- The grid is now infinite, it follows the camera.
- The grid is now dynamic, if you zoom in and out, the grid subdivides,
expands, and fades.
- You can now enable grid planes for the XY and YZ planes. Only the flat
XZ plane is enabled by default. Each plane is independently dynamic
of the others.
- The default grid size has been increased to 200, and the maximum
has been increased to 2000. At 1000, the grid mostly looks edgeless.
- If you set the division level max and min to the same value then
the grid does not expand or subdivide, but instead stays the same size
and just follows the camera. Also, if these values are the same,
the bias value does nothing.
- If you want to have Blender-like behavior, set max to 1, min to 0,
and set the bias to a really low value. You may also wish to increase
the grid size if you have a small bias.
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
- Draw two boxes slightly offset from each other to give the illustion
of a thicker outline.
- Decrease the offset compared to the 3D node's AABB to give a more
accurate representation of its size.
- Make the box fully visible instead of only displaying the corners.
- Draw a x-ray version of the box that's more translucent, but visible
through walls. This helps make the box more visible while still
having a sense of depth.
- Use an orange color similar to the 2D editor.
Undo/redo log messages will now specify the modified node's
name (or number of modified nodes if several were modified).
On top of that, the new position/rotation/scale/pivot offset
will also be mentioned in the message.
(cherry picked from commit 996740de43)
Hide the back sides of the rotation gizmo circles and add a white
outline for better visualization of the rotation "sphere".
This is a 3.2 backport of @JFons work on the master branch; all credit
goes to him.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
Treats application unfocus as a mouse release for
TOOL_PAINTING, by finishing the undo state and
resetting the tool. Also sets a flag to prevent extra
lines from being drawn when the application is refocused.
fixes#42398, fixes#24970
(cherry picked from commit 70a4cd1afe)
Batching is mostly separated into a common template which can be used with multiple backends (GLES2 and GLES3 here). Only necessary specifics are in the backend files.
Batching is extended to cover more primitives.
Entering text will now start searching automatically after 0.25 seconds
have passed (debounce delay).
This removes the need for a separate Search button.
(cherry picked from commit 6055db2a72)
Fixed issue where using arrows to change the selected tile would not reach all subtiles in an autotile, only going up to the second to last row and column.
Patch for #21755. Node scaling arrows pointed the wrong way when nodes were rotated. Ammend: made math cleaner.
Simplified expression
Changes suggested by Aaron Franke
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
(cherry picked from commit 603febdbfe)
When changing the texture region for a StyleBox, the regions was not updating automatically in the Texture editor.
(cherry picked from commit 7d7727bade)
Fixes#34509 where the theme editor would push away the inspector
if something like "hseperation" is really high.
Now `set_enable_h_scroll` is true which fixes this.
(cherry picked from commit d602be077d)
Ensures that the editor preview when placing a tile on a TileMap takes
into account the transformation of the TileMap. Previously, only the
origin of the Tile was transformed, but not its orientation or
scaling.
(cherry picked from commit cf04aabef1)
This removes:
```
ERROR: get_breakpoints: Condition ' base.begins_with("local://")
```
while running a project with blank scripts caused by deleting
or moving, or built-in scripts which are not yet saved within a scene
on running a project.
(cherry picked from commit 1c70a33d9c)
Methods were being called with InputEventMouseMotion instead of InputEventPanGesture, and they were null.
Fixesgodotengine/godot#16181 on the master branch
(cherry picked from commit 394a7826be)
A static function is added to EditorNode which allows for filename
disambiguation given a list of filenames and the corresponding list of
absolute paths for those files. This function is then used to
disambiguate scene and script tabs in the editor.
(cherry picked from commit 4285211f40)
This change avoids the editor to freeze for several seconds when a
project with lots of scripts is loaded in the editor.
It focuses on a few heavy operations previously executed on all
previously loaded scripts:
- Initialize script resource (script validation/parsing) only
on focus
- ScriptTextEditor: code editor and edit menu are added to the
scene only on focus
- Add to recent scripts only when opening new scripts
(load/save scene metadata)
`ConvexPolygonShape2D` and `ConcavePolygonShape2D` are only meant to be
used directly in code and not in the editor for physics-based use cases
specifically.
Developers are advised to use `CollisionPolygon2D` instead, which does
generate those shapes under the hood, handling polygon convexivity,
proper orientation etc.
(cherry picked from commit dc446203be)
Fix to ensure that undo/redo works when painting bones in the Polygon2D
UV editor. Previously, bone painting would continue silently in the
background, because a mouse click signalling the end of an edit would
not be appropriately dealt with.
(cherry picked from commit 6e60aa3876)
This fixes issue #39844, where the confirmation dialog when a user
attempts to close an unsaved script did not actually save it even after
clicking "Save."
(cherry picked from commit d2a5b92e9b)
Ensures that closure of Polygon2D in the editor takes into account
Grid Snap if enabled. Does this by comparing the polygon start with
grid snap applied to mouse click location. Note: transformation is
applied in order to deal with different editor zoom levels.
(cherry picked from commit b8d55b244a)
Modifies polygon auto-completion based on UV editor scale, in order
to enable finer grained control for the user. Enables selection of
points closer than the current threshold of 8 pixels.
(cherry picked from commit 69d0d89214)
Ensures no error is issued when attempting to preview a resource that
may be scaled down to <1 pixel when resizing to fit the thumbnail.
(cherry picked from commit c7a8dc7bb9)
Occurred when selecting polygon collision mode, then drawing a single point, then selecting rectangle mode, and finally trying to select a rectangle.
(cherry picked from commit 7850d0316f)
Now that the 3D editor grid is infinite and adjusts its step automatically,
this helps people get a better sense of scale when moving around in the
3D viewport.
This also fixes the indicator bar drawing on hiDPI displays.
(cherry picked from commit eaae50fe4a)
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
- properly visit power of 2 factors (50%, 100%, 200%...)
- index based zoom values to prevent floating point issues
- Fix 2d editor not able to reach min and max zoom values
(cherry picked from commit fea6ca20c9)
This was previously implemented in the GridMap editor. This makes
the same feature available in the TileMap editor.
(cherry picked from commit def2059d67)
- Make the Ignore button's position identical across all warnings
by moving it to the left.
- Change the Ignore button's text and color to make it more obvious
that it can be clicked.
- Use the editor font instead of the default project font to match
the rest of the editor.
(cherry picked from commit 0c0ee427d2)
It made minor adjustments difficult as the camera moved every time
Align Transform With View was used.
This closes#36738.
(cherry picked from commit a636631e33)
The indexes for the ScriptEditorItemData entries were not getting
updated after sorting. This would cause a page to be open but with a
different tab selected. Whenever _update_script_names was called next,
it would correct this indexing. Now we correct it immediately following
the tab sort.
(cherry picked from commit fe53c1b0bd)
hiding script's panel, helps some users to conserve more space for code text.
this fix remembers script's panel visibility state in project's metadata and restore it on editor start.
Thanks to this, users who never use it and are forced to close it each time editor starts, may close it just once and it will stay like this on next sessions until manually opened again.
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
This makes the script name appear before the scene file name,
which ensures it's always visible even if the list of scripts is too
narrow to display the full name.
This only impacts built-in scripts with custom resource names.
Unnamed resources will still use `<scene_file>::<id>` naming
in the list of scripts.
(cherry picked from commit e90beade15)
The Request Docs button is partly responsible for layout overflow
issues on narrow displays, such as #31133.
It also tended to attract spam and low-effort issues that were
difficult to act upon. A "Send Docs Feedback" menu option has been added
to replace it.
(cherry picked from commit 2f6f029a75)
Fixes#18809.
The in-editor ortho camera used a far clipping plane of 8192 units, and was
placed 4096 units away from the camera cursor.
This was far enough to cause culling issues from floating point precision loss
on objects smaller than one unit.
This change modifies the near/far clipping planes of the ortho camera to use
those specified in the editor (and currently used by the perspective camera).
The frustum is still centered around the camera cursor location, as it was
before.
Changes made:
* Added dirty bit for SpatialEditorSelectedItem's last_xform
* SpatialEditorViewport checks that dirt bit too before skipping the selection
(cherry picked from commit 19825436d4)
Alignment of scene pixels on screen pixel ensure a crisp rendering of small features (such as text). Unfortunately, alignment of top left pixel on screen adds a lot of jittering when zooming at high zoom factor.
This change allow to snap the top left scene pixel on the closest screen pixel (not only the top-left most), and we do so only when the scale factor is an integer.
(cherry picked from commit 1c02906a6f)
The AABB for an empty Spatial has 0 size, since the stored and
compared Transform was scaled by the AABB size, it would completely
destroy the rotation information. If there is no rotation
information, the gizmo doesn't update when the rotation changes.
(cherry picked from commit a0af3094b4)
The new default keys were chosen to match common graphics editing
software. A modifier is no longer required to use the Select tool,
making it faster to use.
This closes#34170.
(cherry picked from commit 88213b54ba)
It was removed after the implementation of VHACD. Generating a single
shape can lead to better performance, so it may still be desired.
This also adds tooltips for several options in the Mesh menu.
This closes#35692.
(cherry picked from commit 90af009f2e)
Suppose that the user wants to use some guidelines in 2D mode. The
user has enabled "Use Pixel Snap", and configured the "Grid Step" to
1px.
On some zoom levels, when dragging the guidelines step by step, some
offsets shows the wrong value. The offsets that are wrong vary - it is
affected by the zoom level, so some zoom levels do not display this
problem.
For example, a user may see this while dragging the guideline:
0px 1px 1px 3px 4px 5px 5px 7px 8px
whereby 2px and 6px are missing.
This is due to a floating-point error. The values are printed as
(truncated) integers, but they are actually decimals, so they were
actually 1.9999 and 5.9999 for the missing cases.
Let's fix that by rounding up the values before printing them to get rid
of the errors.
This fixes#35010.
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
Tab characters were not rendered properly in the breakpoints and
bookmarks lists of the script editor if the bookmarked line was a
comment, resulting in unknown ASCII symbols “�”.
Fixes#34046.
Also changed formatting a bit to enclose the code in backticks (like in
Markdown) instead of quotes.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
The crosshair makes freelook navigation a bit easier, while making it
clearer that it's possible to select nodes by clicking while in
freelook mode.
The crosshair is only displayed while in freelook mode.
It uses an icon designed to be visible on any background.
The zoom level displayed is now relative to the editor scale.
This means that with an editor scale of 200%, the 100% zoom level
will actually be 200% as it's multiplied by the editor scale.
This prevents things from looking too small when opening a project
on an hiDPI display.
This matches the behavior found in most image editors out there.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
* "Add" button text in Groups Editor
* "Receiver Method" in Connect Signal Dialog
* "Play Mode" in Animation State Machine Editor
* "Mesh Library" button text in Mesh Library editor plugin
* Compose Array node button texts in Visual Script
* Various button texts in TileSet Editor
* Various Run Script errors
This was caused by the fact that the points were being iterated sequentially and we were breaking out of the loop as soon as we found a point that was "close enough", rather than actually finding the closest point. The previous fix exposed this new issue.
Case 1: start and stop an animation in the inspector
Case 2: start an animation in the inspector, then stop and start again in the track editor
Fixes#34021
An error was systematically triggered on the root bone, when trying to access its parent (the return value wasn't used in this case anyway).
Fixes#23920
It will now raise an error whenever this happens so that we can fix
these situations. `max == min` is not allowed as it could lead to
divisions by zero in ratios, and `max < min` doesn't make much sense.
Fixes#33907.
- Fixed "Previous Script" shortcut not working (CTRL+SHIFT+<)
- Fixed crash (integer division by zero) when using previous/next script shortcut with no script open
- Fixed error when dropping a script file with no script open
ERROR: ItemList::get_item_metadata: Index p_idx=-1 out of size (items.size()=0)
At: scene\gui\item_list.cpp:257
This change allows StyleBox preview to take shadows and content margins into account to display how a whole panel would be rendered.
The preview control clips contents so that in any case it doesn't bleed on controls around.
Fixes#33801
This makes it easier to navigate in 3D when using a graphics tablet.
This fallback modifier will only be available if no other modifier
is using Alt.
This partially addresses
https://github.com/godotengine/godot-proposals/issues/196.
A "primary" line is drawn every 8 steps by default,
which makes it easier to measure distances for snapping.
This value can be configured in the Configure Snap dialog.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
This makes precise adjustments easier, without having to
touch the mouse wheel. This modifier is also available in
Blender, so this makes the freelook behavior more consistent
with it :)
In the interest of simplifying the Editor Settings, this also
removes the freelook modifier speed factor setting
(the value is now hardcoded to its default).
When using the built-in docs, Godot would not support the shortcut "Shift + F3"
to search for the previous occurrence of the search entry text, thus causing an
inconsistent behaviour when using shortcuts in the "ScriptEditor" compared to
using them in the "ScriptTextEditor".
The previous parameter of the function "EditorHelp::_search()" in the class
"editor_help" seems to be unused, thus replaced with a bool representing to
search for previous search entry text or not. By adding the shortcut to
Godot's "ScriptEditor", this commit now improves Godot's consistensy when
using shortcuts.
Fixes#31147.
Co-Authored-By: Oscar Ferm <oscfer-6@student.ltu.se>
- Add or remove the necessary subdirectorires to the includes to remove
dependency on the editor directory being in the build's include path.
- Ensure includes in modified files conform to style guideline.
- Remove editor from the build include path.
Removed default shortcut because of the conflict mentioned in the issue.
Command + Shift + T would conflict with Soft Reload Script,
and this shortcut doesn't seem to be needed very often.
- No reduced Rect in march square algorithm, it was causing inconsistent cases near the borders and made the outline less accurate
- Ignore invalid generated polygons (under 3 points) to avoid unnecessary errors and crashes
- Error popup only when no polygon could be generated at all
- Added option to shrink pixels (to get rid of small separate islands)
- Fixed polygon preview (lines were sometimes not showing along the borders)
Fixes#32564, #29267
- Display the shortcut in the button tooltips by defining the shortcut
on the buttons as well.
- Swap "Step Over" and "Step Into" in the Debug menu to match the button
order in the Debugger bottom panel.
This makes it possible for the user to know precisely the current
zoom level. The zoom percentage can be clicked to reset it to 100%
(similar to Firefox).
- Reorganized buttons layout to make it clearer between deleting animation & frame
- Added a confirmation popup for deleting an animation
- Fixed errors on selecting an animation after deleting one
The reverse sorting options are now integrated in the list of
sorting options, making the "Reverse" button unnecessary.
This pattern tends to be easier to discover by users.
The "Downloads" sorting option was also removed as it's not
implemented in the backend.
Holding Ctrl will snap the selected point/tangent by increments
of 10% of the curve's width/height. Holding Shift as well will snap
by increments of 2.5% instead.
Add Navigation category for scroll and minimap settings.
Rename Line Numbers category to Appearance.
Rename Open Scripts category to Script List.
Rename "Draw Minimap" setting to "Show Minimap" (this is more consistent with other settings).
Reorder settings by category in code_editor.cpp to match settings list
There is a new setting for Default ColorPicker color mode in Editor Settings->Interface->Inspector. Initially this setting will be RGB. Editor ColorPicker will always start with mode defined in this settiing.
Fixes#30755 and #30754
The asset library will now fade when loading pages instead
of displaying a progress bar, which is a more common design pattern
when browsing an online resource's pages.
A "Loading..." text will be displayed before the first page loads.
- Add new handle icons for path/polygon editors
- Add smooth path point icons and curve tangent icons
- Use a gray color for tangent lines in the Path2D and Path editors
- Use antialiasing for Path2D lines
- Display an error message if no selected nodes could be snapped
- Only register an undo/redo action if at least one node
could be snapped
- Increase the maximum snapping height to 20
- Increase the negative snapping limit to 0.2
This makes the tooltips display the correct shortcuts in case
they are changed, as is done automatically by `set_shortcut()`.
Button shortcuts are now used to apply shortcut actions,
which makes for cleaner code.
Condensed some if and ERR statements. Added dots to end of error messages
Couldn't figure out EXPLAINC. These files gave me trouble: core/error_macros.h, core/io/file_access_buffered_fa.h (where is it?),
core/os/memory.cpp,
drivers/png/png_driver_common.cpp,
drivers/xaudio2/audio_driver_xaudio2.cpp (where is it?)
- Display an error message if the selected node doesn't
extend from Spatial
- Display the selected node name in error messages to provide
additional context when relevant
- Clarify error messages
- Use the standard editor warning dialog
- Clean up the recent scripts dialog to match the recent scenes dialog
- Add "..." at the end of shortcuts that cause a modal dialog to appear
This closes#31148.
So far we left most temporary files lying around, so this attempts to
fix that.
I added a helper method to DirAccess to factor out the boilerplate of
creating a DirAccess, checking if the file exists, remove it or print
an error on failure.
This makes the step of the "frame" SpinBox larger, so that clicking
on the SpinBox arrows will make the number increase in a visible manner.
Previously, the full number was being cut off due to the SpinBox
being narrow.
This also makes the "step" SpinBox allow for more precise input.
Snapping can now be toggled temporarily by holding the Ctrl key.
Toggling timeline snapping is now done with the "Snap" checkbox rather
than by setting the animation's "Step" setting to 0.
The timeline cursor can no longer exit the animation's boundaries
if the animation's "Step" is set to 0.
When adjusting the vertices of a navigation polygon, the tile editor would create a duplicate navigation polygon. So each time you made an adjustment, another copy of the polygon would be created.
Due to the TileSet coordinates using x for columns and y for rows, the
columns are assigned to the rows in the TileMap palette and distort the
order. Thus the default sorting algorithm prioritizing x is replaced
with a custom one prioritizing y.
Fixes#24751
The new colors should make it easier to see the manipulator gizmo.
Highlighted gizmos are now fully opaque (instead of being white),
keeping the color information while a gizmo is highlighted.
This also adds a setting hint for the manipulator gizmo opacity
editor setting.
Axis colors were taken from Blender 2.80.
This partially addresses #16154.
