virtualx-engine/drivers/builtin_openssl2/crypto/rc4/asm/rc4-parisc.pl
Juan Linietsky 678948068b Small Issues & Maintenance
-=-=-=-=-=-=-=-=-=-=-=-=-=

-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes
2014-08-01 22:10:38 -03:00

314 lines
6.6 KiB
Raku

#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# RC4 for PA-RISC.
# June 2009.
#
# Performance is 33% better than gcc 3.2 generated code on PA-7100LC.
# For reference, [4x] unrolled loop is >40% faster than folded one.
# It's possible to unroll loop 8 times on PA-RISC 2.0, but improvement
# is believed to be not sufficient to justify the effort...
#
# Special thanks to polarhome.com for providing HP-UX account.
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
$flavour = shift;
$output = shift;
open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
$SIZE_T =8;
$FRAME_MARKER =80;
$SAVED_RP =16;
$PUSH ="std";
$PUSHMA ="std,ma";
$POP ="ldd";
$POPMB ="ldd,mb";
} else {
$LEVEL ="1.0";
$SIZE_T =4;
$FRAME_MARKER =48;
$SAVED_RP =20;
$PUSH ="stw";
$PUSHMA ="stwm";
$POP ="ldw";
$POPMB ="ldwm";
}
$FRAME=4*$SIZE_T+$FRAME_MARKER; # 4 saved regs + frame marker
# [+ argument transfer]
$SZ=1; # defaults to RC4_CHAR
if (open CONF,"<${dir}../../opensslconf.h") {
while(<CONF>) {
if (m/#\s*define\s+RC4_INT\s+(.*)/) {
$SZ = ($1=~/char$/) ? 1 : 4;
last;
}
}
close CONF;
}
if ($SZ==1) { # RC4_CHAR
$LD="ldb";
$LDX="ldbx";
$MKX="addl";
$ST="stb";
} else { # RC4_INT (~5% faster than RC4_CHAR on PA-7100LC)
$LD="ldw";
$LDX="ldwx,s";
$MKX="sh2addl";
$ST="stw";
}
$key="%r26";
$len="%r25";
$inp="%r24";
$out="%r23";
@XX=("%r19","%r20");
@TX=("%r21","%r22");
$YY="%r28";
$TY="%r29";
$acc="%r1";
$ix="%r2";
$iy="%r3";
$dat0="%r4";
$dat1="%r5";
$rem="%r6";
$mask="%r31";
sub unrolledloopbody {
for ($i=0;$i<4;$i++) {
$code.=<<___;
ldo 1($XX[0]),$XX[1]
`sprintf("$LDX %$TY(%$key),%$dat1") if ($i>0)`
and $mask,$XX[1],$XX[1]
$LDX $YY($key),$TY
$MKX $YY,$key,$ix
$LDX $XX[1]($key),$TX[1]
$MKX $XX[0],$key,$iy
$ST $TX[0],0($ix)
comclr,<> $XX[1],$YY,%r0 ; conditional
copy $TX[0],$TX[1] ; move
`sprintf("%sdep %$dat1,%d,8,%$acc",$i==1?"z":"",8*($i-1)+7) if ($i>0)`
$ST $TY,0($iy)
addl $TX[0],$TY,$TY
addl $TX[1],$YY,$YY
and $mask,$TY,$TY
and $mask,$YY,$YY
___
push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
} }
sub foldedloop {
my ($label,$count)=@_;
$code.=<<___;
$label
$MKX $YY,$key,$iy
$LDX $YY($key),$TY
$MKX $XX[0],$key,$ix
$ST $TX[0],0($iy)
ldo 1($XX[0]),$XX[0]
$ST $TY,0($ix)
addl $TX[0],$TY,$TY
ldbx $inp($out),$dat1
and $mask,$TY,$TY
and $mask,$XX[0],$XX[0]
$LDX $TY($key),$acc
$LDX $XX[0]($key),$TX[0]
ldo 1($out),$out
xor $dat1,$acc,$acc
addl $TX[0],$YY,$YY
stb $acc,-1($out)
addib,<> -1,$count,$label ; $count is always small
and $mask,$YY,$YY
___
}
$code=<<___;
.LEVEL $LEVEL
.SPACE \$TEXT\$
.SUBSPA \$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
.EXPORT RC4,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR
RC4
.PROC
.CALLINFO FRAME=`$FRAME-4*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=6
.ENTRY
$PUSH %r2,-$SAVED_RP(%sp) ; standard prologue
$PUSHMA %r3,$FRAME(%sp)
$PUSH %r4,`-$FRAME+1*$SIZE_T`(%sp)
$PUSH %r5,`-$FRAME+2*$SIZE_T`(%sp)
$PUSH %r6,`-$FRAME+3*$SIZE_T`(%sp)
cmpib,*= 0,$len,L\$abort
sub $inp,$out,$inp ; distance between $inp and $out
$LD `0*$SZ`($key),$XX[0]
$LD `1*$SZ`($key),$YY
ldo `2*$SZ`($key),$key
ldi 0xff,$mask
ldi 3,$dat0
ldo 1($XX[0]),$XX[0] ; warm up loop
and $mask,$XX[0],$XX[0]
$LDX $XX[0]($key),$TX[0]
addl $TX[0],$YY,$YY
cmpib,*>>= 6,$len,L\$oop1 ; is $len large enough to bother?
and $mask,$YY,$YY
and,<> $out,$dat0,$rem ; is $out aligned?
b L\$alignedout
subi 4,$rem,$rem
sub $len,$rem,$len
___
&foldedloop("L\$alignout",$rem); # process till $out is aligned
$code.=<<___;
L\$alignedout ; $len is at least 4 here
and,<> $inp,$dat0,$acc ; is $inp aligned?
b L\$oop4
sub $inp,$acc,$rem ; align $inp
sh3addl $acc,%r0,$acc
subi 32,$acc,$acc
mtctl $acc,%cr11 ; load %sar with vshd align factor
ldwx $rem($out),$dat0
ldo 4($rem),$rem
L\$oop4misalignedinp
___
&unrolledloopbody();
$code.=<<___;
$LDX $TY($key),$ix
ldwx $rem($out),$dat1
ldo -4($len),$len
or $ix,$acc,$acc ; last piece, no need to dep
vshd $dat0,$dat1,$iy ; align data
copy $dat1,$dat0
xor $iy,$acc,$acc
stw $acc,0($out)
cmpib,*<< 3,$len,L\$oop4misalignedinp
ldo 4($out),$out
cmpib,*= 0,$len,L\$done
nop
b L\$oop1
nop
.ALIGN 8
L\$oop4
___
&unrolledloopbody();
$code.=<<___;
$LDX $TY($key),$ix
ldwx $inp($out),$dat0
ldo -4($len),$len
or $ix,$acc,$acc ; last piece, no need to dep
xor $dat0,$acc,$acc
stw $acc,0($out)
cmpib,*<< 3,$len,L\$oop4
ldo 4($out),$out
cmpib,*= 0,$len,L\$done
nop
___
&foldedloop("L\$oop1",$len);
$code.=<<___;
L\$done
$POP `-$FRAME-$SAVED_RP`(%sp),%r2
ldo -1($XX[0]),$XX[0] ; chill out loop
sub $YY,$TX[0],$YY
and $mask,$XX[0],$XX[0]
and $mask,$YY,$YY
$ST $XX[0],`-2*$SZ`($key)
$ST $YY,`-1*$SZ`($key)
$POP `-$FRAME+1*$SIZE_T`(%sp),%r4
$POP `-$FRAME+2*$SIZE_T`(%sp),%r5
$POP `-$FRAME+3*$SIZE_T`(%sp),%r6
L\$abort
bv (%r2)
.EXIT
$POPMB -$FRAME(%sp),%r3
.PROCEND
___
$code.=<<___;
.EXPORT private_RC4_set_key,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
.ALIGN 8
private_RC4_set_key
.PROC
.CALLINFO NO_CALLS
.ENTRY
$ST %r0,`0*$SZ`($key)
$ST %r0,`1*$SZ`($key)
ldo `2*$SZ`($key),$key
copy %r0,@XX[0]
L\$1st
$ST @XX[0],0($key)
ldo 1(@XX[0]),@XX[0]
bb,>= @XX[0],`31-8`,L\$1st ; @XX[0]<256
ldo $SZ($key),$key
ldo `-256*$SZ`($key),$key ; rewind $key
addl $len,$inp,$inp ; $inp to point at the end
sub %r0,$len,%r23 ; inverse index
copy %r0,@XX[0]
copy %r0,@XX[1]
ldi 0xff,$mask
L\$2nd
$LDX @XX[0]($key),@TX[0]
ldbx %r23($inp),@TX[1]
addi,nuv 1,%r23,%r23 ; increment and conditional
sub %r0,$len,%r23 ; inverse index
addl @TX[0],@XX[1],@XX[1]
addl @TX[1],@XX[1],@XX[1]
and $mask,@XX[1],@XX[1]
$MKX @XX[0],$key,$TY
$LDX @XX[1]($key),@TX[1]
$MKX @XX[1],$key,$YY
ldo 1(@XX[0]),@XX[0]
$ST @TX[0],0($YY)
bb,>= @XX[0],`31-8`,L\$2nd ; @XX[0]<256
$ST @TX[1],0($TY)
bv,n (%r2)
.EXIT
nop
.PROCEND
.EXPORT RC4_options,ENTRY
.ALIGN 8
RC4_options
.PROC
.CALLINFO NO_CALLS
.ENTRY
blr %r0,%r28
ldi 3,%r1
L\$pic
andcm %r28,%r1,%r28
bv (%r2)
.EXIT
ldo L\$opts-L\$pic(%r28),%r28
.PROCEND
.ALIGN 8
L\$opts
.STRINGZ "rc4(4x,`$SZ==1?"char":"int"`)"
.STRINGZ "RC4 for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
$code =~ s/cmpib,\*/comib,/gm if ($SIZE_T==4);
$code =~ s/\bbv\b/bve/gm if ($SIZE_T==8);
print $code;
close STDOUT;