Merge pull request #51518 from Calinou/doc-network-android-permission

doc/classes/HTTPClient.xml

@@ -8,6 +8,7 @@
 		[b]Note:[/b] This client only needs to connect to a host once (see [method connect_to_host]) to send multiple requests. Because of this, methods that take URLs usually take just the part after the host instead of the full URL, as the client is already connected to a host. See [method request] for a full example and to get started.
 		A [HTTPClient] should be reused between multiple requests or to connect to different hosts instead of creating one client per request. Supports SSL and SSL server certificate verification. HTTP status codes in the 2xx range indicate success, 3xx redirection (i.e. "try again, but over here"), 4xx something was wrong with the request, and 5xx something went wrong on the server's side.
 		For more information on HTTP, see https://developer.mozilla.org/en-US/docs/Web/HTTP (or read RFC 2616 to get it straight from the source: https://tools.ietf.org/html/rfc2616).
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 		[b]Note:[/b] It's recommended to use transport encryption (SSL/TLS) and to avoid sending sensitive information (such as login credentials) in HTTP GET URL parameters. Consider using HTTP POST requests or HTTP headers for such information instead.
 		[b]Note:[/b] When performing HTTP requests from a project exported to HTML5, keep in mind the remote server may not allow requests from foreign origins due to [url=https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS]CORS[/url]. If you host the server in question, you should modify its backend to allow requests from foreign origins by adding the [code]Access-Control-Allow-Origin: *[/code] HTTP header.
 		[b]Note:[/b] SSL/TLS support is currently limited to TLS 1.0, TLS 1.1, and TLS 1.2. Attempting to connect to a TLS 1.3-only server will return an error.

doc/classes/HTTPRequest.xml

@@ -7,6 +7,7 @@
 		A node with the ability to send HTTP requests. Uses [HTTPClient] internally.
 		Can be used to make HTTP requests, i.e. download or upload files or web content via HTTP.
 		[b]Warning:[/b] See the notes and warnings on [HTTPClient] for limitations, especially regarding SSL security.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 		[b]Example of contacting a REST API and printing one of its returned fields:[/b]
 		[codeblocks]
 		[gdscript]
@@ -149,7 +150,6 @@
 		}
 		[/csharp]
 		[/codeblocks]
-
 		[b]Gzipped response bodies[/b]: HTTPRequest will automatically handle decompression of response bodies. A [code]Accept-Encoding[/code] header will be automatically added to each of your requests, unless one is already specified. Any response with a [code]Content-Encoding: gzip[/code] header will automatically be decompressed and delivered to you as uncompressed bytes.
 	</description>
 	<tutorials>

doc/classes/MultiplayerAPI.xml

@@ -8,6 +8,7 @@
 		By default, [SceneTree] has a reference to this class that is used to provide multiplayer capabilities (i.e. RPCs) across the whole scene.
 		It is possible to override the MultiplayerAPI instance used by specific Nodes by setting the [member Node.custom_multiplayer] property, effectively allowing to run both client and server in the same scene.
 		[b]Note:[/b] The high-level multiplayer API protocol is an implementation detail and isn't meant to be used by non-Godot servers. It may change without notice.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/MultiplayerPeer.xml

@@ -6,6 +6,7 @@
 	<description>
 		Manages the connection to multiplayer peers. Assigns unique IDs to each client connected to the server. See also [MultiplayerAPI].
 		[b]Note:[/b] The high-level multiplayer API protocol is an implementation detail and isn't meant to be used by non-Godot servers. It may change without notice.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 		<link title="High-level multiplayer">https://docs.godotengine.org/en/latest/tutorials/networking/high_level_multiplayer.html</link>

doc/classes/PacketPeer.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		PacketPeer is an abstraction and base class for packet-based protocols (such as UDP). It provides an API for sending and receiving packets both as raw data or variables. This makes it easy to transfer data over a protocol, without having to encode data as low-level bytes or having to worry about network ordering.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/PacketPeerDTLS.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		This class represents a DTLS peer connection. It can be used to connect to a DTLS server, and is returned by [method DTLSServer.take_connection].
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 		[b]Warning:[/b] SSL/TLS certificate revocation and certificate pinning are currently not supported. Revoked certificates are accepted as long as they are otherwise valid. If this is a concern, you may want to use automatically managed certificates with a short validity period.
 	</description>
 	<tutorials>

doc/classes/PacketPeerStream.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		PacketStreamPeer provides a wrapper for working using packets over a stream. This allows for using packet based code with StreamPeers. PacketPeerStream implements a custom protocol over the StreamPeer, so the user should not read or write to the wrapped StreamPeer directly.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/PacketPeerUDP.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		UDP packet peer. Can be used to send raw UDP packets as well as [Variant]s.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/StreamPeer.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		StreamPeer is an abstraction and base class for stream-based protocols (such as TCP). It provides an API for sending and receiving data through streams as raw data or strings.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/StreamPeerSSL.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		SSL stream peer. This object can be used to connect to an SSL server or accept a single SSL client connection.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 		<link title="SSL certificates">https://docs.godotengine.org/en/latest/tutorials/networking/ssl_certificates.html</link>

doc/classes/StreamPeerTCP.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		TCP stream peer. This object can be used to connect to TCP servers, or also is returned by a TCP server.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

doc/classes/TCPServer.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		A TCP server. Listens to connections on a port and returns a [StreamPeerTCP] when it gets an incoming connection.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

modules/enet/doc_classes/ENetPacketPeer.xml

@@ -6,6 +6,7 @@
 	<description>
 		A PacketPeer implementation representing a peer of an [ENetConnection].
 		This class cannot be instantiated directly but can be retrieved during [method ENetConnection.service] or via [method ENetConnection.get_peers].
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 		<link title="API documentation on the ENet website">http://enet.bespin.org/usergroup0.html</link>

modules/webrtc/doc_classes/WebRTCMultiplayerPeer.xml

@@ -7,6 +7,7 @@
 		This class constructs a full mesh of [WebRTCPeerConnection] (one connection for each peer) that can be used as a [member MultiplayerAPI.multiplayer_peer].
 		You can add each [WebRTCPeerConnection] via [method add_peer] or remove them via [method remove_peer]. Peers must be added in [constant WebRTCPeerConnection.STATE_NEW] state to allow it to create the appropriate channels. This class will not create offers nor set descriptions, it will only poll them, and notify connections and disconnections.
 		[signal MultiplayerPeer.connection_succeeded] and [signal MultiplayerPeer.server_disconnected] will not be emitted unless [code]server_compatibility[/code] is [code]true[/code] in [method initialize]. Beside that data transfer works like in a [MultiplayerPeer].
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

modules/websocket/doc_classes/WebSocketClient.xml

@@ -8,6 +8,7 @@
 		This client can be optionally used as a multiplayer peer for the [MultiplayerAPI].
 		After starting the client ([method connect_to_url]), you will need to [method MultiplayerPeer.poll] it at regular intervals (e.g. inside [method Node._process]).
 		You will receive appropriate signals when connecting, disconnecting, or when new data is available.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml

@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		Base class for WebSocket server and client, allowing them to be used as multiplayer peer for the [MultiplayerAPI].
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>

modules/websocket/doc_classes/WebSocketServer.xml

@@ -7,6 +7,7 @@
 		This class implements a WebSocket server that can also support the high-level multiplayer API.
 		After starting the server ([method listen]), you will need to [method MultiplayerPeer.poll] it at regular intervals (e.g. inside [method Node._process]). When clients connect, disconnect, or send data, you will receive the appropriate signal.
 		[b]Note:[/b] Not available in HTML5 exports.
+		[b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.
 	</description>
 	<tutorials>
 	</tutorials>