3 options are available:
- Light and Sky (default)
- Light Only (new)
- Sky Only (equivalent to `use_in_sky_only = true`)
Co-authored by: clayjohn <claynjohn@gmail.com>
This can be used to fade lights and their shadows in the distance,
similar to Decal nodes. This can bring significant performance
improvements, especially for lights with shadows enabled and when
using higher-than-default shadow quality settings.
While lights can be smoothly faded out over distance, shadows are
currently "all or nothing" since per-light shadow color is no longer
customizable in the Vulkan renderer. This may result in noticeable
pop-in when leaving the shadow cutoff distance, but depending on the
scene, it may not always be that noticeable.
This provides a significant speedup for a small quality loss.
The quality loss is generally more noticeable during a project's
early stages of development (e.g. in level blockouts)
than it is in a finished project.
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
- Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.
- Reorder the Y scale enum to go from the lowest Y scale to the highest.
Also rename the "Disabled" setting to "100%" for clarity.
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance3D
(and therefore MeshInstance3D), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
This can be used to distinguish between integrated, dedicated, virtual
and software-emulated GPUs. This in turn can be used to automatically
adjust graphics settings, or warn users about features that may run
slowly on their hardware.
In scenes that have little to no overdraw, disabling the depth prepass
can give a small performance boost. Nonetheless, in most other scenarios,
the depth prepass should be left enabled as it improves performance
significantly.
On a GeForce GTX 1080 in 2002×1447 resolution, decreasing VoxelGI quality
from High to Low quality saves 1.2 ms of GPU time in a medium-sized
test scene. This only results in a minor drop in quality.
- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
Soft shadows are relatively expensive to filter. However, with the
default blur factors, it's not needed to use too many samples
(unless PCSS-like shadows are used with a large size). Textures
and screen-space antialiasing can also be used to mask the noise
pattern effectively.
On a GeForce GTX 1080, going from Medium to Low for both shadow types
saves 0.2-0.4 ms of GPU time per frame in 2560×1440 resolution.
This can translate to significantly higher savings on lower-end GPUs.
Given how the shader works, this improves rendering performance
even if lights with shadows are never used.
This can be used to improve 3D shadow rendering quality at little
performance cost. Unlike the existing Hard setting which is limited
to variable shadow blur only, it works with both fixed blur and
variable blur.
This allows for finer control over 3D rendering resolution.
Supersampling can also be performed by setting a 3D rendering
resolution above 1.0, which is useful for offline rendering or
for very high-end GPUs.
This property was intended to provide a way to have SSAO or VoxelGI
ambient occlusion with a color other than black. However, it was
dropped during the Vulkan renderer development due to the performance
overhead it caused when the feature wasn't used.
Convert GLTF Document to use ImporterMeshInstance3D.
Add a GLTFDocument extension list and an extension for converting the importer mesh instance 3d to mesh instance 3d.
Use GLTF module when the editor tools are disabled.
Modified the render server to be less restrictive on matching blend arrays and have more logging.
Misc bugs with multimesh.
Always index the meshes.
Add glTF2 uri decode for paths.
Add vertex custom apis.
Add scene importer api.
Change Color to float; add support for float-based custom channels in SurfaceTool and EditorSceneImporterMesh
Co-authored-by: darth negative hunter
<thenegativehunter2@users.noreply.github.com>
In the `master` branch, 16× MSAA caused the entire system to freeze
on NVIDIA GPUs. This is likely caused by graphics drivers not actually
implementing 16× MSAA, but combining 8× MSAA with 2× SSAA instead.
On top of that, modern shader complexity makes 16× MSAA very difficult
to use while keeping a good framerate. 8× MSAA is hard enough to use
as it is.
The project setting wasn't being used anywhere.
This also tweaks the property hints to denote that these properties
are only effective after a restart.
Since OpenGL will not be available in Godot 4.0, this exposes a
choice between Vulkan clustered and Vulkan mobile in the project manager.
Despite the name, Vulkan mobile has many benefits on desktop platforms.
It provides better performance on simple scenes, and ensures that you
won't accidentally use unsupported features while testing your project
on desktop platforms.
The Vulkan backend setting was made into a "basic" setting so that
it can be changed without having to enable the Advanced Settings toggle.
This also improves list formatting to use bullet points and tweaks
the property hint to be more descriptive.
* Shadow quality settings now specialization constant.
* Decal and light projector filters can be set.
* Changing those settings forces re-creation of the pipelines.
These changes should help improve performance related to shadow mapping, and allows improving performance by sacrificing decal and light projector quality.
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
The Optimized shadow depth range was removed in late 2020 in favor
of the Stable shadow depth range, but it still had a (broken) property
that allowed to enable it.
* Colors were imported as 16BPP (half float)
* Far most common use cases only require 8BPP
* If you need higher data precision, use a custom array, which are supported now.
**WARNING**: 3D Scenes imported in 4.0 no longer compatible with this new format. You need to re-import them (erase them from .godot/import)
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
-Mesh2D now works
-MultiMesh2D now works
-Polygon2D now works
-Added hooks for processing 2D particles
-Skeleton2D now works
2D particles still not working, but stuff needed for it is now implemented.
Various fixes to UV2 unwrapping and the GPU lightmapper. Listed here for
context in case of git blame/bisect:
* Fix UV2 unwrapping on import, also cleaned up the unwrap cache code.
* Fix saving of RGBA images in EXR format.
* Fixes to the GPU lightmapper:
- Added padding between atlas elements, avoids bleeding.
- Remove old SDF generation code.
- Fix baked attenuation for Omni/Spot lights.
- Fix baking of material properties onto UV2 (wireframe was
wrongly used before).
- Disable statically baked lights for objects that have a
lightmap texture to avoid applying the same light twice.
- Fix lightmap pairing in RendererSceneCull.
- Fix UV2 array generated from `RenderingServer::mesh_surface_get_arrays()`.
- Port autoexposure fix for OIDN from 3.x.
- Save debug textures as EXR when using floating point format.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
-Always use temporal reproject, it just loos way better than any other filter.
-By always using termporal reproject, the shadowmap reduction can be done away with, massively improving performance.
-Disadvantage of temporal reproject is update latency so..
-Made sure a gaussian filter runs in XY after fog, this allows to keep stability and lower latency.
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
-Much greater pairing/unpairing performance
-For now, using it for culling too, but this will change in a couple of days.
-Added a paged allocator, to efficiently alloc/free some types of objects.
And fixups:
- Add missing bindings in RenderingServer
- Remove duplicate ArrayMesh enum bindings (they're in Mesh already)
- Remove redundant _unhandled_key_input binding in Control (it's in Node
already)
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
Allow gradients and 2d images.
Use shader versions for LUT in tonemap
Co-authored-by: alex-poe <3957610+CptPotato@users.noreply.github.com>
Co-authored-by: QbieShay <cislaghi.ilaria@gmail.com>
Co-authored-by: Clay John <claynjohn@gmail.com>
Also separated Light2D in PointLight2D and DirectionalLight2D.
Used PointLight2D because its more of a point, and it does not work
the same as OmniLight (as shape depends on texture).
Added a few utility methods to Rect2D I needed.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
