<?xml version="1.0" encoding="UTF-8" ?> <class name="Generic6DOFJoint" inherits="Joint" category="Core" version="3.1"> <brief_description> The generic 6 degrees of freedom joint can implement a variety of joint-types by locking certain axes' rotation or translation. </brief_description> <description> The first 3 DOF axes are linear axes, which represent translation of Bodies, and the latter 3 DOF axes represent the angular motion. Each axis can be either locked, or limited. </description> <tutorials> </tutorials> <demos> </demos> <methods> </methods> <members> <member name="angular_limit_x/damping" type="float" setter="set_param_x" getter="get_param_x"> The amount of rotational damping across the x-axis. The lower, the longer an impulse from one side takes to travel to the other side. </member> <member name="angular_limit_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x"> If [code]true[/code] rotation across the x-axis is limited. </member> <member name="angular_limit_x/erp" type="float" setter="set_param_x" getter="get_param_x"> When rotating across x-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower. </member> <member name="angular_limit_x/force_limit" type="float" setter="set_param_x" getter="get_param_x"> The maximum amount of force that can occur, when rotating around x-axis. </member> <member name="angular_limit_x/lower_angle" type="float" setter="_set_angular_lo_limit_x" getter="_get_angular_lo_limit_x"> The minimum rotation in negative direction to break loose and rotate around the x-axis. </member> <member name="angular_limit_x/restitution" type="float" setter="set_param_x" getter="get_param_x"> The amount of rotational restitution across the x-axis. The lower, the more restitution occurs. </member> <member name="angular_limit_x/softness" type="float" setter="set_param_x" getter="get_param_x"> The speed of all rotations across the x-axis. </member> <member name="angular_limit_x/upper_angle" type="float" setter="_set_angular_hi_limit_x" getter="_get_angular_hi_limit_x"> The minimum rotation in positive direction to break loose and rotate around the x-axis. </member> <member name="angular_limit_y/damping" type="float" setter="set_param_y" getter="get_param_y"> The amount of rotational damping across the y-axis. The lower, the more dampening occurs. </member> <member name="angular_limit_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y"> If [code]true[/code] rotation across the y-axis is limited. </member> <member name="angular_limit_y/erp" type="float" setter="set_param_y" getter="get_param_y"> When rotating across y-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower. </member> <member name="angular_limit_y/force_limit" type="float" setter="set_param_y" getter="get_param_y"> The maximum amount of force that can occur, when rotating around y-axis. </member> <member name="angular_limit_y/lower_angle" type="float" setter="_set_angular_lo_limit_y" getter="_get_angular_lo_limit_y"> The minimum rotation in negative direction to break loose and rotate around the y-axis. </member> <member name="angular_limit_y/restitution" type="float" setter="set_param_y" getter="get_param_y"> The amount of rotational restitution across the y-axis. The lower, the more restitution occurs. </member> <member name="angular_limit_y/softness" type="float" setter="set_param_y" getter="get_param_y"> The speed of all rotations across the y-axis. </member> <member name="angular_limit_y/upper_angle" type="float" setter="_set_angular_hi_limit_y" getter="_get_angular_hi_limit_y"> The minimum rotation in positive direction to break loose and rotate around the y-axis. </member> <member name="angular_limit_z/damping" type="float" setter="set_param_z" getter="get_param_z"> The amount of rotational damping across the z-axis. The lower, the more dampening occurs. </member> <member name="angular_limit_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z"> If [code]true[/code] rotation across the z-axis is limited. </member> <member name="angular_limit_z/erp" type="float" setter="set_param_z" getter="get_param_z"> When rotating across z-axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower. </member> <member name="angular_limit_z/force_limit" type="float" setter="set_param_z" getter="get_param_z"> The maximum amount of force that can occur, when rotating around z-axis. </member> <member name="angular_limit_z/lower_angle" type="float" setter="_set_angular_lo_limit_z" getter="_get_angular_lo_limit_z"> The minimum rotation in negative direction to break loose and rotate around the z-axis. </member> <member name="angular_limit_z/restitution" type="float" setter="set_param_z" getter="get_param_z"> The amount of rotational restitution across the z-axis. The lower, the more restitution occurs. </member> <member name="angular_limit_z/softness" type="float" setter="set_param_z" getter="get_param_z"> The speed of all rotations across the z-axis. </member> <member name="angular_limit_z/upper_angle" type="float" setter="_set_angular_hi_limit_z" getter="_get_angular_hi_limit_z"> The minimum rotation in positive direction to break loose and rotate around the z-axis. </member> <member name="angular_motor_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x"> If [code]true[/code] a rotating motor at the x-axis is enabled. </member> <member name="angular_motor_x/force_limit" type="float" setter="set_param_x" getter="get_param_x"> Maximum acceleration for the motor at the x-axis. </member> <member name="angular_motor_x/target_velocity" type="float" setter="set_param_x" getter="get_param_x"> Target speed for the motor at the x-axis. </member> <member name="angular_motor_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y"> If [code]true[/code] a rotating motor at the y-axis is enabled. </member> <member name="angular_motor_y/force_limit" type="float" setter="set_param_y" getter="get_param_y"> Maximum acceleration for the motor at the y-axis. </member> <member name="angular_motor_y/target_velocity" type="float" setter="set_param_y" getter="get_param_y"> Target speed for the motor at the y-axis. </member> <member name="angular_motor_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z"> If [code]true[/code] a rotating motor at the z-axis is enabled. </member> <member name="angular_motor_z/force_limit" type="float" setter="set_param_z" getter="get_param_z"> Maximum acceleration for the motor at the z-axis. </member> <member name="angular_motor_z/target_velocity" type="float" setter="set_param_z" getter="get_param_z"> Target speed for the motor at the z-axis. </member> <member name="linear_limit_x/damping" type="float" setter="set_param_x" getter="get_param_x"> The amount of damping that happens at the x-motion. </member> <member name="linear_limit_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x"> If [code]true[/code] the linear motion across the x-axis is limited. </member> <member name="linear_limit_x/lower_distance" type="float" setter="set_param_x" getter="get_param_x"> The minimum difference between the pivot points' x-axis. </member> <member name="linear_limit_x/restitution" type="float" setter="set_param_x" getter="get_param_x"> The amount of restitution on the x-axis movement The lower, the more momentum gets lost. </member> <member name="linear_limit_x/softness" type="float" setter="set_param_x" getter="get_param_x"> A factor applied to the movement across the x-axis The lower, the slower the movement. </member> <member name="linear_limit_x/upper_distance" type="float" setter="set_param_x" getter="get_param_x"> The maximum difference between the pivot points' x-axis. </member> <member name="linear_limit_y/damping" type="float" setter="set_param_y" getter="get_param_y"> The amount of damping that happens at the y-motion. </member> <member name="linear_limit_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y"> If [code]true[/code] the linear motion across the y-axis is limited. </member> <member name="linear_limit_y/lower_distance" type="float" setter="set_param_y" getter="get_param_y"> The minimum difference between the pivot points' y-axis. </member> <member name="linear_limit_y/restitution" type="float" setter="set_param_y" getter="get_param_y"> The amount of restitution on the y-axis movement The lower, the more momentum gets lost. </member> <member name="linear_limit_y/softness" type="float" setter="set_param_y" getter="get_param_y"> A factor applied to the movement across the y-axis The lower, the slower the movement. </member> <member name="linear_limit_y/upper_distance" type="float" setter="set_param_y" getter="get_param_y"> The maximum difference between the pivot points' y-axis. </member> <member name="linear_limit_z/damping" type="float" setter="set_param_z" getter="get_param_z"> The amount of damping that happens at the z-motion. </member> <member name="linear_limit_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z"> If [code]true[/code] the linear motion across the z-axis is limited. </member> <member name="linear_limit_z/lower_distance" type="float" setter="set_param_z" getter="get_param_z"> The minimum difference between the pivot points' z-axis. </member> <member name="linear_limit_z/restitution" type="float" setter="set_param_z" getter="get_param_z"> The amount of restitution on the z-axis movement The lower, the more momentum gets lost. </member> <member name="linear_limit_z/softness" type="float" setter="set_param_z" getter="get_param_z"> A factor applied to the movement across the z-axis The lower, the slower the movement. </member> <member name="linear_limit_z/upper_distance" type="float" setter="set_param_z" getter="get_param_z"> The maximum difference between the pivot points' z-axis. </member> <member name="linear_motor_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x"> If [code]true[/code] then there is a linear motor on the x-axis. It will attempt to reach the target velocity while staying within the force limits. </member> <member name="linear_motor_x/force_limit" type="float" setter="set_param_x" getter="get_param_x"> The maximum force the linear motor can apply on the x-axis while trying to reach the target velocity. </member> <member name="linear_motor_x/target_velocity" type="float" setter="set_param_x" getter="get_param_x"> The speed that the linear motor will attempt to reach on the x-axis. </member> <member name="linear_motor_y/enabled" type="bool" setter="set_flag_y" getter="get_flag_y"> If [code]true[/code] then there is a linear motor on the y-axis. It will attempt to reach the target velocity while staying within the force limits. </member> <member name="linear_motor_y/force_limit" type="float" setter="set_param_y" getter="get_param_y"> The maximum force the linear motor can apply on the y-axis while trying to reach the target velocity. </member> <member name="linear_motor_y/target_velocity" type="float" setter="set_param_y" getter="get_param_y"> The speed that the linear motor will attempt to reach on the y-axis. </member> <member name="linear_motor_z/enabled" type="bool" setter="set_flag_z" getter="get_flag_z"> If [code]true[/code] then there is a linear motor on the z-axis. It will attempt to reach the target velocity while staying within the force limits. </member> <member name="linear_motor_z/force_limit" type="float" setter="set_param_z" getter="get_param_z"> The maximum force the linear motor can apply on the z-axis while trying to reach the target velocity. </member> <member name="linear_motor_z/target_velocity" type="float" setter="set_param_z" getter="get_param_z"> The speed that the linear motor will attempt to reach on the z-axis. </member> </members> <constants> <constant name="PARAM_LINEAR_LOWER_LIMIT" value="0" enum="Param"> The minimum difference between the pivot points' axes. </constant> <constant name="PARAM_LINEAR_UPPER_LIMIT" value="1" enum="Param"> The maximum difference between the pivot points' axes. </constant> <constant name="PARAM_LINEAR_LIMIT_SOFTNESS" value="2" enum="Param"> A factor applied to the movement across the axes The lower, the slower the movement. </constant> <constant name="PARAM_LINEAR_RESTITUTION" value="3" enum="Param"> The amount of restitution on the axes movement The lower, the more momentum gets lost. </constant> <constant name="PARAM_LINEAR_DAMPING" value="4" enum="Param"> The amount of damping that happens at the linear motion across the axes. </constant> <constant name="PARAM_LINEAR_MOTOR_TARGET_VELOCITY" value="5" enum="Param"> The velocity the linear motor will try to reach. </constant> <constant name="PARAM_LINEAR_MOTOR_FORCE_LIMIT" value="6" enum="Param"> The maximum force the linear motor will apply while trying to reach the velocity target. </constant> <constant name="PARAM_ANGULAR_LOWER_LIMIT" value="7" enum="Param"> The minimum rotation in negative direction to break loose and rotate around the axes. </constant> <constant name="PARAM_ANGULAR_UPPER_LIMIT" value="8" enum="Param"> The minimum rotation in positive direction to break loose and rotate around the axes. </constant> <constant name="PARAM_ANGULAR_LIMIT_SOFTNESS" value="9" enum="Param"> The speed of all rotations across the axes. </constant> <constant name="PARAM_ANGULAR_DAMPING" value="10" enum="Param"> The amount of rotational damping across the axes. The lower, the more dampening occurs. </constant> <constant name="PARAM_ANGULAR_RESTITUTION" value="11" enum="Param"> The amount of rotational restitution across the axes. The lower, the more restitution occurs. </constant> <constant name="PARAM_ANGULAR_FORCE_LIMIT" value="12" enum="Param"> The maximum amount of force that can occur, when rotating around the axes. </constant> <constant name="PARAM_ANGULAR_ERP" value="13" enum="Param"> When rotating across the axes, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower. </constant> <constant name="PARAM_ANGULAR_MOTOR_TARGET_VELOCITY" value="14" enum="Param"> Target speed for the motor at the axes. </constant> <constant name="PARAM_ANGULAR_MOTOR_FORCE_LIMIT" value="15" enum="Param"> Maximum acceleration for the motor at the axes. </constant> <constant name="PARAM_MAX" value="16" enum="Param"> End flag of PARAM_* constants, used internally. </constant> <constant name="FLAG_ENABLE_LINEAR_LIMIT" value="0" enum="Flag"> If [code]set[/code] there is linear motion possible within the given limits. </constant> <constant name="FLAG_ENABLE_ANGULAR_LIMIT" value="1" enum="Flag"> If [code]set[/code] there is rotational motion possible. </constant> <constant name="FLAG_ENABLE_MOTOR" value="2" enum="Flag"> If [code]set[/code] there is a rotational motor across these axes. </constant> <constant name="FLAG_ENABLE_LINEAR_MOTOR" value="3" enum="Flag"> </constant> <constant name="FLAG_MAX" value="4" enum="Flag"> End flag of FLAG_* constants, used internally. </constant> </constants> </class>