This patch includes the reference asound.state config files
on Intel Skylake, Broadwell and Hsawell platforms
Signed-off-by: Focus Luo <focus.luo@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch includes automated test scripts for linux audio driver
based on alsa-lib interface by using alsabat as test tool.
It supports analog and display(HDMI/DP) audio test.
The package needs the alsa-utils, alsa-lib installed environment.
Signed-off-by: Focus Luo <focus.luo@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The compilation fails due to multiple defination of snr_is_valid
common.o: In function `snr_is_valid':
bat/common.h:99: multiple definition of `snr_is_valid'
bat.o:bat/common.h:99: first defined here
signal.o: In function `snr_is_valid':
bat/common.h:99: multiple definition of `snr_is_valid'
bat.o:bat/common.h:99: first defined here
latencytest.o: In function `snr_is_valid':
bat/common.h:99: multiple definition of `snr_is_valid'
bat.o:bat/common.h:99: first defined here
analyze.o: In function `snr_is_valid':
bat/common.h:99: multiple definition of `snr_is_valid'
bat.o:bat/common.h:99: first defined here
alsa.o: In function `snr_is_valid':
bat/common.h:99: multiple definition of `snr_is_valid'
bat.o:bat/common.h:99: first defined here
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alsabat reports error when noise above threshold be detected.
Use either of the options below to designate the threshold. (e.g.
if the ratio of noise to signal is 5%, the snr is about 26dB.)
--snr-db <value in dB>
--snr-pc <value in %>
The noise detection is performed in time domain. On each period
of the sine wave being analyzed, alsabat substracts a clean sine
wave from the source, calculates the RMS value of the residual,
and compares the result with the threshold. At last, alsabat
returns the number of periods with noise above threshold. 0 is
returned when the source is clean.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function generate_sine_wave_raw_mono(). It serves as a single
channel sine wave generator, to provide data for calculation (e.g.
for noise analysis).
The function is similar to generate_sine_wave(), but a lite revision.
It has no dependency on bat channels and target frequency, no malloc
inside, no data conversion from float to integer samples, and supports
one channel only.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function adjust_waveform() is a component of generate_sine_wave(),
and depended on bat->channels parameter. Add parameter "channels" to
remove the dependency, and then adjust_waveform() can be applied on
other use cases, e.g. a single channel sine wave generator.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Aligning the data type of fftw analyzer, sample converter and other
components on float, because:
1. avoid unnecessary data type conversion;
2. using float is more efficient than using double;
3. the extra double accuracy is not required.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio latency is the time delay as an audio signal passes through
a system. There are many kinds of audio latency metrics. One useful
metric is the round trip latency, which is the sum of output latency
and input latency.
The measurement step works like below:
1. Listen and measure the average loudness of the environment for
one second;
2. Create a threshold value 16 decibels higher than the average
loudness;
3. Begin playing a ~1000 Hz sine wave and start counting the samples
elapsed;
4. Stop counting and playing if the input's loudness is higher than
the threshold, as the output wave is probably coming back;
5. Calculate the audio latency value in milliseconds.
Signed-off-by: Zhang Vivian <vivian.zhang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a possible memory leak in generate_sine_wave(). Memory free was
ignored when the function return an error.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add buffer size and period size settings in alsabat.
With -E and -B options, alsabat performs the test with
specified buffer size and period size
Signed-off-by: Zhang Vivian <vivian.zhang@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In loopback test, alsabat use pthread_join(pthread_t thread, **retval)
to wait for the capture thread to terminate. If the capture thread was
canceled, PTHREAD_CANCELED is placed in *retval, and the access to the
**retval will fail. Add status check to prevent illegal access to the
**retval.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use "configure --enable-alsabat-backend-tiny" for alsabat to use
tinyalsa as backend lib. On a system that has both ALSA and tinyalsa
installed, alsabat will use ALSA library by default.
The intention is for alsabat to run on tinyalsa platforms such as
Android or some Internet of Things(IoT) devices.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move all alsa callings to a single block (alsa.c), so other blocks
such as the main structure, the signal process and the data analysis
modules will be independent to alsa, and new modules such as a
tinyalsa interface can be easily embedded into alsabat.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use general data generator to replace local function, so other
modules can reuse the data generator rather than re-implement it.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove unnecessary prints in playback and capture threads, and replace
the return value "0" with error code for convenience of maintaining.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In playback thread, use general function update_wav_header()
to replace a bunch of code, so the structure is cleaner and
no need to define variable "wav".
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Refactoring ALSA capture thread:
1. Move file open/seek operations to sub function, so all file
processes are now on a single function (read_from_pcm_loop()), so
the structure is more reasonable, the function API is simplified
and no need file cleanup in thread loop.
2. Replace the wav header processing lines with a general function
(update_wav_header()), which can be reused in other sections.
3. Add pthread_exit() for thread to exit safely in single line mode,
and correct comment.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use variable instead of 0/1 to indicate the return value of
playback and capture threads.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All files should be opened in either "rb" or "wb" in current
usage.
Remove incorrect and unneccesary prints.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Preserve errno value before use, since the value might be
changed by another library call.
Add "#include <errno.h>" and remove redundant include.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add bash script for alsabat feature test. It covers basic alsabat
features, including waveform and wav file generate, playback,
capture and analysis with configurable parameters under different
work modes. (loopback, single line, standalone and local mode)
Usage examples:
alsabat-test.sh
alsabat-test.sh plughw:1,0
alsabat-test.sh plughw:1,0 plughw:1,0
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for standalone mode where alsabat will run on a
different machine to the one being tested.
In standalone mode, the alsabat just generates, playback and
capture sound data like in normal mode, but does not analyze.
The alsabat being built without libfftw3 support is always work
in standalone mode.
The alsabat in normal mode can also bypass data analysis using
option "--standalone".
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add default name for the playback and capture devices, in case
they were not set by user through '-D', '-P' or '-C' options.
Previously, if no device be specified, the alsabat will start
a playback thread and a capture thread, and then exit the
threads with error log.
If only one of playback and capture is specified, the alsabat
will work on single line mode as before, where only one thread
(playback or capture) will be started.
The patch was tested on Ubuntu and Chrome OS.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Truncate the sample frames to powers of 2, since the FFTW algorithm
runs especially fast in this case, and other sizes may be computed
by means of a slow, general-purpose algorithm.
In my test environment applying the patch, a sound clip of 33072
frames is cut off to 32768 frames before analysis, and the time
cost is reduced from 6.128s to 0.224s.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
alsa-utils as well as bareos-bat (as well a some Bacula packages)
all contain a program called /usr/bin/bat, which causes conflicts on
various distributions ("basic audio tester" vs "bareos administration
tool"("bacula administration tool")).
Rename to avoid conflict.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pthread_cleanup_push() takes a function pointer for void (void *).
Although it may work in most cases, we shouldn't pass an incompatible
function pointer there, as some old gcc complains:
alsa.c:560: warning: initialization from incompatible pointer type
alsa.c:562: warning: initialization from incompatible pointer type
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The local header file named as "signal.h" causes mysterious compile
error when built with an old glibc.
signal.h:27: error: conflicting types for 'sin_generator_init'
./signal.h:27: error: previous declaration of 'sin_generator_init' was here
signal.h:28: error: conflicting types for 'sin_generator_next_sample'
./signal.h:28: error: previous declaration of 'sin_generator_next_sample' was here
....
This turned out to be the conflict of signal.h; namely, pthread.h that
is included before our local signal.h also includes "pthread.h".
Since our local "signal.h" has a higher priority, it gets loaded
instead of the expected pthread's one. Then we load it again, and it
screws up.
Although it's basically a bug of pthread, it's anyway not good to have
a header file conflicting with the standard header file. So, let's
name it more explicitly as specific to BAT, bat-signal.h, for avoiding
such a conflict.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Missing include became apparent when -O3 was not specified.
Added the header to remove error messages during debug compile.
Signed-off-by: Caleb Crome <caleb@crome.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add more information about BAT utility, including design intent,
principles, use mode, hardware connection, options, example and
return value.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dynamic temp file instead of fixed temp file to store recorded
wav data, for better security.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
1. Change comment strings to make the descriptions more clear;
2. Add indent for option lines that have no indent;
3. Use a const string instead of argv[0] as program name.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use colon instead of comma to separate frequency parameters, for
in several locale comma may be handled as decimal point.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cutting down 6 message strings to 2, as translators need to work
on each different variant.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add Makefile and configures that enable BAT on alsa-utils
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions that detecting signal frequency through spectrum
analyzing.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions that converting audio samples to double data for analysis,
and functions that converting float data to audio samples for playback.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function that generates sine waveform through math lib.
The waveform can be used as source for playback or analysis.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Caleb Crome <caleb@crome.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions as main loop of playback thread and record thread.
The functions access pcm hardware through ALSA APIs.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add common definitions of macros and data structures; Add functions
that used by multiple components, such as wav file reading and writing.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add main entrance, command line parsing, parameter initiating and
thread initiating functions for BAT.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bernard Gautier <bernard.gautier@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
