Commit graph

123 commits

Author SHA1 Message Date
Fabio Alessandrelli
15ecdb5f00 Fix buffer size check in UDP socket.
We were reserving 12 bytes from the buffer for ip, port, and length, but since
IPv6 introduction we should be reserving 24 (IPv6 are 16 bytes)

(cherry picked from commit 5dc7c920bf)
2017-03-22 21:11:49 +01:00
Fabio Alessandrelli
994df5df5c Use default UDP ring buffer size of 65536 for clients
We should probably create a specific function for setting the
recv buffer anyway. UDP sockets does not need to bind (listen)
to be able to call recvfrom. This is especially useful for clients
who just call set_send_address and start communicating with a server.

(cherry picked from commit 9336857132)
2017-03-22 21:07:27 +01:00
Fabio Alessandrelli
7dbccc9a57 Fix bug causing UDP socket to close after the first send if not listening
The ring buffer for receiving packets was not resized in constructor

(cherry picked from commit 68dc969f8c)
2017-03-22 21:05:27 +01:00
Fabio Alessandrelli
9f41c0a356 Avoid deadlock when writing/reading data on a connecting TCP socket
TCP status polling is always performed as non blocking.
Trying to put a packet on a connecting socket will fail immediately.

(cherry picked from commit fa0cb7da0e)
2017-03-22 21:03:26 +01:00
Fabio Alessandrelli
86de0bd081 Bind to IPv4 on OpenBSD when using wildcard
OpenBSD does not support binding on both IPv4 and IPv6 using the same socket

(cherry picked from commit 619e7a2c8b)
2017-03-22 21:01:14 +01:00
Fabio Alessandrelli
d9525082fe Remove set_ip_type from network classes (no longer needed)
- TCP:
  - `listen` bind to wildcard "*" -> dual stack socket
  - `listen` bind to address -> socket from address type
  - `connect` -> resolve using best protocol (UNSPEC), socket from address type

- UDP:
  - `listen` bind to wildcard "*" -> dual stack socket
  - `listen` bind to address -> socket from address type
  - `put_packet`/`put_var` -> resolve using TYPE_ANY (UNSPEC), socket from address type
    (to change socket type you must first call `close` it)

(cherry picked from commit 88a56ba783)
2017-03-22 21:00:23 +01:00
Fabio Alessandrelli
0b9684a085 Implement UDP listen bind address
(cherry picked from commit 2fe4ef6699)
2017-03-22 20:25:56 +01:00
Fabio Alessandrelli
43d992fc34 Implement TCP Server bind address
(cherry picked from commit b2839343ca)
2017-03-22 20:25:52 +01:00
Fabio Alessandrelli
603105df18 Convert validity checks of IP_Address to is_valid method.
(cherry picked from commit 98a7e2b4e0)
2017-03-22 20:01:41 +01:00
Fabio Alessandrelli
aeffe74a27 Avoid calling close when polling a UDP peer without socket
(cherry picked from commit e4b9b37ccf)
2017-03-22 20:01:13 +01:00
Fabio Alessandrelli
ccf37c4ca2 TCP connect always opens correct socket type
TCP client connections does not need to rely on ipv6 dual stack sockets

(cherry picked from commit 55b4f3686d)
2017-03-22 15:40:31 +01:00
Rémi Verschelde
f8db8a3faa Bring that Whole New World to the Old Continent too
Applies the clang-format style to the 2.1 branch as done for master in
5dbf1809c6.
2017-03-19 00:36:26 +01:00
Rémi Verschelde
2664549916 Prevent MSVC build issue after clang-format includes reorder 2017-03-18 23:49:09 +01:00
Hein-Pieter van Braam
c67b08300a Add a simple signal handler for SIGCHLD on Unix
This fixes #6631

(cherry picked from commit cff6840ff7)
2017-03-18 20:05:57 +01:00
Fabio Alessandrelli
9c8ecb45f8 Improvements to scons defined WINVER/_WIN32_WINNT
(cherry picked from commit 65483d57bf)
2017-01-12 19:15:30 +01:00
Rémi Verschelde
93a83c81f0 Windows: Workaround missing includes in MinGW-w64 < 4
The MinGW-w64 version we have on our Travis build environment (Ubuntu 12.04,
mingw-w64 2.0.1, gcc 4.6) is old and has some missing includes in the
dependencies of the `tcpmib.h` header [0] [1] [2].
Those were not triggered before 6323779596
probably due to conflicting WINVER definitions which prevented triggering the code
specific to >= 0x0600 (Vista). We ensure it won't be triggered by defining the
_WIN32_WINNT macro to Windows XP compatibility.
(cherry picked from commit b24fe6879a)
2017-01-12 19:15:30 +01:00
Rémi Verschelde
d66740175e Windows: Define _WIN32_WINRT to 0x0600 (Vista)
Passed as a compiler define to be sure it is always define before windows.h
is loaded. This means that Godot officially requires Vista API or later, it will
not work on Windows XP or earlier.

Also fix a bogus check for Windows 7 API.

(cherry picked from commit 6323779596)
2017-01-12 19:15:30 +01:00
Rémi Verschelde
d8223ffa75 Welcome in 2017, dear changelog reader!
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!

(cherry picked from commit c7bc44d5ad)
2017-01-12 19:15:30 +01:00
Fabio Alessandrelli
ac9f0aea1a Remove old unused AI_V4MAPPED flag to getaddrinfo
(cherry picked from commit de23ce11b5)
2017-01-04 00:46:33 +01:00
Fabio Alessandrelli
00fdcf3cd0 IP_Address now handle IPv4 and IPv6 transparently
IP_Address changes:
- Converts to and from String transparently while handling IPv4 as IPv6
  mapped (::ffff:[IP]) address internally.
- Completely remove AddrType enum.
- Setting/Getting of ip array is now only possible through dedicated functions
  (ie. set_ipv4, get_ipv4, set_ipv6, get_ipv6)
- Add function to know if the address is a valid IPv4 (for IP implementation and enet)

(cherry picked from commit 1aff508dd9)
2017-01-04 00:46:33 +01:00
Fabio Alessandrelli
e8a6cbc897 Migrate int.IP_TYPE_ constants to IP.TYPE_
(cherry picked from commit c18c5013f8)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
47ae6c6507 Move V6ONLY flag selection inside helpers
(cherry picked from commit 4d90a4fcd5)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
5e79ac72b7 Automatically map IPv4 address to IPv6 when needed
(cherry picked from commit 9200da58e4)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
a46a643f90 Use an instance variable for ip_type in raw sockets
PacketPeerUDP/StreamPeerTCP/TCP_Server now uses an instance variable
to store the selected ip_type (IPv4/IPv6/ANY, where ANY = dual stack).
All calls to resolve addresses, sending/receving data, connecting/listening
will use that socket type.

(cherry picked from commit 95bdd97768)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
c030e602e5 Properly handle tcp connection failure
(cherry picked from commit 4f07b595a1)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
19b31297ec Fix _set_ip_addr_port not setting the address.
(cherry picked from commit cdc1ca0f13)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
4635671de5 Fix getaddrinfo failing on android
(cherry picked from commit 311f1f165b)
2017-01-04 00:46:32 +01:00
Fabio Alessandrelli
e1dfaaf786 Define IPV6_V6ONLY flag if not defined on windows (old mingw versions)
(cherry picked from commit bdc7ca84ca)
2016-12-11 18:12:46 +01:00
Fabio Alessandrelli
754e9aa60a TCP/UDP Listen sockets can now be set to IPv6 only
(cherry picked from commit eb27e993f0)
2016-12-11 18:12:46 +01:00
Fabio Alessandrelli
70a6791150 Fix windows debugger connection problems.
Unify network socket creation between platform.
Ensure IPV6_V6ONLY flag is not set on sockets (allow IPv4 connection in IPv6 socket, dual-stack).

(cherry picked from commit 812908e236)
2016-12-11 18:12:45 +01:00
Fabio Alessandrelli
6e0de0cce8 TCPServer listen now default to IP type ANY (v6 socket with v4 support)
(cherry picked from commit ee69bd81cf)
2016-12-11 18:12:45 +01:00
Fabio Alessandrelli
04def2161e Fix PacketPeerUDP get_packet_port()
Properly convert port field from network to system ordering on incoming packets.

(cherry picked from commit 25e29972a9)
2016-12-11 18:12:45 +01:00
Fabio Alessandrelli
b3443fd848 Pass correct address size (ipv4,ipv6) to socket connect, bind, sendto
The address size passed to network system calls now reflects the the actual IP type (v4 or v6).
Fix Windows and OSX ipv6 sockets

(cherry picked from commit 80e911647c)
2016-12-11 12:35:06 +01:00
Ariel Manzur
d8b0070b8c added windows support for ipv6, cleaned up unix code
(cherry picked from commit 672225b710)
2016-12-11 12:35:06 +01:00
Ariel Manzur
53fea7f196 fixed some byte order and parsing problems
(cherry picked from commit 1d45f35a4a)
2016-12-11 12:35:06 +01:00
Ariel Manzur
fd1022fd29 adding ipv6
(cherry picked from commit 887a897c02)
2016-12-11 12:35:06 +01:00
eska
6d86a63648 OS additions and fixes for WebAssembly/asm.js
- Implement alert, shell_open, set_window_title
 - Add locale lookup, fixes #2477
 - Print without color control sequences
 - Move get_executable_path implementation to OS_JavaScript
2016-12-03 15:33:32 +01:00
Rémi Verschelde
e259bf8bbb style: Fix PEP8 whitespace issues in Python files
Done with `autopep8 --select=E2,W2`, fixes:

- E201 - Remove extraneous whitespace.
- E202 - Remove extraneous whitespace.
- E203 - Remove extraneous whitespace.
- E211 - Remove extraneous whitespace.
- E221 - Fix extraneous whitespace around keywords.
- E222 - Fix extraneous whitespace around keywords.
- E223 - Fix extraneous whitespace around keywords.
- E224 - Remove extraneous whitespace around operator.
- E225 - Fix missing whitespace around operator.
- E226 - Fix missing whitespace around operator.
- E227 - Fix missing whitespace around operator.
- E228 - Fix missing whitespace around operator.
- E231 - Add missing whitespace.
- E231 - Fix various deprecated code (via lib2to3).
- E241 - Fix extraneous whitespace around keywords.
- E242 - Remove extraneous whitespace around operator.
- E251 - Remove whitespace around parameter '=' sign.
- E261 - Fix spacing after comment hash.
- E262 - Fix spacing after comment hash.
- E265 - Format block comments.
- E271 - Fix extraneous whitespace around keywords.
- E272 - Fix extraneous whitespace around keywords.
- E273 - Fix extraneous whitespace around keywords.
- E274 - Fix extraneous whitespace around keywords.
- W291 - Remove trailing whitespace.
- W293 - Remove trailing whitespace.
2016-11-02 22:28:28 +01:00
Rémi Verschelde
5a49e45d21 SCsub: Add python shebang as a hint for syntax highlighting
Also switch existing shebangs to "better" /usr/bin/env python.

(cherry picked from commit fc8ccd5b8c)
2016-10-30 14:51:34 +01:00
Rémi Verschelde
aa1367595e drivers: Refactor SCsub and drop redundant env_drivers clone
The reordering of the SConscript includes allows to ensure that
stuff like the builtin zlib headers will be available for libpng.

Also moved glew back into global env, otherwise windows seems
not to find it... Kind of shooting in the dark with this multi-env
setup.

(cherry picked from commit 248bc9159c)
2016-10-30 14:51:34 +01:00
Rémi Verschelde
22419082d9 Remove some noisy debug prints
Part of #5031
2016-07-17 18:25:21 +02:00
Juan Linietsky
f9bd038ca7 Removed no longer needed check 2016-07-02 13:32:07 -03:00
Juan Linietsky
ffbc2e56c9 Fix some bugs in diraccess, closes #5288 2016-06-30 18:23:39 -03:00
Juan Linietsky
8dac3bf3b1 Added function to notify ScriptLanguage when a thread is created/freed, allows scripts to allocate a stack there via TLS 2016-06-25 10:41:23 -03:00
Daniel J. Ramirez
422fac5066 Removed lots of prints 2016-06-18 18:01:06 -05:00
Juan Linietsky
e3905a084e -made get_space_left() return values more homogenous, also for script, converted to mb, closes #4617 2016-06-18 11:32:45 -03:00
Juan Linietsky
61655d6dc2 Fixed make_dir and make_dir_recursive erros, closes #1680 closes #1872 2016-06-18 11:13:03 -03:00
Rémi Verschelde
a7fc04626a Add missing license headers in our source files (#5255)
Also removes a couple wrong Godot headers from third-party source files.
2016-06-18 14:46:12 +02:00
Juan Linietsky
7f02627290 -Add visible IO errors when closing a file fails due to it being locked (most likely on windows), closes #4760 2016-06-13 10:10:50 -03:00
volzhs
9073dc9963 change invalid characters when get user data dir on Windows & Unix
Can't create user data folder when project name has ``\ / : * ? " < > |`` characters on OS_Windows & OS_Unix.
So, change it to ``-`` to be able to make folder.

fixes #4928 and it's altanative to #4986.
2016-06-03 03:39:37 +09:00