Also allow lifting the decimal step formatting with a hint range step
of 0. A new `range_step_decimals()` is added for this to avoid breaking
compatibility on the general purpose `step_decimals()` (which still
returns 0 for an input step of 0).
Supersedes #25470.
Partial fix for #18251.
**Important:** This does not mean *yet* that C++11 features should be used
in contributions to Godot's codebase.
For now this change is done solely for feature branches working on Vulkan
support and GDScript typed instruction sets for Godot 4.0, which will both
use C++11 features and are based on the master branch.
The plan is to start porting the codebase to C++11 after Godot 3.2 is
released, following upcoming guidelines on the subset of new features that
should be used, and when/how to use them.
We will advertise clearly when C++11 contributions are open, especially
once we start a coordinated effort to port Godot's massive codebase. In the
meantime, please bear with us and good ol' C++03. :)
Also added support for SCons project-absolute paths (starting with #) and
warning about duplicates in add_source_files(), and fixed
default_controller_mappings.gen.cpp being included twice after first build
due to *.cpp globbing.
Part of #30270.
If both the core and editor API assemblies are missing or out of sync, Godot will only update the former and then abort when trying to load them again because the latter was not updated. Godot will update it correctly the next time it's started, but this should not be needed and it should work the first time. This commit fixes that.
Properly release added resource loader and save references. Otherwise PluginScript API
may cause "ObjectDB Instances still exist!" warnings and segmentation faults on exit.
"posmod" is the integer version of "fposmod". We do not need a "mod" because of the % operator.
I changed the default arg names from "x" and "y" to "a" and "b" because they are not coordinates. I also changed pow's arg names to "base" and "exp". Also, I reorganized the code in the VS built-in funcs switch statement.
Color table should exist for images with bit count <= 8. Importing 16-bit
BMP images could also likely have a color table but they're not currently
supported in Godot.
Remove the old API assembly invalidation system. It's pretty simple since now the editor has a hard dependency on the API assemblies and SCons takes care of prebuilding them.
If we fail to load a project's API assembly because it was either missing or outdated, we just copy the prebuilt assemblies to the project and try again. We also do this when creating the solution and before building, just in case the user removed them from the disk after they were loaded.
This way the API assemblies will be always loaded successfully. If they are not, it's a bug.
Also fixed:
- EditorDef was behaving like GlobalDef in GodotTools.
- NullReferenceException because we can't serialize System.WeakReference yet. Use Godot.WeakRef in the mean time.
We need to dispose the GodotSharpExport export plugin before the editor destroys EditorSettings. Otherwise, if the GC disposes it at a later time, EditorExportPlatformAndroid will be freed after EditorSettings already was, and its device polling thread will try to access the EditorSettings singleton, resulting in null dereferencing.
Also added an option to output a json file with all the ClassDB registered classes and its members. This can be used to compare the API of two different builds by a simple diff.
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
ptrcall assumes methods that return a Reference type do so with Ref<T>. Returning Reference* from a method exposed to the scripting API completely breaks ptrcalls to this method (it can be quite hard to debug!).
Make the build system automatically build the C# Api assemblies to be shipped with the editor.
Make the editor, editor player and debug export templates use Api assemblies built with debug symbols.
Always run MSBuild to build the editor tools and Api assemblies when building Godot.
Several bugs fixed related to assembly hot reloading and restoring state.
Fix StringExtensions internal calls not being registered correctly, resulting in MissingMethodException.
The gizmo colors now depend on the operation. Subtraction will
result in an inverted gizmo color, whereas intersection is now displayed
as white.
A solid translucent overlay is now drawn over a selected node
to make it easier to distinguish.
Both client and server are supported on native builds (as usual).
SSL server is still not supported, but will soon be possible with this
new library.
The API stays the same, we just need to work out potential issues due to
this big library switch.
That is, any library referred to in GDNative library resources, won't be copied to the export target path unless its path begins with `res://`.
The case use for this is a bit advanced: having a GDN library that will be deployed separately from the project; for instance, to a path in the system (like `/opt/...`).
Currently the GDN library editor doesn't allow to pick dynamic libraries outside the project, but that can be done by editing the `.gdnlib` file manually.
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
Godot core needs MD5/SHA256/AES/Base64 which used to be provided by
separate libraries.
Since we bundle mbedtls in most cases, and we can easily only include
the needed sources if we so desire, let's use it.
To simplify library changes in the future, and better isolate header
dependencies all functions have been wrapped around inside a class in
`core/math/crypto_base.h`.
If the mbedtls module is disabled, we only bundle the needed source
files independently of the `builtin_mbedtls` option.
If the module is enabled, the `builtin_mbedtls` option works as usual.
Also remove some unused headers from StreamPeerMbedTLS which were
causing build issues.
This PR introduces support for ARKit to the iOS version of Godot.
ARKit is Apples Augmented Reality platform.
This PR brings in support for ARKit 1.0 and implements a few ARKit 2.0 features.
It requires iOS 11 to run but should not prevent Godot from running on older versions as long as ARKit remains unused.
The functionality is similar to how `doc_classes` are retrieved per module.
The build system will search for custom icons path defined per module via
`get_icons_path()` method in `config.py` or default icons path.
If such paths don't exist, only the editor's own icons will be built.
Most module icons were moved from editor/icons to respective modules.
- Document a few more properties and methods
- Add more information to many classes
- Fix lots of typos and gramar mistakes
- Use [code] tags for parameters consistently
- Use [b] and [i] tags consistently
- Put "Warning:" and "Note:" on their own line to be more visible,
and make them always bold
- Tweak formatting in code examples to be more readable
- Use double quotes consistently
- Add more links to third-party technologies
I have added a small code sample to show how to automate the process of port forwarding (and closing after you are done).
Thanks to @mhilbrunner for explaining how to achieve t0his (see #18780)
ResourceFormatLoader and ResourceFormatSaver are meant to be overridden
to add support for different formats in ResourceLoader and ResourceSaver.
Those should be exposed as they can be overridden in plugins.
On the other hand, all predefined subclasses of those two base classes
are only meant to register support for new file and resource types, but
should not and cannot be used directly from script, so they should not
be exposed.
Also unexposed ResourceImporterOGGVorbis (and thus its base class
ResourceImporter) which are editor-only.
Warnings raised by Emscripten 1.38.0 and MinGW64 5.0.4 / GCC 8.3.0.
JS can now build with `werror=yes warnings=extra`.
MinGW64 still has a few warnings to resolve with `warnings=extra`,
and only one with `warnings=all`.
Part of #29033 and #29801.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
This updates our local copy to commit 5ec8339b6fc491e3f09a34a4516e82787f053fcc.
We need a recent master commit for some new features that we use in Godot
(see #25543 and #28909).
To avoid warnings generated by Bullet headers included in our own module,
we include those headers with -isystem on GCC and Clang.
Fixes#29503.
This has already been fixed in Mono both master and 2019-06 (no other branch other than the skipped 2019-04 branch uses pthread_mutexattr_setprotocol).
This adds constants to projects build via Godot Mono which allows project to conditionally react to different operating systems and 32/64 Bit architecture. Additionally .NET libraries could support multiple engines like Unity and Godot at the same time when compiled from Godot and reacting to definitions.
* Expose EditorNavigationMeshGenerator as an engine singleton so users
can generate navmesehes from `tool` scripts.
* Add support for generating navmeshes from static colliders. All
collision shapes are supported except for Plane (since Plane is an
infinite collider and navmeshes need to have finite geometry).
* When using static colliders as a geometry source, a layer mask can be
specified to ignore certain colliders.
* Don't rely on global transform. It still should give the exact same
results but allows for building navmeshes on nodes that are not in the
tree (useful in `tool` scripts).
* Update navigation gizmos after every new bake.
This work has been kindly sponsored by IMVU.
A big refactor to the WebRTC module. API is now considered quite stable.
Highlights:
- Renamed `WebRTCPeer` to `WebRTCPeerConnection`.
- `WebRTCPeerConnection` no longer act as `PacketPeer`, it only handle the connection itself (a bit like `TCP_Server`)
- Added new `WebRTCDataChannel` class which inherits from `PacketPeer` to handle data transfer.
- Add `WebRTCPeerConnection.initialize` method to create a new connection with the desired configuration provided as dictionary ([see MDN docs](https://developer.mozilla.org/en-US/docs/Web/API/RTCPeerConnection/RTCPeerConnection#RTCConfiguration_dictionary)).
- Add `WebRTCPeerConnection.create_data_channel` method to create a data channel for the given connection. The connection must be in `STATE_NEW` as specified by the standard ([see MDN docs for options](https://developer.mozilla.org/en-US/docs/Web/API/RTCPeerConnection/createDataChannel#RTCDataChannelInit_dictionary)).
- Add a `data_channel_received` signal to `WebRTCPeerConnection` for in-band (not negotiated) channels.
- Renamed `WebRTCPeerConnection` `offer_created` signal to `session_description_created`.
- Renamed `WebRTCPeerConnection` `new_ice_candidate` signal to `ice_candidate_created`
binding_functions.size() and an instance's binding_data.size() can get out of sync. They sync up when an instance's bindings are requested. When binding functions are registered after creating an instance's bindings, the instance's bindings are out of sync until requested again. If they're never requested, they're never synced.
unregister_binding_functions indexes into binding_data, but only checks that its safe to index into binding_functions. When they're out of sync, indexing fails.
This revision checks that it's safe to index into binding_data.
Moved GDNative singletons discoverer from register_types to
GDNativeSingletonEditor.
Fix enable/disable switch in GDNativeLibrarySingletonEditor.
Separate `gdnative/singletons` and `gdnative/singletons_disabled`
project settings, keeping "on by default" behavior.
This prevents GDScript functions from leaving the stack too soon when
they are resuming from yield, allowing the ones expecting it to finish
to know the caller.
Helps debugging cases when you use:
`yield(function_which_yields(), "completed")`
since now it shows the call that resumed that function.
Store general properties in ConfigFile too when modifying them.
Additionally set config_file property as internal as it's not editable
from inspector. It also does not appear to get saved in a meaningful way
(saved as Object(ConfigFile, ...))
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
Previously only RGBH formatted images were compressed to BC6H, this change
enables BC6H compression also for the RH, RGH, and RGBE9995 formats, allowing
1:2, 1:4, and 1:4 size reduction for them, respectively.
This is in particular important for HDRI images which usually come in RGBE9995
format.
solves #26796
- ADD `String to_string()` method to Object which can be overriden by `String _to_string()` in scripts
- ADD `String to_string(r_valid)` method to ScriptInstance to allow langauges to control how scripted objects are converted to strings
- IMPLEMENT to_string for GDScriptInstance, VisualScriptInstance, and NativeScriptInstance
- ADD Documentation about `Object.to_string` and `Object._to_string`
- Changed `Variant::operator String` to use `obj->to_string()`
Fix freetype build issue for javascript platform.
When disabling optimizations (SMID) in specific freetype, source files,
we need to make sure to copy all other CPPFLAGS, not just override them.
This change fixes a few outstanding issues and greatly improves the usability
of the GridMap editor through the following changes:
- Copied mesh now gets displayed during pasting (also renamed the related
identifiers accordingly)
- Duplication/paste indicator now gets rotated around the correct pivot point
(duplication worked properly before, but the indicator was shown misplaced
when rotated)
- Selected mesh library item cursor is no longer shown during selection and
duplication/pasting
- Back rotate X/Y/Z is now working during duplication/pasting
- Added true cut operation thanks to now having a proper clipboard (clear
operation got remapped to the DEL key)
- Got rid of some weird workarounds in the duplication code
- Fill and clear operations now correctly make the selection marker inactive
as this was broken partly due to the workarounds mentioned above
(duplication continues to keep the selection marker active to allow
subsequent duplications)
- Clear current selection on RMB, but treat selection as an action so previous
selection can be restored on undo
- Separated selection and paste indicator data as it's prone to error and
confusion and it's anyway needed now that selection is treated as an action
- Added support for cancelling paste, selection, and even unselect the
currently selected mesh library item with the ESC key (previously there
wasn't a way to unselect)
- Changed the key binding of fill/clear/duplicate operations to use Ctrl as a
modifier
- Changed erase to use RMB instead of Shift+RMB (free look is available
through Shift+F anyway, so no need to occupy RMB for it during gridmap
editing)
- Removed unused area, external connector, and configure menu items (there's
also the non-functional clip mode menu items, but I'm not sure whether there
are any plans with that, I suppose it's meant to be an editor aid)
- Renamed INPUT_COPY to INPUT_PICK to better reflect its purpose
- Added support for using Shift+Q and Shift+E to select multiple floors/planes
without actually changing the current floor/plane as it happens when using
e.g. the mouse wheel
Fixes#25373 and #15883
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
- Only load the scripts metadata file when it's really needed. This way we avoid false errors, when there is no C# project, about missing scripts metadata file.
- Methods that act as accessors for properties in the same class (like `GetPosition` and `SetPosition` are for `Position`) are now marked as obsolete. They will be made private in the future.
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
Add some sanity checks according to bmp specification.
Read color table and index data within the same scope and
then simply extend the color palette.
This particular implementation has one limitation: not all 4/1 bit images
can be imported as it requires bit unpacking (size dimensions must be
a multiple of 8 for 1-bit and 2 (even) for 4-bit images).
- The default log level in debug builds is now 'info' instead of 'debug'.
- Add option to specify a different log level with the 'GODOT_MONO_LOG_LEVEL' environment variable.
- The name of log files is now a readable date and time.
- Always print the log file path (previously it was printed only it in verbose mode).
I left the material on CSGMesh because GeometryInstance's material override prevents the normal material behaviour of the csg meshes
but the material_override is useful, and now you can control the shadow, lod and other properties you get from GeometryInstance
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Added constructor that takes IEnumerable for Array and IEnumerable<T> for Array<T>.
Added constructor that takes IDictionary for Dictionary and IDictionary<TKey, TValue> for Dictionary<TKey, TValue>.
FBX support and MMD (pmx) support.
Normals, Albedo, Metallic, and Roughness through Arnold 5 Materials for Maya FBX.
Maya FBX Stingray PBS support.
Importing FBX static meshes work.
Importing FBX animations is a work in progress.
Supports FBX 4 bone influence animations.
Supports FBX blend shapes.
MMDs do not have an associated animation import yet.
Sponsored by IMVU Inc.
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
The first 'if' always evaluated to true, as it evaluated values which are the default
ones for Android and iOS respectively, so even if one of them was overridden, the other
one would be true.
Fixes#27658.
Network peers get_var/put_var
File get_var/store_var
GDScript/Mono/VisualScript bytes2var/var2bytes
Add MultiplayerAPI.allow_object_decoding member which deprecates PacketPeer.allow_object_decoding.
Break ABI compatibaility (API compatibility for GDNative).
Enum reference resolving will now search in the @GlobalScope if no class is specified and the enum cannot be resolved in the current class.
Added support for constant references in EditorHelp, e.g.: [constant KEY_ENTER] or [constant Control.FOCUS_CLICK]. It supports enum constants (the enum name must not be included).
Expands to Object.call, Object.set and Object.get for accessing members. This means it can also access members from scripts written in other languages, like GDScript.
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
