asgardius/virtualx-engine
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
virtualx-engine/drivers/builtin_openssl2/crypto/modes/asm/ghash-ia64.pl
Juan Linietsky 678948068b Small Issues & Maintenance 
-=-=-=-=-=-=-=-=-=-=-=-=-=

-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes
2014-08-01 22:10:38 -03:00

463 lines
18 KiB
Raku
Executable file
Raw Blame History

#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# March 2010
#
# The module implements "4-bit" GCM GHASH function and underlying
# single multiplication operation in GF(2^128). "4-bit" means that it
# uses 256 bytes per-key table [+128 bytes shared table]. Streamed
# GHASH performance was measured to be 6.67 cycles per processed byte
# on Itanium 2, which is >90% better than Microsoft compiler generated
# code. To anchor to something else sha1-ia64.pl module processes one
# byte in 5.7 cycles. On Itanium GHASH should run at ~8.5 cycles per
# byte.
# September 2010
#
# It was originally thought that it makes lesser sense to implement
# "528B" variant on Itanium 2 for following reason. Because number of
# functional units is naturally limited, it appeared impossible to
# implement "528B" loop in 4 cycles, only in 5. This would mean that
# theoretically performance improvement couldn't be more than 20%.
# But occasionally you prove yourself wrong:-) I figured out a way to
# fold couple of instructions and having freed yet another instruction
# slot by unrolling the loop... Resulting performance is 4.45 cycles
# per processed byte and 50% better than "256B" version. On original
# Itanium performance should remain the same as the "256B" version,
# i.e. ~8.5 cycles.
$output=shift and (open STDOUT,">$output" or die "can't open $output: $!");
if ($^O eq "hpux") {
$ADDP="addp4";
for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); }
} else { $ADDP="add"; }
for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/);
$big_endian=0 if (/\-DL_ENDIAN/); }
if (!defined($big_endian))
{ $big_endian=(unpack('L',pack('N',1))==1); }
sub loop() {
my $label=shift;
my ($p16,$p17)=(shift)?("p63","p63"):("p16","p17"); # mask references to inp
# Loop is scheduled for 6 ticks on Itanium 2 and 8 on Itanium, i.e.
# in scalable manner;-) Naturally assuming data in L1 cache...
# Special note about 'dep' instruction, which is used to construct
# &rem_4bit[Zlo&0xf]. It works, because rem_4bit is aligned at 128
# bytes boundary and lower 7 bits of its address are guaranteed to
# be zero.
$code.=<<___;
$label:
{ .mfi; (p18) ld8 Hlo=[Hi[1]],-8
(p19) dep rem=Zlo,rem_4bitp,3,4 }
{ .mfi; (p19) xor Zhi=Zhi,Hhi
($p17) xor xi[1]=xi[1],in[1] };;
{ .mfi; (p18) ld8 Hhi=[Hi[1]]
(p19) shrp Zlo=Zhi,Zlo,4 }
{ .mfi; (p19) ld8 rem=[rem]
(p18) and Hi[1]=mask0xf0,xi[2] };;
{ .mmi; ($p16) ld1 in[0]=[inp],-1
(p18) xor Zlo=Zlo,Hlo
(p19) shr.u Zhi=Zhi,4 }
{ .mib; (p19) xor Hhi=Hhi,rem
(p18) add Hi[1]=Htbl,Hi[1] };;
{ .mfi; (p18) ld8 Hlo=[Hi[1]],-8
(p18) dep rem=Zlo,rem_4bitp,3,4 }
{ .mfi; (p17) shladd Hi[0]=xi[1],4,r0
(p18) xor Zhi=Zhi,Hhi };;
{ .mfi; (p18) ld8 Hhi=[Hi[1]]
(p18) shrp Zlo=Zhi,Zlo,4 }
{ .mfi; (p18) ld8 rem=[rem]
(p17) and Hi[0]=mask0xf0,Hi[0] };;
{ .mmi; (p16) ld1 xi[0]=[Xi],-1
(p18) xor Zlo=Zlo,Hlo
(p18) shr.u Zhi=Zhi,4 }
{ .mib; (p18) xor Hhi=Hhi,rem
(p17) add Hi[0]=Htbl,Hi[0]
br.ctop.sptk $label };;
___
}
$code=<<___;
.explicit
.text
prevfs=r2; prevlc=r3; prevpr=r8;
mask0xf0=r21;
rem=r22; rem_4bitp=r23;
Xi=r24; Htbl=r25;
inp=r26; end=r27;
Hhi=r28; Hlo=r29;
Zhi=r30; Zlo=r31;
.align 128
.skip 16 // aligns loop body
.global gcm_gmult_4bit#
.proc gcm_gmult_4bit#
gcm_gmult_4bit:
.prologue
{ .mmi; .save ar.pfs,prevfs
alloc prevfs=ar.pfs,2,6,0,8
$ADDP Xi=15,in0 // &Xi[15]
mov rem_4bitp=ip }
{ .mii; $ADDP Htbl=8,in1 // &Htbl[0].lo
.save ar.lc,prevlc
mov prevlc=ar.lc
.save pr,prevpr
mov prevpr=pr };;
.body
.rotr in[3],xi[3],Hi[2]
{ .mib; ld1 xi[2]=[Xi],-1 // Xi[15]
mov mask0xf0=0xf0
brp.loop.imp .Loop1,.Lend1-16};;
{ .mmi; ld1 xi[1]=[Xi],-1 // Xi[14]
};;
{ .mii; shladd Hi[1]=xi[2],4,r0
mov pr.rot=0x7<<16
mov ar.lc=13 };;
{ .mii; and Hi[1]=mask0xf0,Hi[1]
mov ar.ec=3
xor Zlo=Zlo,Zlo };;
{ .mii; add Hi[1]=Htbl,Hi[1] // &Htbl[nlo].lo
add rem_4bitp=rem_4bit#-gcm_gmult_4bit#,rem_4bitp
xor Zhi=Zhi,Zhi };;
___
&loop (".Loop1",1);
$code.=<<___;
.Lend1:
{ .mib; xor Zhi=Zhi,Hhi };; // modulo-scheduling artefact
{ .mib; mux1 Zlo=Zlo,\@rev };;
{ .mib; mux1 Zhi=Zhi,\@rev };;
{ .mmi; add Hlo=9,Xi;; // ;; is here to prevent
add Hhi=1,Xi };; // pipeline flush on Itanium
{ .mib; st8 [Hlo]=Zlo
mov pr=prevpr,0x1ffff };;
{ .mib; st8 [Hhi]=Zhi
mov ar.lc=prevlc
br.ret.sptk.many b0 };;
.endp gcm_gmult_4bit#
___
######################################################################
# "528B" (well, "512B" actualy) streamed GHASH
#
$Xip="in0";
$Htbl="in1";
$inp="in2";
$len="in3";
$rem_8bit="loc0";
$mask0xff="loc1";
($sum,$rum) = $big_endian ? ("nop.m","nop.m") : ("sum","rum");
sub load_htable() {
for (my $i=0;$i<8;$i++) {
$code.=<<___;
{ .mmi; ld8 r`16+2*$i+1`=[r8],16 // Htable[$i].hi
ld8 r`16+2*$i`=[r9],16 } // Htable[$i].lo
{ .mmi; ldf8 f`32+2*$i+1`=[r10],16 // Htable[`8+$i`].hi
ldf8 f`32+2*$i`=[r11],16 // Htable[`8+$i`].lo
___
$code.=shift if (($i+$#_)==7);
$code.="\t};;\n"
}
}
$code.=<<___;
prevsp=r3;
.align 32
.skip 16 // aligns loop body
.global gcm_ghash_4bit#
.proc gcm_ghash_4bit#
gcm_ghash_4bit:
.prologue
{ .mmi; .save ar.pfs,prevfs
alloc prevfs=ar.pfs,4,2,0,0
.vframe prevsp
mov prevsp=sp
mov $rem_8bit=ip };;
.body
{ .mfi; $ADDP r8=0+0,$Htbl
$ADDP r9=0+8,$Htbl }
{ .mfi; $ADDP r10=128+0,$Htbl
$ADDP r11=128+8,$Htbl };;
___
&load_htable(
" $ADDP $Xip=15,$Xip", # &Xi[15]
" $ADDP $len=$len,$inp", # &inp[len]
" $ADDP $inp=15,$inp", # &inp[15]
" mov $mask0xff=0xff",
" add sp=-512,sp",
" andcm sp=sp,$mask0xff", # align stack frame
" add r14=0,sp",
" add r15=8,sp");
$code.=<<___;
{ .mmi; $sum 1<<1 // go big-endian
add r8=256+0,sp
add r9=256+8,sp }
{ .mmi; add r10=256+128+0,sp
add r11=256+128+8,sp
add $len=-17,$len };;
___
for($i=0;$i<8;$i++) { # generate first half of Hshr4[]
my ($rlo,$rhi)=("r".eval(16+2*$i),"r".eval(16+2*$i+1));
$code.=<<___;
{ .mmi; st8 [r8]=$rlo,16 // Htable[$i].lo
st8 [r9]=$rhi,16 // Htable[$i].hi
shrp $rlo=$rhi,$rlo,4 }//;;
{ .mmi; stf8 [r10]=f`32+2*$i`,16 // Htable[`8+$i`].lo
stf8 [r11]=f`32+2*$i+1`,16 // Htable[`8+$i`].hi
shr.u $rhi=$rhi,4 };;
{ .mmi; st8 [r14]=$rlo,16 // Htable[$i].lo>>4
st8 [r15]=$rhi,16 }//;; // Htable[$i].hi>>4
___
}
$code.=<<___;
{ .mmi; ld8 r16=[r8],16 // Htable[8].lo
ld8 r17=[r9],16 };; // Htable[8].hi
{ .mmi; ld8 r18=[r8],16 // Htable[9].lo
ld8 r19=[r9],16 } // Htable[9].hi
{ .mmi; rum 1<<5 // clear um.mfh
shrp r16=r17,r16,4 };;
___
for($i=0;$i<6;$i++) { # generate second half of Hshr4[]
$code.=<<___;
{ .mmi; ld8 r`20+2*$i`=[r8],16 // Htable[`10+$i`].lo
ld8 r`20+2*$i+1`=[r9],16 // Htable[`10+$i`].hi
shr.u r`16+2*$i+1`=r`16+2*$i+1`,4 };;
{ .mmi; st8 [r14]=r`16+2*$i`,16 // Htable[`8+$i`].lo>>4
st8 [r15]=r`16+2*$i+1`,16 // Htable[`8+$i`].hi>>4
shrp r`18+2*$i`=r`18+2*$i+1`,r`18+2*$i`,4 }
___
}
$code.=<<___;
{ .mmi; shr.u r`16+2*$i+1`=r`16+2*$i+1`,4 };;
{ .mmi; st8 [r14]=r`16+2*$i`,16 // Htable[`8+$i`].lo>>4
st8 [r15]=r`16+2*$i+1`,16 // Htable[`8+$i`].hi>>4
shrp r`18+2*$i`=r`18+2*$i+1`,r`18+2*$i`,4 }
{ .mmi; add $Htbl=256,sp // &Htable[0]
add $rem_8bit=rem_8bit#-gcm_ghash_4bit#,$rem_8bit
shr.u r`18+2*$i+1`=r`18+2*$i+1`,4 };;
{ .mmi; st8 [r14]=r`18+2*$i` // Htable[`8+$i`].lo>>4
st8 [r15]=r`18+2*$i+1` } // Htable[`8+$i`].hi>>4
___
$in="r15";
@xi=("r16","r17");
@rem=("r18","r19");
($Alo,$Ahi,$Blo,$Bhi,$Zlo,$Zhi)=("r20","r21","r22","r23","r24","r25");
($Atbl,$Btbl)=("r26","r27");
$code.=<<___; # (p16)
{ .mmi; ld1 $in=[$inp],-1 //(p16) *inp--
ld1 $xi[0]=[$Xip],-1 //(p16) *Xi--
cmp.eq p0,p6=r0,r0 };; // clear p6
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
$code.=<<___; # (p16),(p17)
{ .mmi; ld1 $xi[0]=[$Xip],-1 //(p16) *Xi--
xor $xi[1]=$xi[1],$in };; //(p17) xi=$xi[i]^inp[i]
{ .mii; ld1 $in=[$inp],-1 //(p16) *inp--
dep $Atbl=$xi[1],$Htbl,4,4 //(p17) &Htable[nlo].lo
and $xi[1]=-16,$xi[1] };; //(p17) nhi=xi&0xf0
.align 32
.LOOP:
{ .mmi;
(p6) st8 [$Xip]=$Zhi,13
xor $Zlo=$Zlo,$Zlo
add $Btbl=$xi[1],$Htbl };; //(p17) &Htable[nhi].lo
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
$code.=<<___; # (p16),(p17),(p18)
{ .mmi; ld8 $Alo=[$Atbl],8 //(p18) Htable[nlo].lo,&Htable[nlo].hi
ld8 $rem[0]=[$Btbl],-256 //(p18) Htable[nhi].lo,&Hshr4[nhi].lo
xor $xi[1]=$xi[1],$in };; //(p17) xi=$xi[i]^inp[i]
{ .mfi; ld8 $Ahi=[$Atbl] //(p18) Htable[nlo].hi
dep $Atbl=$xi[1],$Htbl,4,4 } //(p17) &Htable[nlo].lo
{ .mfi; shladd $rem[0]=$rem[0],4,r0 //(p18) Htable[nhi].lo<<4
xor $Zlo=$Zlo,$Alo };; //(p18) Z.lo^=Htable[nlo].lo
{ .mmi; ld8 $Blo=[$Btbl],8 //(p18) Hshr4[nhi].lo,&Hshr4[nhi].hi
ld1 $in=[$inp],-1 } //(p16) *inp--
{ .mmi; xor $rem[0]=$rem[0],$Zlo //(p18) Z.lo^(Htable[nhi].lo<<4)
mov $Zhi=$Ahi //(p18) Z.hi^=Htable[nlo].hi
and $xi[1]=-16,$xi[1] };; //(p17) nhi=xi&0xf0
{ .mmi; ld8 $Bhi=[$Btbl] //(p18) Hshr4[nhi].hi
ld1 $xi[0]=[$Xip],-1 //(p16) *Xi--
shrp $Zlo=$Zhi,$Zlo,8 } //(p18) Z.lo=(Z.hi<<56)|(Z.lo>>8)
{ .mmi; and $rem[0]=$rem[0],$mask0xff //(p18) rem=($Zlo^(Htable[nhi].lo<<4))&0xff
add $Btbl=$xi[1],$Htbl };; //(p17) &Htable[nhi]
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
for ($i=1;$i<14;$i++) {
# Above and below fragments are derived from this one by removing
# unsuitable (p??) instructions.
$code.=<<___; # (p16),(p17),(p18),(p19)
{ .mmi; ld8 $Alo=[$Atbl],8 //(p18) Htable[nlo].lo,&Htable[nlo].hi
ld8 $rem[0]=[$Btbl],-256 //(p18) Htable[nhi].lo,&Hshr4[nhi].lo
shr.u $Zhi=$Zhi,8 } //(p19) Z.hi>>=8
{ .mmi; shladd $rem[1]=$rem[1],1,$rem_8bit //(p19) &rem_8bit[rem]
xor $Zlo=$Zlo,$Blo //(p19) Z.lo^=Hshr4[nhi].lo
xor $xi[1]=$xi[1],$in };; //(p17) xi=$xi[i]^inp[i]
{ .mmi; ld8 $Ahi=[$Atbl] //(p18) Htable[nlo].hi
ld2 $rem[1]=[$rem[1]] //(p19) rem_8bit[rem]
dep $Atbl=$xi[1],$Htbl,4,4 } //(p17) &Htable[nlo].lo
{ .mmi; shladd $rem[0]=$rem[0],4,r0 //(p18) Htable[nhi].lo<<4
xor $Zlo=$Zlo,$Alo //(p18) Z.lo^=Htable[nlo].lo
xor $Zhi=$Zhi,$Bhi };; //(p19) Z.hi^=Hshr4[nhi].hi
{ .mmi; ld8 $Blo=[$Btbl],8 //(p18) Hshr4[nhi].lo,&Hshr4[nhi].hi
ld1 $in=[$inp],-1 //(p16) *inp--
shl $rem[1]=$rem[1],48 } //(p19) rem_8bit[rem]<<48
{ .mmi; xor $rem[0]=$rem[0],$Zlo //(p18) Z.lo^(Htable[nhi].lo<<4)
xor $Zhi=$Zhi,$Ahi //(p18) Z.hi^=Htable[nlo].hi
and $xi[1]=-16,$xi[1] };; //(p17) nhi=xi&0xf0
{ .mmi; ld8 $Bhi=[$Btbl] //(p18) Hshr4[nhi].hi
ld1 $xi[0]=[$Xip],-1 //(p16) *Xi--
shrp $Zlo=$Zhi,$Zlo,8 } //(p18) Z.lo=(Z.hi<<56)|(Z.lo>>8)
{ .mmi; and $rem[0]=$rem[0],$mask0xff //(p18) rem=($Zlo^(Htable[nhi].lo<<4))&0xff
xor $Zhi=$Zhi,$rem[1] //(p19) Z.hi^=rem_8bit[rem]<<48
add $Btbl=$xi[1],$Htbl };; //(p17) &Htable[nhi]
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
}
$code.=<<___; # (p17),(p18),(p19)
{ .mmi; ld8 $Alo=[$Atbl],8 //(p18) Htable[nlo].lo,&Htable[nlo].hi
ld8 $rem[0]=[$Btbl],-256 //(p18) Htable[nhi].lo,&Hshr4[nhi].lo
shr.u $Zhi=$Zhi,8 } //(p19) Z.hi>>=8
{ .mmi; shladd $rem[1]=$rem[1],1,$rem_8bit //(p19) &rem_8bit[rem]
xor $Zlo=$Zlo,$Blo //(p19) Z.lo^=Hshr4[nhi].lo
xor $xi[1]=$xi[1],$in };; //(p17) xi=$xi[i]^inp[i]
{ .mmi; ld8 $Ahi=[$Atbl] //(p18) Htable[nlo].hi
ld2 $rem[1]=[$rem[1]] //(p19) rem_8bit[rem]
dep $Atbl=$xi[1],$Htbl,4,4 };; //(p17) &Htable[nlo].lo
{ .mmi; shladd $rem[0]=$rem[0],4,r0 //(p18) Htable[nhi].lo<<4
xor $Zlo=$Zlo,$Alo //(p18) Z.lo^=Htable[nlo].lo
xor $Zhi=$Zhi,$Bhi };; //(p19) Z.hi^=Hshr4[nhi].hi
{ .mmi; ld8 $Blo=[$Btbl],8 //(p18) Hshr4[nhi].lo,&Hshr4[nhi].hi
shl $rem[1]=$rem[1],48 } //(p19) rem_8bit[rem]<<48
{ .mmi; xor $rem[0]=$rem[0],$Zlo //(p18) Z.lo^(Htable[nhi].lo<<4)
xor $Zhi=$Zhi,$Ahi //(p18) Z.hi^=Htable[nlo].hi
and $xi[1]=-16,$xi[1] };; //(p17) nhi=xi&0xf0
{ .mmi; ld8 $Bhi=[$Btbl] //(p18) Hshr4[nhi].hi
shrp $Zlo=$Zhi,$Zlo,8 } //(p18) Z.lo=(Z.hi<<56)|(Z.lo>>8)
{ .mmi; and $rem[0]=$rem[0],$mask0xff //(p18) rem=($Zlo^(Htable[nhi].lo<<4))&0xff
xor $Zhi=$Zhi,$rem[1] //(p19) Z.hi^=rem_8bit[rem]<<48
add $Btbl=$xi[1],$Htbl };; //(p17) &Htable[nhi]
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
$code.=<<___; # (p18),(p19)
{ .mfi; ld8 $Alo=[$Atbl],8 //(p18) Htable[nlo].lo,&Htable[nlo].hi
shr.u $Zhi=$Zhi,8 } //(p19) Z.hi>>=8
{ .mfi; shladd $rem[1]=$rem[1],1,$rem_8bit //(p19) &rem_8bit[rem]
xor $Zlo=$Zlo,$Blo };; //(p19) Z.lo^=Hshr4[nhi].lo
{ .mfi; ld8 $Ahi=[$Atbl] //(p18) Htable[nlo].hi
xor $Zlo=$Zlo,$Alo } //(p18) Z.lo^=Htable[nlo].lo
{ .mfi; ld2 $rem[1]=[$rem[1]] //(p19) rem_8bit[rem]
xor $Zhi=$Zhi,$Bhi };; //(p19) Z.hi^=Hshr4[nhi].hi
{ .mfi; ld8 $Blo=[$Btbl],8 //(p18) Htable[nhi].lo,&Htable[nhi].hi
shl $rem[1]=$rem[1],48 } //(p19) rem_8bit[rem]<<48
{ .mfi; shladd $rem[0]=$Zlo,4,r0 //(p18) Z.lo<<4
xor $Zhi=$Zhi,$Ahi };; //(p18) Z.hi^=Htable[nlo].hi
{ .mfi; ld8 $Bhi=[$Btbl] //(p18) Htable[nhi].hi
shrp $Zlo=$Zhi,$Zlo,4 } //(p18) Z.lo=(Z.hi<<60)|(Z.lo>>4)
{ .mfi; and $rem[0]=$rem[0],$mask0xff //(p18) rem=($Zlo^(Htable[nhi].lo<<4))&0xff
xor $Zhi=$Zhi,$rem[1] };; //(p19) Z.hi^=rem_8bit[rem]<<48
___
push (@xi,shift(@xi)); push (@rem,shift(@rem)); # "rotate" registers
$code.=<<___; # (p19)
{ .mmi; cmp.ltu p6,p0=$inp,$len
add $inp=32,$inp
shr.u $Zhi=$Zhi,4 } //(p19) Z.hi>>=4
{ .mmi; shladd $rem[1]=$rem[1],1,$rem_8bit //(p19) &rem_8bit[rem]
xor $Zlo=$Zlo,$Blo //(p19) Z.lo^=Hshr4[nhi].lo
add $Xip=9,$Xip };; // &Xi.lo
{ .mmi; ld2 $rem[1]=[$rem[1]] //(p19) rem_8bit[rem]
(p6) ld1 $in=[$inp],-1 //[p16] *inp--
(p6) extr.u $xi[1]=$Zlo,8,8 } //[p17] Xi[14]
{ .mmi; xor $Zhi=$Zhi,$Bhi //(p19) Z.hi^=Hshr4[nhi].hi
(p6) and $xi[0]=$Zlo,$mask0xff };; //[p16] Xi[15]
{ .mmi; st8 [$Xip]=$Zlo,-8
(p6) xor $xi[0]=$xi[0],$in //[p17] xi=$xi[i]^inp[i]
shl $rem[1]=$rem[1],48 };; //(p19) rem_8bit[rem]<<48
{ .mmi;
(p6) ld1 $in=[$inp],-1 //[p16] *inp--
xor $Zhi=$Zhi,$rem[1] //(p19) Z.hi^=rem_8bit[rem]<<48
(p6) dep $Atbl=$xi[0],$Htbl,4,4 } //[p17] &Htable[nlo].lo
{ .mib;
(p6) and $xi[0]=-16,$xi[0] //[p17] nhi=xi&0xf0
(p6) br.cond.dptk.many .LOOP };;
{ .mib; st8 [$Xip]=$Zhi };;
{ .mib; $rum 1<<1 // return to little-endian
.restore sp
mov sp=prevsp
br.ret.sptk.many b0 };;
.endp gcm_ghash_4bit#
___
$code.=<<___;
.align 128
.type rem_4bit#,\@object
rem_4bit:
data8 0x0000<<48, 0x1C20<<48, 0x3840<<48, 0x2460<<48
data8 0x7080<<48, 0x6CA0<<48, 0x48C0<<48, 0x54E0<<48
data8 0xE100<<48, 0xFD20<<48, 0xD940<<48, 0xC560<<48
data8 0x9180<<48, 0x8DA0<<48, 0xA9C0<<48, 0xB5E0<<48
.size rem_4bit#,128
.type rem_8bit#,\@object
rem_8bit:
data1 0x00,0x00, 0x01,0xC2, 0x03,0x84, 0x02,0x46, 0x07,0x08, 0x06,0xCA, 0x04,0x8C, 0x05,0x4E
data1 0x0E,0x10, 0x0F,0xD2, 0x0D,0x94, 0x0C,0x56, 0x09,0x18, 0x08,0xDA, 0x0A,0x9C, 0x0B,0x5E
data1 0x1C,0x20, 0x1D,0xE2, 0x1F,0xA4, 0x1E,0x66, 0x1B,0x28, 0x1A,0xEA, 0x18,0xAC, 0x19,0x6E
data1 0x12,0x30, 0x13,0xF2, 0x11,0xB4, 0x10,0x76, 0x15,0x38, 0x14,0xFA, 0x16,0xBC, 0x17,0x7E
data1 0x38,0x40, 0x39,0x82, 0x3B,0xC4, 0x3A,0x06, 0x3F,0x48, 0x3E,0x8A, 0x3C,0xCC, 0x3D,0x0E
data1 0x36,0x50, 0x37,0x92, 0x35,0xD4, 0x34,0x16, 0x31,0x58, 0x30,0x9A, 0x32,0xDC, 0x33,0x1E
data1 0x24,0x60, 0x25,0xA2, 0x27,0xE4, 0x26,0x26, 0x23,0x68, 0x22,0xAA, 0x20,0xEC, 0x21,0x2E
data1 0x2A,0x70, 0x2B,0xB2, 0x29,0xF4, 0x28,0x36, 0x2D,0x78, 0x2C,0xBA, 0x2E,0xFC, 0x2F,0x3E
data1 0x70,0x80, 0x71,0x42, 0x73,0x04, 0x72,0xC6, 0x77,0x88, 0x76,0x4A, 0x74,0x0C, 0x75,0xCE
data1 0x7E,0x90, 0x7F,0x52, 0x7D,0x14, 0x7C,0xD6, 0x79,0x98, 0x78,0x5A, 0x7A,0x1C, 0x7B,0xDE
data1 0x6C,0xA0, 0x6D,0x62, 0x6F,0x24, 0x6E,0xE6, 0x6B,0xA8, 0x6A,0x6A, 0x68,0x2C, 0x69,0xEE
data1 0x62,0xB0, 0x63,0x72, 0x61,0x34, 0x60,0xF6, 0x65,0xB8, 0x64,0x7A, 0x66,0x3C, 0x67,0xFE
data1 0x48,0xC0, 0x49,0x02, 0x4B,0x44, 0x4A,0x86, 0x4F,0xC8, 0x4E,0x0A, 0x4C,0x4C, 0x4D,0x8E
data1 0x46,0xD0, 0x47,0x12, 0x45,0x54, 0x44,0x96, 0x41,0xD8, 0x40,0x1A, 0x42,0x5C, 0x43,0x9E
data1 0x54,0xE0, 0x55,0x22, 0x57,0x64, 0x56,0xA6, 0x53,0xE8, 0x52,0x2A, 0x50,0x6C, 0x51,0xAE
data1 0x5A,0xF0, 0x5B,0x32, 0x59,0x74, 0x58,0xB6, 0x5D,0xF8, 0x5C,0x3A, 0x5E,0x7C, 0x5F,0xBE
data1 0xE1,0x00, 0xE0,0xC2, 0xE2,0x84, 0xE3,0x46, 0xE6,0x08, 0xE7,0xCA, 0xE5,0x8C, 0xE4,0x4E
data1 0xEF,0x10, 0xEE,0xD2, 0xEC,0x94, 0xED,0x56, 0xE8,0x18, 0xE9,0xDA, 0xEB,0x9C, 0xEA,0x5E
data1 0xFD,0x20, 0xFC,0xE2, 0xFE,0xA4, 0xFF,0x66, 0xFA,0x28, 0xFB,0xEA, 0xF9,0xAC, 0xF8,0x6E
data1 0xF3,0x30, 0xF2,0xF2, 0xF0,0xB4, 0xF1,0x76, 0xF4,0x38, 0xF5,0xFA, 0xF7,0xBC, 0xF6,0x7E
data1 0xD9,0x40, 0xD8,0x82, 0xDA,0xC4, 0xDB,0x06, 0xDE,0x48, 0xDF,0x8A, 0xDD,0xCC, 0xDC,0x0E
data1 0xD7,0x50, 0xD6,0x92, 0xD4,0xD4, 0xD5,0x16, 0xD0,0x58, 0xD1,0x9A, 0xD3,0xDC, 0xD2,0x1E
data1 0xC5,0x60, 0xC4,0xA2, 0xC6,0xE4, 0xC7,0x26, 0xC2,0x68, 0xC3,0xAA, 0xC1,0xEC, 0xC0,0x2E
data1 0xCB,0x70, 0xCA,0xB2, 0xC8,0xF4, 0xC9,0x36, 0xCC,0x78, 0xCD,0xBA, 0xCF,0xFC, 0xCE,0x3E
data1 0x91,0x80, 0x90,0x42, 0x92,0x04, 0x93,0xC6, 0x96,0x88, 0x97,0x4A, 0x95,0x0C, 0x94,0xCE
data1 0x9F,0x90, 0x9E,0x52, 0x9C,0x14, 0x9D,0xD6, 0x98,0x98, 0x99,0x5A, 0x9B,0x1C, 0x9A,0xDE
data1 0x8D,0xA0, 0x8C,0x62, 0x8E,0x24, 0x8F,0xE6, 0x8A,0xA8, 0x8B,0x6A, 0x89,0x2C, 0x88,0xEE
data1 0x83,0xB0, 0x82,0x72, 0x80,0x34, 0x81,0xF6, 0x84,0xB8, 0x85,0x7A, 0x87,0x3C, 0x86,0xFE
data1 0xA9,0xC0, 0xA8,0x02, 0xAA,0x44, 0xAB,0x86, 0xAE,0xC8, 0xAF,0x0A, 0xAD,0x4C, 0xAC,0x8E
data1 0xA7,0xD0, 0xA6,0x12, 0xA4,0x54, 0xA5,0x96, 0xA0,0xD8, 0xA1,0x1A, 0xA3,0x5C, 0xA2,0x9E
data1 0xB5,0xE0, 0xB4,0x22, 0xB6,0x64, 0xB7,0xA6, 0xB2,0xE8, 0xB3,0x2A, 0xB1,0x6C, 0xB0,0xAE
data1 0xBB,0xF0, 0xBA,0x32, 0xB8,0x74, 0xB9,0xB6, 0xBC,0xF8, 0xBD,0x3A, 0xBF,0x7C, 0xBE,0xBE
.size rem_8bit#,512
stringz "GHASH for IA64, CRYPTOGAMS by <appro\@openssl.org>"
___
$code =~ s/mux1(\s+)\S+\@rev/nop.i$1 0x0/gm if ($big_endian);
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT;
Reference in a new issue View git blame Copy permalink