Commit graph

106 commits

Author SHA1 Message Date
Hugo Locurcio
6aebc7b66e
Fix volumetric fog not rendering at densities lower than or equal to 0.001
This allows volumetric fog to render with the lowest density that
can be specified in the inspector (0.0001).
2022-10-13 00:45:49 +02:00
Rémi Verschelde
49891e4c2f Merge pull request from clayjohn/VULKAN-mobile-fog
Restore fog in vulkan mobile renderer.
2022-09-19 09:23:24 +02:00
clayjohn
2ecc8b9a73 Restore fog in vulkan mobile renderer.
The condition accidentally disabled fog whenever it was enabled
2022-09-16 09:18:11 -07:00
Hugo Locurcio
ca9ba968d8
Improve volumetric fog and FogVolume documentation 2022-09-15 02:19:22 +02:00
Rémi Verschelde
d63c6fc463 Merge pull request from Calinou/environment-fog-and-sky-affect 2022-09-01 23:52:34 +02:00
Hugo Locurcio
699e9f7966
Add Environment properties to control fog rendering on background sky
Values lower than 1.0 can be used to make the fog rendering not fully
obstruct the sky. This can be desired when using fog as a purely
atmospheric effect, without intending to use fog for open world fog
fading.

When set to 0.0, fog rendering behavior will be similar to Godot 3.x
where sky rendering was never affected by fog.
2022-09-01 19:07:39 +02:00
clayjohn
385ee5c70b Implement Physical Light Units as an optional setting.
This allows light sources to be specified in physical light units in addition to the regular energy multiplier. In order to avoid loss of precision at high values, brightness values are premultiplied by an exposure normalization value.

In support of Physical Light Units this PR also renames CameraEffects to CameraAttributes.
2022-08-31 12:14:46 -07:00
Andy Maloney
ea2192b99e [doc] Use "param" instead of "code" to refer to parameters (6) 2022-08-12 12:07:53 -04:00
Yuri Sizov
c5d7115038 Rename the argument tag to param in XML documentation 2022-08-08 22:34:31 +03:00
Hugo Locurcio
e35e79b802
Tweak default fog settings for better appearance
- Increase the default non-volumetric fog density to 0.01 to make
  adjustments more visible.
- Use a less saturated non-volumetric fog color by default
  (a mix of the sky and horizon colors of the new default
  ProceduralSkyMaterial).
- Set Volumetric Fog Gi Inject to 1.0 by default. Injecting GI results
  in more realistic appearance of volumetric fog, at a very low
  performance cost.
2022-08-01 02:04:20 +02:00
Rémi Verschelde
7d999b7507
Merge pull request from Calinou/doc-tonemap
Improve documentation for tonemapping operators
2022-04-29 23:14:29 +02:00
Hugo Locurcio
91f9a48ada
Merge pull request from Calinou/doc-environment 2022-04-29 21:50:08 +02:00
FireForge
bb7e6e9951 Rename "ss_reflections_" to "ssr_" in Environment 2022-03-25 14:37:01 -05:00
Hugo Locurcio
25434531cd
Document the Environment class 2022-03-23 16:46:53 +01:00
Hugo Locurcio
003e1e6217
Improve documentation for tonemapping operators 2022-03-22 12:14:51 +01:00
Rémi Verschelde
78a767edb3
Merge pull request from Calinou/doc-add-xml-schema 2022-02-15 13:14:58 +01:00
Hugo Locurcio
b68dd2e189
Add an XML schema for documentation
This makes it easier to spot syntax errors when editing the
class reference. The schema is referenced locally so validation
can still work offline.

Each class XML's schema conformance is also checked on GitHub Actions.
2022-02-15 00:03:31 +01:00
Hugo Locurcio
c10e97b604
Clamp environment light sky contribution to the [0.0; 1.0] range
The value is already clamped in the editor, but it wasn't being
clamped when the value was set via code. Values outside the [0.0; 1.0]
range can result in broken rendering.
2022-02-14 17:15:32 +01:00
Rémi Verschelde
c6199da8b8
Merge pull request from Calinou/tweak-sdfgi-defaults 2022-02-10 17:31:54 +01:00
Hugo Locurcio
7721e19ccc
Tweak default SDFGI settings for better quality
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
  - Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
  at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.

- Reorder the Y scale enum to go from the lowest Y scale to the highest.
  Also rename the "Disabled" setting to "100%" for clarity.
2022-02-06 15:28:59 +01:00
Hugo Locurcio
b9cfc74f29
Decrease the default number of SDFGI cascades to 4
This improves rendering performance noticeably, especially when the
camera moves fast.

On a medium-sized test scene on a GTX 1080 in 2560×1440, going
from 6 to cascades saves 0.5 ms of frame time while looking visually
identical (as most of the scene fits within the 4 cascades).
2022-02-06 15:01:25 +01:00
Rémi Verschelde
58324f4df8
Merge pull request from Ansraer/glow_map 2022-01-26 13:39:51 +01:00
Rémi Verschelde
7e3b92f81f
Merge pull request from Calinou/rename-bake-mode-properties 2022-01-20 17:35:32 +01:00
Ansraer
90652b1755 add support for glow maps 2022-01-20 16:47:25 +01:00
Hugo Locurcio
2dc7b03a82
Allow using between 1 and 8 cascades for SDFGI
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
2022-01-17 16:49:02 +01:00
Rémi Verschelde
7f66c16c03
Merge pull request from clayjohn/Vulkan-ASSGI 2022-01-04 10:00:17 +01:00
Hugo Locurcio
e962900f23
Rename and reorder bake mode properties for consistency
The order now goes from least to most computationally expensive:

- Disabled
- Static
- Dynamic
2021-12-14 12:01:12 +01:00
Rémi Verschelde
6c1bd4d227
Replace Godot docs URL with $DOCS_URL in XML class reference 2021-11-15 13:02:21 +01:00
Hugo Locurcio
f50aeb531b
Improve documentation related to global illumination 2021-11-14 23:48:12 +01:00
Andrii Doroshenko (Xrayez)
6742a338a8 Rename GradientTexture to GradientTexture1D
1. Explicit and unambiguous when comparing to `GradientTexture2D`
2. Consistent with other class names where 1D is used in the engine.
2021-11-07 15:11:04 +02:00
clayjohn
0eff109a21 Added SSIL post processing effect 2021-11-06 12:43:19 -07:00
Hugo Locurcio
ce97ddbcb1
Rename GLES2 driver to OpenGL to prepare for the upgrade to GLES3
- Use lowercase driver names for the `--rendering-driver`
  command line argument.
2021-10-30 02:05:49 +02:00
clayjohn
1b2cd9f251 Addition of FogVolumes, FogShaders, FogMaterial, and overhaul of VolumetricFog
Co-authored-by: Brian Semrau <brian.semrau@gmail.com>
2021-10-28 22:02:23 -07:00
Brian Semrau
a62e240260 Fix the height fog effect 2021-10-14 04:08:39 -04:00
Rémi Verschelde
a6c4de49e1
Merge pull request from Calinou/remove-occlusion-color 2021-10-07 22:26:10 +02:00
Hugo Locurcio
0269d8e871
Clamp Environment's SSR fade-in and fade-out to positive values
Negative values result in rendering glitches.
2021-10-07 17:59:55 +02:00
Hugo Locurcio
265bae824f
Remove unimplemented Environment.ambient_light_occlusion_color property
This property was intended to provide a way to have SSAO or VoxelGI
ambient occlusion with a color other than black. However, it was
dropped during the Vulkan renderer development due to the performance
overhead it caused when the feature wasn't used.
2021-10-07 17:47:52 +02:00
Rémi Verschelde
7adf4cc9b5
doc: Use self-closing tags for return and argument
For the time being we don't support writing a description for those, preferring
having all details in the method's description.

Using self-closing tags saves half the lines, and prevents contributors from
thinking that they should write the argument or return documentation there.
2021-07-30 15:29:52 +02:00
Michael Alexsander Silva Dias
0ff4095b36 Better format arguments in variant parser 2021-06-18 00:06:40 -03:00
reduz
32625145c8 Rename GI Classes
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI

As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
2021-06-05 09:28:56 -03:00
Hugo Locurcio
217192b9e0
Document how to avoid light leaks with GIProbe and SDFGI 2021-03-28 01:05:01 +01:00
Rémi Verschelde
0d1d719178 doc: Sync classref with current source
And fix various bogus bindings following previous PRs.
2021-02-19 14:39:14 +01:00
Rémi Verschelde
9b623635c8
doc: Sync classref with current source 2021-02-08 12:34:28 +01:00
clayjohn
44f8922305 Port ASSAO to Godot to replace SAO 2020-12-21 23:08:59 -08:00
clayjohn
076908bed9 Environment brightness, contrast, saturation restore with color correction.
Allow gradients and 2d images.

Use shader versions for LUT in tonemap

Co-authored-by: alex-poe <3957610+CptPotato@users.noreply.github.com>
Co-authored-by: QbieShay <cislaghi.ilaria@gmail.com>
Co-authored-by: Clay John <claynjohn@gmail.com>
2020-11-28 07:37:49 -08:00
Juan Linietsky
53d5a252bb
Revert "Replace SAO implementation with MSSAO" 2020-10-18 19:27:51 -03:00
Juan Linietsky
d98261ab8f
Merge pull request from clayjohn/MSSAO
Replace SAO implementation with MSSAO
2020-10-18 18:34:43 -03:00
Juan Linietsky
e799a2ba45
Merge pull request from clayjohn/Vulkan-new-glow
Optimize Glow with local memory
2020-10-18 18:32:36 -03:00
clayjohn
366ee46774 Replace SAO implementation with MSSAO 2020-10-18 13:15:51 -07:00
clayjohn
63a34b93aa Optimize Glow with local memory 2020-10-18 11:37:12 -07:00