Read card names directly from individual procfs files, and pass them
to amixer using the '-c' option.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sorting the list of loaded modules makes it much easier to compare
two alsa-info.txt files, even if they are both from the same system
(since the order actually changes after each reboot).
lsmod just formats the contents of /proc/modules. After this script
calls lsmod, it strips everything but module names from the output.
This same result can be obtained just as easily by reading directly
from /proc/modules; then there is no need to remove the header line
printed by lsmod before sorting the output.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include numeric IDs and subsystem info in the PCI device output,
without placing them in a separate section.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function loads and parses the topology file and
saves back the structured output in the alsa-lib's format
without comments.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
While the progress bar cannot be negative, GCC concludes that it can be
and assumes tmp can be written past the end. Fixes this GCC warning:
aplay.c:1747:18: warning: '%02d' directive writing between 2 and 11 bytes
into a region of size 4 [-Wformat-overflow=]
1747 | sprintf(tmp, "%02d%%", maxperc[c]);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It also reduces compiled size slightly.
aplay.c: In function 'capture':
aplay.c:3055:34: error: '-01' directive output may be truncated writing 3
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~
aplay.c:3055:4: note: 'snprintf' output between 4 and 4100 bytes into a
destination of size 4097
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3053:34: error: '-01.' directive output may be truncated writing 4
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~
aplay.c:3053:4: note: 'snprintf' output 5 or more bytes (assuming 4101)
into a destination of size 4097
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3065:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~
aplay.c:3065:30: note: directive argument in the range [1, 2147483647]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~
aplay.c:3065:3: note: 'snprintf' output between 4 and 4108 bytes into a
destination of size 4097
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3063:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~
aplay.c:3063:30: note: directive argument in the range [1, 2147483647]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~~~~~~~~~
aplay.c:3063:3: note: 'snprintf' output 5 or more bytes (assuming 4109)
into a destination of size 4097
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
uint64_t evaluates to unsigned long long on 32-bit, not unsigned long.
Use the proper formats.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When running for IRQ-based scheduling model, transmission backend is
expected to queue PCM event in different context from the main thread.
When queueing no events during time equivalent to one period of PCM
buffer, the backend has problems.
This commit outputs report it for non-blocking operation for IRQ-based
scheduling model. The timeout is equivalent to all frames in buffer,
instead of period for safe.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit applies code refactoring for waiting PCM event queued
per period of PCM buffer in copying operation for IRQ-based scheduling
model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When running for IRQ-based scheduling model, transmission backend is
expected to queue PCM event in different context from the main thread.
When queueing no events during time equivalent to one period of PCM
buffer, the backend has problems.
This commit outputs report it for mmap operation for IRQ-based
scheduling model. The timeout is equivalent to all frames in buffer,
instead of period for safe.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Although the waiter abstraction handles timeout as success, it should
report for callers to know timeout.
This commit takes the waiter to return -ETIMEDOUT when timeout expires.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
A call of select(2) returns negative code and report errors via errno
local variable, howver current waiter implementation for select(2)
returns the negative code instead of errno.
This commit fixes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
A call of select(2) returns error code at failure, the number of file
descriptors available I/O at success. Current implementation of
waiter abstraction for select(2) returns 0 at success and callers
can't get the number.
This commit fixes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
setup_chmap() will return with error number if hw_map calloc fail or
channels doesn't match with hw_params, but memory free was ignored when
error occurs.
Signed-off-by: chunxu.li <chunxuxiao@gmail.com>
Reviewed-by: Takashi Sakamoto o-takashi@sakamocchi.jp
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
exp10 is a GNU extension and not available everywhere (eg. uClibc-ng).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In system V ABIs with ILP32 data model, bit shift for '1ul' can brings
undefined behaviour when the calculation result is over 32 bit width.
This commit fixes the bug.
Reported-by: Rolf Eike Beer <eike@sf-mail.de>
Reference: https://bugs.gentoo.org/681652
Reference: https://github.com/alsa-project/alsa-utils/issues/23
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each container should be configured to store one saple per frame in
demuxer case. This commit fixes the bug.
Fixes: 25c8e3bebb ('axfer: add support for a mapper for multiple target')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit fixes uninitialized return value from a call of test_mux() and
text_demux() to suppress warnings below:
$ make check
...
gcc -DHAVE_CONFIG_H -I. -I../../include -O2 -Wall -pipe -g -MT mapper-test.o -MD -MP -MF .deps/mapper-test.Tpo -c -o mapper-test.o mapper-test.c
mapper-test.c: In function ‘test_mapper’:
mapper-test.c:241:9: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return err;
^~~
mapper-test.c:231:5: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (err < 0)
^
Fixes: 39d1ab8a0c: ('axfer: add a unit test for mapper interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit fixes uninitialized return value from a call of test_vector()
to suppress a warning below.
gcc -DHAVE_CONFIG_H -I. -I../../include -O2 -Wall -pipe -g -MT mapper-test.o -MD -MP -MF .deps/mapper-test.Tpo -c -o mapper-test.o mapper-test.c
mapper-test.c: In function ‘test_vector’:
mapper-test.c:293:6: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized]
int err;
^~~
Fixes: 39d1ab8a0c: ('axfer: add a unit test for mapper interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This avoids multiple definitions of the same global variable (one in
each file that includes this header), and fixes a linking error when
compiled with -fno-common.
Fixes: 96110793b3 ("axfer: add support for a container of raw data")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
struct block_v120_format defines these members as uint8_t. On
little-endian systems, no swapping is done, and the generated block
header is fine. However, on big-endian machines, the value is swapped to
the high byte and then truncated by the assignment, causing both
bits_per_sample and samples_per_frame to be zero.
This fixes an assertion failure in container-test when later
parsing the header ["assert(*samples_per_frame > 0);" in
container_context_pre_process()].
Fixes: 4ab7510f3a: ("axfer: add support for a container of Creative Tech. voice format")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Get rid of a warning about implicit declaration of exp10, which is
behind _GNU_SOURCE as a non-standard feature. The same problem was fixed
for alsamixer in commit 116488e5f2.
Signed-off-by: Milton Vandersloot <miltonvandersloot@fake-box.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
