This might become a Pandora's box given
the amount of obscure package managers
on the planet but these two account for
most *nix-like systems with ALSA it seems.
Added support for querying ALSA packages
installed through rpm and dpkg; tested
on ALT (rpm) and OS Elbrus (dpkg).
Suggested-by: Anton Farygin <rider@altlinux.org>
See-also: http://bugzilla.altlinux.org/38416
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
As man page says: "If successful, the sched_setparam() function shall return zero."
Without update I got this output in the syslog (journalctl):
abr 16 09:25:30 mypc alsactl[1652]: alsactl 1.2.2 daemon started
abr 16 09:25:30 mypc alsactl[1652]: /usr/bin/alsactl: do_nice:165sched_setparam failed: No such file or directory
If sched_setscheduler() returns 0, so it means that the call was successful.
Signed-off-by: Oscar Megía <megia.oscar@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The timeout wasn't really being used for anything; disabling it should
reduce idle energy consumption slightly.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Previously, things like attaching strace to a running 'alsactl monitor'
process would cause it to exit.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When doing loopback between two audio card with
same sampling frequency, I noticed slow increase
of pitch_diff.
When I changed order of get_queued_playback_samples()
vs get_queued_capture_samples(), I noticed same drift
of pitch_diff but if was decreasing this time.
This seems to be caused by non-atomic consecutive
snd_pcm_delay() invocation for playback then for
capture. snd_pcm_delay() measures delay between
read/write call and actual ADC/DAC operation.
So while we get this value for playback path in
get_queued_playback_samples(), next call to
get_queued_capture_samples() will happen a little
bit later so snd_pcm_delay() may return incorrect
value.
Be interleaving get_queued_{playback,capture}_samples()
order, we divide this small error between playback
and capture paths. I do not see any issues anymore
with one-way drift of pitch_diff.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
To zero-initialize an object, use `{0}` instead.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The `L` length modifier only applies to floating-point conversion
specifiers, and `ll` is used for `long long` integers.
Although glibc accepts %Li, musl does not and returns EINVAL.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pointer operand to the binary `+` operator must be to a complete
object type.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
They are equivalent, but __func__ is in C99. __FUNCTION__ exists only
for backwards compatibility with old gcc versions.
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add '-u,--dump' operation.
Add '-g,--group' and '-x,--nocheck' modifiers.
Add '-z,--dapm-nosort' modifier.
Allow to operate with stdin/stdout for the file input/output.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Check the return value of wget to determine if the upload actually
failed. If so, display the message about upload failure, then exit.
Do not ping the web server; the result does not indicate whether a
file upload will succeed or not.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If wget is not present, do not ask about uploading the information.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The spinner did not actually provide information about the status
of the file upload, and caused other problems: it would repeatedly
spawn new pgrep processes (without a delay between them), and it
blocked the script if any wget process was running on the system.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The gauge did not actually show the upload progress; in fact, the
dialog did not even appear until after the upload was completed.
Use an infobox instead, which will be displayed while wget runs.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The '--stdout' option is mutually exclusive with uploading the file.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read card names directly from individual procfs files, and pass them
to amixer using the '-c' option.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sorting the list of loaded modules makes it much easier to compare
two alsa-info.txt files, even if they are both from the same system
(since the order actually changes after each reboot).
lsmod just formats the contents of /proc/modules. After this script
calls lsmod, it strips everything but module names from the output.
This same result can be obtained just as easily by reading directly
from /proc/modules; then there is no need to remove the header line
printed by lsmod before sorting the output.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include numeric IDs and subsystem info in the PCI device output,
without placing them in a separate section.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function loads and parses the topology file and
saves back the structured output in the alsa-lib's format
without comments.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
While the progress bar cannot be negative, GCC concludes that it can be
and assumes tmp can be written past the end. Fixes this GCC warning:
aplay.c:1747:18: warning: '%02d' directive writing between 2 and 11 bytes
into a region of size 4 [-Wformat-overflow=]
1747 | sprintf(tmp, "%02d%%", maxperc[c]);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It also reduces compiled size slightly.
aplay.c: In function 'capture':
aplay.c:3055:34: error: '-01' directive output may be truncated writing 3
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~
aplay.c:3055:4: note: 'snprintf' output between 4 and 4100 bytes into a
destination of size 4097
3055 | snprintf(namebuf, namelen, "%s-01", buf);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3053:34: error: '-01.' directive output may be truncated writing 4
bytes into a region of size between 1 and 4097 [-Werror=format-truncation=
]
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~
aplay.c:3053:4: note: 'snprintf' output 5 or more bytes (assuming 4101)
into a destination of size 4097
3053 | snprintf(namebuf, namelen, "%s-01.%s", buf, s);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3065:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~
aplay.c:3065:30: note: directive argument in the range [1, 2147483647]
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~
aplay.c:3065:3: note: 'snprintf' output between 4 and 4108 bytes into a
destination of size 4097
3065 | snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aplay.c:3063:34: error: '%02i' directive output may be truncated writing
between 2 and 10 bytes into a region of size between 0 and 4096 [-Werror=
format-truncation=]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~
aplay.c:3063:30: note: directive argument in the range [1, 2147483647]
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
| ^~~~~~~~~~~~
aplay.c:3063:3: note: 'snprintf' output 5 or more bytes (assuming 4109)
into a destination of size 4097
3063 | snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
uint64_t evaluates to unsigned long long on 32-bit, not unsigned long.
Use the proper formats.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
