Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
When creating a window, Godot would first register it to the WM(show it) and then set its flags.
This works fine on a floating WM, but on tiling WMs as soon as a window gets registered
the WM immediately acts on the window by scaling it up and treating it as a generic window,
being registered without any special flags.
This commit separates the showing of the window into another function and calls it after the most important flags are set,
making windows with special flags(eg. all popups) work again on tiling WMs.
Fixes#37930
- Makes all boolean setters/getters consistent.
- Fixes bug where `glow_hdr_bleed_scale` was not used.
- Split CameraEffects to their own source file.
- Reorder all Environment method and properties declarations,
definitions and bindings to be consistent with each other
and with the order of property bindings.
- Bind missing enum values added with SDFGI.
- Remove unused SDFGI enhance_ssr boolean.
- Sync doc changes after SDFGI merge and other misc changes.
When using the default setting (layer 1 set only) nothing is stored in the tscn file for a Light2D, hence it relies on the value in the constructor.
The problem is the constructed value is 1 in Light2D, and -1 in RasterizerCanvas::Light. -1 results in all bits being set so all occluders are shown, rather than just those in layer 1.
This PR changes Rasterizer::Canvas constructor to set to 1. An alternative is to have -1 as the value for layer 1 throughout.
(cherry picked from commit bf54fa5a62)
Instead of breaking the whole trace when encountering the sky/camera far clip, continue tracing and check if "hits" are sky/far clip or not. Prevents some objects not being reflected due to gaps.
Each driver used to define the (same) project settings values
`audio/mix_rate` and `audio/output_latency`, but the setting names are
not driver specific.
Overriding is still possible via platform tags.
The added `#` prevents clang-format from misinterpreting the meaning
of this statement and thus messing up the formatting of the next
lines up until the first `layout` statement.
Similarly, a semicolon is now enforced on `versions` defines to
prevent clang-format from messing up formatting and putting them
all on a single line. Note: In its current state the code will
ignore chained statements on a single line separated by a semicolon.
Also removed some extraneous lines missed in previous style changes
or added by mistake with said changes (e.g. after uniform definitions
that clang-format messes up somewhat too, but we live with it).
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
This reverts commit 1058a57666.
RenderingDevice is meant to be instantiated in scripts, not a singleton.
This actually doesn't work properly right now, but reduz will fix it.
Since it only accepts power-of-two values, exposing it as an enum
makes more sense. This also allows for adding property hints to indicate
the performance cost of each value.
This also improves property hints for MSAA and FXAA.
A vertical FOV of 75 degrees is roughly equivalent to a 91 degree
horizontal FOV on a 4:3 display (~107.51 degrees on 16:9),
which is close to the typical default FOV used in PC games.
Note that this doesn't apply to the in-editor camera which keeps its
FOV to 70. This is because it doesn't display in fullscreen;
its viewport only displays in the center of the editor (roughly).
This means the viewport won't cover the viewer's eyes as much. Therefore,
the editor camera FOV should be slightly lower to account for this.
Since this changes the default value, this may break existing projects
slightly.
For the record, this was already done in
https://github.com/godotengine/godot-demo-projects/pull/260
for the official demo projects.
- Resurrect it for GL ES 2
- Add it to the Vulkan rasterizer
- Expose the setting from the `RenderingServer`, since it does not belong in any specific rasterizer
Dual paraboloid shadowmaps were ending up with infinitely large volumes of area behind the hemisphere un-culled.
This change just adds a back plane to the convex shape used for the culling volume.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
The size settings are more "just works", with default scale and depth scale
values that don't need much tweaking.
Additionally, a "skin" mode was added so skin looks better.
EDIT: Cleaned up SSR filter shader a bit.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
Namely:
```
modules/basis_universal/register_types.cpp: In function 'Ref<Image> basis_universal_unpacker(const Vector<unsigned char>&)':
modules/basis_universal/register_types.cpp:266:15: warning: 'imgfmt' may be used uninitialized in this function [-Wmaybe-uninitialized]
266 | image->create(info.m_width, info.m_height, info.m_total_levels > 1, imgfmt, gpudata);
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
modules/basis_universal/register_types.cpp:255:39: warning: 'format' may be used uninitialized in this function [-Wmaybe-uninitialized]
255 | bool ret = tr.transcode_image_level(ptr, size, 0, i, dst + ofs, level.m_total_blocks - i, format);
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
```
servers/visual_server.cpp: In member function 'Error VisualServer::_surface_set_data(Array, uint32_t, uint32_t*, uint32_t, Vector<unsigned char>&, int, Vector<unsigned char>&, int, AABB&, Vector<AABB>&)':
servers/visual_server.cpp:636:15: warning: 'iw' may be used uninitialized in this function [-Wmaybe-uninitialized]
636 | copymem(&iw[i * 2], &v, 2);
| ^
```
```
core/image.cpp: In member function 'Error Image::generate_mipmap_roughness(Image::RoughnessChannel, const Ref<Image>&)':
core/image.cpp:1683:11: warning: 'roughness' may be used uninitialized in this function [-Wmaybe-uninitialized]
1683 | float roughness;
| ^~~~~~~~~
```
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
Fix -Wunused-variable, -Wunused-but-set-variable and -Wswitch warnings
raised by GCC 8 and 9.
Fix -Wunused-function, -Wunused-private-field and
-Wtautological-constant-out-of-range-compare raised by Clang.
Fix MSVC 2019 warning C4804 (unsafe use of type 'bool' in comparison
operation).
GCC -Wcpp warnings/Clang -W#warnings (`#warning`) are no longer raising
errors and will thus not abort compilation with `werror=yes`.
Treat glslang headers are system headers to avoid raising warnings.
Re-enables us to build with `werror=yes` on Linux and macOS, thus
catching warnings that would be introduced by new code.
Fixes#36132.
Lots of internal API changes and some docstrings were lost in the conversion.
I manually salvaged many of them but for all the rendering-related ones, an
additional pass is needed.
Added missing enum bindings in BaseMaterial3D and VisualServer.
