot(faceNormal, chart->averageNormal); // @@ normal deviations should be weighted by face area + return 1 - dot(faceNormal, chart->basis.normal); // @@ normal deviations should be weighted by face area } - float evaluateRoundnessMetric(Chart *chart, uint32_t /*face*/, float newBoundaryLength, float newChartArea) const + float evaluateRoundnessMetric(Chart *chart, float newBoundaryLength, float newChartArea) const { - float roundness = square(chart->boundaryLength) / chart->area; - float newRoundness = square(newBoundaryLength) / newChartArea; - if (newRoundness > roundness) { - return square(newBoundaryLength) / (newChartArea * 4.0f * kPi); - } else { - // Offer no impedance to faces that improve roundness. - return 0; - } + const float roundness = square(chart->boundaryLength) / chart->area; + const float newBoundaryLengthSq = square(newBoundaryLength); + const float newRoundness = newBoundaryLengthSq / newChartArea; + if (newRoundness > roundness) + return newBoundaryLengthSq / (newChartArea * kPi4); + // Offer no impedance to faces that improve roundness. + return 0; } - float evaluateStraightnessMetric(Chart *chart, uint32_t f) const + float evaluateStraightnessMetric(Chart *chart, uint32_t firstFace) const { - float l_out = 0.0f; - float l_in = 0.0f; - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - float l = m_edgeLengths[it.edge()]; - if (it.isBoundary() || m_ignoreFaces[it.oppositeFace()]) { - l_out += l; - } else { - if (m_faceChartArray[it.oppositeFace()] != chart->id) { + float l_out = 0.0f, l_in = 0.0f; + const uint32_t planarRegionId = m_facePlanarRegionId[firstFace]; + uint32_t face = firstFace; + for (;;) { + for (Mesh::FaceEdgeIterator it(m_mesh, face); !it.isDone(); it.advance()) { + const float l = m_edgeLengths[it.edge()]; + if (it.isBoundary()) { l_out += l; - } else { - l_in += l; + } else if (m_facePlanarRegionId[it.oppositeFace()] != planarRegionId) { + if (m_faceCharts[it.oppositeFace()] != chart->id) + l_out += l; + else + l_in += l; } } + face = m_nextPlanarRegionFace[face]; + if (face == firstFace) + break; } XA_DEBUG_ASSERT(l_in != 0.0f); // Candidate face must be adjacent to chart. @@ This is not true if the input mesh has zero-length edges. float ratio = (l_out - l_in) / (l_out + l_in); @@ -4991,128 +5522,184 @@ private: const uint32_t v1 = m_mesh->vertexAt(meshEdgeIndex1(edge)); const uint32_t ov0 = m_mesh->vertexAt(meshEdgeIndex0(oppositeEdge)); const uint32_t ov1 = m_mesh->vertexAt(meshEdgeIndex1(oppositeEdge)); - return m_mesh->normal(v0) != m_mesh->normal(ov1) || m_mesh->normal(v1) != m_mesh->normal(ov0); + if (v0 == ov1 && v1 == ov0) + return false; + return !equal(m_mesh->normal(v0), m_mesh->normal(ov1), kNormalEpsilon) || !equal(m_mesh->normal(v1), m_mesh->normal(ov0), kNormalEpsilon); } - return m_faceNormals[meshEdgeFace(edge)] != m_faceNormals[meshEdgeFace(oppositeEdge)]; + const uint32_t f0 = meshEdgeFace(edge); + const uint32_t f1 = meshEdgeFace(oppositeEdge); + if (m_facePlanarRegionId[f0] == m_facePlanarRegionId[f1]) + return false; + return !equal(m_faceNormals[f0], m_faceNormals[f1], kNormalEpsilon); } - float evaluateNormalSeamMetric(Chart *chart, uint32_t f) const + float evaluateNormalSeamMetric(Chart *chart, uint32_t firstFace) const { - float seamFactor = 0.0f; - float totalLength = 0.0f; - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - if (it.isBoundary() || m_ignoreFaces[it.oppositeFace()]) - continue; - if (m_faceChartArray[it.oppositeFace()] != chart->id) - continue; - float l = m_edgeLengths[it.edge()]; - totalLength += l; - if (!it.isSeam()) - continue; - // Make sure it's a normal seam. - if (isNormalSeam(it.edge())) { - float d; - if (m_mesh->flags() & MeshFlags::HasNormals) { - const Vector3 &n0 = m_mesh->normal(it.vertex0()); - const Vector3 &n1 = m_mesh->normal(it.vertex1()); - const Vector3 &on0 = m_mesh->normal(m_mesh->vertexAt(meshEdgeIndex0(it.oppositeEdge()))); - const Vector3 &on1 = m_mesh->normal(m_mesh->vertexAt(meshEdgeIndex1(it.oppositeEdge()))); - const float d0 = clamp(dot(n0, on1), 0.0f, 1.0f); - const float d1 = clamp(dot(n1, on0), 0.0f, 1.0f); - d = (d0 + d1) * 0.5f; - } else { - d = clamp(dot(m_faceNormals[f], m_faceNormals[meshEdgeFace(it.oppositeEdge())]), 0.0f, 1.0f); + float seamFactor = 0.0f, totalLength = 0.0f; + uint32_t face = firstFace; + for (;;) { + for (Mesh::FaceEdgeIterator it(m_mesh, face); !it.isDone(); it.advance()) { + if (it.isBoundary()) + continue; + if (m_faceCharts[it.oppositeFace()] != chart->id) + continue; + float l = m_edgeLengths[it.edge()]; + totalLength += l; + if (!it.isSeam()) + continue; + // Make sure it's a normal seam. + if (isNormalSeam(it.edge())) { + float d; + if (m_mesh->flags() & MeshFlags::HasNormals) { + const Vector3 &n0 = m_mesh->normal(it.vertex0()); + const Vector3 &n1 = m_mesh->normal(it.vertex1()); + const Vector3 &on0 = m_mesh->normal(m_mesh->vertexAt(meshEdgeIndex0(it.oppositeEdge()))); + const Vector3 &on1 = m_mesh->normal(m_mesh->vertexAt(meshEdgeIndex1(it.oppositeEdge()))); + const float d0 = clamp(dot(n0, on1), 0.0f, 1.0f); + const float d1 = clamp(dot(n1, on0), 0.0f, 1.0f); + d = (d0 + d1) * 0.5f; + } else { + d = clamp(dot(m_faceNormals[face], m_faceNormals[meshEdgeFace(it.oppositeEdge())]), 0.0f, 1.0f); + } + l *= 1 - d; + seamFactor += l; } - l *= 1 - d; - seamFactor += l; } + face = m_nextPlanarRegionFace[face]; + if (face == firstFace) + break; } if (seamFactor <= 0.0f) return 0.0f; return seamFactor / totalLength; } - float evaluateTextureSeamMetric(Chart *chart, uint32_t f) const + float evaluateTextureSeamMetric(Chart *chart, uint32_t firstFace) const { - float seamLength = 0.0f; - float totalLength = 0.0f; - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - if (it.isBoundary() || m_ignoreFaces[it.oppositeFace()]) - continue; - if (m_faceChartArray[it.oppositeFace()] != chart->id) - continue; - float l = m_edgeLengths[it.edge()]; - totalLength += l; - if (!it.isSeam()) - continue; - // Make sure it's a texture seam. - if (it.isTextureSeam()) - seamLength += l; + float seamLength = 0.0f, totalLength = 0.0f; + uint32_t face = firstFace; + for (;;) { + for (Mesh::FaceEdgeIterator it(m_mesh, face); !it.isDone(); it.advance()) { + if (it.isBoundary()) + continue; + if (m_faceCharts[it.oppositeFace()] != chart->id) + continue; + float l = m_edgeLengths[it.edge()]; + totalLength += l; + if (!it.isSeam()) + continue; + // Make sure it's a texture seam. + if (it.isTextureSeam()) + seamLength += l; + } + face = m_nextPlanarRegionFace[face]; + if (face == firstFace) + break; } - if (seamLength == 0.0f) + if (seamLength <= 0.0f) return 0.0f; // Avoid division by zero. return seamLength / totalLength; } - float computeBoundaryLength(Chart *chart, uint32_t f) const + float computeArea(Chart *chart, uint32_t firstFace) const + { + float area = chart->area; + uint32_t face = firstFace; + for (;;) { + area += m_faceAreas[face]; + face = m_nextPlanarRegionFace[face]; + if (face == firstFace) + break; + } + return area; + } + + float computeBoundaryLength(Chart *chart, uint32_t firstFace) const { float boundaryLength = chart->boundaryLength; // Add new edges, subtract edges shared with the chart. - for (Mesh::FaceEdgeIterator it(m_mesh, f); !it.isDone(); it.advance()) { - const float edgeLength = m_edgeLengths[it.edge()]; - if (it.isBoundary() || m_ignoreFaces[it.oppositeFace()]) { - boundaryLength += edgeLength; - } else { - if (m_faceChartArray[it.oppositeFace()] != chart->id) + const uint32_t planarRegionId = m_facePlanarRegionId[firstFace]; + uint32_t face = firstFace; + for (;;) { + for (Mesh::FaceEdgeIterator it(m_mesh, face); !it.isDone(); it.advance()) { + const float edgeLength = m_edgeLengths[it.edge()]; + if (it.isBoundary()) { boundaryLength += edgeLength; - else - boundaryLength -= edgeLength; + } else if (m_facePlanarRegionId[it.oppositeFace()] != planarRegionId) { + if (m_faceCharts[it.oppositeFace()] != chart->id) + boundaryLength += edgeLength; + else + boundaryLength -= edgeLength; + } } + face = m_nextPlanarRegionFace[face]; + if (face == firstFace) + break; } return max(0.0f, boundaryLength); // @@ Hack! } - void mergeChart(Chart *owner, Chart *chart, float sharedBoundaryLength) + bool mergeChart(Chart *owner, Chart *chart, float sharedBoundaryLength) { - const uint32_t faceCount = chart->faces.size(); - for (uint32_t i = 0; i < faceCount; i++) { - uint32_t f = chart->faces[i]; - XA_DEBUG_ASSERT(m_faceChartArray[f] == chart->id); - m_faceChartArray[f] = owner->id; - owner->faces.push_back(f); + const uint32_t oldOwnerFaceCount = owner->faces.size(); + const uint32_t chartFaceCount = chart->faces.size(); + owner->faces.push_back(chart->faces); + for (uint32_t i = 0; i < chartFaceCount; i++) { + XA_DEBUG_ASSERT(m_faceCharts[chart->faces[i]] == chart->id); + m_faceCharts[chart->faces[i]] = owner->id; } + // Compute basis using best fit normal. + Basis basis; + if (!computeChartBasis(owner, &basis)) { + owner->faces.resize(oldOwnerFaceCount); + for (uint32_t i = 0; i < chartFaceCount; i++) + m_faceCharts[chart->faces[i]] = chart->id; + return false; + } + if (dot(basis.normal, m_faceNormals[owner->faces[0]]) < 0.0f) // Flip normal if oriented in the wrong direction. + basis.normal = -basis.normal; + // Compute orthogonal parameterization and check that it is valid. + parameterizeChart(owner); + if (!isChartParameterizationValid(owner)) { + owner->faces.resize(oldOwnerFaceCount); + for (uint32_t i = 0; i < chartFaceCount; i++) + m_faceCharts[chart->faces[i]] = chart->id; + return false; + } + // Merge chart. + owner->basis = basis; + owner->failedPlanarRegions.push_back(chart->failedPlanarRegions); // Update adjacencies? owner->area += chart->area; owner->boundaryLength += chart->boundaryLength - sharedBoundaryLength; - owner->normalSum += chart->normalSum; - owner->averageNormal = normalizeSafe(owner->normalSum, Vector3(0), 0.0f); // Delete chart. - m_chartArray[chart->id] = nullptr; + m_charts[chart->id] = nullptr; chart->~Chart(); XA_FREE(chart); + return true; } const Mesh *m_mesh; - const Array *m_meshFaces; - Array m_ignoreFaces; Array m_edgeLengths; Array m_faceAreas; Array m_faceNormals; - Array m_faceTangents; - Array m_faceBitangents; Array m_texcoords; uint32_t m_facesLeft; - Array m_faceChartArray; - Array m_chartArray; - PriorityQueue m_bestTriangles; + Array m_faceCharts; + Array m_charts; + CostQueue m_bestTriangles; KISSRng m_rand; ChartOptions m_options; - Array m_faceCandidateCharts; - Array m_faceCandidateCosts; -#if XA_GROW_CHARTS_COPLANAR Array m_nextPlanarRegionFace; + Array m_facePlanarRegionId; + Array m_tempPoints; + UniformGrid2 m_boundaryGrid; +#if XA_MERGE_CHARTS + // mergeCharts + Array m_sharedBoundaryLengths; + Array m_sharedBoundaryLengthsNoSeams; + Array m_sharedBoundaryEdgeCountNoSeams; #endif - Array m_tempEdges1, m_tempEdges2; }; } // namespace segment @@ -5301,7 +5888,11 @@ private: // q = A·p sparse::mult(A, p, q); // alpha = delta_new / p·q - alpha = delta_new / sparse::dot(p, q); + const float pdotq = sparse::dot(p, q); + if (!isFinite(pdotq) || isNan(pdotq)) + alpha = 0.0f; + else + alpha = delta_new / pdotq; // x = alfa·p + x sparse::saxpy(alpha, p, x); if ((i & 31) == 0) { // recompute r after 32 steps @@ -5514,186 +6105,518 @@ static bool computeLeastSquaresConformalMap(Mesh *mesh) // Solve Solver::LeastSquaresSolver(A, b, x, lockedParameters, 4, 0.000001f); // Map x back to texcoords: - for (uint32_t v = 0; v < vertexCount; v++) + for (uint32_t v = 0; v < vertexCount; v++) { mesh->texcoord(v) = Vector2(x[2 * v + 0], x[2 * v + 1]); + XA_DEBUG_ASSERT(!isNan(mesh->texcoord(v).x)); + XA_DEBUG_ASSERT(!isNan(mesh->texcoord(v).y)); + } return true; } -static bool computeOrthogonalProjectionMap(Mesh *mesh) +#if XA_RECOMPUTE_CHARTS +struct PiecewiseParam { - uint32_t vertexCount = mesh->vertexCount(); - // Avoid redundant computations. - float matrix[6]; - Fit::computeCovariance(vertexCount, &mesh->position(0), matrix); - if (matrix[0] == 0 && matrix[3] == 0 && matrix[5] == 0) - return false; - float eigenValues[3]; - Vector3 eigenVectors[3]; - if (!Fit::eigenSolveSymmetric3(matrix, eigenValues, eigenVectors)) - return false; - Vector3 axis[2]; - axis[0] = normalize(eigenVectors[0], kEpsilon); - axis[1] = normalize(eigenVectors[1], kEpsilon); - // Project vertices to plane. - for (uint32_t i = 0; i < vertexCount; i++) - mesh->texcoord(i) = Vector2(dot(axis[0], mesh->position(i)), dot(axis[1], mesh->position(i))); - return true; -} + void reset(const Mesh *mesh, uint32_t faceCount) + { + m_mesh = mesh; + m_faceCount = faceCount; + const uint32_t vertexCount = m_mesh->vertexCount(); + m_texcoords.resize(vertexCount); + m_patch.reserve(m_faceCount); + m_faceAssigned.resize(m_faceCount); + m_faceAssigned.zeroOutMemory(); + m_faceInvalid.resize(m_faceCount); + m_faceInPatch.resize(m_faceCount); + m_vertexInPatch.resize(vertexCount); + m_faceInCandidates.resize(m_faceCount); + } + + ConstArrayView chartFaces() const { return m_patch; } + const Vector2 *texcoords() const { return m_texcoords.data(); } + + bool computeChart() + { + m_patch.clear(); + m_faceInvalid.zeroOutMemory(); + m_faceInPatch.zeroOutMemory(); + m_vertexInPatch.zeroOutMemory(); + // Add the seed face (first unassigned face) to the patch. + uint32_t seed = UINT32_MAX; + for (uint32_t f = 0; f < m_faceCount; f++) { + if (m_faceAssigned.get(f)) + continue; + seed = f; + m_patch.push_back(seed); + m_faceInPatch.set(seed); + m_faceAssigned.set(seed); + Vector2 texcoords[3]; + orthoProjectFace(seed, texcoords); + for (uint32_t i = 0; i < 3; i++) { + const uint32_t vertex = m_mesh->vertexAt(seed * 3 + i); + m_vertexInPatch.set(vertex); + m_texcoords[vertex] = texcoords[i]; + } + break; + } + if (seed == UINT32_MAX) + return false; + for (;;) { + findCandidates(); + if (m_candidates.isEmpty()) + break; + for (;;) { + // Find the candidate with the lowest cost. + float lowestCost = FLT_MAX; + uint32_t bestCandidate = UINT32_MAX; + for (uint32_t i = 0; i < m_candidates.size(); i++) { + const Candidate &candidate = m_candidates[i]; + if (m_faceInvalid.get(candidate.face)) // A candidate face may be invalidated after is was added. + continue; + if (candidate.maxCost < lowestCost) { + lowestCost = candidate.maxCost; + bestCandidate = i; + } + } + if (bestCandidate == UINT32_MAX) + break; + // Compute the position by averaging linked candidates (candidates that share the same free vertex). + Vector2 position(0.0f); + uint32_t n = 0; + for (CandidateIterator it(m_candidates, bestCandidate); !it.isDone(); it.advance()) { + position += it.current().position; + n++; + } + position *= 1.0f / (float)n; + const uint32_t freeVertex = m_candidates[bestCandidate].vertex; + XA_DEBUG_ASSERT(!isNan(position.x)); + XA_DEBUG_ASSERT(!isNan(position.y)); + m_texcoords[freeVertex] = position; + // Check for flipped faces. This is also done when candidates are first added, but the averaged position of the free vertex is different now, so check again. + bool invalid = false; + for (CandidateIterator it(m_candidates, bestCandidate); !it.isDone(); it.advance()) { + const uint32_t vertex0 = m_mesh->vertexAt(meshEdgeIndex0(it.current().patchEdge)); + const uint32_t vertex1 = m_mesh->vertexAt(meshEdgeIndex1(it.current().patchEdge)); + const float freeVertexOrient = orientToEdge(m_texcoords[vertex0], m_texcoords[vertex1], position); + if ((it.current().patchVertexOrient < 0.0f && freeVertexOrient < 0.0f) || (it.current().patchVertexOrient > 0.0f && freeVertexOrient > 0.0f)) { + invalid = true; + break; + } + } + // Check for boundary intersection. + if (!invalid) { + m_boundaryGrid.reset(m_texcoords.data(), m_mesh->indices()); + // Add edges on the patch boundary to the grid. + // Temporarily adding candidate faces to the patch makes it simpler to detect which edges are on the boundary. + const uint32_t oldPatchSize = m_patch.size(); + for (CandidateIterator it(m_candidates, bestCandidate); !it.isDone(); it.advance()) + m_patch.push_back(it.current().face); + for (uint32_t i = 0; i < m_patch.size(); i++) { + for (Mesh::FaceEdgeIterator it(m_mesh, m_patch[i]); !it.isDone(); it.advance()) { + const uint32_t oface = it.oppositeFace(); + if (oface == UINT32_MAX || oface >= m_faceCount || !m_faceInPatch.get(oface)) + m_boundaryGrid.append(it.edge()); + } + } + invalid = m_boundaryGrid.intersectSelf(m_mesh->epsilon()); + m_patch.resize(oldPatchSize); + } + if (invalid) { + // Mark all faces of linked candidates as invalid. + for (CandidateIterator it(m_candidates, bestCandidate); !it.isDone(); it.advance()) + m_faceInvalid.set(it.current().face); + continue; + } + // Add faces to the patch. + for (CandidateIterator it(m_candidates, bestCandidate); !it.isDone(); it.advance()) { + m_patch.push_back(it.current().face); + m_faceInPatch.set(it.current().face); + m_faceAssigned.set(it.current().face); + } + // Add vertex to the patch. + m_vertexInPatch.set(freeVertex); + // Successfully added candidate face(s) to patch. + break; + } + } + return true; + } + +private: + struct Candidate + { + uint32_t face, vertex; + uint32_t next; // The next candidate with the same vertex. + Vector2 position; + float cost; + float maxCost; // Of all linked candidates. + uint32_t patchEdge; + float patchVertexOrient; + }; + + struct CandidateIterator + { + CandidateIterator(Array &candidates, uint32_t first) : m_candidates(candidates), m_current(first) {} + void advance() { if (m_current != UINT32_MAX) m_current = m_candidates[m_current].next; } + bool isDone() const { return m_current == UINT32_MAX; } + Candidate ¤t() { return m_candidates[m_current]; } + + private: + Array &m_candidates; + uint32_t m_current; + }; + + const Mesh *m_mesh; + uint32_t m_faceCount; + Array m_texcoords; + Array m_candidates; + BitArray m_faceInCandidates; + Array m_patch; + BitArray m_faceAssigned; // Face is assigned to a previous chart or the current patch. + BitArray m_faceInPatch, m_vertexInPatch; + BitArray m_faceInvalid; // Face cannot be added to the patch - flipped, cost too high or causes boundary intersection. + UniformGrid2 m_boundaryGrid; + + // Find candidate faces on the patch front. + void findCandidates() + { + m_candidates.clear(); + m_faceInCandidates.zeroOutMemory(); + for (uint32_t i = 0; i < m_patch.size(); i++) { + for (Mesh::FaceEdgeIterator it(m_mesh, m_patch[i]); !it.isDone(); it.advance()) { + const uint32_t oface = it.oppositeFace(); + if (oface == UINT32_MAX || oface >= m_faceCount || m_faceAssigned.get(oface) || m_faceInCandidates.get(oface)) + continue; + // Found an active edge on the patch front. + // Find the free vertex (the vertex that isn't on the active edge). + // Compute the orientation of the other patch face vertex to the active edge. + uint32_t freeVertex = UINT32_MAX; + float orient = 0.0f; + for (uint32_t j = 0; j < 3; j++) { + const uint32_t vertex = m_mesh->vertexAt(oface * 3 + j); + if (vertex != it.vertex0() && vertex != it.vertex1()) { + freeVertex = vertex; + orient = orientToEdge(m_texcoords[it.vertex0()], m_texcoords[it.vertex1()], m_texcoords[m_mesh->vertexAt(m_patch[i] * 3 + j)]); + break; + } + } + XA_DEBUG_ASSERT(freeVertex != UINT32_MAX); + // If the free vertex is already in the patch, the face is enclosed by the patch. Add the face to the patch - don't need to assign texcoords. + if (m_vertexInPatch.get(freeVertex)) { + freeVertex = UINT32_MAX; + m_patch.push_back(oface); + m_faceAssigned.set(oface); + continue; + } + // Check this here rather than above so faces enclosed by the patch are always added. + if (m_faceInvalid.get(oface)) + continue; + addCandidateFace(it.edge(), orient, oface, it.oppositeEdge(), freeVertex); + } + } + // Link candidates that share the same vertex. + for (uint32_t i = 0; i < m_candidates.size(); i++) { + if (m_candidates[i].next != UINT32_MAX) + continue; + uint32_t current = i; + for (uint32_t j = i + 1; j < m_candidates.size(); j++) { + if (m_candidates[j].vertex == m_candidates[current].vertex) { + m_candidates[current].next = j; + current = j; + } + } + } + // Set max cost for linked candidates. + for (uint32_t i = 0; i < m_candidates.size(); i++) { + float maxCost = 0.0f; + for (CandidateIterator it(m_candidates, i); !it.isDone(); it.advance()) + maxCost = max(maxCost, it.current().cost); + for (CandidateIterator it(m_candidates, i); !it.isDone(); it.advance()) + it.current().maxCost = maxCost; + } + } + + void addCandidateFace(uint32_t patchEdge, float patchVertexOrient, uint32_t face, uint32_t edge, uint32_t freeVertex) + { + Vector2 texcoords[3]; + orthoProjectFace(face, texcoords); + // Find corresponding vertices between the patch edge and candidate edge. + const uint32_t vertex0 = m_mesh->vertexAt(meshEdgeIndex0(patchEdge)); + const uint32_t vertex1 = m_mesh->vertexAt(meshEdgeIndex1(patchEdge)); + uint32_t localVertex0 = UINT32_MAX, localVertex1 = UINT32_MAX, localFreeVertex = UINT32_MAX; + for (uint32_t i = 0; i < 3; i++) { + const uint32_t vertex = m_mesh->vertexAt(face * 3 + i); + if (vertex == m_mesh->vertexAt(meshEdgeIndex1(edge))) + localVertex0 = i; + else if (vertex == m_mesh->vertexAt(meshEdgeIndex0(edge))) + localVertex1 = i; + else + localFreeVertex = i; + } + // Scale orthogonal projection to match the patch edge. + const Vector2 patchEdgeVec = m_texcoords[vertex1] - m_texcoords[vertex0]; + const Vector2 localEdgeVec = texcoords[localVertex1] - texcoords[localVertex0]; + const float len1 = length(patchEdgeVec); + const float len2 = length(localEdgeVec); + const float scale = len1 / len2; + XA_ASSERT(scale > 0.0f); + for (uint32_t i = 0; i < 3; i++) + texcoords[i] *= scale; + // Translate to the first vertex on the patch edge. + const Vector2 translate = m_texcoords[vertex0] - texcoords[localVertex0]; + for (uint32_t i = 0; i < 3; i++) + texcoords[i] += translate; + // Compute the angle between the patch edge and the corresponding local edge. + const float angle = atan2f(patchEdgeVec.y, patchEdgeVec.x) - atan2f(localEdgeVec.y, localEdgeVec.x); + // Rotate so the patch edge and the corresponding local edge occupy the same space. + for (uint32_t i = 0; i < 3; i++) { + if (i == localVertex0) + continue; + Vector2 &uv = texcoords[i]; + uv -= texcoords[localVertex0]; // Rotate around the first vertex. + const float c = cosf(angle); + const float s = sinf(angle); + const float x = uv.x * c - uv.y * s; + const float y = uv.y * c + uv.x * s; + uv.x = x + texcoords[localVertex0].x; + uv.y = y + texcoords[localVertex0].y; + } + // Check for local overlap (flipped triangle). + // The patch face vertex that isn't on the active edge and the free vertex should be oriented on opposite sides to the active edge. + const float freeVertexOrient = orientToEdge(m_texcoords[vertex0], m_texcoords[vertex1], texcoords[localFreeVertex]); + if ((patchVertexOrient < 0.0f && freeVertexOrient < 0.0f) || (patchVertexOrient > 0.0f && freeVertexOrient > 0.0f)) { + m_faceInvalid.set(face); + return; + } + const float stretch = computeStretch(m_mesh->position(vertex0), m_mesh->position(vertex1), m_mesh->position(freeVertex), texcoords[0], texcoords[1], texcoords[2]); + if (stretch >= FLT_MAX) { + m_faceInvalid.set(face); + return; + } + const float cost = fabsf(stretch - 1.0f); +#if 0 + if (cost > 0.25f) { + m_faceInvalid.set(face); + return; + } +#endif + // Add the candidate. + Candidate candidate; + candidate.face = face; + candidate.vertex = freeVertex; + candidate.position = texcoords[localFreeVertex]; + candidate.next = UINT32_MAX; + candidate.cost = cost; + candidate.patchEdge = patchEdge; + candidate.patchVertexOrient = patchVertexOrient; + m_candidates.push_back(candidate); + m_faceInCandidates.set(face); + } + + void orthoProjectFace(uint32_t face, Vector2 *texcoords) const + { + const Vector3 normal = m_mesh->computeFaceNormal(face); + const Vector3 tangent = normalize(m_mesh->position(m_mesh->vertexAt(face * 3 + 1)) - m_mesh->position(m_mesh->vertexAt(face * 3 + 0)), kEpsilon); + const Vector3 bitangent = cross(normal, tangent); + for (uint32_t i = 0; i < 3; i++) { + const Vector3 &pos = m_mesh->position(m_mesh->vertexAt(face * 3 + i)); + texcoords[i] = Vector2(dot(tangent, pos), dot(bitangent, pos)); + } + } + + float parametricArea(const Vector2 *texcoords) const + { + const Vector2 &v1 = texcoords[0]; + const Vector2 &v2 = texcoords[1]; + const Vector2 &v3 = texcoords[2]; + return ((v2.x - v1.x) * (v3.y - v1.y) - (v3.x - v1.x) * (v2.y - v1.y)) * 0.5f; + } + + float computeStretch(Vector3 p1, Vector3 p2, Vector3 p3, Vector2 t1, Vector2 t2, Vector2 t3) const + { + float parametricArea = ((t2.y - t1.y) * (t3.x - t1.x) - (t3.y - t1.y) * (t2.x - t1.x)) * 0.5f; + if (isZero(parametricArea, kAreaEpsilon)) + return FLT_MAX; + if (parametricArea < 0.0f) + parametricArea = fabsf(parametricArea); + const float geometricArea = length(cross(p2 - p1, p3 - p1)) * 0.5f; + if (parametricArea <= geometricArea) + return parametricArea / geometricArea; + else + return geometricArea / parametricArea; + } + + // Return value is positive if the point is one side of the edge, negative if on the other side. + float orientToEdge(Vector2 edgeVertex0, Vector2 edgeVertex1, Vector2 point) const + { + return (edgeVertex0.x - point.x) * (edgeVertex1.y - point.y) - (edgeVertex0.y - point.y) * (edgeVertex1.x - point.x); + } +}; +#endif // Estimate quality of existing parameterization. -struct ParameterizationQuality +struct Quality { + // computeBoundaryIntersection + bool boundaryIntersection = false; + + // computeFlippedFaces uint32_t totalTriangleCount = 0; uint32_t flippedTriangleCount = 0; uint32_t zeroAreaTriangleCount = 0; - float parametricArea = 0.0f; - float geometricArea = 0.0f; + + // computeMetrics + float totalParametricArea = 0.0f; + float totalGeometricArea = 0.0f; float stretchMetric = 0.0f; float maxStretchMetric = 0.0f; float conformalMetric = 0.0f; float authalicMetric = 0.0f; - bool boundaryIntersection = false; -}; -static ParameterizationQuality calculateParameterizationQuality(const Mesh *mesh, uint32_t faceCount, Array *flippedFaces) -{ - XA_DEBUG_ASSERT(mesh != nullptr); - ParameterizationQuality quality; - uint32_t firstBoundaryEdge = UINT32_MAX; - for (uint32_t e = 0; e < mesh->edgeCount(); e++) { - if (mesh->isBoundaryEdge(e)) { - firstBoundaryEdge = e; - break; - } + void computeBoundaryIntersection(const Mesh *mesh, UniformGrid2 &boundaryGrid) + { + const Array &boundaryEdges = mesh->boundaryEdges(); + const uint32_t boundaryEdgeCount = boundaryEdges.size(); + boundaryGrid.reset(mesh->texcoords(), mesh->indices(), boundaryEdgeCount); + for (uint32_t i = 0; i < boundaryEdgeCount; i++) + boundaryGrid.append(boundaryEdges[i]); + boundaryIntersection = boundaryGrid.intersectSelf(mesh->epsilon()); +#if XA_DEBUG_EXPORT_BOUNDARY_GRID + static int exportIndex = 0; + char filename[256]; + XA_SPRINTF(filename, sizeof(filename), "debug_boundary_grid_%03d.tga", exportIndex); + boundaryGrid.debugExport(filename); + exportIndex++; +#endif } - XA_DEBUG_ASSERT(firstBoundaryEdge != UINT32_MAX); - for (Mesh::BoundaryEdgeIterator it1(mesh, firstBoundaryEdge); !it1.isDone(); it1.advance()) { - const uint32_t edge1 = it1.edge(); - for (Mesh::BoundaryEdgeIterator it2(mesh, firstBoundaryEdge); !it2.isDone(); it2.advance()) { - const uint32_t edge2 = it2.edge(); - // Skip self and edges directly connected to edge1. - if (edge1 == edge2 || it1.nextEdge() == edge2 || it2.nextEdge() == edge1) - continue; - const Vector2 &a1 = mesh->texcoord(mesh->vertexAt(meshEdgeIndex0(edge1))); - const Vector2 &a2 = mesh->texcoord(mesh->vertexAt(meshEdgeIndex1(edge1))); - const Vector2 &b1 = mesh->texcoord(mesh->vertexAt(meshEdgeIndex0(edge2))); - const Vector2 &b2 = mesh->texcoord(mesh->vertexAt(meshEdgeIndex1(edge2))); - if (linesIntersect(a1, a2, b1, b2, mesh->epsilon())) { - quality.boundaryIntersection = true; - break; - } - } - if (quality.boundaryIntersection) - break; - } - if (flippedFaces) - flippedFaces->clear(); - for (uint32_t f = 0; f < faceCount; f++) { - Vector3 pos[3]; - Vector2 texcoord[3]; - for (int i = 0; i < 3; i++) { - const uint32_t v = mesh->vertexAt(f * 3 + i); - pos[i] = mesh->position(v); - texcoord[i] = mesh->texcoord(v); - } - quality.totalTriangleCount++; - // Evaluate texture stretch metric. See: - // - "Texture Mapping Progressive Meshes", Sander, Snyder, Gortler & Hoppe - // - "Mesh Parameterization: Theory and Practice", Siggraph'07 Course Notes, Hormann, Levy & Sheffer. - const float t1 = texcoord[0].x; - const float s1 = texcoord[0].y; - const float t2 = texcoord[1].x; - const float s2 = texcoord[1].y; - const float t3 = texcoord[2].x; - const float s3 = texcoord[2].y; - float parametricArea = ((s2 - s1) * (t3 - t1) - (s3 - s1) * (t2 - t1)) / 2; - if (isZero(parametricArea, kAreaEpsilon)) { - quality.zeroAreaTriangleCount++; - continue; - } - if (parametricArea < 0.0f) { - // Count flipped triangles. - quality.flippedTriangleCount++; - if (flippedFaces) - flippedFaces->push_back(f); - parametricArea = fabsf(parametricArea); - } - const float geometricArea = length(cross(pos[1] - pos[0], pos[2] - pos[0])) / 2; - const Vector3 Ss = (pos[0] * (t2 - t3) + pos[1] * (t3 - t1) + pos[2] * (t1 - t2)) / (2 * parametricArea); - const Vector3 St = (pos[0] * (s3 - s2) + pos[1] * (s1 - s3) + pos[2] * (s2 - s1)) / (2 * parametricArea); - const float a = dot(Ss, Ss); // E - const float b = dot(Ss, St); // F - const float c = dot(St, St); // G - // Compute eigen-values of the first fundamental form: - const float sigma1 = sqrtf(0.5f * max(0.0f, a + c - sqrtf(square(a - c) + 4 * square(b)))); // gamma uppercase, min eigenvalue. - const float sigma2 = sqrtf(0.5f * max(0.0f, a + c + sqrtf(square(a - c) + 4 * square(b)))); // gamma lowercase, max eigenvalue. - XA_ASSERT(sigma2 > sigma1 || equal(sigma1, sigma2, kEpsilon)); - // isometric: sigma1 = sigma2 = 1 - // conformal: sigma1 / sigma2 = 1 - // authalic: sigma1 * sigma2 = 1 - const float rmsStretch = sqrtf((a + c) * 0.5f); - const float rmsStretch2 = sqrtf((square(sigma1) + square(sigma2)) * 0.5f); - XA_DEBUG_ASSERT(equal(rmsStretch, rmsStretch2, 0.01f)); - XA_UNUSED(rmsStretch2); - quality.stretchMetric += square(rmsStretch) * geometricArea; - quality.maxStretchMetric = max(quality.maxStretchMetric, sigma2); - if (!isZero(sigma1, 0.000001f)) { - // sigma1 is zero when geometricArea is zero. - quality.conformalMetric += (sigma2 / sigma1) * geometricArea; - } - quality.authalicMetric += (sigma1 * sigma2) * geometricArea; - // Accumulate total areas. - quality.geometricArea += geometricArea; - quality.parametricArea += parametricArea; - //triangleConformalEnergy(q, p); - } - if (quality.flippedTriangleCount + quality.zeroAreaTriangleCount == quality.totalTriangleCount) { - // If all triangles are flipped, then none are. + + void computeFlippedFaces(const Mesh *mesh, uint32_t faceCount, Array *flippedFaces) + { + totalTriangleCount = flippedTriangleCount = zeroAreaTriangleCount = 0; if (flippedFaces) flippedFaces->clear(); - quality.flippedTriangleCount = 0; - } - if (quality.flippedTriangleCount > quality.totalTriangleCount / 2) - { - // If more than half the triangles are flipped, reverse the flipped / not flipped classification. - quality.flippedTriangleCount = quality.totalTriangleCount - quality.flippedTriangleCount; - if (flippedFaces) { - Array temp; - flippedFaces->copyTo(temp); - flippedFaces->clear(); - for (uint32_t f = 0; f < faceCount; f++) { - bool match = false; - for (uint32_t ff = 0; ff < temp.size(); ff++) { - if (temp[ff] == f) { - match = true; - break; - } - } - if (!match) + for (uint32_t f = 0; f < faceCount; f++) { + Vector2 texcoord[3]; + for (int i = 0; i < 3; i++) { + const uint32_t v = mesh->vertexAt(f * 3 + i); + texcoord[i] = mesh->texcoord(v); + } + totalTriangleCount++; + const float t1 = texcoord[0].x; + const float s1 = texcoord[0].y; + const float t2 = texcoord[1].x; + const float s2 = texcoord[1].y; + const float t3 = texcoord[2].x; + const float s3 = texcoord[2].y; + const float parametricArea = ((s2 - s1) * (t3 - t1) - (s3 - s1) * (t2 - t1)) * 0.5f; + if (isZero(parametricArea, kAreaEpsilon)) { + zeroAreaTriangleCount++; + continue; + } + if (parametricArea < 0.0f) { + // Count flipped triangles. + flippedTriangleCount++; + if (flippedFaces) flippedFaces->push_back(f); } } + if (flippedTriangleCount + zeroAreaTriangleCount == totalTriangleCount) { + // If all triangles are flipped, then none are. + if (flippedFaces) + flippedFaces->clear(); + flippedTriangleCount = 0; + } + if (flippedTriangleCount > totalTriangleCount / 2) + { + // If more than half the triangles are flipped, reverse the flipped / not flipped classification. + flippedTriangleCount = totalTriangleCount - flippedTriangleCount; + if (flippedFaces) { + Array temp; + flippedFaces->copyTo(temp); + flippedFaces->clear(); + for (uint32_t f = 0; f < faceCount; f++) { + bool match = false; + for (uint32_t ff = 0; ff < temp.size(); ff++) { + if (temp[ff] == f) { + match = true; + break; + } + } + if (!match) + flippedFaces->push_back(f); + } + } + } } - XA_DEBUG_ASSERT(isFinite(quality.parametricArea) && quality.parametricArea >= 0); - XA_DEBUG_ASSERT(isFinite(quality.geometricArea) && quality.geometricArea >= 0); - XA_DEBUG_ASSERT(isFinite(quality.stretchMetric)); - XA_DEBUG_ASSERT(isFinite(quality.maxStretchMetric)); - XA_DEBUG_ASSERT(isFinite(quality.conformalMetric)); - XA_DEBUG_ASSERT(isFinite(quality.authalicMetric)); - if (quality.geometricArea <= 0.0f) { - quality.stretchMetric = 0.0f; - quality.maxStretchMetric = 0.0f; - quality.conformalMetric = 0.0f; - quality.authalicMetric = 0.0f; - } else { - const float normFactor = sqrtf(quality.parametricArea / quality.geometricArea); - quality.stretchMetric = sqrtf(quality.stretchMetric / quality.geometricArea) * normFactor; - quality.maxStretchMetric *= normFactor; - quality.conformalMetric = sqrtf(quality.conformalMetric / quality.geometricArea); - quality.authalicMetric = sqrtf(quality.authalicMetric / quality.geometricArea); + + void computeMetrics(const Mesh *mesh, uint32_t faceCount) + { + totalGeometricArea = totalParametricArea = 0.0f; + stretchMetric = maxStretchMetric = conformalMetric = authalicMetric = 0.0f; + for (uint32_t f = 0; f < faceCount; f++) { + Vector3 pos[3]; + Vector2 texcoord[3]; + for (int i = 0; i < 3; i++) { + const uint32_t v = mesh->vertexAt(f * 3 + i); + pos[i] = mesh->position(v); + texcoord[i] = mesh->texcoord(v); + } + // Evaluate texture stretch metric. See: + // - "Texture Mapping Progressive Meshes", Sander, Snyder, Gortler & Hoppe + // - "Mesh Parameterization: Theory and Practice", Siggraph'07 Course Notes, Hormann, Levy & Sheffer. + const float t1 = texcoord[0].x; + const float s1 = texcoord[0].y; + const float t2 = texcoord[1].x; + const float s2 = texcoord[1].y; + const float t3 = texcoord[2].x; + const float s3 = texcoord[2].y; + float parametricArea = ((s2 - s1) * (t3 - t1) - (s3 - s1) * (t2 - t1)) * 0.5f; + if (isZero(parametricArea, kAreaEpsilon)) + continue; + if (parametricArea < 0.0f) + parametricArea = fabsf(parametricArea); + const float geometricArea = length(cross(pos[1] - pos[0], pos[2] - pos[0])) / 2; + const Vector3 Ss = (pos[0] * (t2 - t3) + pos[1] * (t3 - t1) + pos[2] * (t1 - t2)) / (2 * parametricArea); + const Vector3 St = (pos[0] * (s3 - s2) + pos[1] * (s1 - s3) + pos[2] * (s2 - s1)) / (2 * parametricArea); + const float a = dot(Ss, Ss); // E + const float b = dot(Ss, St); // F + const float c = dot(St, St); // G + // Compute eigen-values of the first fundamental form: + const float sigma1 = sqrtf(0.5f * max(0.0f, a + c - sqrtf(square(a - c) + 4 * square(b)))); // gamma uppercase, min eigenvalue. + const float sigma2 = sqrtf(0.5f * max(0.0f, a + c + sqrtf(square(a - c) + 4 * square(b)))); // gamma lowercase, max eigenvalue. + XA_ASSERT(sigma2 > sigma1 || equal(sigma1, sigma2, kEpsilon)); + // isometric: sigma1 = sigma2 = 1 + // conformal: sigma1 / sigma2 = 1 + // authalic: sigma1 * sigma2 = 1 + const float rmsStretch = sqrtf((a + c) * 0.5f); + const float rmsStretch2 = sqrtf((square(sigma1) + square(sigma2)) * 0.5f); + XA_DEBUG_ASSERT(equal(rmsStretch, rmsStretch2, 0.01f)); + XA_UNUSED(rmsStretch2); + stretchMetric += square(rmsStretch) * geometricArea; + maxStretchMetric = max(maxStretchMetric, sigma2); + if (!isZero(sigma1, 0.000001f)) { + // sigma1 is zero when geometricArea is zero. + conformalMetric += (sigma2 / sigma1) * geometricArea; + } + authalicMetric += (sigma1 * sigma2) * geometricArea; + // Accumulate total areas. + totalGeometricArea += geometricArea; + totalParametricArea += parametricArea; + } + XA_DEBUG_ASSERT(isFinite(totalParametricArea) && totalParametricArea >= 0); + XA_DEBUG_ASSERT(isFinite(totalGeometricArea) && totalGeometricArea >= 0); + XA_DEBUG_ASSERT(isFinite(stretchMetric)); + XA_DEBUG_ASSERT(isFinite(maxStretchMetric)); + XA_DEBUG_ASSERT(isFinite(conformalMetric)); + XA_DEBUG_ASSERT(isFinite(authalicMetric)); + if (totalGeometricArea > 0.0f) { + const float normFactor = sqrtf(totalParametricArea / totalGeometricArea); + stretchMetric = sqrtf(stretchMetric / totalGeometricArea) * normFactor; + maxStretchMetric *= normFactor; + conformalMetric = sqrtf(conformalMetric / totalGeometricArea); + authalicMetric = sqrtf(authalicMetric / totalGeometricArea); + } } - return quality; -} +}; struct ChartWarningFlags { @@ -5706,24 +6629,30 @@ struct ChartWarningFlags }; }; +struct ChartCtorBuffers +{ + Array chartMeshIndices; + Array unifiedMeshIndices; + Array boundaryLoops; +}; + /// A chart is a connected set of faces with a certain topology (usually a disk). class Chart { public: - Chart(const segment::Atlas *atlas, const Mesh *originalMesh, uint32_t chartIndex, uint32_t meshId, uint32_t chartGroupId, uint32_t chartId) : m_mesh(nullptr), m_unifiedMesh(nullptr), m_isDisk(false), m_isOrtho(false), m_isPlanar(false), m_warningFlags(0), m_closedHolesCount(0), m_fixedTJunctionsCount(0) + Chart(ChartCtorBuffers &buffers, const Basis &basis, ConstArrayView faces, const Mesh *originalMesh, uint32_t meshId, uint32_t chartGroupId, uint32_t chartId) : m_basis(basis), m_mesh(nullptr), m_unifiedMesh(nullptr), m_unmodifiedUnifiedMesh(nullptr), m_type(ChartType::LSCM), m_warningFlags(0), m_closedHolesCount(0), m_fixedTJunctionsCount(0) { XA_UNUSED(meshId); XA_UNUSED(chartGroupId); XA_UNUSED(chartId); - m_basis = atlas->chartBasis(chartIndex); - atlas->chartFaces(chartIndex).copyTo(m_faceArray); + m_faceArray.copyFrom(faces.data, faces.length); // Copy face indices. m_mesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, originalMesh->epsilon(), m_faceArray.size() * 3, m_faceArray.size()); m_unifiedMesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, originalMesh->epsilon(), m_faceArray.size() * 3, m_faceArray.size()); - Array chartMeshIndices; + Array &chartMeshIndices = buffers.chartMeshIndices; chartMeshIndices.resize(originalMesh->vertexCount()); chartMeshIndices.setAll(UINT32_MAX); - Array unifiedMeshIndices; + Array &unifiedMeshIndices = buffers.unifiedMeshIndices; unifiedMeshIndices.resize(originalMesh->vertexCount()); unifiedMeshIndices.setAll(UINT32_MAX); // Add vertices. @@ -5735,11 +6664,7 @@ public: if (unifiedMeshIndices[unifiedVertex] == (uint32_t)~0) { unifiedMeshIndices[unifiedVertex] = m_unifiedMesh->vertexCount(); XA_DEBUG_ASSERT(equal(originalMesh->position(vertex), originalMesh->position(unifiedVertex), originalMesh->epsilon())); -#if XA_SKIP_PARAMETERIZATION - m_unifiedMesh->addVertex(originalMesh->position(vertex), Vector3(0.0f), atlas->faceTexcoords(m_faceArray[f])[i]); -#else m_unifiedMesh->addVertex(originalMesh->position(vertex)); -#endif } if (chartMeshIndices[vertex] == (uint32_t)~0) { chartMeshIndices[vertex] = m_mesh->vertexCount(); @@ -5774,11 +6699,10 @@ public: } m_mesh->createBoundaries(); // For AtlasPacker::computeBoundingBox m_unifiedMesh->createBoundaries(); - m_unifiedMesh->linkBoundaries(); - m_isPlanar = meshIsPlanar(*m_unifiedMesh); - if (m_isPlanar) { - m_isDisk = true; - } else { + if (meshIsPlanar(*m_unifiedMesh)) + m_type = ChartType::Planar; + else { + m_unifiedMesh->linkBoundaries(); #if XA_DEBUG_EXPORT_OBJ_BEFORE_FIX_TJUNCTION m_unifiedMesh->writeObjFile("debug_before_fix_tjunction.obj"); #endif @@ -5791,15 +6715,14 @@ public: m_warningFlags |= ChartWarningFlags::FixTJunctionsDuplicatedEdge; if (failed) m_warningFlags |= ChartWarningFlags::FixTJunctionsFailed; - m_unifiedMesh->~Mesh(); - XA_FREE(m_unifiedMesh); + m_unmodifiedUnifiedMesh = m_unifiedMesh; m_unifiedMesh = fixedUnifiedMesh; m_unifiedMesh->createBoundaries(); m_unifiedMesh->linkBoundaries(); m_initialFaceCount = m_unifiedMesh->faceCount(); // Fixing t-junctions rewrites faces. } // See if there are any holes that need closing. - Array boundaryLoops; + Array &boundaryLoops = buffers.boundaryLoops; meshGetBoundaryLoops(*m_unifiedMesh, boundaryLoops); if (boundaryLoops.size() > 1) { #if XA_DEBUG_EXPORT_OBJ_CLOSE_HOLES_ERROR @@ -5810,16 +6733,21 @@ public: // - Find cuts that reduce genus. // - Find cuts to connect holes. // - Use minimal spanning trees or seamster. - Array holeFaceCounts; XA_PROFILE_START(closeChartMeshHoles) - failed = !meshCloseHoles(m_unifiedMesh, boundaryLoops, m_basis.normal, holeFaceCounts); + uint32_t holeCount = 0; +#if XA_DEBUG_EXPORT_OBJ_CLOSE_HOLES_ERROR + Array holeFaceCounts; + failed = !meshCloseHoles(m_unifiedMesh, boundaryLoops, m_basis.normal, &holeFaceCounts); +#else + failed = !meshCloseHoles(m_unifiedMesh, boundaryLoops, m_basis.normal, &holeCount, nullptr); +#endif XA_PROFILE_END(closeChartMeshHoles) m_unifiedMesh->createBoundaries(); m_unifiedMesh->linkBoundaries(); meshGetBoundaryLoops(*m_unifiedMesh, boundaryLoops); if (failed || boundaryLoops.size() > 1) m_warningFlags |= ChartWarningFlags::CloseHolesFailed; - m_closedHolesCount = holeFaceCounts.size(); + m_closedHolesCount = holeCount; #if XA_DEBUG_EXPORT_OBJ_CLOSE_HOLES_ERROR if (m_warningFlags & ChartWarningFlags::CloseHolesFailed) { char filename[256]; @@ -5848,19 +6776,76 @@ public: } #endif } - // Note: MeshTopology needs linked boundaries. - MeshTopology topology(m_unifiedMesh); - m_isDisk = topology.isDisk(); -#if XA_DEBUG_EXPORT_OBJ_NOT_DISK - if (!m_isDisk) { - char filename[256]; - XA_SPRINTF(filename, sizeof(filename), "debug_mesh_%03u_chartgroup_%03u_chart_%03u_not_disk.obj", meshId, chartGroupId, chartId); - m_unifiedMesh->writeObjFile(filename); - } -#endif } } +#if XA_RECOMPUTE_CHARTS + Chart(ChartCtorBuffers &buffers, const Chart *parent, const Mesh *parentMesh, ConstArrayView faces, const Vector2 *texcoords, const Mesh *originalMesh, uint32_t meshId, uint32_t chartGroupId, uint32_t chartId) : m_mesh(nullptr), m_unifiedMesh(nullptr), m_unmodifiedUnifiedMesh(nullptr), m_type(ChartType::Piecewise), m_warningFlags(0), m_closedHolesCount(0), m_fixedTJunctionsCount(0) + { + XA_UNUSED(meshId); + XA_UNUSED(chartGroupId); + XA_UNUSED(chartId); + const uint32_t faceCount = m_initialFaceCount = faces.length; + m_faceArray.resize(faceCount); + for (uint32_t i = 0; i < faceCount; i++) + m_faceArray[i] = parent->m_faceArray[faces[i]]; // Map faces to parent chart original mesh. + // Copy face indices. + m_mesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, originalMesh->epsilon(), m_faceArray.size() * 3, m_faceArray.size()); + m_unifiedMesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, originalMesh->epsilon(), m_faceArray.size() * 3, m_faceArray.size()); + Array &chartMeshIndices = buffers.chartMeshIndices; + chartMeshIndices.resize(originalMesh->vertexCount()); + chartMeshIndices.setAll(UINT32_MAX); + Array &unifiedMeshIndices = buffers.unifiedMeshIndices; + unifiedMeshIndices.resize(originalMesh->vertexCount()); + unifiedMeshIndices.setAll(UINT32_MAX); + // Add vertices. + for (uint32_t f = 0; f < faceCount; f++) { + for (uint32_t i = 0; i < 3; i++) { + const uint32_t vertex = originalMesh->vertexAt(m_faceArray[f] * 3 + i); + const uint32_t unifiedVertex = originalMesh->firstColocal(vertex); + const uint32_t parentVertex = parentMesh->vertexAt(faces[f] * 3 + i); + if (unifiedMeshIndices[unifiedVertex] == (uint32_t)~0) { + unifiedMeshIndices[unifiedVertex] = m_unifiedMesh->vertexCount(); + XA_DEBUG_ASSERT(equal(originalMesh->position(vertex), originalMesh->position(unifiedVertex), originalMesh->epsilon())); + m_unifiedMesh->addVertex(originalMesh->position(vertex), Vector3(0.0f), texcoords[parentVertex]); + } + if (chartMeshIndices[vertex] == (uint32_t)~0) { + chartMeshIndices[vertex] = m_mesh->vertexCount(); + m_chartToOriginalMap.push_back(vertex); + m_chartToUnifiedMap.push_back(unifiedMeshIndices[unifiedVertex]); + m_mesh->addVertex(originalMesh->position(vertex), Vector3(0.0f), texcoords[parentVertex]); + } + } + } + // Add faces. + for (uint32_t f = 0; f < faceCount; f++) { + uint32_t indices[3], unifiedIndices[3]; + for (uint32_t i = 0; i < 3; i++) { + const uint32_t vertex = originalMesh->vertexAt(m_faceArray[f] * 3 + i); + indices[i] = chartMeshIndices[vertex]; + unifiedIndices[i] = unifiedMeshIndices[originalMesh->firstColocal(vertex)]; + } + Mesh::AddFaceResult::Enum result = m_mesh->addFace(indices); + XA_UNUSED(result); + XA_DEBUG_ASSERT(result == Mesh::AddFaceResult::OK); +#if XA_DEBUG + // Unifying colocals may create degenerate edges. e.g. if two triangle vertices are colocal. + for (int i = 0; i < 3; i++) { + const uint32_t index1 = unifiedIndices[i]; + const uint32_t index2 = unifiedIndices[(i + 1) % 3]; + XA_DEBUG_ASSERT(index1 != index2); + } +#endif + result = m_unifiedMesh->addFace(unifiedIndices); + XA_UNUSED(result); + XA_DEBUG_ASSERT(result == Mesh::AddFaceResult::OK); + } + m_mesh->createBoundaries(); // For AtlasPacker::computeBoundingBox + m_unifiedMesh->createBoundaries(); + m_unifiedMesh->linkBoundaries(); + } +#endif + ~Chart() { if (m_mesh) { @@ -5871,16 +6856,19 @@ public: m_unifiedMesh->~Mesh(); XA_FREE(m_unifiedMesh); } + if (m_unmodifiedUnifiedMesh) { + m_unmodifiedUnifiedMesh->~Mesh(); + XA_FREE(m_unmodifiedUnifiedMesh); + } } const Basis &basis() const { return m_basis; } - bool isDisk() const { return m_isDisk; } - bool isOrtho() const { return m_isOrtho; } - bool isPlanar() const { return m_isPlanar; } + ChartType::Enum type() const { return m_type; } uint32_t warningFlags() const { return m_warningFlags; } uint32_t closedHolesCount() const { return m_closedHolesCount; } uint32_t fixedTJunctionsCount() const { return m_fixedTJunctionsCount; } - const ParameterizationQuality ¶mQuality() const { return m_paramQuality; } + const Quality &quality() const { return m_quality; } + uint32_t initialFaceCount() const { return m_initialFaceCount; } #if XA_DEBUG_EXPORT_OBJ_INVALID_PARAMETERIZATION const Array ¶mFlippedFaces() const { return m_paramFlippedFaces; } #endif @@ -5889,26 +6877,31 @@ public: Mesh *mesh() { return m_mesh; } const Mesh *unifiedMesh() const { return m_unifiedMesh; } Mesh *unifiedMesh() { return m_unifiedMesh; } + const Mesh *unmodifiedUnifiedMesh() const { return m_unmodifiedUnifiedMesh; } uint32_t mapChartVertexToOriginalVertex(uint32_t i) const { return m_chartToOriginalMap[i]; } - void evaluateOrthoParameterizationQuality() + void evaluateOrthoQuality(UniformGrid2 &boundaryGrid) { XA_PROFILE_START(parameterizeChartsEvaluateQuality) - m_paramQuality = calculateParameterizationQuality(m_unifiedMesh, m_initialFaceCount, nullptr); + m_quality.computeBoundaryIntersection(m_unifiedMesh, boundaryGrid); + m_quality.computeFlippedFaces(m_unifiedMesh, m_initialFaceCount, nullptr); + m_quality.computeMetrics(m_unifiedMesh, m_initialFaceCount); XA_PROFILE_END(parameterizeChartsEvaluateQuality) // Use orthogonal parameterization if quality is acceptable. - if (!m_paramQuality.boundaryIntersection && m_paramQuality.geometricArea > 0.0f && m_paramQuality.stretchMetric <= 1.1f && m_paramQuality.maxStretchMetric <= 1.25f) - m_isOrtho = true; + if (!m_quality.boundaryIntersection && m_quality.totalGeometricArea > 0.0f && m_quality.stretchMetric <= 1.1f && m_quality.maxStretchMetric <= 1.25f) + m_type = ChartType::Ortho; } - void evaluateParameterizationQuality() + void evaluateQuality(UniformGrid2 &boundaryGrid) { XA_PROFILE_START(parameterizeChartsEvaluateQuality) + m_quality.computeBoundaryIntersection(m_unifiedMesh, boundaryGrid); #if XA_DEBUG_EXPORT_OBJ_INVALID_PARAMETERIZATION - m_paramQuality = calculateParameterizationQuality(m_unifiedMesh, m_initialFaceCount, &m_paramFlippedFaces); + m_quality.computeFlippedFaces(m_unifiedMesh, m_initialFaceCount, &m_paramFlippedFaces); #else - m_paramQuality = calculateParameterizationQuality(m_unifiedMesh, m_initialFaceCount, nullptr); + m_quality.computeFlippedFaces(m_unifiedMesh, m_initialFaceCount, nullptr); #endif + // Don't need to call computeMetrics here, that's only used in evaluateOrthoQuality to determine if quality is acceptable enough to use ortho projection. XA_PROFILE_END(parameterizeChartsEvaluateQuality) } @@ -5920,16 +6913,6 @@ public: m_mesh->texcoord(v) = m_unifiedMesh->texcoord(m_chartToUnifiedMap[v]); } - float computeSurfaceArea() const - { - return m_mesh->computeSurfaceArea(); - } - - float computeParametricArea() const - { - return m_mesh->computeParametricArea(); - } - Vector2 computeParametricBounds() const { Vector2 minCorner(FLT_MAX, FLT_MAX); @@ -5946,7 +6929,8 @@ private: Basis m_basis; Mesh *m_mesh; Mesh *m_unifiedMesh; - bool m_isDisk, m_isOrtho, m_isPlanar; + Mesh *m_unmodifiedUnifiedMesh; // Unified mesh before fixing t-junctions. Null if no t-junctions were fixed + ChartType::Enum m_type; uint32_t m_warningFlags; uint32_t m_initialFaceCount; // Before fixing T-junctions and/or closing holes. uint32_t m_closedHolesCount, m_fixedTJunctionsCount; @@ -5959,7 +6943,7 @@ private: Array m_chartToUnifiedMap; - ParameterizationQuality m_paramQuality; + Quality m_quality; #if XA_DEBUG_EXPORT_OBJ_INVALID_PARAMETERIZATION Array m_paramFlippedFaces; #endif @@ -5967,12 +6951,13 @@ private: struct CreateChartTaskArgs { - const segment::Atlas *atlas; const Mesh *mesh; - uint32_t chartIndex; // In the atlas. + const Basis *basis; + ConstArrayView faces; uint32_t meshId; uint32_t chartGroupId; uint32_t chartId; + ThreadLocal *chartBuffers; Chart **chart; }; @@ -5980,7 +6965,7 @@ static void runCreateChartTask(void *userData) { XA_PROFILE_START(createChartMeshesThread) auto args = (CreateChartTaskArgs *)userData; - *(args->chart) = XA_NEW_ARGS(MemTag::Default, Chart, args->atlas, args->mesh, args->chartIndex, args->meshId, args->chartGroupId, args->chartId); + *(args->chart) = XA_NEW_ARGS(MemTag::Default, Chart, args->chartBuffers->get(), *(args->basis), args->faces, args->mesh, args->meshId, args->chartGroupId, args->chartId); XA_PROFILE_END(createChartMeshesThread) } @@ -5988,6 +6973,7 @@ struct ParameterizeChartTaskArgs { Chart *chart; ParameterizeFunc func; + ThreadLocal *boundaryGrid; }; static void runParameterizeChartTask(void *userData) @@ -5995,24 +6981,26 @@ static void runParameterizeChartTask(void *userData) auto args = (ParameterizeChartTaskArgs *)userData; Mesh *mesh = args->chart->unifiedMesh(); XA_PROFILE_START(parameterizeChartsOrthogonal) -#if 1 - computeOrthogonalProjectionMap(mesh); -#else - for (uint32_t i = 0; i < vertexCount; i++) - mesh->texcoord(i) = Vector2(dot(args->chart->basis().tangent, mesh->position(i)), dot(args->chart->basis().bitangent, mesh->position(i))); -#endif + { + // Project vertices to plane. + const uint32_t vertexCount = mesh->vertexCount(); + const Basis &basis = args->chart->basis(); + for (uint32_t i = 0; i < vertexCount; i++) + mesh->texcoord(i) = Vector2(dot(basis.tangent, mesh->position(i)), dot(basis.bitangent, mesh->position(i))); + } XA_PROFILE_END(parameterizeChartsOrthogonal) - args->chart->evaluateOrthoParameterizationQuality(); - if (!args->chart->isOrtho() && !args->chart->isPlanar()) { + // Computing charts checks for flipped triangles and boundary intersection. Don't need to do that again here if chart is planar. + if (args->chart->type() != ChartType::Planar) + args->chart->evaluateOrthoQuality(args->boundaryGrid->get()); + if (args->chart->type() == ChartType::LSCM) { XA_PROFILE_START(parameterizeChartsLSCM) if (args->func) args->func(&mesh->position(0).x, &mesh->texcoord(0).x, mesh->vertexCount(), mesh->indices(), mesh->indexCount()); - else if (args->chart->isDisk()) + else computeLeastSquaresConformalMap(mesh); XA_PROFILE_END(parameterizeChartsLSCM) - args->chart->evaluateParameterizationQuality(); + args->chart->evaluateQuality(args->boundaryGrid->get()); } - // @@ Check that parameterization quality is above a certain threshold. // Transfer parameterization from unified mesh to chart mesh. args->chart->transferParameterization(); } @@ -6021,27 +7009,33 @@ static void runParameterizeChartTask(void *userData) class ChartGroup { public: - ChartGroup(uint32_t id, const Mesh *sourceMesh, uint32_t faceGroup) : m_sourceId(sourceMesh->id()), m_id(id), m_isVertexMap(faceGroup == UINT32_MAX), m_paramAddedChartsCount(0), m_paramDeletedChartsCount(0) + ChartGroup(uint32_t id, const Mesh *sourceMesh, uint16_t faceGroup) : m_sourceId(sourceMesh->id()), m_id(id), m_isVertexMap(faceGroup == Mesh::kInvalidFaceGroup), m_paramAddedChartsCount(0), m_paramDeletedChartsCount(0) { // Create new mesh from the source mesh, using faces that belong to this group. const uint32_t sourceFaceCount = sourceMesh->faceCount(); - for (uint32_t f = 0; f < sourceFaceCount; f++) { - if (sourceMesh->faceGroupAt(f) == faceGroup) - m_faceToSourceFaceMap.push_back(f); + if (!m_isVertexMap) { + m_faceToSourceFaceMap.reserve(sourceMesh->faceGroupFaceCount(faceGroup)); + for (Mesh::GroupFaceIterator it(sourceMesh, faceGroup); !it.isDone(); it.advance()) + m_faceToSourceFaceMap.push_back(it.face()); + } else { + for (uint32_t f = 0; f < sourceFaceCount; f++) { + if (sourceMesh->faceGroupAt(f) == faceGroup) + m_faceToSourceFaceMap.push_back(f); + } } // Only initial meshes have face groups and ignored faces. The only flag we care about is HasNormals. const uint32_t faceCount = m_faceToSourceFaceMap.size(); - m_mesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, sourceMesh->epsilon(), faceCount * 3, faceCount, sourceMesh->flags() & MeshFlags::HasNormals); XA_DEBUG_ASSERT(faceCount > 0); - Array meshIndices; - meshIndices.resize(sourceMesh->vertexCount()); - meshIndices.setAll((uint32_t)~0); + const uint32_t approxVertexCount = faceCount * 3; + m_mesh = XA_NEW_ARGS(MemTag::Mesh, Mesh, sourceMesh->epsilon(), approxVertexCount, faceCount, sourceMesh->flags() & MeshFlags::HasNormals); + m_vertexToSourceVertexMap.reserve(approxVertexCount); + HashMap sourceVertexToVertexMap(MemTag::Mesh, approxVertexCount); for (uint32_t f = 0; f < faceCount; f++) { const uint32_t face = m_faceToSourceFaceMap[f]; for (uint32_t i = 0; i < 3; i++) { const uint32_t vertex = sourceMesh->vertexAt(face * 3 + i); - if (meshIndices[vertex] == (uint32_t)~0) { - meshIndices[vertex] = m_mesh->vertexCount(); + if (sourceVertexToVertexMap.get(vertex) == UINT32_MAX) { + sourceVertexToVertexMap.add(vertex); m_vertexToSourceVertexMap.push_back(vertex); Vector3 normal(0.0f); if (sourceMesh->flags() & MeshFlags::HasNormals) @@ -6056,8 +7050,8 @@ public: uint32_t indices[3]; for (uint32_t i = 0; i < 3; i++) { const uint32_t vertex = sourceMesh->vertexAt(face * 3 + i); - XA_DEBUG_ASSERT(meshIndices[vertex] != (uint32_t)~0); - indices[i] = meshIndices[vertex]; + indices[i] = sourceVertexToVertexMap.get(vertex); + XA_DEBUG_ASSERT(indices[i] != UINT32_MAX); } // Don't copy flags, it doesn't matter if a face is ignored after this point. All ignored faces get their own vertex map (m_isVertexMap) ChartGroup. // Don't hash edges if m_isVertexMap, they may be degenerate. @@ -6068,7 +7062,6 @@ public: if (!m_isVertexMap) { m_mesh->createColocals(); m_mesh->createBoundaries(); - m_mesh->linkBoundaries(); } #if XA_DEBUG_EXPORT_OBJ_CHART_GROUPS char filename[256]; @@ -6083,14 +7076,14 @@ public: { m_mesh->~Mesh(); XA_FREE(m_mesh); - for (uint32_t i = 0; i < m_chartArray.size(); i++) { - m_chartArray[i]->~Chart(); - XA_FREE(m_chartArray[i]); + for (uint32_t i = 0; i < m_charts.size(); i++) { + m_charts[i]->~Chart(); + XA_FREE(m_charts[i]); } } - uint32_t chartCount() const { return m_chartArray.size(); } - Chart *chartAt(uint32_t i) const { return m_chartArray[i]; } + uint32_t chartCount() const { return m_charts.size(); } + Chart *chartAt(uint32_t i) const { return m_charts[i]; } uint32_t paramAddedChartsCount() const { return m_paramAddedChartsCount; } uint32_t paramDeletedChartsCount() const { return m_paramDeletedChartsCount; } bool isVertexMap() const { return m_isVertexMap; } @@ -6158,40 +7151,41 @@ public: - emphasize roundness metrics to prevent those cases. - If interior self-overlaps: preserve boundary parameterization and use mean-value map. */ - void computeCharts(TaskScheduler *taskScheduler, const ChartOptions &options) + void computeCharts(TaskScheduler *taskScheduler, const ChartOptions &options, segment::Atlas &atlas, ThreadLocal *chartBuffers) { m_chartOptions = options; // This function may be called multiple times, so destroy existing charts. - for (uint32_t i = 0; i < m_chartArray.size(); i++) { - m_chartArray[i]->~Chart(); - XA_FREE(m_chartArray[i]); + for (uint32_t i = 0; i < m_charts.size(); i++) { + m_charts[i]->~Chart(); + XA_FREE(m_charts[i]); } - m_chartArray.clear(); + m_charts.clear(); #if XA_DEBUG_SINGLE_CHART Array chartFaces; chartFaces.resize(m_mesh->faceCount()); for (uint32_t i = 0; i < chartFaces.size(); i++) chartFaces[i] = i; Chart *chart = XA_NEW_ARGS(MemTag::Default, Chart, m_mesh, chartFaces, m_sourceId, m_id, 0); - m_chartArray.push_back(chart); + m_charts.push_back(chart); #else XA_PROFILE_START(buildAtlas) - segment::Atlas atlas(m_mesh, nullptr, options); + atlas.reset(m_sourceId, m_id, m_mesh, options); buildAtlas(atlas, options); XA_PROFILE_END(buildAtlas) const uint32_t chartCount = atlas.chartCount(); - m_chartArray.resize(chartCount); + m_charts.resize(chartCount); Array taskArgs; taskArgs.resize(chartCount); for (uint32_t i = 0; i < chartCount; i++) { CreateChartTaskArgs &args = taskArgs[i]; - args.atlas = &atlas; + args.basis = &atlas.chartBasis(i); + args.faces = atlas.chartFaces(i); args.mesh = m_mesh; - args.chartIndex = i; args.meshId = m_sourceId; args.chartGroupId = m_id; args.chartId = i; - args.chart = &m_chartArray[i]; + args.chartBuffers = chartBuffers; + args.chart = &m_charts[i]; } XA_PROFILE_START(createChartMeshesReal) TaskGroupHandle taskGroup = taskScheduler->createTaskGroup(chartCount); @@ -6225,26 +7219,22 @@ public: #endif } - void parameterizeCharts(TaskScheduler *taskScheduler, ParameterizeFunc func) - { - const uint32_t chartCount = m_chartArray.size(); -#if XA_SKIP_PARAMETERIZATION - XA_UNUSED(taskScheduler); - XA_UNUSED(func); - for (uint32_t i = 0; i < chartCount; i++) { - Chart *chart = m_chartArray[i]; - chart->evaluateOrthoParameterizationQuality(); - chart->evaluateParameterizationQuality(); - chart->transferParameterization(); - } +#if XA_RECOMPUTE_CHARTS + void parameterizeCharts(TaskScheduler *taskScheduler, ParameterizeFunc func, ThreadLocal *boundaryGrid, ThreadLocal *chartBuffers, ThreadLocal *piecewiseParam) #else + void parameterizeCharts(TaskScheduler* taskScheduler, ParameterizeFunc func, ThreadLocal* boundaryGrid, ThreadLocal* /*chartBuffers*/) +#endif + { + m_paramAddedChartsCount = 0; + const uint32_t chartCount = m_charts.size(); Array taskArgs; taskArgs.resize(chartCount); TaskGroupHandle taskGroup = taskScheduler->createTaskGroup(chartCount); for (uint32_t i = 0; i < chartCount; i++) { ParameterizeChartTaskArgs &args = taskArgs[i]; - args.chart = m_chartArray[i]; + args.chart = m_charts[i]; args.func = func; + args.boundaryGrid = boundaryGrid; Task task; task.userData = &args; task.func = runParameterizeChartTask; @@ -6255,67 +7245,65 @@ public: // Find charts with invalid parameterizations. Array invalidCharts; for (uint32_t i = 0; i < chartCount; i++) { - Chart *chart = m_chartArray[i]; - const ParameterizationQuality &quality = chart->paramQuality(); + Chart *chart = m_charts[i]; + const Quality &quality = chart->quality(); if (quality.boundaryIntersection || quality.flippedTriangleCount > 0) invalidCharts.push_back(chart); } if (invalidCharts.isEmpty()) return; // Recompute charts with invalid parameterizations. - Array meshFaces; + PiecewiseParam &pp = piecewiseParam->get(); for (uint32_t i = 0; i < invalidCharts.size(); i++) { Chart *invalidChart = invalidCharts[i]; - const Mesh *invalidMesh = invalidChart->mesh(); - const uint32_t faceCount = invalidMesh->faceCount(); - meshFaces.resize(faceCount); - float invalidChartArea = 0.0f; - for (uint32_t j = 0; j < faceCount; j++) { - meshFaces[j] = invalidChart->mapFaceToSourceFace(j); - invalidChartArea += invalidMesh->faceArea(j); + // Fixing t-junctions rewrites unified mesh faces, and we need to map faces back to input mesh. So use the unmodified unified mesh. + const Mesh *invalidMesh = invalidChart->unmodifiedUnifiedMesh(); + uint32_t faceCount = 0; + if (invalidMesh) { + faceCount = invalidMesh->faceCount(); + } else { + invalidMesh = invalidChart->unifiedMesh(); + faceCount = invalidChart->initialFaceCount(); // Not invalidMesh->faceCount(). Don't want faces added by hole closing. } - ChartOptions options = m_chartOptions; - options.maxChartArea = invalidChartArea * 0.2f; - options.maxThreshold = 0.25f; - options.maxIterations = 3; - segment::Atlas atlas(m_mesh, &meshFaces, options); - buildAtlas(atlas, options); - for (uint32_t j = 0; j < atlas.chartCount(); j++) { - Chart *chart = XA_NEW_ARGS(MemTag::Default, Chart, &atlas, m_mesh, j, m_sourceId, m_id, m_chartArray.size()); - m_chartArray.push_back(chart); + pp.reset(invalidMesh, faceCount); +#if XA_DEBUG_EXPORT_OBJ_RECOMPUTED_CHARTS + char filename[256]; + XA_SPRINTF(filename, sizeof(filename), "debug_mesh_%03u_chartgroup_%03u_recomputed_chart_%03u.obj", m_sourceId, m_id, m_paramAddedChartsCount); + FILE *file; + XA_FOPEN(file, filename, "w"); + uint32_t subChartIndex = 0; +#endif + for (;;) { + if (!pp.computeChart()) + break; + Chart *chart = XA_NEW_ARGS(MemTag::Default, Chart, chartBuffers->get(), invalidChart, invalidMesh, pp.chartFaces(), pp.texcoords(), m_mesh, m_sourceId, m_id, m_charts.size()); + m_charts.push_back(chart); +#if XA_DEBUG_EXPORT_OBJ_RECOMPUTED_CHARTS + if (file) { + for (uint32_t j = 0; j < invalidMesh->vertexCount(); j++) { + fprintf(file, "v %g %g %g\n", invalidMesh->position(j).x, invalidMesh->position(j).y, invalidMesh->position(j).z); + fprintf(file, "vt %g %g\n", pp.texcoords()[j].x, pp.texcoords()[j].y); + } + fprintf(file, "o chart%03u\n", subChartIndex); + fprintf(file, "s off\n"); + for (uint32_t f = 0; f < pp.chartFaces().length; f++) { + fprintf(file, "f "); + const uint32_t face = pp.chartFaces()[f]; + for (uint32_t j = 0; j < 3; j++) { + const uint32_t index = invalidMesh->vertexCount() * subChartIndex + invalidMesh->vertexAt(face * 3 + j) + 1; // 1-indexed + fprintf(file, "%d/%d/%c", index, index, j == 2 ? '\n' : ' '); + } + } + } + subChartIndex++; +#endif m_paramAddedChartsCount++; } #if XA_DEBUG_EXPORT_OBJ_RECOMPUTED_CHARTS - char filename[256]; - XA_SPRINTF(filename, sizeof(filename), "debug_mesh_%03u_chartgroup_%03u_recomputed_chart_%u.obj", m_sourceId, m_id, i); - FILE *file; - XA_FOPEN(file, filename, "w"); - if (file) { - m_mesh->writeObjVertices(file); - for (uint32_t j = 0; j < builder.chartCount(); j++) { - fprintf(file, "o chart_%04d\n", j); - fprintf(file, "s off\n"); - const Array &faces = builder.chartFaces(j); - for (uint32_t f = 0; f < faces.size(); f++) - m_mesh->writeObjFace(file, faces[f]); - } + if (file) fclose(file); - } #endif } - // Parameterize the new charts. - taskGroup = taskScheduler->createTaskGroup(m_chartArray.size() - chartCount); - taskArgs.resize(m_chartArray.size() - chartCount); - for (uint32_t i = chartCount; i < m_chartArray.size(); i++) { - ParameterizeChartTaskArgs &args = taskArgs[i - chartCount]; - args.chart = m_chartArray[i]; - args.func = func; - Task task; - task.userData = &args; - task.func = runParameterizeChartTask; - taskScheduler->run(taskGroup, task); - } - taskScheduler->wait(&taskGroup); // Remove and delete the invalid charts. for (uint32_t i = 0; i < invalidCharts.size(); i++) { Chart *chart = invalidCharts[i]; @@ -6325,7 +7313,6 @@ public: m_paramDeletedChartsCount++; } #endif // XA_RECOMPUTE_CHARTS -#endif // XA_SKIP_PARAMETERIZATION } private: @@ -6343,19 +7330,18 @@ private: atlas.resetCharts(); // Restart process growing charts in parallel. uint32_t iteration = 0; - while (true) { - if (!atlas.growCharts(options.maxThreshold)) { - // If charts cannot grow more: fill holes, merge charts, relocate seeds and start new iteration. - atlas.fillHoles(options.maxThreshold * 0.5f); + for (;;) { + atlas.growCharts(options.maxThreshold); + // When charts cannot grow more: fill holes, merge charts, relocate seeds and start new iteration. + atlas.fillHoles(options.maxThreshold * 0.5f); #if XA_MERGE_CHARTS - atlas.mergeCharts(); + atlas.mergeCharts(); #endif - if (++iteration == options.maxIterations) - break; - if (!atlas.relocateSeeds()) - break; - atlas.resetCharts(); - } + if (++iteration == options.maxIterations) + break; + if (!atlas.relocateSeeds()) + break; + atlas.resetCharts(); } // Make sure no holes are left! XA_DEBUG_ASSERT(atlas.facesLeft() == 0); @@ -6363,9 +7349,9 @@ private: void removeChart(const Chart *chart) { - for (uint32_t i = 0; i < m_chartArray.size(); i++) { - if (m_chartArray[i] == chart) { - m_chartArray.removeAt(i); + for (uint32_t i = 0; i < m_charts.size(); i++) { + if (m_charts[i] == chart) { + m_charts.removeAt(i); return; } } @@ -6376,7 +7362,7 @@ private: Mesh *m_mesh; Array m_faceToSourceFaceMap; // List of faces of the source mesh that belong to this chart group. Array m_vertexToSourceVertexMap; // Map vertices of the mesh to vertices of the source mesh. - Array m_chartArray; + Array m_charts; ChartOptions m_chartOptions; uint32_t m_paramAddedChartsCount; // Number of new charts added by recomputing charts with invalid parameterizations. uint32_t m_paramDeletedChartsCount; // Number of charts with invalid parameterizations that were deleted, after charts were recomputed. @@ -6384,7 +7370,7 @@ private: struct CreateChartGroupTaskArgs { - uint32_t faceGroup; + uint16_t faceGroup; uint32_t groupId; const Mesh *mesh; ChartGroup **chartGroup; @@ -6402,6 +7388,8 @@ struct ComputeChartsTaskArgs { TaskScheduler *taskScheduler; ChartGroup *chartGroup; + ThreadLocal *atlas; + ThreadLocal *chartBuffers; const ChartOptions *options; Progress *progress; }; @@ -6412,7 +7400,7 @@ static void runComputeChartsJob(void *userData) if (args->progress->cancel) return; XA_PROFILE_START(computeChartsThread) - args->chartGroup->computeCharts(args->taskScheduler, *args->options); + args->chartGroup->computeCharts(args->taskScheduler, *args->options, args->atlas->get(), args->chartBuffers); XA_PROFILE_END(computeChartsThread) args->progress->value++; args->progress->update(); @@ -6423,6 +7411,11 @@ struct ParameterizeChartsTaskArgs TaskScheduler *taskScheduler; ChartGroup *chartGroup; ParameterizeFunc func; + ThreadLocal *boundaryGrid; + ThreadLocal *chartBuffers; +#if XA_RECOMPUTE_CHARTS + ThreadLocal *piecewiseParam; +#endif Progress *progress; }; @@ -6432,7 +7425,11 @@ static void runParameterizeChartsJob(void *userData) if (args->progress->cancel) return; XA_PROFILE_START(parameterizeChartsThread) - args->chartGroup->parameterizeCharts(args->taskScheduler, args->func); +#if XA_RECOMPUTE_CHARTS + args->chartGroup->parameterizeCharts(args->taskScheduler, args->func, args->boundaryGrid, args->chartBuffers, args->piecewiseParam); +#else + args->chartGroup->parameterizeCharts(args->taskScheduler, args->func, args->boundaryGrid, args->chartBuffers); +#endif XA_PROFILE_END(parameterizeChartsThread) args->progress->value++; args->progress->update(); @@ -6482,31 +7479,17 @@ public: // This function is thread safe. void addMesh(TaskScheduler *taskScheduler, const Mesh *mesh) { - // Get list of face groups. - const uint32_t faceCount = mesh->faceCount(); - Array faceGroups; - for (uint32_t f = 0; f < faceCount; f++) { - const uint32_t group = mesh->faceGroupAt(f); - bool exists = false; - for (uint32_t g = 0; g < faceGroups.size(); g++) { - if (faceGroups[g] == group) { - exists = true; - break; - } - } - if (!exists) - faceGroups.push_back(group); - } // Create one chart group per face group. + // If there's any ignored faces in the mesh, create an extra face group for that (vertex map). // Chart group creation is slow since it copies a chunk of the source mesh, so use tasks. Array chartGroups; - chartGroups.resize(faceGroups.size()); + chartGroups.resize(mesh->faceGroupCount() + (mesh->ignoredFaceCount() > 0 ? 1 : 0)); Array taskArgs; taskArgs.resize(chartGroups.size()); for (uint32_t g = 0; g < chartGroups.size(); g++) { CreateChartGroupTaskArgs &args = taskArgs[g]; args.chartGroup = &chartGroups[g]; - args.faceGroup = faceGroups[g]; + args.faceGroup = uint16_t(g < mesh->faceGroupCount() ? g : Mesh::kInvalidFaceGroup); args.groupId = g; args.mesh = mesh; } @@ -6561,6 +7544,8 @@ public: chartGroupCount++; } Progress progress(ProgressCategory::ComputeCharts, progressFunc, progressUserData, chartGroupCount); + ThreadLocal atlas; + ThreadLocal chartBuffers; Array taskArgs; taskArgs.reserve(chartGroupCount); for (uint32_t i = 0; i < m_chartGroups.size(); i++) { @@ -6568,6 +7553,8 @@ public: ComputeChartsTaskArgs args; args.taskScheduler = taskScheduler; args.chartGroup = m_chartGroups[i]; + args.atlas = &atlas; + args.chartBuffers = &chartBuffers; args.options = &options; args.progress = &progress; taskArgs.push_back(args); @@ -6605,6 +7592,11 @@ public: chartGroupCount++; } Progress progress(ProgressCategory::ParameterizeCharts, progressFunc, progressUserData, chartGroupCount); + ThreadLocal boundaryGrid; // For Quality boundary intersection. + ThreadLocal chartBuffers; +#if XA_RECOMPUTE_CHARTS + ThreadLocal piecewiseParam; +#endif Array taskArgs; taskArgs.reserve(chartGroupCount); for (uint32_t i = 0; i < m_chartGroups.size(); i++) { @@ -6613,6 +7605,11 @@ public: args.taskScheduler = taskScheduler; args.chartGroup = m_chartGroups[i]; args.func = func; + args.boundaryGrid = &boundaryGrid; + args.chartBuffers = &chartBuffers; +#if XA_RECOMPUTE_CHARTS + args.piecewiseParam = &piecewiseParam; +#endif args.progress = &progress; taskArgs.push_back(args); } @@ -6646,55 +7643,6 @@ private: namespace pack { -#if XA_DEBUG_EXPORT_ATLAS_IMAGES -const uint8_t TGA_TYPE_RGB = 2; -const uint8_t TGA_ORIGIN_UPPER = 0x20; - -#pragma pack(push, 1) -struct TgaHeader -{ - uint8_t id_length; - uint8_t colormap_type; - uint8_t image_type; - uint16_t colormap_index; - uint16_t colormap_length; - uint8_t colormap_size; - uint16_t x_origin; - uint16_t y_origin; - uint16_t width; - uint16_t height; - uint8_t pixel_size; - uint8_t flags; - enum { Size = 18 }; -}; -#pragma pack(pop) - -static void WriteTga(const char *filename, const uint8_t *data, uint32_t width, uint32_t height) -{ - XA_DEBUG_ASSERT(sizeof(TgaHeader) == TgaHeader::Size); - FILE *f; - XA_FOPEN(f, filename, "wb"); - if (!f) - return; - TgaHeader tga; - tga.id_length = 0; - tga.colormap_type = 0; - tga.image_type = TGA_TYPE_RGB; - tga.colormap_index = 0; - tga.colormap_length = 0; - tga.colormap_size = 0; - tga.x_origin = 0; - tga.y_origin = 0; - tga.width = (uint16_t)width; - tga.height = (uint16_t)height; - tga.pixel_size = 24; - tga.flags = TGA_ORIGIN_UPPER; - fwrite(&tga, sizeof(TgaHeader), 1, f); - fwrite(data, sizeof(uint8_t), width * height * 3, f); - fclose(f); -} -#endif - class AtlasImage { public: @@ -6728,13 +7676,13 @@ public: const int xx = x + offset_x; if (xx >= 0 && xx < atlas_w && yy < atlas_h) { const uint32_t dataOffset = xx + yy * m_width; - if (image->bitAt(x, y)) { + if (image->get(x, y)) { XA_DEBUG_ASSERT(m_data[dataOffset] == 0); m_data[dataOffset] = chartIndex | kImageHasChartIndexBit; - } else if (imageBilinear && imageBilinear->bitAt(x, y)) { + } else if (imageBilinear && imageBilinear->get(x, y)) { XA_DEBUG_ASSERT(m_data[dataOffset] == 0); m_data[dataOffset] = chartIndex | kImageHasChartIndexBit | kImageIsBilinearBit; - } else if (imagePadding && imagePadding->bitAt(x, y)) { + } else if (imagePadding && imagePadding->get(x, y)) { XA_DEBUG_ASSERT(m_data[dataOffset] == 0); m_data[dataOffset] = chartIndex | kImageHasChartIndexBit | kImageIsPaddingBit; } @@ -6807,6 +7755,8 @@ struct Chart bool allowRotate; // bounding box Vector2 majorAxis, minorAxis, minCorner, maxCorner; + // Mesh only + const Array *boundaryEdges; // UvMeshChart only Array faces; @@ -6816,6 +7766,7 @@ struct Chart struct AddChartTaskArgs { + ThreadLocal *boundingBox; param::Chart *paramChart; Chart *chart; // out }; @@ -6834,102 +7785,32 @@ static void runAddChartTask(void *userData) chart->material = 0; chart->indexCount = mesh->indexCount(); chart->indices = mesh->indices(); - chart->parametricArea = paramChart->computeParametricArea(); + chart->parametricArea = mesh->computeParametricArea(); if (chart->parametricArea < kAreaEpsilon) { // When the parametric area is too small we use a rough approximation to prevent divisions by very small numbers. const Vector2 bounds = paramChart->computeParametricBounds(); chart->parametricArea = bounds.x * bounds.y; } - chart->surfaceArea = paramChart->computeSurfaceArea(); + chart->surfaceArea = mesh->computeSurfaceArea(); chart->vertices = mesh->texcoords(); chart->vertexCount = mesh->vertexCount(); chart->allowRotate = true; - // Compute list of boundary vertices. - Array boundary; - boundary.reserve(16); + chart->boundaryEdges = &mesh->boundaryEdges(); + // Compute bounding box of chart. + BoundingBox2D &bb = args->boundingBox->get(); + bb.clear(); for (uint32_t v = 0; v < chart->vertexCount; v++) { if (mesh->isBoundaryVertex(v)) - boundary.push_back(mesh->texcoord(v)); + bb.appendBoundaryVertex(mesh->texcoord(v)); } - XA_DEBUG_ASSERT(boundary.size() > 0); - // Compute bounding box of chart. - static thread_local BoundingBox2D boundingBox; - boundingBox.compute(boundary.data(), boundary.size(), mesh->texcoords(), mesh->vertexCount()); - chart->majorAxis = boundingBox.majorAxis(); - chart->minorAxis = boundingBox.minorAxis(); - chart->minCorner = boundingBox.minCorner(); - chart->maxCorner = boundingBox.maxCorner(); + bb.compute(mesh->texcoords(), mesh->vertexCount()); + chart->majorAxis = bb.majorAxis; + chart->minorAxis = bb.minorAxis; + chart->minCorner = bb.minCorner; + chart->maxCorner = bb.maxCorner; XA_PROFILE_END(packChartsAddChartsThread) } -struct FindChartLocationBruteForceTaskArgs -{ - std::atomic *finished; // One of the tasks found a location that doesn't expand the atlas. - Vector2i startPosition; - const BitImage *atlasBitImage; - const BitImage *chartBitImage; - const BitImage *chartBitImageRotated; - int w, h; - bool blockAligned, allowRotate; - uint32_t maxResolution; - // out - bool best_insideAtlas; - int best_metric, best_x, best_y, best_w, best_h, best_r; -}; - -static void runFindChartLocationBruteForceTask(void *userData) -{ - XA_PROFILE_START(packChartsFindLocationThread) - auto args = (FindChartLocationBruteForceTaskArgs *)userData; - args->best_metric = INT_MAX; - if (args->finished->load()) - return; - // Try two different orientations. - for (int r = 0; r < 2; r++) { - if (args->finished->load()) - break; - int cw = args->chartBitImage->width(); - int ch = args->chartBitImage->height(); - if (r == 1) { - if (args->allowRotate) - swap(cw, ch); - else - break; - } - const int y = args->startPosition.y; - const int stepSize = args->blockAligned ? 4 : 1; - for (int x = args->startPosition.x; x <= args->w + stepSize; x += stepSize) { - if (args->maxResolution > 0 && (x > (int)args->maxResolution - cw || y > (int)args->maxResolution - ch)) - continue; - if (args->finished->load()) - break; - // Early out if metric not better. - const int area = max(args->w, x + cw) * max(args->h, y + ch); - const int extents = max(max(args->w, x + cw), max(args->h, y + ch)); - const int metric = extents * extents + area; - if (metric > args->best_metric) - continue; - // If metric is the same, pick the one closest to the origin. - if (metric == args->best_metric && max(x, y) >= max(args->best_x, args->best_y)) - continue; - if (!args->atlasBitImage->canBlit(r == 1 ? *(args->chartBitImageRotated) : *(args->chartBitImage), x, y)) - continue; - args->best_metric = metric; - args->best_insideAtlas = area == args->w * args->h; - args->best_x = x; - args->best_y = y; - args->best_w = cw; - args->best_h = ch; - args->best_r = r; - if (args->best_insideAtlas) { - args->finished->store(true); - break; - } - } - } - XA_PROFILE_END(packChartsFindLocationThread) -} - struct Atlas { ~Atlas() @@ -6975,6 +7856,7 @@ struct Atlas taskArgs.resize(chartCount); TaskGroupHandle taskGroup = taskScheduler->createTaskGroup(chartCount); uint32_t chartIndex = 0; + ThreadLocal boundingBox; for (uint32_t i = 0; i < chartGroupsCount; i++) { const param::ChartGroup *chartGroup = paramAtlas->chartGroupAt(i); if (chartGroup->isVertexMap()) @@ -6982,6 +7864,7 @@ struct Atlas const uint32_t count = chartGroup->chartCount(); for (uint32_t j = 0; j < count; j++) { AddChartTaskArgs &args = taskArgs[chartIndex]; + args.boundingBox = &boundingBox; args.paramChart = chartGroup->chartAt(j); Task task; task.userData = &taskArgs[chartIndex]; @@ -7000,8 +7883,6 @@ struct Atlas void addUvMeshCharts(UvMeshInstance *mesh) { BitArray vertexUsed(mesh->texcoords.size()); - Array boundary; - boundary.reserve(16); BoundingBox2D boundingBox; for (uint32_t c = 0; c < mesh->mesh->charts.size(); c++) { UvMeshChart *uvChart = mesh->mesh->charts[c]; @@ -7013,14 +7894,15 @@ struct Atlas chart->vertices = mesh->texcoords.data(); chart->vertexCount = mesh->texcoords.size(); chart->allowRotate = mesh->rotateCharts; + chart->boundaryEdges = nullptr; chart->faces.resize(uvChart->faces.size()); memcpy(chart->faces.data(), uvChart->faces.data(), sizeof(uint32_t) * uvChart->faces.size()); // Find unique vertices. - vertexUsed.clearAll(); + vertexUsed.zeroOutMemory(); for (uint32_t i = 0; i < chart->indexCount; i++) { const uint32_t vertex = chart->indices[i]; - if (!vertexUsed.bitAt(vertex)) { - vertexUsed.setBitAt(vertex); + if (!vertexUsed.get(vertex)) { + vertexUsed.set(vertex); chart->uniqueVertices.push_back(vertex); } } @@ -7045,24 +7927,22 @@ struct Atlas const Vector2 bounds = (maxCorner - minCorner) * 0.5f; chart->parametricArea = bounds.x * bounds.y; } - // Compute list of boundary vertices. - // Using all unique vertices for simplicity, can compute real boundaries if this is too slow. - boundary.clear(); - for (uint32_t v = 0; v < chart->uniqueVertexCount(); v++) - boundary.push_back(chart->uniqueVertexAt(v)); - XA_DEBUG_ASSERT(boundary.size() > 0); // Compute bounding box of chart. - boundingBox.compute(boundary.data(), boundary.size(), boundary.data(), boundary.size()); - chart->majorAxis = boundingBox.majorAxis(); - chart->minorAxis = boundingBox.minorAxis(); - chart->minCorner = boundingBox.minCorner(); - chart->maxCorner = boundingBox.maxCorner(); + // Using all unique vertices for simplicity, can compute real boundaries if this is too slow. + boundingBox.clear(); + for (uint32_t v = 0; v < chart->uniqueVertexCount(); v++) + boundingBox.appendBoundaryVertex(chart->uniqueVertexAt(v)); + boundingBox.compute(); + chart->majorAxis = boundingBox.majorAxis; + chart->minorAxis = boundingBox.minorAxis; + chart->minCorner = boundingBox.minCorner; + chart->maxCorner = boundingBox.maxCorner; m_charts.push_back(chart); } } // Pack charts in the smallest possible rectangle. - bool packCharts(TaskScheduler *taskScheduler, const PackOptions &options, ProgressFunc progressFunc, void *progressUserData) + bool packCharts(const PackOptions &options, ProgressFunc progressFunc, void *progressUserData) { if (progressFunc) { if (!progressFunc(ProgressCategory::PackCharts, 0, progressUserData)) @@ -7107,10 +7987,11 @@ struct Atlas for (uint32_t c = 0; c < chartCount; c++) { Chart *chart = m_charts[c]; // Compute chart scale - float scale = (chart->surfaceArea / chart->parametricArea) * m_texelsPerUnit; - if (chart->parametricArea == 0.0f) - scale = 0; - XA_ASSERT(isFinite(scale)); + float scale = 1.0f; + if (chart->parametricArea != 0.0f) { + scale = (chart->surfaceArea / chart->parametricArea) * m_texelsPerUnit; + XA_ASSERT(isFinite(scale)); + } // Translate, rotate and scale vertices. Compute extents. Vector2 minCorner(FLT_MAX, FLT_MAX); if (!chart->allowRotate) { @@ -7181,6 +8062,8 @@ struct Atlas texcoord.y += 0.5f + options.padding; extents = max(extents, texcoord); } + if (extents.x > resolution || extents.y > resolution) + XA_PRINT(" Chart %u extents are large (%gx%g)\n", c, extents.x, extents.y); chartExtents[c] = extents; chartOrderArray[c] = extents.x + extents.y; // Use perimeter for chart sort key. minChartPerimeter = min(minChartPerimeter, chartOrderArray[c]); @@ -7207,6 +8090,7 @@ struct Atlas // Rotated versions swap x and y. BitImage chartImage, chartImageBilinear, chartImagePadding; BitImage chartImageRotated, chartImageBilinearRotated, chartImagePaddingRotated; + UniformGrid2 boundaryEdgeGrid; Array atlasSizes; atlasSizes.push_back(Vector2i(0, 0)); int progress = 0; @@ -7249,7 +8133,7 @@ struct Atlas } // Expand chart by pixels sampled by bilinear interpolation. if (options.bilinear) - bilinearExpand(chart, &chartImage, &chartImageBilinear, chart->allowRotate ? &chartImageBilinearRotated : nullptr); + bilinearExpand(chart, &chartImage, &chartImageBilinear, chart->allowRotate ? &chartImageBilinearRotated : nullptr, boundaryEdgeGrid); // Expand chart by padding pixels (dilation). if (options.padding > 0) { // Copy into the same BitImage instances for every chart to avoid reallocating BitImage buffers (largest chart is packed first). @@ -7310,7 +8194,7 @@ struct Atlas chartStartPositions.push_back(Vector2i(0, 0)); } XA_PROFILE_START(packChartsFindLocation) - const bool foundLocation = findChartLocation(taskScheduler, chartStartPositions[currentAtlas], options.bruteForce, m_bitImages[currentAtlas], chartImageToPack, chartImageToPackRotated, atlasSizes[currentAtlas].x, atlasSizes[currentAtlas].y, &best_x, &best_y, &best_cw, &best_ch, &best_r, options.blockAlign, maxResolution, chart->allowRotate); + const bool foundLocation = findChartLocation(chartStartPositions[currentAtlas], options.bruteForce, m_bitImages[currentAtlas], chartImageToPack, chartImageToPackRotated, atlasSizes[currentAtlas].x, atlasSizes[currentAtlas].y, &best_x, &best_y, &best_cw, &best_ch, &best_r, options.blockAlign, maxResolution, chart->allowRotate); XA_PROFILE_END(packChartsFindLocation) XA_DEBUG_ASSERT(!(firstChartInBitImage && !foundLocation)); // Chart doesn't fit in an empty, newly allocated bitImage. Shouldn't happen, since charts are resized if they are too big to fit in the atlas. if (maxResolution == 0) { @@ -7359,6 +8243,13 @@ struct Atlas } else { m_atlasImages[currentAtlas]->addChart(c, &chartImageRotated, options.bilinear ? &chartImageBilinearRotated : nullptr, options.padding > 0 ? &chartImagePaddingRotated : nullptr, atlasSizes[currentAtlas].x, atlasSizes[currentAtlas].y, best_x, best_y); } +#if XA_DEBUG_EXPORT_ATLAS_IMAGES && XA_DEBUG_EXPORT_ATLAS_IMAGES_PER_CHART + for (uint32_t j = 0; j < m_atlasImages.size(); j++) { + char filename[256]; + XA_SPRINTF(filename, sizeof(filename), "debug_atlas_image%02u_chart%04u.tga", j, i); + m_atlasImages[j]->writeTga(filename, (uint32_t)atlasSizes[j].x, (uint32_t)atlasSizes[j].y); + } +#endif } chart->atlasIndex = (int32_t)currentAtlas; // Modify texture coordinates: @@ -7415,7 +8306,7 @@ struct Atlas uint32_t count = 0; for (uint32_t y = 0; y < m_height; y++) { for (uint32_t x = 0; x < m_width; x++) - count += m_bitImages[i]->bitAt(x, y); + count += m_bitImages[i]->get(x, y); } m_utilization[i] = float(count) / (m_width * m_height); } @@ -7445,70 +8336,56 @@ private: // is occupied at this point. At the end we have many small charts and a large atlas with sparse holes. Finding those holes randomly is slow. A better approach would be to // start stacking large charts as if they were tetris pieces. Once charts get small try to place them randomly. It may be interesting to try a intermediate strategy, first try // along one axis and then try exhaustively along that axis. - bool findChartLocation(TaskScheduler *taskScheduler, const Vector2i &startPosition, bool bruteForce, const BitImage *atlasBitImage, const BitImage *chartBitImage, const BitImage *chartBitImageRotated, int w, int h, int *best_x, int *best_y, int *best_w, int *best_h, int *best_r, bool blockAligned, uint32_t maxResolution, bool allowRotate) + bool findChartLocation(const Vector2i &startPosition, bool bruteForce, const BitImage *atlasBitImage, const BitImage *chartBitImage, const BitImage *chartBitImageRotated, int w, int h, int *best_x, int *best_y, int *best_w, int *best_h, int *best_r, bool blockAligned, uint32_t maxResolution, bool allowRotate) { const int attempts = 4096; if (bruteForce || attempts >= w * h) - return findChartLocation_bruteForce(taskScheduler, startPosition, atlasBitImage, chartBitImage, chartBitImageRotated, w, h, best_x, best_y, best_w, best_h, best_r, blockAligned, maxResolution, allowRotate); + return findChartLocation_bruteForce(startPosition, atlasBitImage, chartBitImage, chartBitImageRotated, w, h, best_x, best_y, best_w, best_h, best_r, blockAligned, maxResolution, allowRotate); return findChartLocation_random(atlasBitImage, chartBitImage, chartBitImageRotated, w, h, best_x, best_y, best_w, best_h, best_r, attempts, blockAligned, maxResolution, allowRotate); } - bool findChartLocation_bruteForce(TaskScheduler *taskScheduler, const Vector2i &startPosition, const BitImage *atlasBitImage, const BitImage *chartBitImage, const BitImage *chartBitImageRotated, int w, int h, int *best_x, int *best_y, int *best_w, int *best_h, int *best_r, bool blockAligned, uint32_t maxResolution, bool allowRotate) + bool findChartLocation_bruteForce(const Vector2i &startPosition, const BitImage *atlasBitImage, const BitImage *chartBitImage, const BitImage *chartBitImageRotated, int w, int h, int *best_x, int *best_y, int *best_w, int *best_h, int *best_r, bool blockAligned, uint32_t maxResolution, bool allowRotate) { const int stepSize = blockAligned ? 4 : 1; - const int chartMinHeight = min(chartBitImage->height(), chartBitImageRotated->height()); - uint32_t taskCount = 0; - for (int y = startPosition.y; y <= h + stepSize; y += stepSize) { - if (maxResolution > 0 && y > (int)maxResolution - chartMinHeight) - break; - taskCount++; - } - m_bruteForceTaskArgs.clear(); - m_bruteForceTaskArgs.resize(taskCount); - TaskGroupHandle taskGroup = taskScheduler->createTaskGroup(taskCount); - std::atomic finished(false); // One of the tasks found a location that doesn't expand the atlas. - uint32_t i = 0; - for (int y = startPosition.y; y <= h + stepSize; y += stepSize) { - if (maxResolution > 0 && y > (int)maxResolution - chartMinHeight) - break; - FindChartLocationBruteForceTaskArgs &args = m_bruteForceTaskArgs[i]; - args.finished = &finished; - args.startPosition = Vector2i(y == startPosition.y ? startPosition.x : 0, y); - args.atlasBitImage = atlasBitImage; - args.chartBitImage = chartBitImage; - args.chartBitImageRotated = chartBitImageRotated; - args.w = w; - args.h = h; - args.blockAligned = blockAligned; - args.allowRotate = allowRotate; - args.maxResolution = maxResolution; - Task task; - task.userData = &m_bruteForceTaskArgs[i]; - task.func = runFindChartLocationBruteForceTask; - taskScheduler->run(taskGroup, task); - i++; - } - taskScheduler->wait(&taskGroup); - // Find the task result with the best metric. int best_metric = INT_MAX; - bool best_insideAtlas = false; - for (i = 0; i < taskCount; i++) { - FindChartLocationBruteForceTaskArgs &args = m_bruteForceTaskArgs[i]; - if (args.best_metric > best_metric) - continue; - // A location that doesn't expand the atlas is always preferred. - if (!args.best_insideAtlas && best_insideAtlas) - continue; - // If metric is the same, pick the one closest to the origin. - if (args.best_insideAtlas == best_insideAtlas && args.best_metric == best_metric && max(args.best_x, args.best_y) >= max(*best_x, *best_y)) - continue; - best_metric = args.best_metric; - best_insideAtlas = args.best_insideAtlas; - *best_x = args.best_x; - *best_y = args.best_y; - *best_w = args.best_w; - *best_h = args.best_h; - *best_r = args.best_r; + // Try two different orientations. + for (int r = 0; r < 2; r++) { + int cw = chartBitImage->width(); + int ch = chartBitImage->height(); + if (r == 1) { + if (allowRotate) + swap(cw, ch); + else + break; + } + for (int y = startPosition.y; y <= h + stepSize; y += stepSize) { + if (maxResolution > 0 && y > (int)maxResolution - ch) + break; + for (int x = (y == startPosition.y ? startPosition.x : 0); x <= w + stepSize; x += stepSize) { + if (maxResolution > 0 && x > (int)maxResolution - cw) + break; + // Early out if metric is not better. + const int extentX = max(w, x + cw), extentY = max(h, y + ch); + const int area = extentX * extentY; + const int extents = max(extentX, extentY); + const int metric = extents * extents + area; + if (metric > best_metric) + continue; + // If metric is the same, pick the one closest to the origin. + if (metric == best_metric && max(x, y) >= max(*best_x, *best_y)) + continue; + if (!atlasBitImage->canBlit(r == 1 ? *chartBitImageRotated : *chartBitImage, x, y)) + continue; + best_metric = metric; + *best_x = x; + *best_y = y; + *best_w = cw; + *best_h = ch; + *best_r = r; + if (area == w * h) + return true; // Chart is completely inside, do not look at any other location. + } + } } return best_metric != INT_MAX; } @@ -7581,10 +8458,10 @@ private: for (int x = 0; x < w; x++) { int xx = x + offset_x; if (xx >= 0) { - if (image->bitAt(x, y)) { + if (image->get(x, y)) { if (xx < atlas_w && yy < atlas_h) { - XA_DEBUG_ASSERT(atlasBitImage->bitAt(xx, yy) == false); - atlasBitImage->setBitAt(xx, yy); + XA_DEBUG_ASSERT(atlasBitImage->get(xx, yy) == false); + atlasBitImage->set(xx, yy); } } } @@ -7593,14 +8470,23 @@ private: } } - void bilinearExpand(const Chart *chart, BitImage *source, BitImage *dest, BitImage *destRotated) const + void bilinearExpand(const Chart *chart, BitImage *source, BitImage *dest, BitImage *destRotated, UniformGrid2 &boundaryEdgeGrid) const { + boundaryEdgeGrid.reset(chart->vertices, chart->indices); + if (chart->boundaryEdges) { + const uint32_t edgeCount = chart->boundaryEdges->size(); + for (uint32_t i = 0; i < edgeCount; i++) + boundaryEdgeGrid.append((*chart->boundaryEdges)[i]); + } else { + for (uint32_t i = 0; i < chart->indexCount; i++) + boundaryEdgeGrid.append(i); + } const int xOffsets[] = { -1, 0, 1, -1, 1, -1, 0, 1 }; const int yOffsets[] = { -1, -1, -1, 0, 0, 1, 1, 1 }; for (uint32_t y = 0; y < source->height(); y++) { for (uint32_t x = 0; x < source->width(); x++) { // Copy pixels from source. - if (source->bitAt(x, y)) + if (source->get(x, y)) goto setPixel; // Empty pixel. If none of of the surrounding pixels are set, this pixel can't be sampled by bilinear interpolation. { @@ -7610,44 +8496,32 @@ private: const int sy = (int)y + yOffsets[s]; if (sx < 0 || sy < 0 || sx >= (int)source->width() || sy >= (int)source->height()) continue; - if (source->bitAt((uint32_t)sx, (uint32_t)sy)) + if (source->get((uint32_t)sx, (uint32_t)sy)) break; } if (s == 8) continue; } - // If a 2x2 square centered on the pixels centroid intersects the triangle, this pixel will be sampled by bilinear interpolation. - // See "Precomputed Global Illumination in Frostbite (GDC 2018)" page 95 - for (uint32_t f = 0; f < chart->indexCount / 3; f++) { + { + // If a 2x2 square centered on the pixels centroid intersects the triangle, this pixel will be sampled by bilinear interpolation. + // See "Precomputed Global Illumination in Frostbite (GDC 2018)" page 95 const Vector2 centroid((float)x + 0.5f, (float)y + 0.5f); - Vector2 vertices[3]; - for (uint32_t i = 0; i < 3; i++) - vertices[i] = chart->vertices[chart->indices[f * 3 + i]]; - // Test for triangle vertex in square bounds. - for (uint32_t i = 0; i < 3; i++) { - const Vector2 &v = vertices[i]; - if (v.x > centroid.x - 1.0f && v.x < centroid.x + 1.0f && v.y > centroid.y - 1.0f && v.y < centroid.y + 1.0f) - goto setPixel; - } - // Test for triangle edge intersection with square edge. const Vector2 squareVertices[4] = { Vector2(centroid.x - 1.0f, centroid.y - 1.0f), Vector2(centroid.x + 1.0f, centroid.y - 1.0f), Vector2(centroid.x + 1.0f, centroid.y + 1.0f), Vector2(centroid.x - 1.0f, centroid.y + 1.0f) }; - for (uint32_t i = 0; i < 3; i++) { - for (uint32_t j = 0; j < 4; j++) { - if (linesIntersect(vertices[i], vertices[(i + 1) % 3], squareVertices[j], squareVertices[(j + 1) % 4], 0.0f)) - goto setPixel; - } + for (uint32_t j = 0; j < 4; j++) { + if (boundaryEdgeGrid.intersect(squareVertices[j], squareVertices[(j + 1) % 4], 0.0f)) + goto setPixel; } } continue; setPixel: - dest->setBitAt(x, y); + dest->set(x, y); if (destRotated) - destRotated->setBitAt(y, x); + destRotated->set(y, x); } } } @@ -7660,9 +8534,9 @@ private: static bool drawTriangleCallback(void *param, int x, int y) { auto args = (DrawTriangleCallbackArgs *)param; - args->chartBitImage->setBitAt(x, y); + args->chartBitImage->set(x, y); if (args->chartBitImageRotated) - args->chartBitImageRotated->setBitAt(y, x); + args->chartBitImageRotated->set(y, x); return true; } @@ -7670,7 +8544,6 @@ private: Array m_utilization; Array m_bitImages; Array m_charts; - Array m_bruteForceTaskArgs; RadixSort m_radix; uint32_t m_width = 0; uint32_t m_height = 0; @@ -7789,13 +8662,6 @@ static void runAddMeshTask(void *userData) } if (progress->cancel) goto cleanup; - { - XA_PROFILE_START(addMeshCreateBoundaries) - mesh->createBoundaries(); - XA_PROFILE_END(addMeshCreateBoundaries) - } - if (progress->cancel) - goto cleanup; #if XA_DEBUG_EXPORT_OBJ_SOURCE_MESHES char filename[256]; XA_SPRINTF(filename, sizeof(filename), "debug_mesh_%03u.obj", mesh->id()); @@ -7805,22 +8671,22 @@ static void runAddMeshTask(void *userData) mesh->writeObjVertices(file); // groups uint32_t numGroups = 0; - for (uint32_t i = 0; i < mesh->faceGroupCount(); i++) { - if (mesh->faceGroupAt(i) != UINT32_MAX) + for (uint32_t i = 0; i < mesh->faceCount(); i++) { + if (mesh->faceGroupAt(i) != Mesh::kInvalidFaceGroup) numGroups = internal::max(numGroups, mesh->faceGroupAt(i) + 1); } for (uint32_t i = 0; i < numGroups; i++) { fprintf(file, "o group_%04d\n", i); fprintf(file, "s off\n"); - for (uint32_t f = 0; f < mesh->faceGroupCount(); f++) { + for (uint32_t f = 0; f < mesh->faceCount(); f++) { if (mesh->faceGroupAt(f) == i) mesh->writeObjFace(file, f); } } fprintf(file, "o group_ignored\n"); fprintf(file, "s off\n"); - for (uint32_t f = 0; f < mesh->faceGroupCount(); f++) { - if (mesh->faceGroupAt(f) == UINT32_MAX) + for (uint32_t f = 0; f < mesh->faceCount(); f++) { + if (mesh->faceGroupAt(f) == Mesh::kInvalidFaceGroup) mesh->writeObjFace(file, f); } mesh->writeObjBoundaryEges(file); @@ -8033,7 +8899,6 @@ void AddMeshJoin(Atlas *atlas) XA_PROFILE_PRINT_AND_RESET(" Total (thread): ", addMeshThread) XA_PROFILE_PRINT_AND_RESET(" Create colocals: ", addMeshCreateColocals) XA_PROFILE_PRINT_AND_RESET(" Create face groups: ", addMeshCreateFaceGroups) - XA_PROFILE_PRINT_AND_RESET(" Create boundaries: ", addMeshCreateBoundaries) XA_PROFILE_PRINT_AND_RESET(" Create chart groups (real): ", addMeshCreateChartGroupsReal) XA_PROFILE_PRINT_AND_RESET(" Create chart groups (thread): ", addMeshCreateChartGroupsThread) XA_PRINT_MEM_USAGE @@ -8044,16 +8909,7 @@ struct EdgeKey EdgeKey() {} EdgeKey(const EdgeKey &k) : v0(k.v0), v1(k.v1) {} EdgeKey(uint32_t v0, uint32_t v1) : v0(v0), v1(v1) {} - - void operator=(const EdgeKey &k) - { - v0 = k.v0; - v1 = k.v1; - } - bool operator==(const EdgeKey &k) const - { - return v0 == k.v0 && v1 == k.v1; - } + bool operator==(const EdgeKey &k) const { return v0 == k.v0 && v1 == k.v1; } uint32_t v0; uint32_t v1; @@ -8119,15 +8975,15 @@ AddMeshError::Enum AddUvMesh(Atlas *atlas, const UvMeshDecl &decl) for (uint32_t i = 0; i < indexCount; i++) vertexToFaceMap.add(meshInstance->texcoords[mesh->indices[i]]); internal::BitArray faceAssigned(faceCount); - faceAssigned.clearAll(); + faceAssigned.zeroOutMemory(); for (uint32_t f = 0; f < faceCount; f++) { - if (faceAssigned.bitAt(f)) + if (faceAssigned.get(f)) continue; // Found an unassigned face, create a new chart. internal::UvMeshChart *chart = XA_NEW(internal::MemTag::Default, internal::UvMeshChart); chart->material = decl.faceMaterialData ? decl.faceMaterialData[f] : 0; // Walk incident faces and assign them to the chart. - faceAssigned.setBitAt(f); + faceAssigned.set(f); chart->faces.push_back(f); for (;;) { bool newFaceAssigned = false; @@ -8140,8 +8996,8 @@ AddMeshError::Enum AddUvMesh(Atlas *atlas, const UvMeshDecl &decl) while (mapIndex != UINT32_MAX) { const uint32_t face2 = mapIndex / 3; // 3 vertices added per face. // Materials must match. - if (!faceAssigned.bitAt(face2) && (!decl.faceMaterialData || decl.faceMaterialData[face] == decl.faceMaterialData[face2])) { - faceAssigned.setBitAt(face2); + if (!faceAssigned.get(face2) && (!decl.faceMaterialData || decl.faceMaterialData[face] == decl.faceMaterialData[face2])) { + faceAssigned.set(face2); chart->faces.push_back(face2); newFaceAssigned = true; } @@ -8202,6 +9058,7 @@ void ComputeCharts(Atlas *atlas, ChartOptions chartOptions) continue; for (uint32_t k = 0; k < chartGroup->chartCount(); k++) { const internal::param::Chart *chart = chartGroup->chartAt(k); +#if XA_PRINT_CHART_WARNINGS if (chart->warningFlags() & internal::param::ChartWarningFlags::CloseHolesFailed) XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u): failed to close holes\n", chartCount, i, j, k); if (chart->warningFlags() & internal::param::ChartWarningFlags::FixTJunctionsDuplicatedEdge) @@ -8210,8 +9067,7 @@ void ComputeCharts(Atlas *atlas, ChartOptions chartOptions) XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u): fixing t-junctions failed\n", chartCount, i, j, k); if (chart->warningFlags() & internal::param::ChartWarningFlags::TriangulateDuplicatedEdge) XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u): triangulation created non-manifold geometry\n", chartCount, i, j, k); - if (!chart->isDisk()) - XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u): doesn't have disk topology\n", chartCount, i, j, k); +#endif holesCount += chart->closedHolesCount(); if (chart->closedHolesCount() > 0) chartsWithHolesCount++; @@ -8279,7 +9135,7 @@ void ParameterizeCharts(Atlas *atlas, ParameterizeFunc func) return; } XA_PROFILE_END(parameterizeChartsReal) - uint32_t chartCount = 0, orthoChartsCount = 0, planarChartsCount = 0, chartsAddedCount = 0, chartsDeletedCount = 0; + uint32_t chartCount = 0, orthoChartsCount = 0, planarChartsCount = 0, lscmChartsCount = 0, piecewiseChartsCount = 0, chartsAddedCount = 0, chartsDeletedCount = 0; for (uint32_t i = 0; i < ctx->meshCount; i++) { for (uint32_t j = 0; j < ctx->paramAtlas.chartGroupCount(i); j++) { const internal::param::ChartGroup *chartGroup = ctx->paramAtlas.chartGroupAt(i, j); @@ -8287,19 +9143,23 @@ void ParameterizeCharts(Atlas *atlas, ParameterizeFunc func) continue; for (uint32_t k = 0; k < chartGroup->chartCount(); k++) { const internal::param::Chart *chart = chartGroup->chartAt(k); - if (chart->isPlanar()) + if (chart->type() == ChartType::Planar) planarChartsCount++; - else if (chart->isOrtho()) + else if (chart->type() == ChartType::Ortho) orthoChartsCount++; + else if (chart->type() == ChartType::LSCM) + lscmChartsCount++; + else if (chart->type() == ChartType::Piecewise) + piecewiseChartsCount++; } chartCount += chartGroup->chartCount(); chartsAddedCount += chartGroup->paramAddedChartsCount(); chartsDeletedCount += chartGroup->paramDeletedChartsCount(); } } - XA_PRINT(" %u planar charts, %u ortho charts, %u other\n", planarChartsCount, orthoChartsCount, chartCount - (planarChartsCount + orthoChartsCount)); + XA_PRINT(" %u planar charts, %u ortho charts, %u LSCM charts, %u piecewise charts\n", planarChartsCount, orthoChartsCount, lscmChartsCount, piecewiseChartsCount); if (chartsDeletedCount > 0) { - XA_PRINT(" %u charts deleted due to invalid parameterizations, %u new charts added\n", chartsDeletedCount, chartsAddedCount); + XA_PRINT(" %u charts with invalid parameterizations replaced with %u new charts\n", chartsDeletedCount, chartsAddedCount); XA_PRINT(" %u charts\n", chartCount); } uint32_t chartIndex = 0, invalidParamCount = 0; @@ -8310,7 +9170,7 @@ void ParameterizeCharts(Atlas *atlas, ParameterizeFunc func) continue; for (uint32_t k = 0; k < chartGroup->chartCount(); k++) { const internal::param::Chart *chart = chartGroup->chartAt(k); - const internal::param::ParameterizationQuality &quality = chart->paramQuality(); + const internal::param::Quality &quality = chart->quality(); #if XA_DEBUG_EXPORT_OBJ_CHARTS_AFTER_PARAMETERIZATION { char filename[256]; @@ -8319,13 +9179,20 @@ void ParameterizeCharts(Atlas *atlas, ParameterizeFunc func) } #endif bool invalid = false; + const char *type = "LSCM"; + if (chart->type() == ChartType::Planar) + type = "planar"; + else if (chart->type() == ChartType::Ortho) + type = "ortho"; + else if (chart->type() == ChartType::Piecewise) + type = "piecewise"; if (quality.boundaryIntersection) { invalid = true; - XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u) (%s): invalid parameterization, self-intersecting boundary.\n", chartIndex, i, j, k, chart->isPlanar() ? "planar" : chart->isOrtho() ? "ortho" : "other"); + XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u) (%s): invalid parameterization, self-intersecting boundary.\n", chartIndex, i, j, k, type); } if (quality.flippedTriangleCount > 0) { invalid = true; - XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u) (%s): invalid parameterization, %u / %u flipped triangles.\n", chartIndex, i, j, k, chart->isPlanar() ? "planar" : chart->isOrtho() ? "ortho" : "other", quality.flippedTriangleCount, quality.totalTriangleCount); + XA_PRINT_WARNING(" Chart %u (mesh %u, group %u, id %u) (%s): invalid parameterization, %u / %u flipped triangles.\n", chartIndex, i, j, k, type, quality.flippedTriangleCount, quality.totalTriangleCount); } if (invalid) invalidParamCount++; @@ -8415,7 +9282,7 @@ void PackCharts(Atlas *atlas, PackOptions packOptions) packAtlas.addCharts(ctx->taskScheduler, &ctx->paramAtlas); XA_PROFILE_END(packChartsAddCharts) XA_PROFILE_START(packCharts) - if (!packAtlas.packCharts(ctx->taskScheduler, packOptions, ctx->progressFunc, ctx->progressUserData)) + if (!packAtlas.packCharts(packOptions, ctx->progressFunc, ctx->progressUserData)) return; XA_PROFILE_END(packCharts) // Populate atlas object with pack results. @@ -8440,8 +9307,7 @@ void PackCharts(Atlas *atlas, PackOptions packOptions) XA_PROFILE_PRINT_AND_RESET(" Restore texcoords: ", packChartsAddChartsRestoreTexcoords) XA_PROFILE_PRINT_AND_RESET(" Rasterize: ", packChartsRasterize) XA_PROFILE_PRINT_AND_RESET(" Dilate (padding): ", packChartsDilate) - XA_PROFILE_PRINT_AND_RESET(" Find location (real): ", packChartsFindLocation) - XA_PROFILE_PRINT_AND_RESET(" Find location (thread): ", packChartsFindLocationThread) + XA_PROFILE_PRINT_AND_RESET(" Find location: ", packChartsFindLocation) XA_PROFILE_PRINT_AND_RESET(" Blit: ", packChartsBlit) XA_PRINT_MEM_USAGE XA_PRINT("Building output meshes\n"); @@ -8527,9 +9393,7 @@ void PackCharts(Atlas *atlas, PackOptions packOptions) const int32_t atlasIndex = packAtlas.getChart(chartIndex)->atlasIndex; XA_DEBUG_ASSERT(atlasIndex >= 0); outputChart->atlasIndex = (uint32_t)atlasIndex; - outputChart->flags = 0; - if (chart->paramQuality().boundaryIntersection || chart->paramQuality().flippedTriangleCount > 0) - outputChart->flags |= ChartFlags::Invalid; + outputChart->type = chart->type(); outputChart->faceCount = mesh->faceCount(); outputChart->faceArray = XA_ALLOC_ARRAY(internal::MemTag::Default, uint32_t, outputChart->faceCount); for (uint32_t f = 0; f < outputChart->faceCount; f++) diff --git a/thirdparty/xatlas/xatlas.h b/thirdparty/xatlas/xatlas.h index 7be165e7e57..e59f493287d 100644 --- a/thirdparty/xatlas/xatlas.h +++ b/thirdparty/xatlas/xatlas.h @@ -35,11 +35,14 @@ Copyright NVIDIA Corporation 2006 -- Ignacio Castano namespace xatlas { -struct ChartFlags +struct ChartType { - enum + enum Enum { - Invalid = 1 << 0 + Planar, + Ortho, + LSCM, + Piecewise }; }; @@ -47,10 +50,10 @@ struct ChartFlags struct Chart { uint32_t atlasIndex; // Sub-atlas index. - uint32_t flags; uint32_t *faceArray; uint32_t faceCount; uint32_t material; + ChartType::Enum type; }; // Output vertex.