- `Main::setup` early exits (failure or `--help`/`--version`) now
consistently return `EXIT_FAILURE` or `EXIT_SUCCESS` on all platforms,
instead of 255 on some and a Godot Error code on others.
- `Main::start` now returns the exit code, simplifying the handling of early
failures.
- `Main::iteration` needs to explicit set the exit code in OS if it errors
out.
- Web and iOS now properly return `OS::get_exit_code()` instead of 0.
- Add contexts to give a better sense of benchmarked areas.
- Add missing benchmarks and adjust some begin/end points.
- Clean up names.
- Improve Android's internal benchmarks in a similar manner.
Co-authored-by: Fredia Huya-Kouadio <fhuya@meta.com>
Move the benchmarking measuring methods from `Engine` to `OS` to allow for platform specific overrides (e.g: can be used to hook into platform specific benchmarking and tracing capabilities).
Frame deltas are currently measured by querying the OS timer each frame. This is subject to random error. Frame delta smoothing instead filters the delta read from the OS by replacing it with the refresh rate delta wherever possible.
This PR also contains code to estimate the refresh rate based on the input deltas, without reading the refresh rate from the host OS.
The delta_smooth_enabled setting can also be modified at runtime through OS::, and there is also now a command line setting to override the project setting.
Adds a new OS::get_system_ca_certs method which can be implemented by
platforms to retrieve the list of trusted CA certificates using OS
specific APIs.
The function should return the certificates in PEM format, and is
currently implemented for Windows/macOS/LinuxBSD(*)/Android.
mbedTLS will fall back to bundled certificates when the OS returns no
certificates.
(*) LinuxBSD does not have a standardized certificates store location.
The current implementation will test for common locations and may
return an empty string on some distributions (falling back to the
bundled certificates).
Instead of reading files over the network, the new version uses a local file cache and only updates files when it changes.
The original remote filesystem was created 14 years ago, when ethernet was faster than hard drives or even flash. Also, mobile devices have a very small amount of storage.
Nowadays, this is no longer the case so the approach is changed to using a persistent cache in the target device.
Co-authored-by: m4gr3d
* Only two texture import modes for low/high quality now:
* S3TC/BPTC
* ETC2/ASTC
* Makes sense given this is the general preferred and most compatible combination in most platforms.
* Removed lossy_quality from VRAM texture compression options. It was unused everywhere.
* Added a new "high_quality" option to texture import. When enabled, it uses BPTC/ASTC (BC7/ASTC4x4) instead of S3TC/ETC2 (DXT1-5/ETC2,ETCA).
* Changed MacOS export settings so required texture formats depend on the architecture selected.
This solves the following problems:
* Makes it simpler to import textures as high quality, without having to worry about the specific format used.
* As the editor can now run on platforms such as web, Mac OS with Apple Silicion and Android, it should no longer be assumed that S3TC/BPTC is available by default for it.
As many open source projects have started doing it, we're removing the
current year from the copyright notice, so that we don't need to bump
it every year.
It seems like only the first year of publication is technically
relevant for copyright notices, and even that seems to be something
that many companies stopped listing altogether (in a version controlled
codebase, the commits are a much better source of date of publication
than a hardcoded copyright statement).
We also now list Godot Engine contributors first as we're collectively
the current maintainers of the project, and we clarify that the
"exclusive" copyright of the co-founders covers the timespan before
opensourcing (their further contributions are included as part of Godot
Engine contributors).
Also fixed "cf." Frenchism - it's meant as "refer to / see".
The warning causes messages to be spammed if you are calling this
method in a game that runs on both desktop and mobile platforms,
unless you guard all calls to `Input.vibrate_handheld()` with
`OS.has_feature("mobile") or OS.has_feature("web")`.
Since the limitation is already documented (and is obvious enough
given the method's name), the warning message is redundant.
Add support for font weight and stretch selection when using system fonts.
Add function to get system fallback font from a font name, style, text, and language code.
Implement system font support for Android.
Use system fonts as a last resort fallback.
- `_DEBUG` is MSVC specific so it didn't make much sense to define for
Android and iOS builds.
- iOS was the only platform to define `DEBUG`. We don't use it anywhere
outside thirdparty code, which we usually don't intend to debug, so it
seems better to be consistent with other platforms.
- Consistently define `NDEBUG` to disable assert behavior in both `release`
and `release_debug` targets. This used to be set for `release` for all
platforms, and `release_debug` for Android and iOS only.
- Due to the above, I removed the only use we made of `assert()` in Godot
code, which was only implemented for Unix anyway, should have been
`DEV_ENABLED`, and is in PoolAllocator which we don't actually use.
- The denoise and recast modules keep defining `NDEBUG` even for the `debug`
target as we don't want OIDN and Embree asserting all over the place.
These methods exist since the dawn of (open source) Godot and have hardly
been updated over time, so they barely work and I'm fairly sure nobody is
using them. (See #46505 for details.)
While some of the functionality they aimed to provide might be useful for
optimization work and introspection, this should likely be redesigned from
scratch with a cleaner and more modern interface (e.g. exposed via the
Performance singleton, or ResourceLoader, and a better API overall).
This method never did anything in Godot since 3.0, since its code
was commented out. The last time the method had an implementation
was in Godot 2.1.x.
Implements the standard Unix double dash (--) commandline argument:
* Arguments after a double dash (--) are ignored by Godot and stored for the user.
* User can access them via `OS.get_cmdline_user_args()`
Example:
`godot.exe scene_to_run.tscn --fullscreen -- --start-level 2`
* Allows running the game in "movie writer" mode.
* It ensures entirely stable framerate, so your run can be saved stable and with proper sound (which is impossible if your CPU/GPU can't sustain doing this in real-time).
* If disabling vsync, it can save movies faster than the game is run, but if you want to control the interaction it can get difficult.
* Implements a simple, default MJPEG writer.
This new features has two main use cases, which have high demand:
* Saving game videos in high quality and ensuring the frame rate is *completely* stable, always.
* Using Godot as a tool to make movies and animations (which is ideal if you want interaction, or creating them procedurally. No other software is as good for this).
**Note**: This feature **IS NOT** for capturing real-time footage. Use something like OBS, SimpleScreenRecorder or FRAPS to achieve that, as they do a much better job at intercepting the compositor than Godot can probably do using Vulkan or OpenGL natively. If your game runs near real-time when capturing, you can still use this feature but it will play no sound (sound will be saved directly).
Usage:
$ godot --write-movie movie.avi [scene_file.tscn]
Missing:
* Options for configuring video writing via GLOBAL_DEF
* UI Menu for launching with this mode from the editor.
* Add to list of command line options.
* Add a feature tag to override configurations when movie writing (fantastic for saving videos with highest quality settings).
Adds the is_process_running function to the native OS class and exposes it to script.
This is implemented on Windows and Unix platforms. A stub is provided for other platforms that do not support this function.
Documentation is updated to reflect new API function.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Windows export process:
Limit size of executable with embedded PCK to 4 GB.
Use "rcedit" before embedding PCK.
Capture and process "rcedit" errors.
Windows, Linux:
Add support for PCK loading from executable "pck" section.
This method can be used to get the CPU model name.
It can be used in conjunction with
`RenderingServer.get_video_adapter_name()` and
`RenderingServer.get_video_adapter_vendor()` for annotating benchmarks
and automatic graphics quality configuration.
Implemented via `BCryptGenRandom` on Windows.
Implemented via `getentropy` syscall when available.
Implemented via `/dev/urandom` device as a fallback.
The `/dev/urandom` fallback can be disabled via the `NO_URANDOM` build
flag.
Note: The HTML5 version relies on emscripten file system urandom
device which itself uses the Crypto API when available or the plain
old not crypto-safe `Math.random()` otherwise.
Restore get_entropy.
