Real-time global illumination (GI) probe. [GIProbe]s are used to provide high-quality real-time indirect light to scenes. They precompute the effect of objects that emit light and the effect of static geometry to simulate the behavior of complex light in real-time. [GIProbe]s need to be baked before using, however, once baked, dynamic objects will receive light from them. Further, lights can be fully dynamic or baked. Having [GIProbe]s in a scene can be expensive, the quality of the probe can be turned down in exchange for better performance in the [ProjectSettings] using [member ProjectSettings.rendering/quality/voxel_cone_tracing/high_quality]. [b]Note:[/b] Meshes should have sufficiently thick walls to avoid light leaks (avoid one-sided walls). For interior levels, enclose your level geometry in a sufficiently large box and bridge the loops to close the mesh. [b]Note:[/b] Due to a renderer limitation, emissive [ShaderMaterial]s cannot emit light when used in a [GIProbe]. Only emissive [SpatialMaterial]s can emit light in a [GIProbe]. https://docs.godotengine.org/en/3.3/tutorials/3d/gi_probes.html https://godotengine.org/asset-library/asset/678 Bakes the effect from all [GeometryInstance]s marked with [member GeometryInstance.use_in_baked_light] and [Light]s marked with either [constant Light.BAKE_INDIRECT] or [constant Light.BAKE_ALL]. If [code]create_visual_debug[/code] is [code]true[/code], after baking the light, this will generate a [MultiMesh] that has a cube representing each solid cell with each cube colored to the cell's albedo color. This can be used to visualize the [GIProbe]'s data and debug any issues that may be occurring. Calls [method bake] with [code]create_visual_debug[/code] enabled. Offsets the lookup of the light contribution from the [GIProbe]. This can be used to avoid self-shadowing, but may introduce light leaking at higher values. This and [member normal_bias] should be played around with to minimize self-shadowing and light leaking. [b]Note:[/b] [code]bias[/code] should usually be above 1.0 as that is the size of the voxels. [i]Deprecated.[/i] This property has been deprecated due to known bugs and no longer has any effect when enabled. The [GIProbeData] resource that holds the data for this [GIProbe]. The maximum brightness that the [GIProbe] will recognize. Brightness will be scaled within this range. Energy multiplier. Makes the lighting contribution from the [GIProbe] brighter. The size of the area covered by the [GIProbe]. If you make the extents larger without increasing the subdivisions with [member subdiv], the size of each cell will increase and result in lower detailed lighting. If [code]true[/code], ignores the sky contribution when calculating lighting. Offsets the lookup into the [GIProbe] based on the object's normal direction. Can be used to reduce some self-shadowing artifacts. How much light propagates through the probe internally. A higher value allows light to spread further. Number of times to subdivide the grid that the [GIProbe] operates on. A higher number results in finer detail and thus higher visual quality, while lower numbers result in better performance. Use 64 subdivisions. This is the lowest quality setting, but the fastest. Use it if you can, but especially use it on lower-end hardware. Use 128 subdivisions. This is the default quality setting. Use 256 subdivisions. Use 512 subdivisions. This is the highest quality setting, but the slowest. On lower-end hardware this could cause the GPU to stall. Represents the size of the [enum Subdiv] enum.