-Allows merging several 2D objects into a single draw operation
-Use current node to clip children nodes
-Further fixes to Vulkan barriers
-Changed font texture generation to white, fixes dark eges when blurred
-Other small misc fixes to backbuffer code.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
Keeps track of the order in which items are collected by
_collect_ysort_children, and uses that order to break
ties between items with similar Y positions.
It can be enabled in the Project Settings
(`rendering/quality/screen_filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
It will also slightly brighten the scene's dark areas.
As a result, it should be enabled only when banding is noticeable enough.
This closes#17006.
- Makes all boolean setters/getters consistent.
- Fixes bug where `glow_hdr_bleed_scale` was not used.
- Split CameraEffects to their own source file.
- Reorder all Environment method and properties declarations,
definitions and bindings to be consistent with each other
and with the order of property bindings.
- Bind missing enum values added with SDFGI.
- Remove unused SDFGI enhance_ssr boolean.
- Sync doc changes after SDFGI merge and other misc changes.
When using the default setting (layer 1 set only) nothing is stored in the tscn file for a Light2D, hence it relies on the value in the constructor.
The problem is the constructed value is 1 in Light2D, and -1 in RasterizerCanvas::Light. -1 results in all bits being set so all occluders are shown, rather than just those in layer 1.
This PR changes Rasterizer::Canvas constructor to set to 1. An alternative is to have -1 as the value for layer 1 throughout.
(cherry picked from commit bf54fa5a62)
Instead of breaking the whole trace when encountering the sky/camera far clip, continue tracing and check if "hits" are sky/far clip or not. Prevents some objects not being reflected due to gaps.
The added `#` prevents clang-format from misinterpreting the meaning
of this statement and thus messing up the formatting of the next
lines up until the first `layout` statement.
Similarly, a semicolon is now enforced on `versions` defines to
prevent clang-format from messing up formatting and putting them
all on a single line. Note: In its current state the code will
ignore chained statements on a single line separated by a semicolon.
Also removed some extraneous lines missed in previous style changes
or added by mistake with said changes (e.g. after uniform definitions
that clang-format messes up somewhat too, but we live with it).
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Since it only accepts power-of-two values, exposing it as an enum
makes more sense. This also allows for adding property hints to indicate
the performance cost of each value.
This also improves property hints for MSAA and FXAA.
A vertical FOV of 75 degrees is roughly equivalent to a 91 degree
horizontal FOV on a 4:3 display (~107.51 degrees on 16:9),
which is close to the typical default FOV used in PC games.
Note that this doesn't apply to the in-editor camera which keeps its
FOV to 70. This is because it doesn't display in fullscreen;
its viewport only displays in the center of the editor (roughly).
This means the viewport won't cover the viewer's eyes as much. Therefore,
the editor camera FOV should be slightly lower to account for this.
Since this changes the default value, this may break existing projects
slightly.
For the record, this was already done in
https://github.com/godotengine/godot-demo-projects/pull/260
for the official demo projects.
- Resurrect it for GL ES 2
- Add it to the Vulkan rasterizer
- Expose the setting from the `RenderingServer`, since it does not belong in any specific rasterizer
Dual paraboloid shadowmaps were ending up with infinitely large volumes of area behind the hemisphere un-culled.
This change just adds a back plane to the convex shape used for the culling volume.
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
The size settings are more "just works", with default scale and depth scale
values that don't need much tweaking.
Additionally, a "skin" mode was added so skin looks better.
EDIT: Cleaned up SSR filter shader a bit.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
